Iphone 4 dies and requires reboot
Two days ago, my iPhone 4 completely shut down and would not come back on until I did a hard reboot (holding the power & home buttons). It worked fine the rest of the day, but it did it again today. Both times the battery was charged more that 60%. The phone was on my hip and I had not touched it in some time. Can anyone give me some suggestions besides going to the apple store?
I guess I'm having the same issue... several people had complained about trying to call me without success. Every time it happens, when I take a look at the phone it states "Searching..." in the where the 3g sign normally stands. The another not normal behavior is constant failures when sending SMS... I'm forced to reboot the device. I'm almost sure that this symptoms had started after 4.2.1 upgrade.
Similar Messages
-
When I Click on "Import", Lightroom 5.5 stops working and requires reboot; Help. Import feature was working yesterday when I first installed Lightroom v5.5.
Go to the bibliothec module, select the folder, right click on the folder and hit synchronize
Sorry I have only a german version , so don't know what your menu will show. -
When my iphone 3G dies, and i plug it in, it shows the apple sign but never turns on ???
help me! when my iphone 3G dies, and i plug it in, it shows the apple sign but never turns back on !!!!!!
When the phone shows only the Apple logo it usually indicates an issue with the system software that is preventing the phone from completing the boot sequence. This can be remedied by putting the phone into DFU mode and restoring the system software. This will remove all data and software from the phone and put a fresh set of system software on the phone, so hopefully you have a recent backup.
To put your iPhone/iPod into DFU mode:
1. Make sure the iPhone/iPod is connected to the computer
2. Hold down the sleep/wake button and home button at the same time for 8 seconds
3. Let go of the sleep/wake button and keep holding down the home button
4. If you are successful, a dialog box will pop up in iTunes stating that iTunes has detected an iPod/iPhone in recovery mode. Note that a successful DFU will result in a blank black screen on your iPhone/iPod.
5. Click OK, then click the restore button in iTunes.
After that you will be able to resync your data and be good to go.
Hope this helps. -
System unstable and requires reboot after 24 hours - HELP
I did a clean install of Leopard twice and the same issue appears. The system becomes unstable and requires a reboot. Mail doesn't function correctly and Firefox gives an error, "Another copy of Firefox is running. Only one copy can run at a time'.
The only option at this point is to reboot, however the system hangs on shutdown.Sorry for the delay and thanks for the response. what I mean by unstable is that the system will not perform as expected. The problem seems to be growing however. It use to only occur after 24 hours of up time. Now it seems to occur after the system goes to sleep. Twice I have put the system to sleep and each time when it wakes, I can not do anything. If I click an application Firefox, Yahoo, iChat, Mail, etc it will not respond. Forcing a quit on the application does nothing. Each time I have been forced to bring the system down hard. -Any help is appreciated.
-
Sound just dies and requires a restart
I sometimes have to frequently switch between using my headphones and the MBP's internal speakers. Often enough to be very frustrating, the sound just dies and refuses to come back on when I make a switch like this. Settings tell me everything is all right but the only thing that fixes this problem is a restart.
I am getting sick of restarting my MBP ...Hopefully one of these steps should solve the problem.
Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
My iMac goes blank and requires rebooting while surfing the web and ads change
I have a Early 2008 iMac refurb that occasionally locks up and the display goes blank while online and you have to reboot. Any clues?
Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that. -
Interval Since Last Panic Report: 100448 sec
Panics Since Last Report: 1
Anonymous UUID: B1970402-99ED-4874-AE1C-17059BA38872
Fri Apr 29 09:37:18 2011
panic(cpu 2 caller 0xffffff80002d11f4): Kernel trap at0xffffff7f80bf91f6, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000000bc9f000, CR3:0x0000000000100000, CR4: 0x0000000000040660
RAX: 0xffffff7f80bf9386, RBX: 0xffffff800f2f22c0, RCX:0xffffff805ac6de00, RDX: 0xffffff8059e6bd10
RSP: 0xffffff8059e6bcf0, RBP: 0xffffff8059e6bda0, RSI:0xffffff800eafbd00, RDI: 0xffdb31e7894c2404
R8: 0x0000000000000042, R9: 0x0000000000000000, R10: 0x000000000000009e, R11: 0xffffff80004f4e7e
R12: 0xffffff7f80bf7f3a, R13: 0xffffff7f80bf933e, R14:0xffffff805ac6de00, R15: 0xffffff8059e6be8c
RFL: 0x0000000000010246, RIP: 0xffffff7f80bf91f6, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 2), Frame : Return Address
0xffffff8059e6b990 : 0xffffff8000204d15
0xffffff8059e6ba90 : 0xffffff80002d11f4
0xffffff8059e6bbe0 : 0xffffff80002e3f1a
0xffffff8059e6bbf0 : 0xffffff7f80bf91f6
0xffffff8059e6bda0 : 0xffffff7f80bf950c
0xffffff8059e6bdc0 : 0xffffff7f808a372d
0xffffff8059e6be00 : 0xffffff800053c6cd
0xffffff8059e6be50 : 0xffffff7f808a2b82
0xffffff8059e6be70 : 0xffffff7f808a3083
0xffffff8059e6beb0 : 0xffffff7f808a3260
0xffffff8059e6bed0 : 0xffffff800053bdd4
0xffffff8059e6bf10 : 0xffffff800053b2b7
0xffffff8059e6bf60 : 0xffffff800053af5d
0xffffff8059e6bfa0 : 0xffffff80002c84f7
KernelExtensions in backtrace (with dependencies):
com.apple.driver.AppleUSBEthernetHost(2.1.1)@0xffffff7f80bf7000->0xffffff7f80bf cfff
dependency: com.apple.iokit.IONetworkingFamily(1.10)@0xffffff7f80894000
dependency: com.apple.iokit.IOUSBFamily(4.2.0)@0xffffff7f80db6000
com.apple.iokit.IONetworkingFamily(1.10)@0xffffff7f80894000->0xffffff7f808adfff
BSD process name corresponding to current thread:kernel_task
Mac OS version:
10J3250
Kernel version:
Darwin Kernel Version 10.7.3: Sun Mar 6 13:37:56 PST 2011;root:xnu-1504.14.2~1/RELEASE_X86_64
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 13023511508138
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0xffffff7f8109d000, size 0x65536) - lastunloaded 100579451710
loaded kexts:
com.apple.driver.AppleUSBEthernetHost 2.1.1 - last loaded 11869908071980
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.IOBluetoothBNEPDriver 2.4.4f2
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 2.0.2f10
com.apple.driver.AppleUpstreamUserClient 3.5.4
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleMikeyDriver 2.0.2f10
com.apple.driver.AudioAUUC 1.54
com.apple.driver.AppleIntelHDGraphics 6.3.2
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.6.0d12
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.0.46
com.apple.kext.AppleSMCLMU 1.5.2d6
com.apple.driver.AppleIntelSNBGraphicsFB 6.3.2
com.apple.driver.AppleUSBTCButtons 201.2
com.apple.driver.AppleUSBTCKeyboard 201.2
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.6
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AirPort.Brcm4331 429.10.2
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleUSBHub 4.2.0
com.apple.iokit.AppleBCM5701Ethernet 3.0.2b8
com.apple.driver.AppleSDXC 1.0.2
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleAHCIPort 2.1.6
com.apple.driver.AppleUSBEHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.4.1
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 142.4.1
com.apple.driver.AppleThunderboltDPOutAdapter 1.1.1
com.apple.driver.AppleThunderboltDPInAdapter 1.1.1
com.apple.driver.AppleThunderboltDPAdapterFamily 1.1.1
com.apple.driver.AppleThunderboltPCIDownAdapter 1.0.5
com.apple.driver.DspFuncLib 2.0.2f10
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleThunderboltNHI 1.1.9
com.apple.iokit.IOThunderboltFamily 1.2.2
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.4f2
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.2f10
com.apple.iokit.IOHDAFamily 2.0.2f10
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.IOPlatformPluginFamily 4.6.0d12
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.4f2
com.apple.driver.AppleUSBBluetoothHCIController 2.4.4f2
com.apple.iokit.IOBluetoothFamily 2.4.4f2
com.apple.driver.AppleUSBMultitouch 207.5
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.6
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.6
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOUSBUserClient 4.2.0
com.apple.iokit.IOAHCIFamily 2.0.5
com.apple.iokit.IOUSBFamily 4.2.0
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.2
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors,Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000,Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme(0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.10.2)
Bluetooth: Version 2.4.4f2, 2 service, 19 devices, 1incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298,09 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0246, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0xfd120000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3How often do they happen? What exactly are you doing when they happen? Do you have any external devices plugged in?
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
My iPad 2 has given me many months of hassle free usage. I have recently [earlyApril] updated the software. Now every time I go to use it I am forced to hold bottom and top button to boot IPad .Eventually it kicks in and as long as I'm using it its fine. If I leave alone it goes down and requires rebooting.
Have tried total factory reset and it continues to malfunction. apple have informed me that a hardware repair would be £206 for a fix or replacement.I find this unacceptable considering the iPad has been well cared for & never dropped etc .Any help greatly appreciated.So, I have managed to get my iPad to stop showing the "connect to iTunes" screen. I did this by plugging it in to my husband's PC and trying to restore from the backup I left there many many months ago.
The restore FAILED error 3194 (I looked it up it's the same error as the one I got on my macintosh "device is isn't eligible for the requested rebuild"
But the restore attempt mad the "connect to iTunes" screen go away, now it has 4.3.1 again with the special multitouch update.
BUT I STILL CAN'T RESTORE! Why not? I've been searching all over the web and I can find nothing that helps.
It's not like I jailbroke it... can anyone help me please? -
Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..
Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).
iPhone 4S, iOS 5.1.1, VW bluetooth -
iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?
Instructions to get the phone back working temporary.. till there is a real fix.
1. turn off the phone
2. fire up iTunes
3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
5. iTunes will then ask you to choose which previous backup to would like to recover.
(note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1) -
Iphone 5 crashes and reboots randomly while launching apps
Got my phone yesterday. Bought used. Yesterday it was working fine (no apps installed, "nude" iphone) today I was trying to download apps through app store.
Appstore was crashing all the time, 1st just exiting, after next try - frozen screen and reboot. After some reboots the phone won't start and require a recovery by itunes. This happened more than 4 times today.Once I got an error while recovering , the phone was showing apple logo for some time, then virbo - twice, and then again. But hopefully after some tryies I was able to recover. After last recover, my screen was flickering (setting off the auto-brightness ,waiting and switching on helped.
So the question is: All this strange behavior is a software or hardware problem? How to fix it?
Iphone 5 32gb ios 8.1.3Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem. -
My iPhone 5 dies at 20-24% it doesn't go all the way to 0%. Will apple replace my phone or fix my phone for free since its hardware problem and I have no money. This is my second iphone 5 replacement. I have no apple care so I'm worried. My phone has NEVER touched water! I only get 1/5 of battery use. I've also spent 30$ at the apple store on screen protectors for nothing! I really don't have 220$ nor 50$ I am on a strict budget. I believe I have to pay 220 not 50 ford a phone replacement for accidental damage. I don't know what category this falls under. I really need a new phone or battery. HELP! Will I have to pay? Also my screen lighting is all topsy-tervy every I put my screen on highest it won't work I have to wait about a minute? Forgot to mention that my apps exit out by themselves all the time when Im using them.
So, have you tried a reset? Restore from backup? Restore as new? You seem to have a few problems but do not mention any action taken to resolve them. What have screen protectors to do with anything?
-
I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran. -
my iphone 4 says activation required and then connect to itunes and when i try to connect it wont what do i do (i cant use it at all) :'(
i got it from O2... and it dosent do anything when i plug it into my laptop it dosent come up at all or connect to itunes
-
i have an iphone 5 , i restored it but now it stuck on the activation and required an icloud id and password to begin, but i dont know about id i purchased it from saudi arabia and now i am in pakistan. how can i activate this iphone 5????
please help!!!!!!!!!Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.
Maybe you are looking for
-
Getting error while importing a table partition
Hi, I am trying to import a table partition from OEM and occurred with following error: Job IMPORT000042 has been reopened at Friday, 13 June, 2008 14:44 Restarting "SYSMAN"."IMPORT000042": Processing object type TABLE_EXPORT/TABLE/TBL_TABLE_DATA/TAB
-
When are you applicable to get a replacement for an iphone 5?
I got my iphone 5 about 7 months ago and I have a 1 year warranty on it. It's been a while and my phone has been starting to act up in ways of: The lock button not working unless pressed hard on the left side When i'm typing a message the screen tend
-
How do we submit a new build/update to the stores?
We have an active/live app that was previously done by an agency via their own server. We have terminated their service, and now via Adobe DPS, how do we submit a new build/update to the stores (instead of submitting as a new app)? We are new to Adob
-
Safari 3.0.2 - User Style Sheet not working at all
Well, at least 3.0.2 doesn't crash when using a custom style sheet, nor does it display a Javascript error. But, that's probably because it doesn't work at all! I tried loading a custom sheet that would block ads, but it didn't work. So I set a test
-
SQL 2008 Overflowed an int but the value is..integer...
Hi guys, having create table #rete (mpo int) insert into rete (mpo) values ('2380001112857') The conversion of the varchar value '2380001112857' overflowed an int column Why? I'm inserting two million rows but I'm struck because this stupid issue. I