IPhone 4 bluetooth audiostreaming suddenly stops working - KIA Optima
I recently purchased a 2012 KIA Optima with bluetooth capability and immediately after pairing I could use the phone and play music from my iPod. However, within the last week, the audio streaming from both my iPhone and iPad stopped working. My guess is that something changed after a recent update. Any help or news?
I am having the same issue with my Kia Sorento. I upgraded to iOS 6 on my iPhone 4. Bluetooth streaming was working before the iOS 6 upgrade and afterwards. But then last week it stopped streaming. I double checked the settings on the phone and in the Kia Uvo settings. I deleted it in the uvo system and paired it again. Restarted the phone. It still didn't want to stream music over bluetooth.
The other change is that I also got an Apple TV last week, and it was after that it stopped streaming over Bluetooth. On the Kia forum someone that was having this problem had also connected their iPhone to an Apple TV, and they had the same problem.
Any thoughts if there might be something that might cause conflicts with Bluetooth streaming after connecting to Apple TV?
Similar Messages
-
The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes. Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
Dim oOutlook As Outlook.Application
Set oOutlook = New Outlook.Application
Set objNameSpace = oOutlook.GetNamespace("MAPI")
Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
For i = objFolders.Count To 1 Step -1
If Left(objFolders(i).Name, 7) = "_ModGrp" Then
objFolders.Remove( i )
Else
If Not objFolders(i).Folders Is Nothing Then
Call CleanFolders(objFolders(i).Folders)
End If
End If
Next i
End Sub -
I was using my Iphone 4 and it suddenly stopped working.
I was using my Iphone 4 and it suddenly stopped working.
I thought the battery had just worn out really quickly or i'd not charged it last night.
My phone is presently plugged in and not even a battery charge appears.
I've had my phone for 16 months so I think its out of warranty, Im gutted as all of my recent photos havent been backed up!! Not sure what to do, can anyone suggest a possible solution please?See this Discussion...
https://discussions.apple.com/message/19521062?ac_cid=sa123456#19521062 -
Why would my bluetooth suddenly stop working?
I have had non-Apple Bluetooth devices simply stop communicating after being paired with a device for a year or longer with no apparent reason. The solution was simply to pair the device again.
An explanation is likely to be elusive, resulting only in manufacturers of the devices blaming each other for deficiencies either real or imagined. -
i need help with my phone,
i downloaded yahoo messenger for my iphone 4... i used the app for about 10 mins then it crashed and will not turn on.. the screen is lit, but is black, ive tried plugging it into my computer but nothing is happening, ive holding down the home button and all that, and still nothing.
someone please help me outi put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.
-
My iphone suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can open the iphone itself. please help me.
My iphone 5 suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can't open the iphone itself. please help me.
-
IPhone 3GS suddenly stopped working with wifi in only one location
This is the situation. I have an iPhone 3GS and it the wifi suddenly stopped working at my house (just with the iPhone).
I have an Airport express (latest generation) and a time capsule (1st generation). All of my devices (except a PC laptop which isn't much of an issue, and the iPhone) cannot connect to it. The devices I have are as follows: Apple TV, iPod Touch, iPad 2, the "new" iPad, a macintosh computer.
However, when I move the Airport express to my work location, and plug it into the ethernet there, the iPhone works totally fine. It seems like the issue is just at my house. The Time Capsule works intermittently sometimes; random devices cannot connect to the network sometimes. The airport express seemed to fix this problem. I have read that this problem is related to the operating system "Lion" but the network was working fine for months and months after I have upgraded to lion. Sometimes both devices cease to work, and there is no internet to any devices in my home.
The network is password protected, so that removes the possibility of neighbors connecting to the network. The name of the network contains spaces and "symbols" which I have heard is an issue for PC's trying to connect to networks. Both my home and my workplace are on the same internet provider.
My questions are:
Why does the airport express work with the iPhone at my workplace and not at my house?
How many devices can a 1st gen Time Capsule handle at once?
If I buy an airport extreme, will it fix this issue?
How can I fix this?
I have restarted the device several times (both the iPhone and Time Capsule) and it still didn't fix anything.Using the delete all content and settings option is not restoring the iPhone. Using the delete all content and settings option does exactly that - all content and settings are securely deleted except for the firmware, which is not a restore.
If you do this followed by re-installing an app via the iTunes sync process, the app settings and any data created and stored by the app will be lost. 3rd party app settings and data created and stored by a 3rd party app is not stored with the app on your iPhone and is not stored with the app or synced with the app in your iTunes library on your computer.
3rd party app settings and data created and stored by a 3rd party app is stored separately from the app on your iPhone and is included with your iPhone's backup which is updated as the first step during the iTunes sync process.
Restoring an iPhone with iTunes completely erases the iPhone first followed by the firmware being re-installed. After the firmware is re-installed, you are prompted to restore your iPhone from your iPhone's backup, which is the default selection. The other selection available is as a new iPhone. After either one, this must be followed by a sync with iTunes. If you restore from your iPhone's backup followed by re-installing an app that stores data you need to access, the data will be restored with the app. If you restore as a new iPhone or not from your iPhone's backup followed by re-installng an app, the app settings and any data created and stored by the app will not be restored with the app since you didn't restore your iPhone from your iPhone's backup where this data is stored.
If you restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup with no change, you can follow this by restoring your iPhone with iTunes from your iPhone's backup to recover the 3rd party app settings and the data created and stored by the app along with all other data included with your iPhone's backup. -
Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine? Is this because of some recent software update by Apple? 8x8 support acknowledges issues with no current work-arounds? The 8x8 desktop app worked until early December, then quit. I've deleted and re-downloaded the app, but no difference.
The solution is :
1. Delete iPhone configuration utility. Just drop it to the trash
2. Run
sudo rm -rf /private/var/db/receipts/com.apple.pkg.iPhoneConfigurationUtility.*
rm -rf ~/Library/Preferences/com.apple.iPhoneConfigurationUtility.plist*
3. Delete the whole folder: /System/Library/Extensions/AppleUSBEthernetHost.kext
4. Reinstall iTunes (just over the previous one)
5. Restart
incase of any issues, visit this thread: https://discussions.apple.com/thread/3725328?start=15&tstart=0 -
My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?
Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
Yahoo mail suddenly stop working on iphone 4s
My yahoo mail suddenly stop working on my Iphone 4s, and it is not working with Icloud either. The inbox is completley empty. Please help
when you contacted Yahoo, what did they say?
-
my iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
Accessing Gmail suddenly stopped working on both my Powerbook pro running latest OS and Mail versions and on my iPhone. I can access via the web. I get the error that my password or username is incorrect. I reset my password in Gmail and confirmed it works on gmail, I then changed it on my Iphone and Mac Mail. It still does not work. I deleted the gamil account on mail on my mac and reinstalled it and it still will not work
I too started having my password rejected in MAIL.app for imap.mail.me.com for my icloud email address. Can login to icloud with web browser fine. This has been happening off and on for several days.....if I wait 2-3 hours it will suddenly start working again, but then problem re-asserts itself ;-)
-
My Kindle app suddenly stopped working on my iPhone 4s. All my software is up to date and I have restarted the phone, uninstalled and reinstalled the app and it still opens and shuts down instantly. Any ideas?
We need clarification here.
Please don't just state version numbers, also state which software. iTunes 10.7 requires OSX 10.6.8 or higher. Leopard is OSX 10.5.8. You have two alternatives right now. One is to stay with Leopard for a while (ultimately you should upgrade) and install iTunes 10.6.3 which is the last version to work with Leopard. This should work with iOS6 on an iPhone4. The other is to call Apple and order OSX 10.6 (Snow Leopard) and upgrade the computer to 10.6.8 which will allow you to run iTunes 10.7. The caveat is we know nothing about which computer you run and if it even can run any system higher than Leopard.
Here is iTunes 10.6.3
iTunes 10.6.3 - http://support.apple.com/kb/DL1575
If you want to try upgrading:
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About this Mac" and "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present). If it says something about Intel or Core Duo or Core 2 Duo in the processor you can upgrade to Snow Leopard (assuming you have sufficient RAM/"memory"). If it says PPC or PowerMac, you cannot.
Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion - https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store.
It would help when posting issues here if you would state exact error messages you see. "It's still not working!" while a description of the situation does not speed us to a diagnosis of the underlying issue. -
My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.
Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.
-
My bluetooth suddenly stopped working soon after I upgraded to OS 10.9.4. I rebooted SMC, didn't work. Any other ideas? Don't know if it's related to the upgrade. I see other complaints about bluetooth in the thread but none of the solutions offered there have worked for me.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.
Maybe you are looking for
-
Re: How to connect camcorder to my Satellite L300-1AD?
Hi everyone I hope someone out there can help me - my problem is driving me mad!! I have a Satellite L300 1AD(?) laptop and I am trying to connect my camcorder to it so that I can watch and edit my holiday videos. Apparently I can't use a USB cable a
-
Unable to cycle error log due to lock that will not clear
Hello, Currently I'm having an issue with cycling the error log on two SQL Server Instances because the file is being used by another process. Simple I know but, when you try to kill the SPID it becomes hung and we are forced to restart the instance,
-
Why is my rectangle tool creating skewed rectangles in Adobe Illustrator CC?
Why is my rectangle tool creating skewed rectangles in Adobe Illustrator CC?
-
Does anyone know why I am not able to update from 5.0.4 to 5.1. Everytime i download the update from 5.1.1 it always says This updater is only able to update an existing Final Cut Pro 5.1 application. Please make sure the application is located in th
-
Upgrading OS X 10.3.9 to Leopard
I would like to install Leopard. After some research, I've purchase Leopard 10.5.1 and this is my laptops' details. Processor 1.2 GHz power G4 Memory 768MB DDR SDRAM Machine Model: iBook G4 CPU Type: PowerPC G4 (1.1) Number Of CPUs: 1 CPU Speed: 1.2