IPhone 3GS volume button stuck

We have a 16 month old 8gb iPhone 3Gs and the rocker volume switch is behaving as though you have your finger firmly on 'down'
The screen is displaying the ringer icon pretty much permanently. With a lot of fiddling and patience you can eventually get it to stop but it is extremely annoying.
We have updated the software and done resets but it constantly lowers the volume.
Any advice please?

Replacement part is Headphone Jack Flex Cable #5, a $5-$10 part. One of most difficult iPhone repairs there is. Before opening and during any repair of iPhone 3GS make sure iPhone is OFF.

Similar Messages

  • IPhone 3GS volume button fell off? Which glue to use

    Hi
    My 3GS volume button fell off. It costs alot to fix it since they got to take it apart.
    I was thinking of adding glue to put it back. Has anyone done this? Any good suggestions on which glue to use?
    Thanks.

    I would recommend an out of warranty repair or a 3rd party repair company and NOT glue.

  • My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!

    My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
    I have tried to hold the "home" and "power" button to reboot
    I have tried powering it off
    I have tried, to unplug the cable, hold the "home" button and then plug it in.
    Can't check the SN or warranty, cause it is stuck in restore mode.
    Is the hard drive gone? Should there be something replaced.

    http://support.apple.com/kb/TS3694#error1
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice.

  • My iPhone 3GS crashed now stuck apple logo

    My iPhone 3GS crashed now stuck apple logo with no loading circle, I have tried holding the buttons also tried a full restore iTunes finds the phone no problem when it's plugged in thanks

    http://www.iclarified.com/entry/index.php?enid=1034

  • What shall i do? I've done restoring my iphone 3gs and still stuck on cannot activate and contact customer service.

    I've done restoring my iphone 3gs and still stuck on cannot activate and contact customer service. What shall i do? any help please.

    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.

  • My Apple iPhone 4s power button stuck up. What to do? Please help

    My Apple iPhone 4s power button stuck up. What to do? Please help

    Hi tefa006,
    I apologize, I'm a bit unclear on the exact nature of your issue. If your iPhone isn't responding or won't start up successfully, you may find the troubleshooting steps outlined in the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • IPhone 4 power button stuck, I used to be able to use it I just had to push harder to get it to work, but now it will not work at all

    iPhone 4 power button stuck, I used to be able to use it I just had to push hard, but now it will not even work at all. HELP!!!!

    You will have to get it serviced.

  • Volume buttons stuck! Any idea what to do?

    Volume buttons stuck! Any idea what to do?

    You could try leaving it in an airing cupboard for a few days to dry out thoroughly
    Some people also say to put it in a bag of rice .....
    People also argue that you should not use a blower such as a hair dryer to dry it out as this can mess things up even more
    Personally I am not interested in the bickering people have about this and when this happens to me or people I know I just leave it in the airing cupboard, probably 50% success rate....
    IF this fails and it is broken for good:
    you can take it to an Apple store and give them the iPod along with a fee and they will give you a fully functional REFURBISHED model
    or you can trade it in for 10% off a NEW model of any type apart from iPod shuffle. Does not matter if it is completely destroyed you can still get 10% off (at least at my local Apple store you can)

  • Iphone 3gs volume bar

    I have a 3GS. I am having problems with my volume bar, like on iPod or YouTube. When I try adjusting the volume, the little ball on the bar slides with my finger, but it bounces right back where it was before after I remove my finger. I did restore the phone, but it showed up after a day or so.I tryied to restore and set new iphone,same result. Anyone have this problem? Any advice?
    I cant go to apple service and i cant use any service , its complicated so please dont tell me to do so.
    its like this
    http://www.youtube.com/watch?v=ajsMXBo5fXM&NR=1
    thanks

    I have the exact same problem! My iPhone 3gs is only 3 weeks old and has latest software but the volume bar is doing my head in. It's ok with the apple supplied headphones but with other headphones and small battery powered speakers the volume bar won't adjust properly.
    You can drag it with your finger but it bounces back to the approx same place when you let go? The buttons on the side do adjust the volume but the increase or decrease in volume per push/click seems larger than normal.
    The only way i've found to get the volume bar working again is to turn off and on the phone.
    Someone clever please tell me why it's doing this. :os

  • My iPhone 3gs lock button doesn't work and my screen turned black.

    My iPhone 3GS screen just froze and turned black..normally I would just be able to press the lock button and the home button and it would fix it..but the lock button doesnt work..I'm kind of stuck...

    In case you are not succesful, there is a trick-around:
    http://osxdaily.com/2013/07/29/broken-power-button-iphone-ios-fix/

  • IPhone 3GS Home Button Issue - iPhone Thinks Home Button Is Always Pushed

    Alright, this isn't the normal(home button doesn't work) question. Listen...
    Customer brought this iPhone 3GS in to replace the non-working home button. Before I did I tested it with a working screen assembly(obviously including a new home button) and it DIDN'T work. So I replaced the dock connector and speaker/mic assembly(where the home button makes it's connection. And that still doesn't work.
    I have figured out now that the problem is NOT that the iPhone doesn't recognize the push of the home button but instead it thinks that the home button is always being pushed. When hold the power button(only) the iPhone will restart(which requires home+power).
    Since I've tried replacing the home button and the dock connector is this problem with the logic board?
    Any help greatly appreciated.
    Message was edited by: iFixItMan

    HI iFixItMan,
    I have the same problem andmine was stuck in a recovery loop and it took me about 7 hours to get workingsoftware, now I have the phone fully working the home button has no functionwhen in phone mode, I have soft reset when in phone mode and the home buttonworks (resets phone) - Power + Home button pressed together)).
    The home button also works whenthe screen is lifted from the connector for DFU mode and soft reset; I’mthinking there are two connections made to the logic board one for system(software reset and DFU) and one for phone connection.
    Not changed the dock or thescreen assembly due to thinking which part I need to buy :/, don't want to keep buying parts then having to keep them if they don't work
    Thanks again

  • IPhone 3GS - volume controls working but actual volume stays the same

    Hi
    My iPhone 3GS has been exhibiting a strange phenomenon for the last couple of days. The volume in my heaphones is fixed. I can use the volume control buttons or the on screen slider just fine, they're responsive in terms of animation (the buttons show the increasing/decreasing number of white squares and the slider allows me to move the dot and the blue line extends accordingly), but the actual volume only changes when I'm using the speaker, but not when I'm using the headphones. The only actual volume control I have using the headphones is sliding the volume down to zero, which also produces a loud click in the headphones.
    The issue is system-wide and as such affects all apps, including Spotify, iPod, VLC, various games and other music/video apps.
    The headphones in question are brand new and work fine with other equipment. I've also tried with other headphones, with no change.
    Any help would be appreciated. And yes, I've restarted the phone. I've contemplated reset/restore, but I wanted to check if anyone knows of a less time-consuming solution.
    Thanks

    No, that's not it.
    The volume is not locked using the Volume limit, and even if it were, that wouldn't explain why it's fixed at one (rather loud) level. The volume limit function is just there to limit the upper bounds, not set it to a constant level.
    Thanks for your reply, though!

  • Volume button stuck

    Hello,
    I will try to make my self as understandable as i can, since english isnt my language.
    There are 2 volume buttons on the iphone. One of them is an actual button, on the side, and the other one appears on the screen when youre listening to music. The problem is, if i use the volume ''button'' on the screen to turn the volume up, it automatically slides all the way to the left: minimal volume. I can than turn the volume up on the other button on the side. But still, this is really annoying.
    Is there anyone who recognizes this problem? Ive tried to reset the iphone when i connect it to my computer, without any result.
    I would appreciate some feedback on my problem!
    Sonny

    I had a first gen iPhone that had the same problem accept it would go full blast . The volume button had gotten stuck . the switch under the button had collapsed and would not come back up . I would say that you are suffering from the same thing . If your iphone is still under warranty I would take it to an Apple store and have them check/replace the buttons . Hope this helps.

  • Iphone 4 volume buttons not working

    iphone 4 volume and mute buttons not working, checked all settings they are all fine and when headphones in it works??? When I take out headphones the volum buttons do not work, when phone rings or text receives only vibrates???? HELP!!!!

    This could be due to some debris or dirt inside the  headphones jack that makes the iPhone think that the headphones are connected even when they are not.
    Try to see if you can clean the jack being very careful, with canned air as sold in electronics store.  Some people have been successful by introducing and withdrawing the headphones jack several times in a row to displace whatever is in there if it is lodged in.
    Avoid introducing anything else like a pointed object.  You could damage the jack.
    If all of this does not work, I would try first resetting the phone by holding the home button and the power button together for about 15 seconds or until the whilte apple appears, then waiting until the phone resets.  If the problem continues after this, take it to an Apple Store to see what they believe should be done.

  • Volume + button stuck. any help?

    Hi, I have a problem with my "+" volume button in my iPhone 4, it seems to be like always pressed althoug I cna fisically press it. This is only happening when the phone is set to ring not when its on silent mode. so when for example i put it in silent mode and get the volume level to nothing when i put it again in ringing mode it starts to increase the volume level. any help?
    thanks in advance

    Technical support for the iPhone in Argentina is provided by Claro, Movistar, or Personal.  You need to take your phone there.

Maybe you are looking for

  • How to tune a table in oracle

    hi can anyone please help me in tunning a particular table in oracle which has millions of Record kindly help me for the procedure to tune the table... thanks Regards Misin

  • Connecting to an Intel Mac remotely

    I was wondering if it is possible to use my old Mac iBook running 10.4.11 to connect to an Intel Mac running Snow Leopard remotel?   I would like to be able to control the iBook similar to how I can control my iBook remotely with my Intel Mac using S

  • Multivalue Attribute Values

    I need to be able to store these two values in the same multi value attribute: Director DIRECTOR Is there a way I can accomplish this with matching rules or some other mechanism? Out of the box they are treated as duplicate values. thanks,

  • Digested value of the canonical form of xml soap body. Help!!!

    <soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="id-168845"> <par:getBookPP2 xmlns:par="http://parkiranje"> <par:id_parkirno

  • My new desktop charger DT-33 disappointed me

    It won't fully charge and it charges for more then 6 hours I guess. I said I guess because i really don't know when the charge was finished. There is no instruction in the Manuel. There is instruction on my phone manual saying around 2 hours of charg