IPhone 4 4.3.5 sends mms but won't receive mms

I just bought my iPhone 4 a week ago. At first I couldn't send neither receive any mms, but I messed around with the settings and now I'm able to send but I can't receive. It gives me a message saying "no subject the media content was not included due to a picture resolution or message size restriction." anyone know how to fix this problem?

See if the following post helps out: http://supportforums.blackberry.com/rim/board/mess​age?board.id=8100&thread.id=7540
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

  • E72 sends email, but won't receive

    I posted this last week at the end of a year old post, but only received word from the original poster telling that his fix was to get an I-Phone. After many years of dealing with Nokia idiosyncrasies, several months ago, I too gave up and got an I-Phone. It is beautifully reliable. Unfortunately, my daughter's phone died, and a friend gave me a new E72 for her. It looks like I'm back to Nokia reliability. Can anyone help restore my continually fading faith in Nokia? Here's my problem:
    I've set up email manually, through the set up wizard, and I'm attempting to point "Sync Email " to one the of many accounts now in my phone. The email accounts can send, but won't receive. I have gotten into a never ending loop:
    The help screen says to "To start synchronising email messages between your device an the e-mail server, select options>synchronise" However, there is no "synchronise" under options.
    If I go into "messaging">options>settings>email", all the emails accounts that I have created show, but if I go into "messaging">options>settings>sync email", it shows "Mailbox in Use" "None".
    When I click on "none", I get the message "No Mailbox defined. Define now?
    Sure, I'll try it again. I click "yes"
    My old friend the email set up wizard appears. Create another account.
    Goto 1
    I've contacted Nokia. First, I was told to pull the battery and wait 5-10 mins. Same problem. Next, I was told to do a factory reset. Same problem. Finally, I was told that if it wasn't a tested pop3 (gmail, yahoo, etc), Nokia doesn't support it. I doesn't seem to matter that every Nokia I have had in the past work with my email server.
    Has anyone found a Nokia-based solution to this problem?
    Thank you for putting up with my frustration and for offering any possible solutions that you can suggest.
    John

    Hey Jason,
    I have ran into this situation quite a few times in my experiences with fax issues,  it very well could be the digital line itself. My last suggestions for you would be to try a power reset on the printer, and also try a filter on the fax line to see if that could help the line. If you are still having issues with sending faxes, give us a call to our technical support to see if there are any more options for you.
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Here is an example of a filter:
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a great Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Officejet Pro 8600 Plus, N911g sends faxes, but won't receive

    Hello,
    My printer will send faxes, but not receive them.
    Windows 7 Pro 64 bit, SP1.  The printer is connected to the computer via wireless.  The phone is Comcast Digital Voice.  The printer is the only device connected to the phone line.  Per techs at Comcast, the phone line is functional.
    I ran a Fax Test via the printer, and all items read "PASS".
    I completed all the steps in the following link, "Cannot Send or Receive Faxes" found on the support forums, EXCEPT resetting the printer by unplugging the power cord while the printer is on.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02891758&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
    As per the instructions,  I sent a fax to the HP Fax Test Service.  The outgoing fax appeared to connect properly and send, as I heard the dial tone and connection sounds, and I received a fax confirmation, result "OK", from the printer. However, the return fax never arrived.
    I also confirmed that the number set in the fax header in the Basic Fax Setup, is indeed my phone line number.
    Any assistance would be greatly appreciated!
    Thank you,
    Jason

    Hey Jason,
    I have ran into this situation quite a few times in my experiences with fax issues,  it very well could be the digital line itself. My last suggestions for you would be to try a power reset on the printer, and also try a filter on the fax line to see if that could help the line. If you are still having issues with sending faxes, give us a call to our technical support to see if there are any more options for you.
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Here is an example of a filter:
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a great Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Hey anyone know of a way to set up gmail on the iPad or iPhone that it only sends mail but does not receive

    Hey please let me know if you know about this

    Shlomo-
    My Usenet Newsreader program (MT-Newswatcher) has a mail client capable of sending messages through my mail account, but is not capable of receiving mail as far as I can tell.  However my mail account does receive mail.  If there is an mail account not capable of receiving mail, I don't think Gmail is it.  But that doesn't mean you have to read it or download it to your computer.
    My incoming mail resides on an AOL server.  My old AOL mail client only shows basic information like title, date received and who it is from.  The mail is not actually downloaded to my computer until I open it.
    Other mail clients such as AOL Desktop and the iPad mail App, do download the mail to your computer or iPad, whether you read it or not.  So the answer to your question may depend on your mail client and how you define "does not receive"!
    Fred

  • My iPhone 5 will not send photos but will send text. I went to settings and everything seems good to go but I cannot send photos to anyone via messages...please help

    My iPhone 5 will not send photos but will send text. I went to settings and everything seems good to go but I cannot send photos to anyone via messages...please help

    When you said you went to Settings and everything seems good. Does that mean the MMS was turned on? If so, and this is only being experienced when dealing with SMS/MMS, then you should contact your carrier to have them check to make sure your account is provisioned for MMS, and that everything is alright with your account. SMS/MMS is a carrier function.

  • My new iPhone 5 will connect to iTunes, but won't let me put music or pictures onto it...

    My new iPhone 5 shows up in iTunes, but won't let me put pictures or music onto my phone. They are both under the same iTunes account and it let me transfer stuff onto my old iPhone 4 before. I don't know why it won't let me now. Both are updated also... Please help!!

    Thank you so much! I can't believe I didn't think to check that. I synced it to iTunes, but I didn't think to see if those were checked or not and they weren't. I checked them, and resynced and its working perfectly. Thanks so much!!!

  • KIN One m won't receive mms messages

    My KIN ONEm won't receive mms messages, I've had the problem once or twice before and every time it's happened it shows this error message "someone sent you a message but it can't be retrieved right now" with the error code "3-4003" it's fixed itself in recent times, but this time it's been going on for a few hours and it won't get fixed, what should I do?

    I had the same problem and fixed it by going into:
    settings, wireless & networks "more", mobile networks, then you need to "enable" data access over Mobile networks
    It will then have a check mark on "data enabled"
    After I did that I immediately was able to send and receive MMS.

  • My ipad can send email but I cannot receive or see incoming mail

    My iPad air is was updated yesterday with iOS 8.2.  Now I can send emails but I cannot receive or see any mail in my inbox.  My iPhone 5S works correctly but has not been updated with 8.2.

    Hi, Grandpaintraining.  
    Thank you for visiting Apple Support Communities.
    Here is an article I would recommend going through when experiencing issues with mail.  I would also recommend checking with your email provider for security procedures such as two-step verification as this could cause this issue. 
    Get help with Mail on iPhone, iPad, and iPod touch
    -Jason H.

  • I was sending text messages this morning but all of a sudden I stopped receiving them.  I have found out that I can send them but can't receive them.  Can anyone help me?

    I was sending text messages this morning but all of a sudden I stopped receiving them.  I have found out that I can send them but can't receive them on my mac book or on my wifes mac book, but can receive my messages on the iphone!!!   Can anyone help me?

    If you're referring to iMessages, then the problem is that Apple is having server issues. If the problems your having are with standard SMS, post back with further details.

  • I can't send messages but I can receive them

    I can't send messages but I can receive them, is it an iOS 7.0.3 issue or Verizon Wireless? Also not receiving data

    Hey Bonaccio,
    Thanks for the question. I understand you are experiencing issues with Messages on your iPhone 5. The following resource may help to resolve your issue:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    I also understand you are experiencing issues with your cellular data connection. These two issues may be related, so definitely give the steps in this article a go:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
    1. Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
    2. Restart your iPhone.
    3. Ensure that your software is up to date:
              - Check for a Carrier Settings Update. Tap Settings > General > About.
              - Check for an iOS Software Update. Tap Settings > General > Software Update. Note: Some updates may require a Wi-Fi connection.
    4. Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
    5. If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
    6. Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
    7. Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    8. Restore the iPhone as new.
    9. Contact your carrier to:
              - Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
              - Verify that there are no account-related blocks.
              - Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
    If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
    Thanks,
    Matt M.

  • How do I set up LiveRig or TouchOSC with Mainstage 2.2.2? Both apps send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI?

    As I said before both app's send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI on the network set up, which I think I did right. I have tried MIDI Disigner and Mainstage shows MIDI activiti, what can I be doing wrong?
    Thanx in advance.

    I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
    In my experience, do not use UBE for anti-relay.

  • Moved to a new house and now i can't send emails but i can receive them

    I just moved to a new house and now i can not send emails but i can receive them...

    New houses can do that. 
    We need more info - what email service is this issue about.  Do you use several (gmail, yahoo, icloud,...) and is this issue the same for all?  If you also use a computer or other device, is this issue common to them all?

  • When I set up my mail I could send emails now a day later I can not send them but can still receive them ... I can't see what is wrong .. Any answers .

    When I set up my mail I could send emails now a day later I can not send them but can still receive them ... I can't see what is wrong .. Any answers .

    It's not a good idea to use a network disk for both Time Machine backups and other things.  By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files.  I'd store those other files on an external disk connected to the Time Capsule.  The problem with that is that Time Machine will only back up files that are local to your Mac.  That means that you'll only have one copy of the files on or attached to your Time Capsule.
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • I am using a free wifi in a hospital.  I can send email but I cannot receive any including emails tat I send to myself.

    am using a free wifi in a hospital.  I can send email but I cannot receive any including emails

    Could you receive emails when connecting to another network?

  • My i phone 4 will send messages but does not receive them - why?

    My i phone 4 will send messages but does not receive them - why is this?
    e mail works both ways

    Did you already check the general troubleshooting for messages here?
    http://support.apple.com/kb/TS2755

Maybe you are looking for

  • Reccomendations needed for NVIDIA GeForce 7300 GT replacement.

    I just had my third NVIDIA GeForce 7300 GT graphics card fail (got them replaced through Apple Care which has now expired). I need to get a replacement graphics card but do not want another one of these! Specs on my '07 Mac Pro:   Model Name:    Mac

  • For the Primary Key Field with the combination of other fields

    Hai I Have a problem in creating trigger for the following the problem goes like this.. i have a table with the fields fld1 (varchar2(6) fld2(varchar2(20)) fld3 (number) the fld1 is a primary key. here in this table i am inserting the values .. At th

  • How to get the IP address of RMI server???

    Hi: Is there a way to know the IP address of RMI server before client and server connect? I am assuming that client didn't know the IP address of the server. Because I know that client must hold a server reference so that client can connect to server

  • API for connecting  to an external database object

    Hi, Can anyone provide me with the API for connecting to the external database table and to create , update and delete data with an Oracle external database object. Wish you great time. Best Regards Sid

  • KM Discussions iview

    Can anyone please give me a few lines on how do we describe a KM Discussions iview, surprisingly i havent been able to find a single pdf or word doc can anyone help me with a doc abt this please.. Regards Sunny