Iphone 4 disabled connect to itunes cant restore
My 4 year old entered my passlock code too many times now it says my phone is disabled and i need to connect to itunes. I have backed up my phone and connected to itunes before but now for some reason itunes is not seeing my phone when connected?? I need my phone how can i reset it and why is itunes not seeing it?? please help
Well, in order to get pass this disabled devide, you're goign to have to put it into Recovery mode. iTunes will ask you to put the passcode in to be able to use it. Here is the article on Recovery mode: http://support.apple.com/kb/ht1414
The problem with the back up is if that passcode was enabled when you made it. If you restore the back up, that passcode will come right back. But you can try it if you're not sure! Hope this helps!
Similar Messages
-
I disabled and blocked my phone when it was stolen, i have retrieved the phone and restored service. Now when i turned it on it says iphone disabled connect to itunes.. I have and no change, what do i do?
You need to restore the phone in itunes in order to use it again, You will have to put the phone into recovery mode and restore to factory settings http://support.apple.com/kb/ht1808
-
Hi my friend gave me an iphone but on the screen it says 'iphone disabled connect to itunes
I have got an iphone 3 from my friend that had been used by his ex wife. The phone says ' iphone disabled connect to itunes.
She 'cant remember her passcode'
I have put the phone into restore mode and connected to itunes, ( i downloaded the latest edition ) but it says its going to take 3 hours to download software - its still downloading and then earlier I got an error code oxE800002D. I cant find the error code so dont know what it means.
I dont know if I am wasting my time trying to get it working or if it will be possible to get the phone in working order ( with lots of help from you all :-) )
Any help or advice will be gratefully recievedThanks.
I did this and moved on a little but now am getting error code 3194.
i looked on the support site but dont really understand
Any ideas ? -
HT5576 IPHONE DISABLED CONNECT TO ITUNES PROBLEM?!
I Have changed my password to my iphone and i forgot it may times and it failed until it said iphone disabled connect to itunes i connected it to itunes now i cant figure out how to unblock it from itunes can anyone help me out with this problem pls thank you~!
You will have to put your phone into recovery mode and then restore it using iTunes..
Follow the steps in this article to complete recovery mode and restore--
http://support.apple.com/kb/HT1212
Hope this Helps
Good Luck! -
HI,
I HAVE AN IPHONE4, I CHANGED MY PASSCODE BUT FORGOT WHAT IT WAS THE NEXT DAY, AFTER SEVERAL ATTEMPTS TO UNLOCK MY PHONE BECAM DISABLED AND SAYING IPHONE DISABLED CONNECT TO ITUNES, HOWEVER MY PHONE ISNT SYNCED TO ITUNES NOR A COMPUTER, PLEASE TELL ME WHAT DO I DO AND HOW TO REGAIN ACCESS TO MY PHONE?You will have to put your phone into recovery mode and restore the phone as new. Since you don't have a back up, you will lose all the data on your phone but you will be able to use it again.
Use this article iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US
Good luck! -
My phone says iphone disabled connect to itunes, what do i do to get my phone back
Connect the iPhone to your computer and restore via iTunes. Place the iPhone in Recovery Mode if necessary to allow the restore.
For how to restore:
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad -
The number pad would not let me type in a 1 2 3 for my 4 digit code. After numerous tries, the phone now says iphone disabled connect to itunes. When I connected to itunes, it asked for the code which I was unable to enter. Help!
Open iTunes on computer, connect iPhone to computer with USB cable. Hold both Home and Power buttons on iPhone until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.
-
How can I access an iPhone when I receive a message saying iPhone disabled connect to iTunes?
How can I access an iPhone when I receive a message saying iPhone disabled connect to iTunes?
Tried connecting to itunes and hitting restore and get a error message 3194.
Any help would be greatly appreciated.odds are entering password too many times
-
Iphone disabled connect to itunes
Hi,
My daughter has forgotten her password on her iphone and after too many attempts, it says iphone disabled, connect to itunes. I connected to itunes but now what? Am I going to need to restore and all is erased?
Thank you for any help,
SherylI synced the phone and it is back to the normal enter passcode screen, it's not disabled. What do I do at this point. She knows the 4 numbers that she entered but does not remember the sequence and I don't want to start trying them again. Any advice what I can do at this point?
-
IPhone disable, connect to itunes
Hi,
I dropped my iPhone 4 in the toilet about a month ago and it stopped working, i put it in rice and left it. I went to try and turn it on today and it worked, but it says "iPhone disabled, connect to iTunes" so I connected it to iTunes and it says "to allow access, please respond on your iPhone" but my iPhone won't let me have access unless it's connected to iTunes. Lose lose. It may be because the computer that my phone is backed up to is in another country. Please help if anyone has any answers. TYConnect to iTunes on computer and enter Recovery Mode. Here are easy steps. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Click the Restore button of iTunes.
-
If my iphone says iphone disabled connect to itunes what do i do?
If my Iphone 3GS says Iphone disabled connect to ITunes what do it do??????
Connect to iTunes and put iPhone in Recovery Mode to Restore. Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power butttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes.
-
HT1688 my iphone is locked, it said iphone disabled connect to itunes
my iphone us locked, it said iphone disabled connect to itunes.
If it is locked from entering the wrong passcode too many times you'll have to restore it with iTunes on the last computer it was synced with. If you don't have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device. See http://support.apple.com/kb/HT1212.
-
Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..
iOS: Forgot passcode or device disabled - Apple Support
-
My daughter has managed to forget her new passcode and now it says iphone disabled connect to itunes, but it wont let me....help!
Hi there esbrewer,
You may find the troubleshooting steps in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
If the device is not being recognized in iTunes, take a look at the article below for some additional troubleshooting steps.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
TS2734 iphone 4s, iphone disabled connect to itunes how can i do solve this problem?
iphone 4s passcode blocked & say iphone disabled connect to itunes how can i enable this passcode unlocked ?
https://discussions.apple.com/message/18310137#18310137
Do what is suggested in this thread and restore
Maybe you are looking for
-
How to install the JDI and what re the prerequisites
Hi All, Anybody tell me , AS iam new to the SAP NetWeaver How to install the JDI, I have got one document in sdn . It has given the prerequisite as. Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine Should i install all the above co
-
How do I convert a pdf to excel?
I am having trouble converting a pdf to an excel file. Help!
-
Cannot find OracleInProcServer.dll in the 64 bit Oracle 11g r2
We have been using OracleInProcServer.dll in our applications to access oracle spatial features. However, with the new 64 bit oracle 11g r2, I cannot find the OracleInProcServer.dll file. I have tried to use the old OracleInProcServer.dll (32 bit fro
-
How to Enter Event Parameters in FM SAP_WAPI_CREATE_EVENT_EXTENDED
Hi, I am trying to trigger theEvent 'START_RM_WEBREQ' for an ABAP Class 'CL_HREIC_RM_WORKFLOW' using the above mentioned FM. Usually this can be done using SWUE, however I am asked to do it create a custom program that would do the functionality for
-
Planning multiple machines for one planned order
Hi, presently, we have 30 machines in single operation, business wants to plan and confirm the production order with individual machines ( Workcenter ), we have tried individual workcenter creation and make the routing with 30 machines and planner ha