Iphone 4 Battery, Hardware problems? Please Help.

When you turn my Iphone 4 on, it only gets to the loading part with the apple logo, then turns off and does it all over again. It also only does this if it's on charge, but it doesn't actually seem to be charging. Do i need to restore my phone? Please Help. Thanks

This is one problem within the DirectX 9.0b:
Please take a good look at this update for Microsoft DirectX v9.0b:
http://www.microsoft.com/downloads/details.aspx?FamilyID=8dfd1b6d-e177-4a0e-91d0-b4310675b02b&DisplayLang=en
Possible Issue Description:
- TV-Tuner card cannot keep TV-Tuner settings in memory;
- TV-Tuner card cannot be initialized in system after installing DirectX v9.0b;
- TV-Tuner card cannot capture any picture;
Official Microsoft Information:
DirectX 9.0b was released on 7/23/03 to address the MIDI security issue identified in bulletin MS03-030. A small number of non-security fixes were also included in the release. One of these fixes caused several TV Tuner capture card/driver combinations using video formats other than NTSC (NTSC-J, PAL, SECAM) to no longer initialize correctly on Windows 2000, Windows XP, and Windows Server 2003. Symptoms include loss of capture functionality and potential inability to set/retain device capture settings. This hotfix, documented further in Knowledge Base article 825116, has been issued to correct the flaw.
I believe that your SB card is sharing IRQs with your Firewire hardwares thus causing errors.

Similar Messages

Software or hardware problem, please help

I have my MacBookPro(early 2008) 2,6 Ghz Intel duo. 4 Gb 15 inch, with all the updated software....It was getting slow, so I used the disk utility to check the and try to to solve problems I found this
el archivo SUID “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” se ha modificado y no se reparará. (the archive has been modified and will not repaired.)
I also run ONYX and have the same answer.
After that finding the mac doesn´t start, no signals on the screen, the disk makes noise but nothing happens.....I find out that MBP, has a video card that after a few years stops working, because I found that message I am doubting of a Hardware (videocard) or a system problem , any help ?
I just bought an imac to transfer all my work as I used that computer as a desktop.....but I wanted to recover the data and make it work to take it to work.....
Any help will be great !
I have an important presentation next january and I need to recover the data....
Message was edited by: Oriol LLena

Connect the Time Machine backup drive to the iMac. If you've never started up the new iMac, then when you do you will enter the Setup Assistant where you can opt to restore from a Time Machine backup. Just follow directions.
If the iMac has already been through the Setup Assistant, then open Migration Assistant in the Utilities folder and use it to migrate from the Time Machine backup drive.
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
1. Classic Environment, and subsequently any Mac OS 9 or earlier applications
2. Screensavers written for the PowerPC System Preference add-ons
3. All Unsanity Haxies Browser and other plug-ins
4. Contextual Menu Items
5. Applications which specifically require the PowerPC G5 Kernel extensions
6. Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
1. Intel In Macs
2. Apple Guide to Universal Applications
3. MacInTouch List of Compatible Universal Binaries
4. MacInTouch List of Rosetta Compatible Applications
5. MacUpdate List of Intel-Compatible Software
6. Transferring data with Setup Assistant - Migration Assistant FAQ
7. OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake
      or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and
       registration screens, but do NOT migrate data over. Get to your
       desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
a. MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch,
      http://support.apple.com/kb/HT3224;
      Late 2008) - What to do if migration is unsuccessful;
b. MacBook Air - Migration Tips and Tricks;
c. MacBook Air - Remote Disc, Migration, or Remote Install Mac OS X and
      http://support.apple.com/kb/HT3224; wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

Powermac g5, Hardware Problem PLEASE HELP - I MIGHT GET FIRED

My work computer, G5 powermac, case was damaged. Ordered a new one, transfered all components, but now it won't start up. I am so screwed. When I plug it in, I hear a click. Nothing happens when I hit the power button. Any ideas. Please help. I might get fired over this. Are there any specific hardware related reasons my mac wouldn't start up? Please help.
Adrian

If the power supply was out the computer would be
just dead. Nothing. no noise nothing. I agree that
you should double check your connections. Is the
clicking noise comming from the power supply. The
only thing that could click in my mind is the HDD
when the pin is striking the side of the HDD
well it seems dead. but when you either unplug it or plug it in i hear a click that is definantly coming from the power supply. I have rechecked all connections.

Iphone 3gs battery-my story-please help

hi all
i expierenced issues with my iphone 3gs since iOS 4.1,my battery drain was terrible but after iOS 4.2 i thought it becomes better but no,after 2 weeks i observed what my battery is draining sometimes very fast-for example when i charge it yesterday from 0% to 100%,after one call my battery in my eyes decrease from 100% to 97% and this is not for first time.and when my battery goes from (for example 97 to 88%) it stays on 88 % all the day,please i want to use my phone normally,tell me what to do,i tried many times in iOS 4.1 restoring in iTunes but nothing helped,maybe to try to restore in iOS 4.2 ? any sugesstions will be apreciated,thank you !

Hi,
You may have to Restore as New...
See this link,
http://discussions.apple.com/thread.jspa?threadID=2687888&tstart=15
Cheers

Iphone 4s and iPhoto problem - please help me!!

Hi there
I have searched the discussion boards for an answer to my problem, but cant find one yet.
I have a brand new imac with Mavericks installed and up to date. My iphoto is the latest one according to the app store and I have ios7.0.3 on my iphone 4s.
I have about 300 photos on the iphone and i connected to the imac with a usb cable and it appeared as though all the photos were imported in the usual way, so i agreed to delete them off the iphone when prompted to do so.
However, the events for the appropriate dates have been created, but they are grey and all claim to have 0 photos in them.
When I look at last import, it says that the last import was the import I did a few days ago and appears to ignore the one I have just done.
Please can anyon help me find where my photos are in a simple way. I am getting very cross and frustrated. I have used macs for 7 years with no problems until this.
I would also add that my iphoto is very slow and regularly stops responding so that I have to force quit.
Help appreciated!
Thanks a lot
Nick

Thanks to LarryHN and Old Toad, my problems are nearly over, I hope.
I did the repair and, thankfully, my missing photos are back.
However, I now have about 100 photos which are on my iPhone 4s camera roll and when I plug the phone in, it says that it has already imported them, but I can't find them in iPhoto!
I can see the pictures on the mac when the phone is plugged in and I look on the iphone, but I cant see where they are.
Do you think that having photostream has complicated matters at all?
Also, why does the photo stream on my phone (and ipad) show more photos than the photostream folder fir Nov 2013 in iphoto? Is there a delay in appearing in iphoto?
Finally, about 3 out of 5 times, iphoto becomes really slow and stops responding, requiring a force quit. Any ideas why this is and how to fix it?
THis is a great forum, thanks to everyone for help so far.
Nick

X201 Wireless switch Hardware problem - PLEASE HELP

Hello everyone,
I have been a regular reader of this wonderful forum and have also participated on a few questions. I have an x201 which I bought from UK 6months back.
After a smooth sail for many months and just when I thought life was going good, I have a wireless switch problem that pops up out of nowhere. I never use hardware switch and had to do it only last week because of checking for my internet connection problems.
Only once in my entire experience with this laptop that I put it off, now it has become so sensitive that even shaking the laptop while typing turns off the laptop. On reading about this problem I found out that it is quite a common problem with x-series and has many users affected from it. After confidently calling the customer support they ask me to pay 200euros just to "TAKE A LOOK AT THE PROBLEM"????. Apart from at least acknowledging the persistent problem across all the models they end up asking me to pay for everything and cannot tell me how much it will cost me or even tell me how long it will take to replace this.
Is there any other way to do this? The support told me that the only other way to repair this will be to buy the Base switch myself and then replace it. I am a biologist doing my PhD and have no knowledge of all these. Apart from all the appluad this laptop got from my colleagues, now they all think this is a joke by Lenovo to be charging for something that is entirely their mistake.
Can anyone point to a solution please and help me. I was really looking to buying an ultrabook next year but looks like replacing a switch is going to cost me 1/4th of what one would be for an entire laptop.
PLEASE HELP

Hi chaihg,
I understand that the issue has not been resolved.
I would like to see if I can help and I've PMed you for some details. Do let me know.
thanks!
lak_sg
WW Social Media
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My iphone 5s battery drains fast, please help

I bought my iphone from Dubai few week's back,but i'm living in Srilanka. And i noticed that the battery is draining soo fast.so how can i get out from this situation.plese help

Hello, dilith
Thank you for visiting Apple Support Communities.
Troubleshooting battery life can be tricky as usage, environmental and other factors play a role in how long the battery will last throughout a day. Here is a basic guide for settings that you can adjust to possibly prolong your battery life.
Optimize Your Settings
Depending on how they are set, a few features may decrease your iPhone battery life. The tips below apply to an iPhone running iOS 7.0 or later.
Enable Wi-Fi: Having Wi-Fi enabled helps consume less power when doing activities that access data. Go to Settings > Wi-Fi and log in to a Wi-Fi network.
Adjust brightness: Dim the screen or turn on Auto-Brightness to extend battery life. Turning on Auto-Brightness allows the screen to adjust based on lighting conditions. To enable Auto-Brightness go to Settings > Brightness & Wallpaper and set Auto-Brightness to On. Adjust your brightness when indoors in a non-bright environment. You can do this by going to Settings > Brightness & Wallpaper and dragging the slider to the left to dim. After making this change, turn Auto-Brightness off and then on again to reset to the default behavior.
Fetch new data less frequently: The more frequently email or other data is fetched, the quicker your battery may drain. To fetch data manually: Go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually. To increase the fetch interval, go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Hourly. Note: This global setting applies to all applications that do not support push services. If you receive a lot of email, you can turn off push email to save your battery. Go to Settings > Mail, Contacts, Calendars > Fetch New Data. Set Push to Off. Messages sent to your push email accounts will now be received on your phone based on the global Fetch setting rather than as they arrive.
Turn off push notifications: Apps with Push Notification alert you of new data, which may impact battery life. To disable, go to Settings > Notifications, choose the app you want to disable, and do the following:
Change Alert Style to None.
Turn Badge App Icon off.
Turn Sounds off.
Note: New data will be received when you open the app.
Minimize use of location services: Apps that actively use location services, such as Maps, may reduce battery life. You can see which applications have recently used location services by going to Settings > Privacy > Location Services. Apps that have recently used your location will have an indicator next to the app’s on/off switch. If you see an app that you do not expect to be using location services, you can disable it by toggling the switch to Off. To disable location services completely, go to Settings > Privacy > Location Services.
Use Airplane Mode in low- or no-coverage areas: Your iPhone always tries to maintain a connection with the cellular network, which may use more power in low- or no-coverage areas. Turn on Airplane Mode to increase battery life in these situations. Go to Settings and set Airplane Mode to On. Note that you will be unable to make or receive calls with Airplane Mode on.
Viewing Usage Statistics
Knowing and understanding your iPhone usage can help you better manage your battery life. To view your iPhone usage statistics, go to Settings > General > Usage. Under “Time since last full charge”:
Usage: Amount of time iPhone has been awake and in use since the last full charge. iPhone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
Standby: Amount of time iPhone has been powered on since its last full charge, including the time the phone has been asleep.
Lock Your iPhone
You will still receive calls and text messages when your iPhone is locked, but nothing happens if you touch the screen. To lock iPhone, press the Sleep/Wake button. You can also set the Auto-Lock interval so your iPhone will lock after a period of inactivity. Go to Settings > General > Auto-Lock and set the interval to a shorter time, such as 1 Minute.
Extend Battery Life if Storing Your iPhone
If you will not be using your iPhone for a while, charge the battery up to 50 percent before storing it.
iPhone Batteries
Also, here is a resource that will walk you through some troubleshooting steps.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Jason H.

Toshiba P305 major hardware problems PLease help

I have a satellite p305. The headphone jack stopped working and the touchpad and click buttons stopped working. I tried updating drivers but nothing changed. The other problem was whenever you had to programs open that produce sound (windows media player and a you tube video or similar) The audio came out staticky. This is not when trying to listen to both players at the same time, one is paused. But if you have both of them open one will be staticky. I tore the computer down to see if there was anything visually wrong with it at the headphone jack or where the click butons and touch pad plug in but found nothing. I put the motherboard back in and put it all back together and plugged it in and pressed the power button. The buttons light up and i think either the hard drive or fan spun but nothing else happened after that. Im thinking bad MOBO but i need some advise because this is a computer that i am working on for someone else and really dont want the whole you broke my computer game to be played.

This is one problem within the DirectX 9.0b:
Please take a good look at this update for Microsoft DirectX v9.0b:
http://www.microsoft.com/downloads/details.aspx?FamilyID=8dfd1b6d-e177-4a0e-91d0-b4310675b02b&DisplayLang=en
Possible Issue Description:
- TV-Tuner card cannot keep TV-Tuner settings in memory;
- TV-Tuner card cannot be initialized in system after installing DirectX v9.0b;
- TV-Tuner card cannot capture any picture;
Official Microsoft Information:
DirectX 9.0b was released on 7/23/03 to address the MIDI security issue identified in bulletin MS03-030. A small number of non-security fixes were also included in the release. One of these fixes caused several TV Tuner capture card/driver combinations using video formats other than NTSC (NTSC-J, PAL, SECAM) to no longer initialize correctly on Windows 2000, Windows XP, and Windows Server 2003. Symptoms include loss of capture functionality and potential inability to set/retain device capture settings. This hotfix, documented further in Knowledge Base article 825116, has been issued to correct the flaw.
I believe that your SB card is sharing IRQs with your Firewire hardwares thus causing errors.

Battery 'X' problem, please help!

Hey, all. Just recently(like for the past week), my battery's percentage disappeared and now there is an 'X' there. I''ve done a search, and tried some of the suggestions, like making sure the battery is seated properly. Doesn't seem to work for me. My power supply shows green, but when I disconnect it, my machine powers down. Now, I haven't felt the machine overheating or anything out of the ordinary, just this. I don't think I have one of the recalled batteries, this one's genuine Apple. Can anyone give me some ideas? I've read about resetting the SMC(I think that's what it was), but i've also read that that will reset my harddrive, and I don't want to do that. Any suggestions or ideas are greatly appreciated.

Read the Apple Support documents regarding MacBook and MacBookPro batteries and the Update.
http://www.apple.com/support/macbookpro/
http://www.apple.com/support/macbook_macbookpro/batteryupdate/
Read the complete article but here is an excerpt:
This battery update should be run on all MacBook and MacBook Pro computers and extra batteries that were purchased between February 2006 and April 2007.
If, after you have installed the battery update, your battery has any of the symptoms listed below, please make a reservation to bring your computer with its battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. If Apple or an AASP determines that your battery is eligible for replacement, you will receive a new battery, free of charge, even if your MacBook or MacBook Pro is out of warranty.
For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Your problems are those of the type that are specifically mentioned.
Read it.
Do the update and then follow the directions for replacement if it does not solve the problem.
you have less to lose by following the Apple directions than by avoiding them.

Hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

My iphone 5 32 gb has an camera autofocus problem, please help me solve this

my iphone 5 32 gb has an camera autofocus problem, please help me solve this

Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

My iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* to the point where i just want to smash it how do i solve this problem please help?

my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?

Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you...

TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Iphone 4 Battery, Hardware problems? Please Help.

Similar Messages

Maybe you are looking for