Iphone 3gs will not open apps after upgrading to ios 4.3.3

I upgraded my iPhone 3gs to iOS 4.3.3 last night and now it won't open apps that aren't original iPhone apps. The apps open for just a second and then it goes directly back to my homescreen. Any suggestions?

same case.. upgraded my 3gs to ios 4.3.3 and it does'nt open any apps. anyone?? please help us to resolve. thanks.

Similar Messages

  • Iphone 3gs does not sync music after upgrading to IOS 5

    I upgraded my Iphone 3GS to IOS 5.  This introduces Icloud. Since doing so, I have not been able to sync my music.  I get the error message "unable to sync - not enough free space (additional 8.4 GB required).  This is the same size as the music I want to load to my phone, which was fine before the upgrade.  Any help gladly received.  Thanks

    Does anyone have any solution???
    Reply ASAP...
    My iPhone has turned into an iPod since l upgraded...

  • IPhone 4s will not back up after upgrading to IOS 8.1

    My phone is supposed to be backing up automatically, but I keep receiving a message saying that I have not backed up in over 4 weeks.
    Each time I try backing up manually, the screen pops up asking for my ICloud ID and password, I enter that, then it looks like it starting the backup, but then the screen pops back up asking me to sign in again.  It seems to be in a virtual loop that will not allow my phone to complete the backup.

    Hello Brenden,
    I followed all the troubleshooting tips.  Everything is set properly, so my phone should be backing up automatically, but is not.
    When I try to back up manually, it will start, then a pop up asks for my ICloud Password (again! which it already did), I enter the password and it returns me back to the screen that gives me the option to back up manually.  The message at the bottom say "Last Backup could not be completed".
    I keep going through the same motions over and over and over again with no results.
    I am in a perpetual loop with this and the phone will not back up, either automatically or manually.
    -My device is connected to a power source (the computer)
    -The device is connected to the internet (my home Wi-Fi)
    -The device screen is locked
    Is there a way to go back and down load IS 06?  I did not have these problems until I upgraded to IOS 8.0, then 8.1.
    I thought the bugs were FIXED!
    As you can tell, I am quite frustrated with this problem and am concerned that I am unable to back up my phone.
    Can someone please help!
    Thank you,
    Cweiss2

  • Iphone 3gs will not turn on after attempting a factory restore

    My iphone 3gs will not turn on after attempting a factory restore, all that happens is the apple logo appears the timer goes round then stops.  It then switches itself on and off several times to no avail.
    The only way I can turn it off now is by holding the off button and the home button, but then it goes into the cycle again.
    Any advice gretly appreciated.

    http://support.apple.com/kb/HT1808

  • HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2

    My iphone 5 does not ring anymore after upgrading to ios 7.0.2.  It did not happen right away, but maybe 2 weeks ago.  I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in.  I also turned my phone off and it still only vibrates when calls and messages come in.

    I found another feed and said there is a silent button next to volume bar.  That was the problem.

  • IPhone 4 does not catch signals after upgrading to iOS 7

    I am a iPhone 4 user. It does not catch proper signal strength in home after upgrading to iOS 7 whereas it does catch it on the outside. It worked perfectly with previous iOS versions. Please help me out.

    Does anyone have any solution???
    Reply ASAP...
    My iPhone has turned into an iPod since l upgraded...

  • IPhone 5 will not open apps - tried everything.

    After getting a new phone, I backed up my old one and then started the new one as a restoration of the backup. Can't use any apps. I've tried deleting, syncing, restoring, purchasing a new app, still doesn't let me open an app.

    Firstly, you will have to check what was the iOS version that you had during the backup of your old iPhone. Please let me know if you are not able to open default apps or all the apps? Also, let me know what happens if you are trying to open apps?

  • LR2.2 will not open catalogue after upgrade

    I have been using LR2.2 (OS X - latest, on Unibody MacBook 2.4Ghz) for a few weeks, and found it an improvement. I have put my 1000 Christmas photos on it for the moment, in a temporary catalogue.
    I have just tried to open my old LR1.4.1 catalogue, containing about 30,000 images. It appeared to upgrade the catalogue OK, but failed to do a backup (quoting disc space or permissions as possible causes, both of which are untrue as far as I can see). Then it said it could not open because of a problem switching modules.
    I have deleted it and tried again a second time, allowing LR2 to create its own new folder for the new cat, but it still doesn't like it.
    For a x.2 release, I am rather unimpressed. If I cannot open my old catalogue with all its keywords and collections, there is no point in upgrading to LR2.
    Any solutions, or do I just save money and stick with what I have?
    best
    Nic

    I can't be expressing myself very well. LR is completely unable to do anything. It has not frozen: I still have File-Edit-Window-Help menus which pull down immediately. Mouse-rollover of the modules make them change colour, and the double monitor panel actually sort of works.
    But apart from that I can't get any response. (Note I have been using LR2.2 with a new catalogue for a few weeks, and have used LR1 from the start, so I know how to use the software, broadly speaking.)
    Tab does nothing. And there is no way of getting further than the screen shots I just posted.
    I will look into deleting the plist file.

  • IPhoto library contains lots of gb but will not open pictures after upgrade to iPhoto ´11

    Upgraded from iPhoto ´08 to iPhoto ´11 (9.5.1) and to OS Maverick (10.9.1).
    In "Finder" the library still seem to contain lots of gigabytes of data, but when iPhoto open the library it reads 0 photos. I have tried rebuilt (option+cmd key when opening iPhoto), iPhoto library manager, I have purchased aperture which acts just like iPhoto. Quite a few pictures missing, starting to become desperate - anyone with other ideas? Any help appreciated!
    Thomas

    Give this a try:
    Starting over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1. Open the library package like this.
    2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
    3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
    This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
    Note:  your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • My iPad 2 will not update apps after upgrading to the new ios

    MMy apps will not update nor can I install new apps. Anyone have a solution?

    Um are you logged in and connected to the internet?

  • My IPhone 5 is not booting up after upgrading to IOS 7.1.2

    Hi All,
    I have upgraded my iphone 5 to IOS 7.1.2, after installation of new software device is not booting up.. i could not power off/on the device, it struck... non of them are working .. could some one ple

    Hi rajap,
    Welcome to the Apple Support Communities!
    I understand that you noticed your iPhone will not respond after updating the software. In this situation, I suggest following the steps in the attached article. Steps 5 and 6 may be most relevant to you in your situation but I would still start with number 1 and work down.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Have a great day,
    -Joe

  • My iPad2 will not play videos after I upgraded to IOS 5.1.1.  How can I fix it?at?, My iPad2 will not play videos afteri upgraded to IOS 5.1.1.  How cani ix that?

    I have an ipad2.  Ever since I upgraded to the IOS 5.5.1 I am having problems playing videos on Netflix or YouTube.  I do to have this problem on my laptop, so it isn't in my wireless router.  I have cleaned out the cache on the iPad and that didn't help. I've restarted it too. 
    I hope someone has an idea how to fix it.  I'm lost without it now.
    Thanks.

    Do the videos start to play and quit? Do they not start at all?
    Close all apps and restart the iPad and then try YouTube or Netflix again.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You can also try resetting/rebooting the iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Even if your the internet is OK with other applications doesn't mean that there isn't an issue with the way that the iPad is connecting to NetFlix and YouTube. You can always try rebooting your router - unplug it for about 30 seconds and then plug it in again.

  • ITunes not syncing apps after upgrading to ios 5 - Help :(

    I downloaded the firmware for ios 5 as it took 60 mins to download last night, and when it got to 10 mins, it errored. I backed up everything, and it gave me the option to restore backup once i had installed the new ios firmware.
    However, all it gave me was my contacts and photos. In my itunes library, i have all my apps there, but i am unable, after 2 hours, to find a way to get the apps in my itunes to go on my ipod. I tried nearly everything:
    Unticked manually manage music and videos
    Restored old back up
    Googled for over an hour
    Authorised my account
    Restarted computer several times
    Uninstalled/reinstalled iTunes a few times
    Pressed "sync" over 50 times
    All my apps are in my library and i have found all the .ipa files on my file browser. The problem isn't redownloading all my apps again, its all the saved levels, settings etc on my games/apps. Here is a pic of my itunes if it helps... http://i51.tinypic.com/34gq1b4.png
    Many thanks in advance,
    Yoni

    I'm having the same problem ! Each time the sync starts it suddenly stops and says finished syncing

  • My apps will not open now after syncing to itunes. What do i need to do to use them again?

    my apps will not open now after syncing to itunes.  What do I need to do to get them to work again?

    Sounds like you need to restore the iPhone >  iTunes: Restoring iOS software

  • Iphone 3gs will not activate after restore and update

    my sons iphone 3gs will not activate after restore and ios update.
    phone keeps saying no service but worked fine before restore and update any ideas ? thanks

    Sorry. The jailbreak is undoubtedly the root cause of your problem.
    It is not always possible to repair the damage done by jailbreaking.
    Try searching google for an answer, but be prepared to just buy a new phone.

Maybe you are looking for