IPhone 3GS Will not boot after iOS 4.3 Update....

I updated my wife's 3GS last night and when it was done it rebooted and started filling up the line under the apple logo like it always does after the software is loaded but after the bar fills up, the phone locks up and does not go past the apple logo with a full bar under it. - iTunes also locks up when you connect the phone. I've tried to restore it but it does the same thing.... any ideas?

You're further than I am!! Mine's frozen on the apple with an empty progress bar. And absolutely nothing seems to be working. I've tried taking the SIM card out, tried restoring to previous system, but Itunes won't recognise the phone. It's absolutely doing my head in and I'm going out of town in the morning and really don't fancy being without my phone!

Similar Messages

  • HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    Obviously since you have iOS 7 you're a developer.  As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum.  Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
    Thanks, and best of luck to you.
    GDG

  • Iphone 3gs will not activate after restore and update

    my sons iphone 3gs will not activate after restore and ios update.
    phone keeps saying no service but worked fine before restore and update any ideas ? thanks

    Sorry. The jailbreak is undoubtedly the root cause of your problem.
    It is not always possible to repair the damage done by jailbreaking.
    Try searching google for an answer, but be prepared to just buy a new phone.

  • HT201263 iphone 3gs will not activate after restore and update?

    Please help my iphone 3 gs will not activate after restore and update.

    If it is locked to any carrier, insert SIM from the carrier. If it is unlocked insert any SIM to activate.

  • IPhone 3GS Will Not Activate After Restore

    Hello,
    Full story:
    I purchased an iPhone 3GS 3 years ago locked to the O2 network UK.
    Throughout the years this phone has been jailbroke and unlocked on numerous ios versions.
    I have decided to fully restore my phone so I can take advantage of the 6.1.3 update and realise that the phone will be locked back to O2.
    I have bought an O2 pay and go sim in preperation and have fully restored the iphone.
    I progress through the configuration menus at the beginning and the phone is picked up by itunes but after a while of trying to activate the screen says:
    [quote]Your iPhone could not be activated because the activation server is temporarily unavailable.  Try connecting your iPhone to iTunes to activate it, or try again in a few minutes.
    If this problem persists, contact Apple Support at apple.com/support[/quote]
    As stated the phone is connected to iTunes already, aswell as WiFi, and the O2 sim card is in the phone.
    Can anyone please assist as to why this is happening as an hour ago the phone was working fine (pre restore) and now this.
    Many thanks in advance
    D4

    The hack used to unlock it has rendered it unable to activate at all. Apple's servers can detect the hack and have disabled activation. Even on the carrier it was originally locked to. You will have to contact O2 and see if they will authorize a legitimate unlock.
    There is no other advice we can offer. You have forfeited all rights to support by hacking and jailbreaking the phone.

  • IPhone 3gs will not activate after restore, NEVER HACKED/JAILBROKEN! Help!

    I've recently tried to update to the newest firmware, And my iPhone 3gs, Which has, and I will add emphasis, Never Been Hacked or Jailbroken! , Messed up and I had to factory reset the device. All wen't well with the restore, until I attempted to Activate said device, to which it stated it could not connect to the server to activate the phone! So, I attempted to do it the iTunes way, and yet again, It could not connect to the server.
    I have the latest version of iTunes, Tried it on multiple computers on the home network, also tried it on a completely different network, every time, the same answer.
    And to top it all off, My "backup" on iTunes that I did every week to save my pictures/music/videos, in case of this type of event, Has also been completley erased.
    I am at a huge loss, I have no idea what to do! I hope someone can help.

    Sorry. The jailbreak is undoubtedly the root cause of your problem.
    It is not always possible to repair the damage done by jailbreaking.
    Try searching google for an answer, but be prepared to just buy a new phone.

  • IPhone 3GS will not activate after IOS5 update it says there is no SIM

    I tried updating my iPhone 3GS to IOS5 and it is saying the activation server is temporarily unavailable and then iTunes says there is no SIM but there is.

    Here's what you do
    1.Make sure your phone is not plugged into the computer.
    2. Put the iPhone into recovery mode (this is NOT DFU mode). Do this by
         a). Hold down both the power/sleep button and the home button until the screen turns black/off
         b). As soon as this happens release the power button but NOT the home button
         c). If done correctly then the Apple logo will appear, KEEP HOLDING THE HOME BUTTON and eventually a connect to itunes graphic will appear. You can release the home button
    3. With the connect to itunes graphic on the screen, plug your phone into the computer. iTunes will start up if it is not already on, and then will say the phone needs restoring. Ignore this and COMPLETELY quit iTunes.
    4. With iTunes off and the graphic still on the phone screen, hold down both the power/sleep and the home button again for 9 seconds (count 100, 200, 300...) or until the screen goes black
    5. When the screen goes black release the home button straight away.
    6. It will start up with the iPhone activation screen ignore this. iTunes should have started up, if not do so. Go to the iPhone tab and either resotre from backup or set up as a new phone.
    You're welcome

  • My iphone 3gs will not charge after battery replacement

    Hey
    I've had an iPhone 3gs for almost two years now. Recently I shattered the screen and cracked the back. Last summer I broke my led screen and paid 250 to get a new phone from apple. To avoid this cost my dad decided to order parts online and fix it himself. He is one of those do it yourself dads. After watching tutorials and taking my phone apart he replaced the parts and put it back together (Parts included a new screen, a back, and a battery). Once we finished we plugged the phone in and what happened was that it would be stuck at the charging screen with a think red line. Every once in a while it attempts to turn on, the apple icon appearing but once it finished that it flashes my homepage and turns off. It constantly repeats this.
    I've gone through a TON of pages but have had no success in finding a solution. We've tried rebooting my phone (it doesn't work), restarting my computer, multiple plug-ins, basically everything. When plugged in to a computer, iTunes is unable to detect my phone. Any other suggestions?
    Any advice would be MUCH apprectiated. Thank you

    Nevermind guys, figured out it was a fault in the battery. We took my old battery out of my old phone put it in, sure enough it worked:)

  • 2012 MBP will not boot after 10.8.4 update

    Has anyone else had problems with booting to 10.8.4?  I have a 2012 15" MBP with dual boot 10.8.4 and Win 8 via BC on a single Seagate Thin SSHD 1TB.  Win 8 will boot but the OS X drive will not even mount during boot.  I tried single user, verbose, safe, fsck, DU, recovery all to avail because the system no longer recognises the drive because it will not mount.
    Now, this same thing happened two weeks ago and I eventually replaced the stock Hitachi 1TB with the aforementioned Seagate.  I am now using the Hitachi as an external drive and it is working just fine after erasing/formatting. I refuse to believe it is a HDD issue seeing how Windows still boots fine. 
    Does anyone out there have a long term solution?  I cannot believe that I need to completely wipe my drive every two weeks and reinstall/restore/recover my system.  I never had this problem prior to updating to 10.8.4.  Any help would be appreciated.

    same **** happend to me after I updated my retina macbook pro I had to take it to the Apple store to have it reinstalled and updated

  • IMac will not boot after 10.10.2 update

    Hello all, I could really use some help. I downloaded 10.10.2 from the app store on my iMac (previously upgraded to Yosemite through app store), and when the system restarted, I would see the white screen with the apple logo and the progress bar about a third of the way across. then the system would ether restart or hang. Here is what I have done so far.
    1. I am unable to boot to recovery mode using 'command R'... nothing happens and it goes back to the apple logo and a progress bar that get to a third of the way and stops.
    2. I am able to press 'option' during boot and get 3 options for loading (system, recovery, and a Yosemite install disk i made on a USB). selecting any of these options returns me to the apple logo and the progress bar that gets stuck at a one third complete.
    3. I am able to select safe and verbose mode. the machine will sometimes get all the way to "system up time in milliseconds" before it reboots.
    4. I am able to boot to single user mode. I have run '/sbin/fsck -fy' until it no longer displays 'modification have been made' and it displays 'volume appears to be ok" (takes 2 runs). from here i have tried both rebooting, and exiting, both result in the white screen with the apple logo and the progress bar getting to a third of the way.
    5. i have tried clearing the NVRAM
    6. I don't have another mac with firewire or thunderbolt to try targeted disk mode
    7. i have had 1 success in getting to the log in screen using verbose mode. during the boot there was a whole screen of the same line repeated many times, it said "BUG in process suhelperdt[167]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external). after i logged in it reported that the system has un-expectedly shutdown, and that it would send a report to apple (is this a kernel panic?). i hit  yes and then show the details. then the system hung up, and rebooted. then hung up again during boot with the same "BUG" message above.
    I've got good time machine backups, and don't mind doing a complete reload if i can ever get to that option.
    Thanks in advance for the help.

    I have a 27 inch imac (10,1 late 09) that was doing the same intermittently during 10.10.2.  In a fit of frustration, I updated yesterday to 10.10.3 and now the computer is doing exactly as you describe.  I cannot get past the white screen at all.  I have booted into recovery, verified and fixed the drive even though it it checked out fine.  and attempted a fresh download on a clean partition.  nada...   i can get into safe mode, and I tried installing the SMC fan control, switching off transparency, and lowering my resolution.  none worked. 
    I was convinced my hard drive was dying (when I had 10.10.2), and replaced it last week with a SSD.  The SSD ran great for about a week, then had the same problems.  I never had a problem with 10.10.1 or prior.  I have checked my ram, and that does not fix the problem (swapping all four into the front dime slots in sequence). 
    This computer has run great since 09, and I have never had any issues until now, but it is now a very expensive paperweight. I cannot do the internet recovery that sets up the original OS the machine shipped with (too old for that feature), and it will not let me download a previous version of OS X from the app store (I have mavericks, lion, etc there). 
    I think my apple love affair is officially over.  Looks like i will be searching for a pre-yosimite computer to download a usb version of mavericks or lion, and I sure as **** am not buying another apple product in the near future! I was very close to pulling the trigger on a new macbook, sure glad I did not waste my money -again-.

  • HELP Mac Mini will not boot after 10.5.1 update

    After I tried installing 10.5.1 I received a warning message that the update will not be installed because of an error and I should contact the vendor. After that the Mini tries to reboot. It keeps repeating the process over and over. I have tried to do safe boot mode by manually turning off the computer and then restarting while holding shift, but nothing happens. Can anybody help?

    BBlades wrote:
    I think the problem might be with the external HDD I am running with this machine. I am reinstalling everything now from my time machine backup. I just added this hard drive the other night and it is loud as all **** and I believe it is why my machine has crashed. Before I added the drive, my system was running pretty good. It is a Calvary 160gb drive. I think I am going to have to send this POS back to newegg and get myself another Lacie drive, because my other Lacie is running smoothly.
    I'd go with the LaCie. I got two from Amazon, 320 and 500 and both are quiet, have 800MHz FW and I have had no problems with either of them. The new one also has a 3-position switch - Off/Auto/On which allows it to sleep when not being accessed when in Auto.
    I suspect that your external HD was the problem all along.

  • Exchange email will not work after IOS 5.1 update. Anyone else having same problem. Its been three days now I cannot get mail.

    Exchange Email not working on Iphone 4S is anyone else having the same problem and is there a fix for this?

    @ w3nitro
    I'm having the same issues, except only one of my Exchange accounts took a dive after upgrading to iOS 5.1.  My Gmail account (set up as Exchange) works flawlessly but my native Exchange account (work e-mail) stopped working after the update.
    Post update to 5.1:  (work Exchange account) I could view my inbox and view individuals emails in the inbox, but I was unable to send any emails.  Mail started asking for my password after the update (for the affected Exchange account) but once entered, it failed to verify.
    I completley removed the Exchange account and rentered all the account settings but again, failure to verify any information.  I was hoping my password might have changed but it did not.  Also, maybe the IT guy at the office (not very bright) changed some settings but the only difference is the new iOS update.
    And while playing with the iPhone trying to make it work again, I noticed something really weird.  Old emails (2-3 weeks) from multiple email accounts to include the inop Exchange account started showing up again on the pull down notification menu.  I would clear these out of the notificaion menu but they always kept reapearing; very strange. 

  • Brand new Mac Mini will not boot after 10.6.6 Update

    Problem is exactly as described here: http://forums.macresource.com/read.php?1,1069909,1070656
    The 1st restart was fine then it restarted for the 2nd time & it got to the gray screen with Apple logo & spinner. It sat there much longer than it ever had before then the Apple changed to a circle with a slash.
    I tried booting into single user mode and it is hanging "waiting for root device"

    Sounds like maybe your disk died.
    I suggest that you boot from the install DVD that came with your Mac and run AHT to check it out.
    Allan

  • My iphone 3gs is not active after update ios 6.1.2

    my iphone 3gs is not active after update ios 6.1.2
    plz ans. me....

    You can only purchase apps and other media for the county's sore in which yu are located. You account, included payment method, also must be associated with that country.
    Sam applies for updating apps. Note that not all apps are available in all country so y will not be able to update an app if you are in another country and that app is not available in that country or your account is not associated with that country.
    You can change the country and other things by:
    iOS: Changing the signed-in iTunes Store Apple ID account

  • Iphone 3gs will not turn on after attempting a factory restore

    My iphone 3gs will not turn on after attempting a factory restore, all that happens is the apple logo appears the timer goes round then stops.  It then switches itself on and off several times to no avail.
    The only way I can turn it off now is by holding the off button and the home button, but then it goes into the cycle again.
    Any advice gretly appreciated.

    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • Leading zeros

    Hi Gurus how do i remove leading zeros before filed i have tried the ALPHA Converstion it did not work please help i m new in BI explain tthe whole procedure if we have to use any abap routine/ thanks

  • I don't see a "stop" option or button in the Beta. Where is it?

    There used to be a "Stop" functionality for stopping the browser from continuing the download of a web site. This is useful, but I can't find it in the Beta. Where is it?

  • Video and Audio Stutter

    I am having problems where my shows are stuttering when I am watching them. I thought it was just the recordings but also noticed it happening when watching live. It happens randomly on all different channels. I only watch HD so don't know if this ha

  • Color picker stuck in 32 bit float mode

    I cannot get my color picker to go back to 8 bit mode. Places I have gone to make sure its set to 8 bit mode info comp window > color options > set project working space file > project settings. Despite all of them being 8 bpc, it is staying in 32 bi

  • Need notification while editing shared contributor data file

    Hi, I need to show message when I am changing contributor file, when it is shared via other component also. Please check following use-case: We have UCM web portal template T1. We have number of pages P1, P2, P3, P4, etc using Template T1. T1 Templat