IPhone 3GS updated to 5.0.1 now running very slow?
I updated my iphone 3GS to the new system 5.0.1 and now it is very slow and sometimes I have to tap an app several times to get it to respond? Do I need to go back to the old version and can you?
I'll go backwards with my response.
Having restored my phone and reset all settings, operated phone as a new phone, didn't sync anything back onto it, etc., I installed only Tune in radion and it didn't play. I wiggled the dock cable about -the volume indicator kept changing and for a brief moment sound played. But, not for long.
I am thinking that there's something wrong with the dock connector.
Previously I had:
Checked all settings, plus switched off Bluetooth - didn't work.
cleaned headphone socket and switch on side which mutes sound - didn't work.
Restored the phone, without restoring any of my backed up data. Tested phone as a new phone - didn't work. Tried:
voice memo - this was fine
changing ring tones - this was fine
playing a song from iTunes store - not ok.
As a New Phone, installed one App - Tune In Radio - no sound. Get speaker icon at bottom, but no indication of its setting. When I click on sound mute on/off switch at side of phone, above volume controls, I see volume level, but can't control it.
Reset all settings, so had to switch of bluetooth again and re-enter WIFI. No affect on sound.
I've tried the above with and without headphones.
So, after much time wasting, my Music App and Tune in radio apps don't work, but ringtones and voice memo works.
Similar Messages
-
On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?
What version of Mac OS X?
What home page?
What browser? -
My 2011 mac mini now runs very slow. I have to wait on it to do basic things. I only have 2 GB of ram. It came with this amount and it fan fine for several years. But I upgraded to the most recent Os system and now it runs slow. What do I need? More RAM?
murphygay wrote:
I will upgrade to 8GB. Thanks for the advice. Also have an older (2009) 24" IMAC and it also runs slow with the upgrade. It has 4 GB. I think I will replace it with a brand new 21 or 27 inch. Thanks for the response.
Bill
That's one way to justify a new Mac. :-) Adding more RAM to the 2009 model is cheaper, though (but I'm guessing not as much fun). -
I installed the Safari update 6.1.1 today for Lion. Now my browser running very slow, keeps locking up & getting the "spinning wheel". It stops spinning eventually, but recurs constantly when I try to navigate elsewhere, including within this site. Screen also jumpy/almost flickering. No other browsers installed on machine, only extension used is AdBlock. Tried to search for others with this issue, but not finding it posted and machine locking up is making it difficult. Any help much appreciated!
Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Just check the box beside “Remove all website data”.
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extension, and launch Safari.
Safari > Preferences > Extensions -
Updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reacticate it
updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reactivate it.
Every time i connect it to itunes all it says is "There is no SIM card installed in the iphone you are attempting to activate." Even thought there is a sim card connected in my phone.Is the SIM from a supported carrier?
Is the device carrier locked, officially unlocked, or hacked to be unlocked?
Has the SIM been reseated? If not, try that.
Also, basic troubleshooting is reset, restart, restore. Has any of that been tried? -
My ATT Iphone 3GS keeps freezing and shutting down, now won't turn on at all. tried to do an update and restore but it froze in restore at about 20% done, waited 5hrs for it to go, it didn't. Not sure what to do or where to go (ATT or Apple) to get help, how much it could cost? HELP PLEASE!
Did you follow the steps in iOS: Unable to update or restore?
-
iphone 3gs- updated to the ios 5.0.1... since then i plugged it into itunes, an now my phone restarts itself every 3-4 minutes!!! it so annoying! its useless, i cant do anything with it. restored it 4 times and its still doing it!!! please help!!!
i contacted o2 and they said id have to pay to get it fixed after sending it away for ten days if their was a fault, when im still under warranty!! contacted apple who will get back to me!I am assuming you updated to version 5.1.1, not 5.0.1 since no legitimate version of 5.0.1 is available.
Where is this iPhone from and what means did you use to unlock it? -
My computer had reboot while my Iphone 3GS update, now it's blocked int the loading bar of the update. Help me !
J'ai trouvé la solution moi-meme, mais merci quand meme de m'avoir repondu bande de nazes.
-
My iphone 3GS updated itself to ios 6 and never started to work
My iphone 3GS updated itself to ios 6 & then things went absurd.
iphone kept restarting after showing apple logo. The issue continued even after a complete restoration. Apple service now says firmware got corrupted and so I have to pay 9500Rs (200$) and get a phone replacement of the same model. And there is no other solution.
Can anyone give any other solution or else is it worth to get it replaced for 9500Rs.
I have spend money for no real hardware issue and apples improper firmware methodology and updates...This is what I posted to someone else having the same issue:
I having the same issue about the and iTunes says "The iPhone cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.". I've had the iPhone 3GS since it came out. It was working fine until I just tried to update it. It has NEVER been hacked or jailbroken. WE AND A FEW OTHERS are having the same issue then it is more than likely that this is an update issue. I took mine to the Apple store and the tech tried to update it and he came to the same problem and told me he couldn't update it. My assumption is that we are not the only one's with this issue and that if there was a way to update it to the update before this last one it might be a solution. I don't know how to get the previous update. Apple probably is aware of the problem, and hasn't come up with a solution yet. Or, enough people haven't complained yet. The tech suggested that there might be something wrong with the phone itself, but that couldn't be since it was working perfectly before I updated it and others are having the same issue. It is highly unlikely that a lot of people are having the same hardware issue all of a sudden at the same time. Apple/iTunes needs to fix this... and hopefully soon
Also: I can update or restore my iPhone 5 and other iPhones so it is not an issue with my firewall or other software on my computer. No one touches my iPhone or my computer they are secure, locked all the time, and I have no jailbreak software on my computer (Apple tried it and they are clueless at the moment from what I can tell). -
Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
After automatic update of Firefox 3.6, it is now running VERY slowly!
After having Firefox automatically update itself on June 22, 2010, it is now running VERY slowly for me, and is taking a LONG time (10-15 minutes) to even open!
== This happened ==
Every time Firefox opened
== Yesterday,Tuesday, June 22, 2010I installed 3.6.4 on XP June 23 and had much the same experience, except Firefox 3.6.4 never finished opening, even after nearly an hour, and brought my entire system to an excruciatingly slow crawl, even though pgm mgr showed FF getting 0% and system idle with 97-98. This happened twice with a reboot in between. Finally had to roll back to a previous restore point and all is fine now, except--no new version of Firefox. I'll wait to see more feedback about 3.6.4 before trying to install again.
-
I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing. -
Mac os x lion 10.7 on mac book pro not updating and running very slow
i am using mac os x lion 10.7
problem it is not updating and running very slow. How to improve?If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage" && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {/,}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important, so don't worry about it.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type nothing in the Terminal window except your login password if and when prompted.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window. You don't have to copy the output; just paste into your web browser.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary. -
After updating to 10.6.8 internet browsing very slow
After doing the update 10.6.8 internet browsing became very slow on safari, chorme and firefox. Is there a solution to this problem.
Had the same problem
I then added some DNS servers to my network configuration and now speed is back to normal (pre 10.6.8)
This is how to add DNS servers
Find some IP address of a DNS server either from your Internet Provider or use one or more of these:
http://theos.in/windows-xp/free-fast-public-dns-server-list/
Test one or more DNS IP addresses by using nslookup
Open terminal (cmd + space type terminal)
In the terminal type
nslookup nasa.org 12.13.14.15
where 12.13.14.15 is the DNS IP server address you want to test
If it works it will respond:
Server: 192.168.1.1
Address: 192.168.1.1#53
Name: nasa.org
Address: 208.73.210.48
Now add one or more valid DNS IP address to the network settings:
In Systems settings / Network / Advanced choose the DNS tab
Press the + button and type the IP address of a valid DNS server
Press OK and then Apply
Now your browser should be back to its usual speed :-) -
Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad
Using the Mac with your iPad has nothing to do with the fact that the iPad is running slow. There could be any number of reasons why the iPad is now running slow.
Have you tried a reset on the iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Maybe you are looking for
-
Please...... I don't want to throw my MacBook out the window....Imovie HD
I just converted some of my earliest skydiving video footage from VHS tape to DVD. It plays fine on my computer, but I cannot import into imovie. The files for the DVD don't even show they are selectable, and when I try to drag and drop it states the
-
Hi, I have created team site. I have applied custom master page. But I am getting one error "The DataSourceID of 'V4QuickLaunchMenu' must be the ID of a control of type IHierarchicalDataSource. A control with ID 'QuickLaunchSiteMap' could not be fou
-
How to Insert an skype or phone call link | Adobe Muse CC
Hi - How to Insert an skype or iMessages link in Adobe Muse CC like mailto: ??
-
Frustrating missing something simple
I have an iBook G4 running 10.5.1 and I also have on this router Belkin 4 port wired an iMac running 10.4.11. I usually network these two machines quite easily and have done for some time. I recently had some minor probs and done a complete clean rei
-
Weird install problem with OS X, please help!
I've been upgrading a friend powerbook firewire 400Mhz G3, we installed 1GB of memory and put in an 80GB HD. I partioned so that OSX can be on the first 8GB, put 9.1 on the second parition of 7GB, upgraded the firmware, and i think i have tried just