IPhone 4 Can't receive incoming calls and sms after 3G has been activated

I can't receive incoming calls and sms on my iPhone 4 after the 3G connection has been activated and used actively by me. Outgoing calls and messages do work and as long as I use the Wi-Fi connection everything's fine but the problem appears after switching to 3G. Any help? Thx in advance!  

I think the next step is to do a reset by holding the sleep and home buttons down at the same time until the Apple logo appears.  If you haven't done this before, keep holding the buttons when the turn off slider appears.  The screen will go black and after what seems like an eternity, actually several seconds, the Apple logo will appear.  When the logo appears, release the buttons.

Similar Messages

  • Iphone 5s cannot call out any calls, but still can receive incoming calls and sms

    Hi
    anyone experiencing this problem? After buying iphone 5s less than 2 months which I never did in the past, I could no longer make any phone calls out, yet i still can receive incoming calls and data.
    Could someone kindly assist in this? 

    Contact your carrier. Phone functions are a carrier responsibility. Have them check your account. Are you seeing any error messages?

  • I´ve just changed my apple id password, and when trying to use Facetime, after having entered such new password, it won´t fullfill the calls, nor can I receive incoming calls, it simply gets disconnected. What do I do??

    I´ve just changed my apple id password, and when trying to use Facetime, after having entered such new password, it won´t fullfill the calls, nor can I receive incoming calls, it simply gets disconnected. What do I do??

    iOS: Troubleshooting FaceTime                  
    Unable to make or receive FaceTime calls after April 16, 2014
    Using FaceTime and iMessage behind a firewall
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Using FaceTime                               
    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • How to forbid any further changes for PO (QTY and price ) after it has been

    Hi,
    How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

    Hi,
    Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
    But quantity can be changed at any time.
    So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
    Ramesh

  • HT4059 Can I ad screenshots to my iBook after it has been published to the iBookstore as I didn't include them in the original publication.

    Can I ad screenshots to my iBook after it has been published to the iBookstore as I didn't include them in the original publication.

    Try to use "Lightbox Display" in "Widget Library->Compositions". "Widget Library->Slideshows" can only contain images.
    - Abhishek Maurya

  • HT5205 I am in Ecuador, I have an A1430 iPad using a 3D micro sim card, when they call me it sounds like busy tut tut tut tut how can I do to receive phone calls and sms

    I am in Ecuador, I have an A1430 iPad using a 3D micro sim card, when they call me it sounds like busy tut tut tut tut how can I do to receive phone calls and sms

    iPad are not telelphones. They do not receive calls nor do they receive or send SMS messages.

  • Why does my iPhone 5s not receive incoming calls

    My iPhone 5s does not ring when receiving incoming calls yet I have signal, do not disturb is off and I receive texts or voicemails notifying me of a missed call which I can return immediately. What is going on? How can I fix this?

    Yes the ringtone works. I know you are trying to help however I am fairly tech savvy and have eliminated all basic user defined settings that could cause the issue. The issue is not that there is no sound the issue is that there is no call incoming notification at all. The call does not connect to my Boone to even make it ring and display as a missed call

  • Bought a new phone and now we can not receive incoming calls

    This week I bought a new Panasonic cordless handset with no answering machine to replace our AT&T desk phone. I set it all up and waited the 7 hours for it to charge. Checked for dial tone, ringer, and volume. Called the house # from my cell phone and the screen on the Panasonic never showed an incoming call - kicked into voice mail (provided by Verizon) after the preset 5 rings so I left a test message. Panasonic screen showed a "1 new voice mail message". I was able to dial the voice mail access phone # and listen to my test message. Disconnected the new handset and reconnected our old phone - worked just fine. Returned the Panasonic to the store where purchased and exchanged for another (same model). Sales assoc. said there may be a code needed from Verizon. Spent hours on the phone attempting to speak to a real person at the customer service # and decided none work there anymore - everything was automated! After "4 digit pin" frustrations I gave up!
    So if you've read this far and can help I'd sure appreciate it! Line works fine, old phone works fine, checked ringer/volume on new phone. Only working phone jack in the house (used to have 2 but when we contracted with V last year they only changed over one - another frustration).   And how can I find out when our contract is up?!? 

    Your mostly talking to peers here.  Better off using the
    http://www22.verizon.com/support/residential/contact-us/index.htm
    option which is on all the Verizon pages.  Should always lead you to phone numbers (1-800-verizon) and often an online chat.  Sometimes will show you and email option.
    As far as peers helping we would need to know  what type phone service and general area of the country.  Obviously varies as I have had no trouble with panasonic, uniden and other phones at my two locations (NY and FL).

  • IPhone3GS screen white and look hang, while some Incoming Call and SMS

    Hi All,
    I don't know what happen on my 1 months old iPhone 3GS. Its hang and Screen became white (nothing can see just white color), while some times in Incoming Call as well as SMS, at the time I can't pick up phone call and can't see sms, because of screen is WHITE.
    Please help me some tips and advice.

    Thanks Phil,
    I feels as strange, sometime happen and sometime may not happy,
    in that situation, I need to press top (lock-unlock) button and after 20 seconds, it would be ok, SMS is ok for that situation, but I've missed some incoming call.

  • Skype not receiving incoming calls and messages- only when I sign in again will I receive

    My skype has been acting up after 7.6. Everytime someone calls me or messages me the first time it logs in, I wont receive a call or notification. Only when I sign out and sign back in will I get a notification saying I missed a call. But in the first place, I didn't even receive one. There was no pop up incoming call.  I also won't receive recent instant messages unless I repeatedly log in and outPlease help me find a solution. I've tried uninstaling and reinstalling 3 times already and the problem still persists . Thank you!

    Do any other SIM cards work in it ? Sounds like it could be blacklisted.
    Normally when a handset is blacklisted , you can send and receive SMS , but not make or receive calls.

  • Can I mute incoming calls and still use as a voice recorder

    I need to take notes during meetings and would like to use an iphone as a voice recorder as a back up as well as taking written minutes. Can I put the iphone into a silent mode so that the meeting is not disturbed if I get a call or SMS but still be able to use the voice recorder? I would like to be able to press record at the start of the meeting and just leave it running for the duration.
    Also, if I fully charge the battery before, will the iphone keep recording for 1.5 hours?
    And.. what is the best voice recording app for meetings and lectures/talks?

    Hey
    It sounds like you're looking for airplane mode, which disables the wireless features of your iPhone while still allowing you to use other applications. You can read more about it here:
    iOS: Understanding airplane mode
    http://support.apple.com/kb/HT1355
    Also, the iPhone comes with an application called Voice Memos that lets you use iPhone as a portable recording device. You can read more about it on Page 105 of the iPhone user guide here:
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf#page=105
    Cheers,
    David

  • Contacts ID displaying differently when receiving voice calls and sms

    Dear BB Support Community, 
    I have an issue with my Classic device that has been quite frustrating (I am very new to BB).  When I receive a phone call from one of my contacts, I can see who is calling. But when the same person sends a text message, only their phone shows up. The device is not connecting that number with the existing contact name.
    One of the causes of the problem is that my carrier, for some reason, decided to use the number of the caller without the country code when the person is making a phone call (something like 0xxxyyyyy). But when the same person is sending a text, the carrier adds the country code to that number (+ccxxxyyyyyy).
    What is frustrating is that all other android and nokia phones I have used previously had no problems with this difference on the carrier's use of area/country codes. But BB10 seems not able to connect these two numbers. 
    Can anyone help me?

    Open the phone app. swipe down from the top and go to Settings. Then go to Smart Dialing. Make sure the proper country and area code info is stored in there.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Can't reset incoming call during conversation after upgrade to IOS 5

    Right after migration to IOS 5 I discovered that it's impossible to drop incoming call during conversation. I mean when you pressed power button twice in IOS 4 call must be transferred to voice mail or resetted. It was fine before migration to 5th version pf OS. I tried to reset my phone to manufacture settings but result was the same.
    Does anyone met the same with new IOS?

    Weird, I can't edit my messages here...
    It doesn't matter once or twice the button was pressed - both calls are resetted.

  • Incoming call and sms

    When i get incoming sms and call some contacts not show from contacts.
    All numbers described in external coding +(country code) local number.
    Anybody know whats the problem ?
    Solved!
    Go to Solution.

    I've read other russian users say the same, that screen is dependent on SIM card inserted.
    You do have the Phone > Settings screen, just you do NOT have the Smart Dialing screen?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My wife's Iphone 4 shows an excessive number of emails after trash has been emptied.  What is the fix for this?

    My wife recently emptied her email trash.  All emails were deleted, the Email icon shows a number of almost 4,000 emails.  Since trash is definately empty, how can this excessive and false number be removed?
    Thanks,
    Bewildered and Wondering!

    Delete the account and re-add  it. 

Maybe you are looking for

  • How do I install DW on my new computer when my account tells me  "You have no downloads" ?

    I have deactivated DW on my old computer.  When logging into Adobe on my new computer and selecting to download DW, I get a screen that reads, "You have no downloads."  How do I install DW on my new computer?

  • Required SAP SD process Flow PPT's

    hi Sd Guru's i required SAP SD process Flow PPT's for KT session purpose so if anyone got this please send me to [email protected] thanks &regards tharakjram

  • Pay After Delivery Payment Problem

    So I mainly use Pay After Delivery and all is fine. Problem is I have two ways of paying. One is the first that is paid through my bank that is linked with my debit card, the second is a backup debit card I mainly use. The problem with Pay After Deli

  • OSB JMS proxy.  Determine when processing is complete

    Basically, I need visibility into how many rows the JMS adapter is processing and when it is complete. I am doing a simple request\response proxy where the response is a second queue. Basically, it just moves messages from one queue to another. In ou

  • Always have issues downloading iPhone software updates

    I have ongoing issues downloading iPhone software, I've been trying for weeks to get the latest update. It will begin to download and get relatively close then time out, my internet connection disconnects and I get an error message in iTunes that the