IPhone 4 Bluetooth will not pair with Jawbone Icon,  Jawbone 2

Just got my iPhone today and am more or less thrilled to have it. The only problem (other than the antenna issue, which the bumper fixes beautifully) is that Bluetooth will not pair with any of my Bluetooth devices. When I turn on Bluetooth on the phone and turn on the headset, iPhone says it's "searching.." and "now discoverable" but it never discovers anything, let alone pair up. The Bluetooth on my MacBook recognized the iPhone and I was able to pair them, but no luck on the Jawbones. Sounds like a JB problem, but I'm wondering if anyone has had this problem and if there's a fix via the iPhone.

On the icon, turn it off and hold button down while sliding the power switch on. This should put it in pairing mode. Then go into your i4's bluetooth menu and give it another go. Also, Jawbone has recently updated the firmware for the Icon so you need to load it as well. I have the icon and a Jabra cruiser and both work/paired fine. You may want to try rebooting phone and retrying as well.

Similar Messages

  • IPhone 4S Bluetooth will not pair with Citroen c4 grand Picasso

    My new Citroen c4 Picasso can't detect an iPhone 4S or an iPhone 3 via Bluetooth.  A Nokia mobile phone can be detected, so it seems the car's system is ok, so must be an apple/iPhone problem.  Can anyone help, please? Thank you!

    Hi there Nicola156,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    -Griff W. 

  • Bluetooth will not pair with Moto Droid4

    My Droid4 has will not pair with either my "Verzion" Jabra VBT-4050 nor my Jawbone Icon.  Both these earpieces paired with this phone before, but will not now.
    Makes no sense to me.
    Thanks...Andy

        westa510b,
    That can certainly be confusing since it previously paired just fine with your device. We will be happy to take a closer look at this matter with you. Have you attempted to reboot the device? Tried deleting the bluetooth connection from the device, then re-establishing connection? Any changes recently to the devices software or additions of an application when you first noticed this issue began?
    EfrainM_VZW
    Follow us on twitter @VZWSupport

  • My iPhone 4S Bluetooth will not connect with either my iPad1, MacBook Pro or Automobile BT.  Suspect a stack issue in new BT 4.0 (BTLE) release. Has any one discovered fix to this. I have tried this with two separate 4S phones and have same problem..

    One further clarification. I am most concerned with connecting with BT in automobile. I can use WiFi to tether to my other devices.  I cannot change the car very easily! My iPhone 3G had no connection issues.

    I'm new.  Same bluetooth problem. Will not pair with my 2010 VW GTI w NAV system, or my MacBook Pro 17" (just discovered the MacB prob.)
    When I initially discovered the problem I went to an Apple Store. Genius was excellent but requested that I check with VW.  VW people were very helpful. A mechanic had an iphone 4s. He came out to the car ... He could not pair my phone but he could pair his phone ... So, it's the iphone ... Back to the Apple Store ... the genius was really good. He replaced the iphone. Great !  So, back out to the car & it would not pair, still.  So ... can't be the phone , right.  Back to VW. The Audi manager had an iphone 4S. He paired his phone with my car. He could not pair my phone to my car. He tries my phone in a new 2011 GTI sitting on the lot ... my phone pairs with it just fine.  So ... it's my car.  So ... make an appointment to get the bluetooth module replaced. They replace the Bluetooth module. My iphone will not pair.  They end up pairing 2 different iphone 4S to my car ... but not my iphone 4S. My iphone 4S will also not pair with another 2010 GTI they have in for service. Though the 2 iphone 4S
    pair with the second GTI just fine.  They even try pairing my iphone with a brand new 2012 GTI in the showroom ... yep ... it paired fine.    So ... ????????????????
    They are going to update my nav software next (tomorrow), Hopeful ??? not really ... Will be taking my computer to Apple Store next ... maybe if they can discover why it will not pair to my MacBook Pro it will lead to a solution for the GTI ???  I'll get back to you.

  • My iPhone 6 plus will not pair with my macbook air 2014

    My iPhone 6 plus gives a message unsuccessful not supported when I try and pair with my macbook air.
    both are running up to date iOS and OS X.

    An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
    If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

  • After installing ios7 on my iphone 4, bluetooth is not pairing with my bluetooth car speaker.  I have restored settings.  Any tips?

    Can anyone help/  After installing ios7 on the iphone 4, I cannot connect bluetooth on the phone with my bluetooth car speaker.  It worked before ios7.  I have restored my phone but it is still not working.

    Settings>General>Reset>Reset all settings. This will not affect data. Remove the car speakers from the phone under Bluetooth, and remove the phone from the car stereo. After that place both devices back into pairing mode and reconnect.

  • Bluetooth will not pair with macbook?

    My new i phone 4 will not pick up any bluetooth pairing options including my macbook.

    Lochgilphead wrote:
    My new i phone 4 will not pick up any bluetooth pairing options including my macbook.
    This has never been a feature of iphone.

  • My macbook pro bluetooth will not pair with my samsung 4s

    Went from a machook to a macbook pro running yosemite. Samsun 4s paired with macbook, but not macbook pro. Anybody have this problem and can help?
    8 GB 1067 MHz DDR3 2.4 GHz Intel Core 2 Duo

    Hi there d'andreTeeter,
    If you still aren't able to connect to your Samsung S4 via bluetooth with your Mac. To help you get the issue resolved, or isolated I recommend the information in the following article:
    Bluetooth Quick Assist
    Start with these steps, and there are more within if you need them:
    Check your device's system requirements
    Make sure that your computer meets your Bluetooth device's system requirements—visit the device manufacturer's website for details. This also applies to a USB Bluetooth adapter, if you use one.
    Make sure that Bluetooth and your device are turned on
    To check your computer's Bluetooth status, choose System Preferences from the Apple menu, then click Bluetooth. In Bluetooth preferences, make sure "On" is selected (in earlier Mac OS X versions, click the Settings tab, then click the Bluetooth On button to turn on Bluetooth). Check your device to make sure that it's also powered on. If you're trying to pair a Bluetooth phone or PDA, make sure that Bluetooth is active and that the device is “discoverable” (consult your product manual if you're unsure about how to change these settings on your device).
    Download and install the latest software for the device
    Some Bluetooth devices require you to install software before you can use them with your Mac. Make sure that you've installed any required software or that you're using the latest software available for the device on your computer. Check the device manufacturer's website for the latest updates and more information. For help with syncing a Palm OS device with your Mac over Bluetooth, see iSync 2: How to sync a Palm OS device over Bluetooth.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • IPhone 5S, bluetooth will not pair up with my Oticon Streamer 1.4 device

    My Oticon Streamer is a bluetooth connection device to my hearing aids.  I know it's working because my desk phone rings thru the Oticon to my hearing aids.  Works fine.
    I've been trying to pair up the iPhone 5S and the Oticon.  Briefly, the phone recognizes the Oticon, ask for the password (which is 0000), get a message to make sure the Oticon is turned on (it is), and cannot pair.  Any ideas?

    This support document provides the Bluetooth profiles that the iPhone supports. It does not support all hearing aids, and you may need to check with the manufacturer to see if the iPhone profile matches the profile they use to connect with. http://support.apple.com/kb/HT3647

  • IPhone 4s Bluetooth will not connect with my 2009 Mercedes S550

    My 2009 Mercedes S550 will recognize my iPhone 4s via Bluetooth and then will connect but then I get a message on my phone that it is incompatible and then the car and phone don't recognize the other. Car says 'phone is off' when it is not. Any ideas on what to do?  It has worked for 2 years with a 3GS iPhone and the other operating systems.

    I took my phone to the dealership and they were able to get it to pair.  They did all the pairing from the phone side.  They activated the bluetooth receiver on the car and then went into the bluetooth settings on the phone to pair it.  It works fine now.  Regarding the ringtone...my wife had a similar problem and it was the ringtone she had selected on her phone that was causing the problem.  You might try changing your ringtone to see if you still have the same problem.

  • Bluetooth will not pair with other mobile

    Bluetooth

    Cheonweb - thanks.
    to Karl9, you made me waste my time answering your post, when it was already answered by Cheonweb.
    Please read the forum rules before posting.

  • My blue tooth will not pair with windows 8.1

    hp envy m6 notebook pc  having problems with my bluetooth will not pair with speaker after up graded to 8.1 ,and my simplepass dosent work eather.

    Hello, jpalazzi
    Welcome to the HP Forums.
    I see that after upgrading to 8.1, your having a few issues with the notebook. I will try to assist you with this.
    If you haven't you may need to update the drivers.
    You can also try these documents:
    Using HP SimplePass Fingerprint Reader (Windows 8)
    Using Bluetooth Devices (Windows 8)
    If you require further assistance, please provide the model and product numbers for your notebook.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • HT2188 my iPhone will not pair with my bluetooth even though it finds it available? any ideas?

    My iPhone will not pair with any of my bluetooth devices even though it recognizes them.  any ideas?

    iPhone supports a limited Bluetooth profile
    Check this list and your other Bluetooth devices
    iOS: Supported Bluetooth profiles

  • My iPhone will not pair with Yada Bluetooth speakerphone

    My iPhone 5 (iOS 8.1.1) will not pair with a Yada Bluetooth car speakerphone. (Android phone has no problem.) Is there a fix?
    Thanks

    Hello grassyknap,
    For most issues with pairing your iPhone with a Bluetooth device like your car, then take a look at the article below to sort you out. Make sure to reset network settings to clear it out from your frequent pairings to reestablish the connection. 
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/en-us/TS4562
    Regards,
    -Norm G. 

  • IPhone 4s will not pair with car bluetooth

    My new iphone 4s will not pair with the bluetooth in my 07 Volvo XC70. The blue tooth is after market, looks similar to internet photos of Motorolla T605. Blue tooth says to put in scan mode and then enter code when prompted. Pairing fails and then the screen for the code shows up on the phone.
    I had a iPhone 3s paired with this Bluetooth, and once when I did a reset of that phone had this issue, put through many attempts it eventually paired. Despite many attempts, I cannot get the 4S running IOS 5 to pair.
    The phone does pair with a motorolla bluetooth ear piece.

    I've been having this issue since I got an iPhone 4S last week.  (Upgraded from iPhone 4 on iOS 5.0.1)
    I would think that this is a software issue but I went ahead and visited an AT&T store to see about a replacement phone.  I was directed to go to an Apple store which I then did.  I explained this bluetooth issue I was having as well as the other issue with no audio on outbound calls (described in a different thread) and they gave me a new phone.
    Well, I've tested it several times now with the nav/handsfree systems in two different cars as well as with my headset.  All is good so far!  No drop of bluetooth connection, can switch at will between audio sources and no lack of audio on outbound calls any more.  (And these problems were happening frequently before, even after a complete restore.)

Maybe you are looking for

  • How to obtain a device type id?

    Hi all - Sorry if this is a repeat question, but I'm trying to figure out if there is a J2ME call to obtain the type of device the application is running on, such as "Nokia 2600" etc...I would like to change the app functionality based on what type o

  • Alpha netting flag

    Hello All, I am sending the unpaid details info i.e. customer/vendor open items information to legacy. I need to send the Alpha-netting flag information too. What is this will indicates? Does any body know the field name that refers to Alpha netting

  • Preview form submission

    I'm so close but am missing something obvious. I've created a form (php/mysql). what I want to happen when users click submit is either: 1. results to show up in an update form. or 2. results to show up on a page with a link for users to update or ed

  • Infinity activation date passed. Tearing hair out.

    My BT Infinity 1 activation date was supposed to be the 9th October. The hub arrived 2 days before the activation date which was a comfort at the time. I contacted BT by phone on Friday 10th, Saturday 11th, Monday 13th and again today. EVERY time I g

  • Factory reset after power off

    I use Cisco switch sg300-28. When i turn it off and turn on, it reset to factory reset include login password, dose it normal operation or I miss anything? Thank you. Sent from Cisco Technical Support iPad App