Iphone 4 does not ring on incoming calls

It rang and vibrated on incoming calls it still vibrates but no ring, I don't think changed anything but im still exploring.

I have the same issue, the phone does not ring on incoming calls, moreover, when changing the tone I can't hear the new tone, and when I press the keys on the
keyboard I can't hear the clicks, if I use the headphone I can hear everything.
I checked the silent switch, it is not silent, and I restrat the phone, no help.
I have this issue immediatly after purchase and unbox
the phone is updated to 4.3.3
note: I use the same computer to sync to ipad.

Similar Messages

  • TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

    My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

    Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion.  There should be a row of icons at the top of a grey field.  if the quarter-moon icon is bright white, tap it.  If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

  • I have installed a ringtone but phone does not ring on incoming calls

    I Have an Iphone 4S, it came with vibration set as default ringtone, I changed the ringtone but the phone does not ring on incoming calls, What is wrong?

    Also, you may want to do a reboot, hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appers, so that everything is reset.

  • HT201401 My iphone would not ring with incoming calls, despite ring tone was set up?

    My iphone would not ring with incoming call despite ring tone was set up using sound setting.  In the beginning, it did ring. After a while it stops working.  Any idea to make it work again?

    Is the silent switch on the side of the iphone on?

  • My i4s phone does not ring on incoming calls.  The settings appear to be correct

    My i4s phone does not ring on incoming calls.  The settings appear to be correct for the phone to ring.
    Also, during a call, when I hit the speaker buttom, I can neither hear nor be heard by the other party
    Any suggestions?

    Try a factory restore, this might be a software problem so just plug into itunes and go and click the restore button. If this doesnt fix it then its a hardware problem meaning you need to head to an apple store for a replacement.

  • HT4515 phone does not ring during incomming call

    phone does not ring during incomming call

    Is the phone silenced? Check the button on the side of the phone above the volume buttons if you see an orange line it is silienced, slide it to the front of the phone and it should correct this.  Also ensure the volume is up.  If you've checked these and still nothing are you able to call people? do you have service?

  • Phone can dial out but does not ring on incoming calls

    We have a strange problem with a 7961G phone. It's configured the same as all of our other phones in CMM, but it can dial out but when dialing in the phone does not ring nor does the call appear to be routed to the phone. I called out from the phone to my cell and it displays the correct Caller ID information. Any ideas???

    I would check the partition that the DN on the called phone is in and the CSS of the calling phone. These are the two fundamental principles that control when a phone can call another phone.
    You might want to change the partition of the called DN to momentarily, to see that the calling phone can call it. All phones can call the partition unless there are explicit blocks put in place.

  • IPhone 4 does not ring for incoming calls

    I got the iPhone 4 two days ago, and I noticed that when someone calls me, the phone will vibrate, but it will not ring.  The volume on the ringer is set to the highest level.  I downloaded an update for the phone 2 days ago.  What can I do to get my phone to ring?  Do you think the update had anything to do with the problem?
    Thank you in advance for your help!

    Hello Dracheskind,
    Have you corrected the issue with the ringtone volume? If not, make sure the Ring/Silent button above the volume keys is turned on (if off, orange sticker will appear). Then go to settings > sounds > Ringer and Alerts > change the volume to loud. The vibrate options can stay on. If all of these settings are enabled, try changing the ringtone. 
    For additional assistance, go to http://www.apple.com/support/iphone/
    Thank you,

  • Phone does not ring with incoming call

    My iPhone 4 is not ringing -- and it's not set to silent or vibrate. I believe this may be a cell reception problem as sometimes my voicemail isn't available either. I tried turning the **** thing off and restarting it but that didn't help. I am ready to ditch the iPhone, which I love, because of its poor reception capabilities. Any other ideas out there? Help!

    That would be fine, razmee, but my carrier AT&T says it is doing the best it can do. I am in a rural area and 1 mi away from 3G service. Sometimes my reception is ok and sometimes not. In the meantime I am trying to find a work-around as I am not sure if 1: the problem is caused by poor service and 2: if it is, are there any solutions.

  • Phone does not ring on incoming calls

    Hi,
    I hope someone can help or advise on my issue - see points 3 and 4.
    1. Tested with 2 analogue phones - 1 phone definetley known to be working at a separate location - and a mobile phone.
    2. All tests conducted twice - at master socket and internal test socket/  ALL other extensions& broadband line connections removed during testing.
    3. Incoming calls do not ring on the analogue phones, but calls can be answered if analogue phone is picked up.
    4. When hanging up on an incoming call, the analogue phones do not kill the open line. I have to terminate the call on the mobile as well.
    5. Outgoing calls can be made and picked up by mobile with no issues.
    6.  Online BT Line Check reports no faults on the line.
    7. Both analogue phones were checked to make sure they are not in silent mode.
    Anyone have any ideas or suggestions?
    Thanks
    Ben

    I had this problem recently - caused by a fault in the BT line box just outside the house.
    3. If you ring your number from a mobile do you hear the phone ringing in the mobile? I my case there was just a short ring heard in the mobile and then silence - picking up analogue phone you could then talk to mobile.
    3. This is normal. Reverse cleardown takes some time - I think it is about 10 mins. I often use this feature when I pick up a call on one phone and want to move to another extension. I just replace the first phone, so no phones are connected, then go to the other extension and pick up the call.
    Peter

  • HT4528 My Iphone does not ring and all calls go to voice mail. What to do?

    I need help before I have to brave the snow and go to the apple store at Destiny USA

    No it does not work either way.
    Thanks for taking the time. I will call Verizon

  • My new iPhone 5S will not ring for incoming calls.  It vibrates. I've tried suggested tips for iPhone 4 but it doesn't work for 5S.  Please help!!

    Can anyone help.  My new iPhone 5S does not ring for incoming calls.  It vibrates.  How can I get ringer to work?

    Hello lyngos,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS2802
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    Best of luck,
    Mario

  • HT201401 my phone only vibrates and will not ring on incoming calls.  How do I fix this?

    My phone only vibrates and does not ring on incoming calls.  How do I get the audible ring?  John

    on left side of your phone you have volume controll an right above that is a small button an if you see a orange or red dot you are in silent mode flip the switch up an it will remove silent .

  • My iPhone does not ring after 8.2 upgrade and sound gone on iPad

    the sound as gone on my iPad and the iPhone does not ring when i get a call all after the 8.2 upgrade

    Hi pr1uk,
    It appears your devices are experiencing audio issues. The following article provides steps which may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Iphone 3GS not ringing/vibrating when called.

    Hello,
    When I call my Iphone 3GS with another phone (while in sleep mode) , the Iphone does not ring nor vibrates.
    However, when I push the home button while the call is comming in, the Iphone awakens and starts ringing and vibrating.
    If the home button is not pressed the Iphone remains completely silent.
    When I restart the Iphone it works perfectly for a few times and then shows the same problematic behaviour again.
    I've updated the OS to the latest version, restored the Iphone a few times, nothing helps.
    I found someone with the same problem saying that it is a battery related problem, so I've changed the battery and it didn't solve the problem.
    The problem also persists after changing to a different opperator. (I didn't switch operators to solve this problem, it had other reasons, but does excludes it as a possible solution)
    To me it seems like a software problem. Anyone any ideas on how to fix this?
    Thanks
    Jonathan

    Check:

Maybe you are looking for

  • Host('sqlldr') is not working in oracle forms 10g

    oracle database version:10.1.2.0 oracle forms version:10g client ans server are on the same machine. when i am trying to load the file in to oracle,i wrote the when-button-pressed trigger as host('sqlldr'); when i run the form its not giving any resu

  • XMLBeans 2.0 and WebLogic 8.1.4 compatibility issues

    I am on a project that is required to use WebLogic 8.1.4. We would like to use some new features in XMLBeans 2.0. We are concerned that if we replace the 1.0 library with the 2.0 library in server/lib, will the server have any problems. Has anyone he

  • To upload bulk data through FI transation F-02

    Hey All, The requirement here is to upload bulk data through FI transation F-02. Using a BDC for the data upload is not suggested for this transaction as the Screen Sequence changes as per the values of the Posting Key ( and in some rare cases accord

  • Someone have an apps to do list can be sync with Outlook ?

    I use a Palm before to get an iPod touch and I miss the to do list with alarm I've before. I don't find an apps free can do this for now can be sync too with Outlook whitout register to a website or something like this. Also, I want to categorise my

  • How can i connect skype acount with my web

    i need add skype chat button on my web as support. How can i do? This is my web: http://xn--blogthsn-sec2106e.vn/