Iphone 4 Display opens app by himself after 6.1.2. Update
After the Update to 6.1.2. on my Iphone 4 the display opens App by himself without touching it - made several reinstallation incl. DFU Mode and manual update without any success. The Iphone mostly starts to open favorites and notices and video app - sometimes you can write SMS without any problem sometimes you are unable to touch the right butto.. If you touch the home button double and try to close apps but you are not able to close the apps or you did not get in the mode to close apps - ths iphone conditions is like new no scatches , never felt down , no water - just update from 5.0 to 6.12
PLS HELP - THANKS
Still having this issue - used to be able to connect prior to this update - The iPhone has no problem auto joining the local Cable WiFi - but still doesn't show the Time Capsule WiFi SSID's in the list. iPad and three other Macs see and can join the Time Capsule WiFi.
Similar Messages
-
I had 5 videos that I could see in videos apps. But after your last OS update I can't find them on my iPhone. I can see them on the pc in itune when I connect the iPhone and go to videos directory.
When syncing, check the Movies/TV Shows Tab in the iPhone menu, and make sure ALL movies are synced (or select the ones you want to sync)
-
hi my girlfriend iphone 5 is switching off himself after few minutes of useing him.i charged him full then I install the newest softwer plus is after reset to the factory settings...its showing flat battery but was charging full???and still is switching off after some time.please help
romifrommidleton wrote:
Help some ideas thas what we askin all here...thanks anyway
Do you not understand English? The "idea" we have given you is TO TAKE THE PHONE TO AN APPLE STORE OR AUTHORIZED SERVICE PROVIDER!!!
If you want to follow the advice is up to you. No one here really cares what you do in the end. -
I cannot delete the open apps as earlier after double clicking the start button
I cannot delete the open apps as earlier after double clicking the start button after the new update
Force close apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen
http://support.apple.com/kb/ht5137 -
iPhone 4 still gets crashed even after ios 7.1 update, & sometimes fails to reboot! However it gets rebooted after 30 to 60 mins later by itself. "HELP" please somebody
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use... -
Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.
Maybe here:
IOS 6 App store crash: Apple Support Communities -
Still cannot open App Store even after 10.6.8 Combo Update
Any help on this would be most appreciated. Thanks in advance.
I need to get the App Store working so that I can re-install a Lion upgrade that I already purchased before. I had to replace my HD and now with 10.6.8, the App Store will not open.
I have installed the 10.6.8 Combo Update and then done the other software updates through the System Preferences.
This still comes up when I try to open App Store:
"App store cannot be opened because of a problem.
Check with the developer to make sure App Store works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
Click Report to see more detailed information and send a report to Apple."
This is the "Problem Details and System Configuration":
Process: App Store [389]
Path: /Applications/App Store.app/Contents/MacOS/App Store
Identifier: com.apple.appstore
Version: ??? (???)
Build Info: Firenze-630100~1
Code Type: X86-64 (Native)
Parent Process: launchd [149]
Date/Time: 2012-06-06 18:07:10.498 -0700
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 538 sec
Crashes Since Last Report: 54
Per-App Crashes Since Last Report: 3
Anonymous UUID: 9639C764-6944-44CC-BD36-A7F304335113
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/Install.framework/Frameworks/DistributionKit. framework/Versions/A/DistributionKit
Referenced from: /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/CommerceKit
Reason: image not found
Binary Images:
0x7fff5fc00000 - 0x7fff5fc3be0f dyld 132.1 (???) <29DECB19-0193-2575-D838-CF743F0400B2> /usr/lib/dyld
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2 GHz, 2 GB, SMC 1.17f0
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x87), Atheros 5416: 2.1.14.6
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS727575A9E364, 698.64 GB
Parallel ATA Device: MATSHITACD-RW CW-8221
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x1d200000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000 / 2Try uninstalling the App Store app using this utility > Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
Just moving the App Store app to the Trash doesn't delete all the associated files.
Then try the Mac OS X 10.6.8 Update Combo
Restart your Mac after the combo is installed.
See if that will reinstall the App Store so you can re download Lion.
At some point, you may need the original install discs even if that works.
Replacement disc(s) from Apple: You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available. -
Apps not working after 2.0.1 update
After installing the new update when I try to use any of the apps I downloaded they open for a second and then close right away and return back to the app screen. Is this because of the update? anybody else experiencing this?
Hi,
I had the same problem, solved 'buying' a free app from AppStore directly from the iPhone, via wifi.
Hope this helps... -
Iphone 4 turns off at 20% after iso7.0.2 update any ideas
Can any one help
Hello Callykay,
I would be concerned too if my iPhone was unexpectedly powering off. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
IPad Air Apps keep crashing after iOS 7.1 Update
Hi, I just upgraded to ios 7.1 on my ipad air. Everything was working fine before the update. But after, everytime I try to open any app, it attempts to start, but then immediately crashes. Even when I download an app from the app store, it still crashes. I have tried everything (restart, reset, hard reset, etc.) and I can't think of anything else to do but replace it which I don't want to do.
Hello jscott1997,
It sounds like all your apps are closing when you open them, even new apps are doing the same thing. I recommend starting by closing all the open apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it persists, I would next backup your device to iTunes with this article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it from your backup with the steps in the following article. These steps will erase, and re install the iOS software, so that when you restore from the back up it is not restoring on top of the previous iOS installation:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Iphone 5s calendar not accept entries after ios 7.1 update
after ios 7.1 update the iphone 5s calendar not accept entries but will accept entries from sync with outlook connection via my MS desktop outlook
So, sometimes you discover a "fix" totally by accident. I tried the following and it's worked for me 100% of the time so far. Any entries I make using this have appearded on my iPhone and on any device where I view my calendar. Hope this helps others:
Open your calendar and then view it in the "month view";
Tap the hybrid view icon which is at the top to the left of the search icon at the top right of the screen; you'l see a list of the days activities at the the bottom of the screen.
Now, tap the "+" icon at the top to the right of the search icon. This will allow you to type in the event, time, date, etc that you want to enter.
Click "done" at the top right when finished. Now, you should see the event that you just entered at the bottom of the screen under the days activities. That should "stick" even if you close the calendar, or whatever. When I checked, it also showed up as it should on other devices. You can edit events, delete them, etc--it's worked for me.
I'm not sure why this worked--or what it's the only way to be able to enter an event since the move to iOS 7.1--but it's working for me--so why ask why?? -
Macbook Pro Retina display says "No batteries available" after legitimate system software update
Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook. -
IPhone 5S trapped in recovery mode after mistake made in update process.
My iPhone 5S is trapped in recovery mode after I option-clicked "update" and selected the iOS 7.1 beta build 11D5099e ipsw, when I needed to option click "restore" before doing so. I'm really getting desperate because I have no backups of my iPhone anywhere (not icloud or computer), and cannot boot out of reecovery mode. I can put the device into DFU mode, but it makes no difference. Attempting to update the iphone to ios 7.1 from recovery mode produces error #17. Attempting to update the iphone to 7.1 from DFU mode produces error #11. Both errors are not mentioned in apple's updating and restoring support page. Before I try just clicking "restore", is there anything else that I can do? Restoring the phone is NOT an option, as I have a ton of data on it.
Please don't just say "no", because that's not very helpful. If there's truly nothing I can do, and I mean NOTHING, because I am fairly tech savy and can perform pracically any solution you give me, then I will accept that and just restore the phone.
But if there is ANYTHING I can do, tell me...
Please...
TL; DR: My iPhone 5S is trapped in recovery mode and I refuse to restore it unless it is my only option. Is there anything else I can do to fix it?Actually, I just fixed it with tinyumbrella. I thought I had already tried it when I posted this, but I guess not.
-
Cannot open gh2 rw2 files after 10.7.4 update
I'm having trouble opening Panasonic GH2 raw (.rw2) files after 10.7.4 update. I cannot view them in quick view or open them in Preview.
I verfied on a another Mac running 10.7.3 - works fine; and then immediately after 10.7.4 update it does not work.
Any remedies?I started a similar thread (before I noticed this one), and someone replied by pointing me to the helpful thread:
https://discussions.apple.com/thread/3942768?start=30&tstart=0
I tried the suggestion, and it fixed the problem for me.
You need to execute this command in the terminal (and I believe you may need to do it separately for each user on your computer):
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -R /System/Library/CoreServices/CoreTypes.bundle/Contents/Library
I'm not sure how the above command gets formatted, but make sure that it is all one command and that there are only spaces before and after the "-R"
If you want to understand what the above command does, check out the thread I linked to. -
IPhone 6plus apps stopped working after 8.1.1 update
updated my new iPhone 6 plus to 8.1.1 and the maps app won't work just crashes everytime it's opened so everything that uses a link to it eg:- find my friend, find my phone, Argos app facebook if someone puts their location on which shows the map all crash. And my safari just crashes when ever it likes. Very annoying help needed please
You have 4 basic troubleshooting options:
Restart / Reset
http://support.apple.com/en-us/HT201559
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252
If no joy, make an appointment with the genius bar for an evaluation.
Maybe you are looking for
-
I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?
-
I am trying to download a document which has an adobe symbol in the corner and all I get is a blackX
See the subject line
-
Hi Friends! In my web template I have a tabscrip with three reports, with three diferents infoproviders. I need create a 0MATERIAL drill-down , which filter the reports according this selection. How must I custiomize the drill-down? Thanks in advance
-
What is going on there (in the cloud)?
tfsprodch1su1.cloudapp.net not responding to ping - Seems down Noticed it is down as early as 06:30 this morning (2013 12 19). What is going on there (in the cloud)? I am using visualstudio 2013 (desktop App)
-
I have downloaded many songs and podcasts to my ipod. I have purchased from the I Tunes store. The other day I went to synch my ipod and I have no songs, no albums nothing................there must be an easy answer....right? HELP