Iphone 4 - big problem during calls -   caller cannot hear me

Dear All,
I have a very big problem with my brand new Iphone 4. I bought it in UK and I'm using it in Poland with Orange sim card. Randomly, during calls (signal strength is not an issue in this case) my caller cannot hear me at all. I still can hear any single word but they think that call is finished (dropped). I did the restore but problem remained. Is there anybody with the same problem?

Saint1974 wrote:
Dear All,
I have a very big problem with my brand new Iphone 4. I bought it in UK and I'm using it in Poland with Orange sim card. Randomly, during calls (signal strength is not an issue in this case) my caller cannot hear me at all. I still can hear any single word but they think that call is finished (dropped). I did the restore but problem remained. Is there anybody with the same problem?
Hi Saint,
It is possible that the creen is activating during the call and your ear is touching the mute button. There appears to be a problem with the iP4's proximity sensor not always actuating when the screen is close to the ear - this can result is so-called 'face dialling'. There is an enormous thread dealing with this exact problem elsewhere on these forums:
http://discussions.apple.com/thread.jspa?threadID=2475509&tstart=15
Fwiw, I also suffer this problem.
Having said all that, maybe you problem is something else. Hope it helps.
Regards,
Richard.

Similar Messages

  • Called party cannot hear when iPhone 4 in speaker mode.  cleaned earbud socket but think have sw problem. How do I reload os.

    Called party cannot hear when iphone 4 in speaker mode.  Have cleaned earbud contact but think this is sw problem and would like to reload os 5.1.1.  Not sure how to do this as all attempts result in "software is up to date" message.

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • When i call, i cannot hear them and they cannot hear me

    when i call,  i cannot hear them and they cannot hear me

    I'm having the same problem in the last 2 days, Can that fixed?

  • When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. What is the solution?

    When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. Due to this I cannot even use Siri, Voice message recorder or even Tom Cat applications. What is the solution?

    http://support.apple.com/kb/TS1630

  • When I make a call I cannot hear anyone talking. But they can hear me?

    When I make a call I cannot hear anyone talking. But they can hear me?

    Hey there mahmoud.qaadan,
    It sounds like you are making calls or receiving them but the other party cannot hear you even though the microphones work in other apps on your phone. I would start by quitting all the running apps on your device:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that and restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If it persists, I would next backup your device to iTunes with this article:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    And restore it from your backup with this article:
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • HT4515 Just tried to place a call on my new iPhone5S.     I can hear the person I'm calling, they cannot hear me.    The microphone icon has a line through it, but tapping the icon does not make a difference.

    Just tried to place a call with my new iPhone.  I can hear the person I'm calling but they cannot hear me.     There is a line across the microphone icon, which I took to mean muted but nothing changes when I tap it.    What am I doing - or not doing?

    is your mute switch turned on (above the volume) ?  remove case and screen protecter.
    is volume turned up?
    if so do this
    account security
    Please call apple @ 1-800-692-7753 in USA
    ask for the account security team
    you may want to add a credit card to your iTunes account  before calling; so they will have a way to verify your identity.
    Peace, Clyde
    check # for your country
    http://support.apple.com/kb/HE57
    <Edited by Host>

  • Phone call recipients cannot hear me

    iPhone 4s-new.  When phone calls are made I can hear the person answer but they cannot hear me.  Also when they call me they hear the phone ringing and when I answer they cannot hear me.  Checked volume and mute and all is ok, volume is up and mute is off.

    same here with me besides Im no longer in US. Im back home to İstanbul and here is no apple store where I can ask for a new phone. Such a shame for Iphone

  • The caller / Called Person cannot hear me properly

    Hello All....
    I just got an unlocked BB 8110 from the US (T-Mobile) as a gift and have BB services from my service provider Vodafone (India). However I seem to have run into a problem which I believe is an issue with most 8110.
    The caller cannot hear me properly and Vice-Versa. I have to speak out load for the other person to hear me and that too feebly. Is there a fix around that can be done on the phone itself. I make sure that my fingers are not blocking the microphone. Help me please as this is becoming very frustrating for me and the caller.
    Regards
    Rajat

    Try this - when device is ON, remove the battery, wait a minute and turn the battery back to the device.
    If this does not help - try the step #2
    Make selective backup as it is explained here:
    http://supportforums.blackberry.com/rim/board/message?board.id=8100&view=by_date_ascending&message.i...
    After that do the wipe of the device memory. On the device go to Options - Security Options - General Settings
    Open menu and select "Wipe handheld"
    Check the device and restore data from backup.
    If it also does not help - then most probably there is a defect in your device.
    Take it to a repair shop for diagnostics.

  • Out going and incomming calls callers cannot hear me but i can hear them

    if some one calls me i can hear them   and when i make out going calls i can hear the person but they cannot hear me

    http://support.apple.com/kb/TS2802

  • 5610 PROBLEM DURING ACTIVE CALL

    PROBLEM # 1: WHEN IAM TALKING TO SOMEONE FOR MORE THAM 30 MINS, MY PHONE DISPLAY BECOME WHITE AND THEN COME TO NORMAL WITH FEW SECONDS.AND THE CALL IS ALSO DISCONNECTED.
    PROBLEM # 2: I WANT THE IN-CALL TIMER TO BE SHOWN DURING A CALL. BUT I CANT FIND IT ANYWHERE IN THE PHONE.
    PLZ SOMEONE HELP.
    RIZZI
    PAKISTAN.

    I CANT EVEN INSTALL THEME FROM PC TO PHONE.THE APPLICATION INSTALLER DO NOT SHOW THE .nth FILES. WHAT SHOULD I DO?

  • HT4623 iPhone keeps disconnecting during a call

    My iPhone keeps disconnecting during a phone call

    Basics from the manual are restart, reset, restore
    Follow the 3R's- if a restart does not solve your problem proceed
    User troubleshooting is:
    1.restart, ie power off/on,
    2. reset  http://support.apple.com/kb/HT1430,
    3. restore from backup, restore as new device. http://support.apple.com/kb/HT1414
    If your problem continues contact your carrier.

  • TS3367 During FaceTime I cannot hear them, how do I fix????

    I cannot hear person I am FaceTime with. How do I fix??

    when using the regular phone to make calls, can your contacts hear you?
    do you have anything covering the top mic?  i believe that is what is used when using speakerphone and/or facetime, but i am not sure...

  • URGENT BIG PROBLEM:during import track st. in queue simply does not disap

    I have problem when importing transport request on production(the transport domain controler is on development system) . The track status in queue simply does not disappear.
    I tried(based on what I have seen on an other thread) to delete the transport in import monitor and tp on OS level on productive and development system
    Then I deleted entries in TRBAT&TRJOB tables. The TPSTAT is empty.
    The problem persists.
    What would you suggest . The go live depends on this problem

    Hi,
    /usr/sap/trans/buffer might still contain entries, be careful do not modify anything here.
    Check the link
    http://help.sap.com/saphelp_47x200/helpdata/en/3d/ad5b5a4ebc11d182bf0000e829fbfe/frameset.htm
    Check the 'Cleaning up the transport directory' and 'Synchronizing the Buffers' links within the above link.
    Please do not use subjects like : URGENT BIG PROBLEM.. it is against the rules of this forum.
    Regards,
    Siddhesh

  • My new iPhone 4S has hearing problem.speaker and headphone works very good.However using handset to make and receive calls I cannot hear anything?I did restore the phone and removed the plastic.Is there any solution to this problem please?

    I am having heraing problem with iPhone 4S.Speaker and headphone works well.No echo.When I use handset to receive or make calls,I can't hear anything?I restore the phone and removed the plastic as well.Is there anyway to fix this problem?

    I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
    Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
    Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
    But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
    Have you tried a bluetooth headset yet?

  • I have the iPhone 4. Whoever I call, people cannot hear me.

    It seems to me that there is any hardware problem because when I make a call, no one can hear me...

    Are you using a protective case on your phone? If it's not made for your exact model of iPhone it can cover the microphone.

Maybe you are looking for

  • My iMac no longer will recognize devices thru itunes on either wifi sync or usb cable

    My imac no longer will recognize devices when I open itunes. I have tried every version of restarting computer, ipad etc. all versions are up to date. I cannot transfer events from iphoto to my ipad. drives me nuts. I used to do this just time. I hav

  • Portege R600 - How do I install XP on a new HDD?

    I did the mechanical install of a new hard drive, and know it's correct. Now, I want to install XP - not Vista. However, nothing I have tried will enable the BIOS to recognize that new drive. Toshiba XP "alternative media" disk should include the SAT

  • How do I add an e-mail hyperlink? (v3.2)

    I have watched an Adobe video showing how to create hyperlinks. http://tv.adobe.com/watch/learn-adobe-muse-cc/creating-a-hyperlink-in-muse/ The video is easy to understand. I create the text and highlight it, however, I can not get the Hyperlink box

  • Variable binding with javafx.ext.swing.SwingSlider

    My first javafx program consists of a slider and a text box, the text box displays the current value of the slider. The problem is the text box does not display anything when the program just starts up, but only gets populated once I change the value

  • Deer Park, WI  and 4 corners area - dropped calls, no service as of 2 weeks ago

    Had 3 or 4G connection in my home and within a couple of miles radius until two weeks ago. Now I can't get a call to connect, and incoming calls constantly get dropped. Where do I call to report this change in service?  I'm new to Verizon as of 2 mon