IPhone 4 cannot access wifi from airport

Both my girlfriend and I have iPhone 4's. We cannot access wifi from my personal home airport. When we go to log into wifi and we type in the password, we receive a prompt saying, "Incorrect password for....". I am writing this on my MacBook, logged into my wifi, with the same exact password???????
I've tried everything. Resetting iPhone, MacBook, and Airport. I also tried resetting my password and resetting the network settings. I don't know what else I could possibly do. It's frustrating because my girlfriend is on a data plan and can't utilize our wifi.
Any ideas???????

outdated wifi router wifi most likely

Similar Messages

IPHONE 4S CANNOT ACCESS WIFI

Cannot connect to wifi grayed

My iphone 4s is also completely useless when it comes to connecting to wifi. It won't even detect connection spots.   I do not know what happened but other people with other apple products do not seem to have a problem.
Depending on location it occasionally catches it, however it has been down for WEEKS now.   I purchased my phone from the apple store in January.   It should not be acting like this regularly.
I tried resetting the network settings.   Nothing works.
I am afraid to reset it to factor settings because I feel this is an internal problem with the phone, not the software itself.
I am not in North America right now, so the only thing I can do is be inconvenienced and wait. Unless there are other suggestions?

My iPhone frequently cannot access wifi

Recently my iPhone 4S has become quite random when it's accessing the net via wifi. About 80% of the time it thinks there is no network and 20% it's fine. I access the same wifi networks that I have been using before. When this happens I can get access to mails etc by disabling the wifi and connecting via 3G. However this in not a very practical solution. Has anybody got any ideas? I have re-set the phone but the prolem persists.

The basics from the manual are reset, restart, and restore.
Have you tried any of these?

My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

Are you testing in the same room as the TC?
Power cycle the TC.. does it show up now?
Has it ever showed up .. ie is this a problem that just started from an existing setup, or has never worked?
Is the TC new? If old how old?
If you continue to have issues.. setup the TC from iMac and preferably using ethernet.
Change the wireless names to SMB compatible ones, short no spaces, pure alphanumeric.
Use WPA2 Personal security only.
Then set the wireless channels manually.. try 11, 6, 1 for 2.4ghz and try 36 or 40 at 5ghz.
Tell us how that goes.

I have a National Lottery online account but for a while now i cannot access it from my MacBook. I can access it via other pc's and laptops and via my iphone. I have been on to the NL helpline and they say the issue is with cookies and my MacBook. Help!

I have a National Lottery online account but for a while now i cannot access it from my MacBook. I can access it via other pc's and laptops and via my iphone. I have been on to the NL helpline and they say the issue is with cookies and my MacBook. Help!

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

I cannot access itunes from any of my apple product, imac, iphone, mac book, ipad, or apple TV

I cannot access iTunes from any device. It's telling me that itunes is temporally unavailable. It's not my connection, app, software, or device. I'm prett savvy with IT and it has to be on the other end. All of my devices didn't bite the dust at the same time. If they did S%&T!!

You are right- they got to let us know that status or something. Here I am already to sit down and relax with a nice episode of Dexter and cannot access anything. it was fine this morning and now its annoying.

My Iphone 3g cannot detect wifi

my iphone 3g cannot detect wifi and the bluetooth is not working as well it can't detect bluetooth also... help me

The basics from the manual are reset, restart, and restore.
Have you tried any of these?

TS1398 The WEP password to access WiFI from Time Warner is 12 numbers and letters plus 14 zeros. Can I expand the available space in the space for entering passwords

The WEP Password to access wifi from Time Warner cable is 12 numbers and letters followed by 14zeros. The available space to input password is unequal to the task? Time Warner advised to call Apple. Any one with a suggestion on how to either 'customize' WEP or expand available password input space? Better ideaS?

wjosten - I was using a WEP password of greater than 13 characters with no problem.
Mondayblues - Are you saying that you cannot set your own password for your router/modem? You should be able to access it from an ethernet connected computer and change the password to suit yourself. If it's not more than about 4 years old, you should be able to use WPA instead of WEP, which is much more secure. Google "time warner modem yourmodel" to find the user manual and the URL to access the modem.

I am in Singapore and have a Starhub prepaid SIM card. I cannot access wifi although it is visible on my network list. Do you now if I have to change any settings?

Hi, I am in Singapore and have a Starhub prepaid SIM card. I am a Verizon (US) customer but want to access WiFi. My device shows being connected but I cannot access wifi. Do you know if I have to change any settings to access wifi on a SIM card?

hi, this thread already deals with the issue:
How can I prevent getting calls from number that are not in my address book?

Can,t access wifi via airport after left my mbp idle for just 1 minute

i can,t access wifi via airport after left my mbp idle for just 1 minute, i need to turn airport off & turn airport on if i left my mbp idle for just 1 minute or less...why this thing happen? anyone can help thanks in advance

Something that came to mind after rereading you post relates to the particulars of a "hard" reset on the Snow.
A “hard” reset removes current setting from the base station. You must then connect to the base station using the AirPort Admin Utility and upload AirPort 2.0 or later software to return the base station to its default settings. A base station in a hard reset is only accessible through the LAN port, not via wireless connections ... so attempting to access with the AAU, via a wireless client, will not work.
The following is the process to reload the AirPort software: AirPort Base Station (Dual Ethernet) : How to reload software from Mac OS X

I cannot access itunes from appletv to rent a movie. I just get the perpetual clock after clicking the verification ok box

I cannot access itunes from appletv to rent a movie. I just get the perpetual clock after clicking the verification ok box

You could try using the wifi only when you need it. This could cut down the number of times you will have to press OK. It won't fix it but it could help.

IPhone 3GS cannot access to 3G network after upgrading to OS 5

My iPhone 3GS cannot access the 3G network after upgrading to OS5. I have checked with my operator and shows that their 3G network is working fine. Only cannot access through the phone. When I enable 3G, there will be no service for my phone. Wifi is working fine.
Any idea how to resolve this?

zlwczr wrote:
Thanks, I will try this method. After restore and syn, will it automatically upgrade back to OS5?
No. If you have 5.0.1, then you will get 5.0.1 back. Restoring should still fix it though. I would prefer to have you back up to iCloud, because there are many known issues/errors when trying to restore via iTunes on iOS 5 or later.

Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to.

Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to. I did not have any problems before the upgrade. I would greatly appreciate any light shed on this.

Go to the HP site and look for drivers for your scanner. It apparently needs an updated driver to work with Mavericks.

ORA-22905: cannot access rows from a non-nested table item in Table func

I am using a table function in Oracle 8.1.7.4.0. I did declare an object type and a collection type like this:
CREATE TYPE t_obj AS OBJECT ...
CREATE TYPE t_tab AS TABLE OF t_obj;
My table function returns t_tab and is called like this:
SELECT ... FROM TABLE (CAST (my_pkg.table_fnc AS t_tab)) ...
This works pretty well as long as I run it in the same schema that owns the function and the 2 types. As soon as I run this query from another schema, I get an ORA-22905: cannot access rows from a non-nested table item error, even though I granted execute on both the types and the function to the other user and I created public synonyms for all 3 objects.
As soon as I specify the schema name of t_tab in the cast, the query runs fine:
SELECT ... FROM TABLE (CAST (my_pkg.table_fnc AS owner.t_tab)) ...
I don't like to have a schema hard coded in a query, therefore I'd like to do this without the schema. Any ideas of how to get around this error?

Richard,
your 3 statements are correct. I'll go ahead and log a TAR.
Both DESCs return the same output when run as the other user. And, running the table function directly in SQL*Plus (SELECT my_pkg.table_fnc FROM dual;) also returns a result and no errors. The problem has to be in the CAST function.
Thanks for your help.

ORA-22905: cannot access rows from a non-nested table item

Hi All,
This is the overview of the query used in the package.
select ename,empno,sal,deptno from
(select deptno from dept) a,
(select ename,empno,sal from emp1) b
where empno in (select * from table (pkg1.fun1('empno')))
and a.deptno=b.deptno
union
select ename,empno,sal,deptno from
(select deptno from dept) c,
(select ename,empno,sal from emp2) d
where empno in (select * from table (pkg1.fun1('empno')))
and c.deptno=d.deptno
Here the pkg1.fun1 will convert the string ('empno') into table form. ('empno') is the input parameter to the package and is a string of emp numbers.
compilation is successful. when this is executed the below error pops up
"ORA-22905: cannot access rows from a non-nested table item"
Is there any problem with the table function which i am using in this query
could anyone guide me to the solution.
Thanks All

I have used
CREATE OR REPLACE
type tab_num as table of number;
select * from table (cast(pkg1.fun1('empno')) as tab_num))
This throws an error during compilation itself
"PL/SQL: ORA-00932: inconsistent datatypes:expected number got varchar2

IPhone 4 cannot access wifi from airport

Similar Messages

Maybe you are looking for