IPhone 4 - Error 9 during Restore

Hi there,
I'm trying to Restore the iPhone but Error 9 keeps popping up. The iPhone is literally a dud now just stuck on the screen with the cable and iTunes symbol.
I've tried doing the Restore on a 13" MB Pro, iMac and Windows Vista 64 bit, all bringing up the same error. I am running iTunes 9.2.1 on all machines.
Any advice or info appreciated.
Thanks.

i agree mate the restore should fix the problem but guess what, it forces itunes to do the update. SO update is faulty and restores forces the update see the problem
Does the iPhone come with a warranty?
All iPhones, including reconditioned models, come with a 1 year limited Manufacturers warranty. If your iPhone experiences technical issues within a year of purchase, then the product can be returned to the point of purchase with a valid till receipt or other proof or purchase to enable repair, replacement or refund as appropriate. If you buy online, the easiest way to organise a repair or exchange is via Apple online, alternatively contact customer services.

Similar Messages

TS3694 I cannot update my iPhone 3g to iOS 4.2.1 because of iTunes error 1015 ;error during restoring of firmware mode.

I cannot update my iPhone 3g to iOS 4.2.1 because of iTunes error 1015 ;error during restoring of firmware mode.

Was you iPhone jailbroken?

Was updating iPad to iOS 5. Received unknown error during restore. Didn't sync. Appears to be wiped out. Can anyone help? Thanks!

Was updating iPad to iOS 5. Got unknown error during restore. Now it appears to be wiped out. Screen just asks to be plugged into iTunes, which doesn't recognize thx iPad. Have rebooted both. Please help! Thanks.

See if anything on this page helps : http://support.apple.com/kb/ht4097 - it covers update and restore problems

Phone error during restore

Hello,
Today my phone got stuck on "Searching for Signal." After talking with Verizon, I decided to do a restore. It took several tries to get it to go, and now it keeps getting an error 1669 during "Restoring iPhone firmware." I haven't dropped it anytime recently and have an otterbox on it.

Has your phone been jailbroken before you tried to restore? If yes, this is the cause for this error number.

Error during restore/recovery and 'open resetlogs'

Hello forum. I'm attempting to restore a database to a new host and have run into an error during the opening of the database (with resetlogs). The renaming of the datafiles, restore, switching of datafiles, and recovery are all done by an rman script, the contents of which are below:
# Restore production database to DR site using file system
# instead of ASM
run {
set newname for datafile 1 to '/opt/oracle/product/10gR2/oradata/DB01/system.dbf';
set newname for datafile 2 to '/opt/oracle/product/10gR2/oradata/DB01/undotbs1.dbf';
set newname for datafile 3 to '/opt/oracle/product/10gR2/oradata/DB01/sysaux.dbf';
set newname for datafile 4 to '/opt/oracle/product/10gR2/oradata/DB01/users.dbf';
set newname for datafile 5 to '/opt/oracle/product/10gR2/oradata/DB01/undotbs2.dbf';
set newname for datafile 6 to '/opt/oracle/product/10gR2/oradata/DB01/file1.dbf';
set newname for datafile 7 to '/opt/oracle/product/10gR2/oradata/DB01/file2.dbf';
restore database;
switch datafile all;
recover database;
I get the following output:
RMAN> @/home/oracle/scripts/rman_dr.rman
RMAN> # Restore production database to DR site using file system
2> # instead of ASM
3> #
4> run {
5> set newname for datafile 1 to '/opt/oracle/product/10gR2/oradata/DB01/system.dbf';
6> set newname for datafile 2 to '/opt/oracle/product/10gR2/oradata/DB01/undotbs1.dbf';
7> set newname for datafile 3 to '/opt/oracle/product/10gR2/oradata/DB01/sysaux.dbf';
8> set newname for datafile 4 to '/opt/oracle/product/10gR2/oradata/DB01/users.dbf';
9> set newname for datafile 5 to '/opt/oracle/product/10gR2/oradata/DB01/undotbs2.dbf';
10> set newname for datafile 6 to '/opt/oracle/product/10gR2/oradata/DB01/file1.dbf';
11> set newname for datafile 7 to '/opt/oracle/product/10gR2/oradata/DB01/file2.dbf';
12>
13> restore database;
14> switch datafile all;
15> recover database;
16> }
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 03-JAN-08
Starting implicit crosscheck backup at 03-JAN-08
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 651 objects
Finished implicit crosscheck backup at 03-JAN-08
Starting implicit crosscheck copy at 03-JAN-08
using channel ORA_DISK_1
Crosschecked 1 objects
Finished implicit crosscheck copy at 03-JAN-08
searching for all files in the recovery area
cataloging files...
no files cataloged
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /opt/oracle/product/10gR2/oradata/DB01/system.dbf
restoring datafile 00002 to /opt/oracle/product/10gR2/oradata/DB01/undotbs1.dbf
restoring datafile 00003 to /opt/oracle/product/10gR2/oradata/DB01/sysaux.dbf
restoring datafile 00004 to /opt/oracle/product/10gR2/oradata/DB01/users.dbf
restoring datafile 00005 to /opt/oracle/product/10gR2/oradata/DB01/undotbs2.dbf
restoring datafile 00006 to /opt/oracle/product/10gR2/oradata/DB01/file1.dbf
restoring datafile 00007 to /opt/oracle/product/10gR2/oradata/DB01/file2.dbfchannel ORA_DISK_1: reading from backup piece /ocfs2/remitpro/oracleBackups/tmp/rman_LV0_DB01.642899284.1.1.bus
channel ORA_DISK_1: restored backup piece 1
piece handle=/ocfs2/remitpro/oracleBackups/tmp/rman_LV0_DB01.642899284.1.1.bus tag=20080101_LV0_DB
channel ORA_DISK_1: restore complete, elapsed time: 01:22:28
Finished restore at 03-JAN-08
datafile 1 switched to datafile copy
input datafile copy recid=14 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/system.dbf
datafile 2 switched to datafile copy
input datafile copy recid=15 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/undotbs1.dbf
datafile 3 switched to datafile copy
input datafile copy recid=16 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/sysaux.dbf
datafile 4 switched to datafile copy
input datafile copy recid=17 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/users.dbf
datafile 5 switched to datafile copy
input datafile copy recid=18 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/undotbs2.dbf
datafile 6 switched to datafile copy
input datafile copy recid=19 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/file1.dbf
datafile 7 switched to datafile copy
input datafile copy recid=20 stamp=643049225 filename=/opt/oracle/product/10gR2/oradata/DB01/file2.dbf
Starting recover at 03-JAN-08
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=2 sequence=1005
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=1365
channel ORA_DISK_1: reading from backup piece /ocfs2/remitpro/oracleBackups/tmp/rman_LV0_DB01.642900444.1.1.bus
channel ORA_DISK_1: restored backup piece 1
piece handle=/ocfs2/remitpro/oracleBackups/tmp/rman_LV0_DB01.642900444.1.1.bus tag=20080101_LV0_DB
channel ORA_DISK_1: restore complete, elapsed time: 00:00:05
archive log filename=/opt/oracle/product/10gR2/db/flash_recovery_area/DB01/archivelog/2008_01_03/o1_mf_1_1365_3qtshnfv_.arc thread=1 sequence=1365
archive log filename=/opt/oracle/product/10gR2/db/flash_recovery_area/DB01/archivelog/2008_01_03/o1_mf_2_1005_3qtshncz_.arc thread=2 sequence=1005
channel default: deleting archive log(s)
archive log filename=/opt/oracle/product/10gR2/db/flash_recovery_area/DB01/archivelog/2008_01_03/o1_mf_1_1365_3qtshnfv_.arc recid=2418 stamp=643049236
unable to find archive log
archive log thread=1 sequence=1366
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/03/2008 16:47:22
RMAN-06054: media recovery requesting unknown log: thread 1 seq 1366 lowscn 181804603
RMAN> **end-of-file**
I searched for a decription of the 06054 error, and found that if the archive logs weren't available, then to run "alter database open resetlogs;", which I did. Here's the output:
RMAN> alter database open resetlogs;
database opened
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
ORACLE error from target database:
ORA-06553: PLS-801: internal error [56319]
I've done all of this twice now, with the same result. I've googled PLS-801 and found more than a few instances of people getting this code, but not during a database open after a restore. Can anyone shed some light on what might have gone wrong? In the interest of brevity, I left out the rest of the restore process prior to running the database restore, but other than setting "compatible" and "db_recovery_file_dest_size", it was all by the book.
Thanks in advance.

Thanks for the reply Pierre.
I am not using RMAN Duplicate. Yes, the source of the backup is an RAC. The destination is a single server, with the DB on the filesystem. Here's an overview of of the commands I ran and the procedure.
Copied tar'd backup controlfile and datafiles to destination machine. Untar'd. Install 10.2.0.1.0 on destination machine, patch to 10.2.0.2.0.
OS> sqlplus /nologin
SQL> alter system set compatible = '10.2.0.2.0' scope=spfile;
SQL> alter system set db_recovery_dest_file_size = '8g'; scope spfile;
SQL> shutdown immediate;
SQL> startup; (to verify changes took...)
SQL> shutdown immediate;
OS> Copy control file from untar'd dir and place in $ORACLE_HOME/dbs/, truncate name to c-DBID-date-00.
OS> rman target /
RMAN> startup nomount;
RMAN> set dbid <dbid from control file>;
RMAN> restore controlfile from autobackup; (finds control file with no problem...)
RMAN> alter database mount;
RMAN> @/home/oracle/rman_dr.rman (script cited in first post, to rename datafiles from ASM to filesystem, restore, switch files, and recover...)
RMAN> alter database open resetlogs; (as cited before...)
If I'm not using Duplicate and not specifying dates, the UNTIL/SET UNTIL commands aren't necessary, correct?

IPhone crashes during restore

I have an iPhone 5s, bought 14 months ago (without Apple Care, so out of warranty).
Background Information:
Since I updated to iOS 8.1.1, my iPhone has been crashing infrequently, in: Blue screen, Apple logo, back to blue screen, Apple logo, etc. This would solve itself after an hour or two (sometimes more), and the phone would then be useable again.
However, even though it would take a long time sometimes, eventually the phone would crash again. I went to my local Apple Premium Reseller (iCentre Delft, the Netherlands), and they said I should restore the phone via iTunes. I did and it worked fine for approximately 5 days. But then, this morning, it crashed again. Same thing as before. But this time it DID NOT go back to usable, and I decided to try and hook it up to iTunes again. It wasn't recognized, however, and therefore I could not restore my phone. I called Apple Support, and they said I should put the phone into recovery (DFU) mode. I did, and it clearly shows the iTunes logo with the lightning cable. But now comes the problem:
The problem:
When I connect to iTunes, I get the normal messages requesting me to reset the phone (2). It starts just fine, but when the first white appears on the bar on the iPhone, it gets stuck (while the bar in iTunes keeps moving). 10 seconds later, and the blue screen pops up again, after which it heads back to the basic recovery mode screen. On iTunes I get error 9, which shows USB connection issues. However, I doubt that this is the case and suspect that it gives this error because it has nothing else to give.
Does anybody have any suggestions?

HEy dear,
for take your device to recovery mode you have to hold home and power then release the power and hold the home for 10 second. Then the iTunes will apear.
BUt for DFU mode you have to hold the home button until the itunes recognize your device and be availabe on your iTunes but there wont be any iTunes logo on your iPhone screen everything will be black on your iPhone. Try restoring your iPhone in DFU mode.

Error During restoring a database through RMAN in Oracle 9i

Hi all,
I have taken a full backup in oracle 9i through RMAN in one server(Solaris).
After that moved that backupset to another server. Server Locations are same. I need to restore the backup in the new server.
I am using pfile.
Steps I followed:
1. Using pfile i have started the db in nomount.
2. Then restored the controlfile from backup and mounted the database.
3. then tried to restore the database - I have to restore three of my datafiles to different location, hence i used "set new name "
But RMAN threw an error while restoring.
RMAN-00558:
RMAN-01009:
File not found.
Can anyone help to resolve this error.
Thanks in Advance.

Hi,
Thanks, but I took the backup of the database using the command:
backup database;Only this command i issued.
In the new server, I tried to list the backup using list backup command by putting the db in mount stage.
I m not able to view the backup information.
Is there any command to register the backup information using the catalog?
-

HT1212 Error during Restore

The error message about the password & locked ipad reappears during the restore process. Will the restore still be successful?

Are you using the same computer to restore the ipad that you used to sync the ipad the last time?
If not, you'll have to restore to factory settings
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding Passcodes

IPhone unplugged during Restore Process, PLEASE HELP Restore!

Hi guys,
I was Restoring my original iPhone through iTunes and during this process my brother unplugged
the iphone from iTunes.
Now, I've been trying to restore again but the iTunes has prompted a little window that says
"Waiting for iPhone". I left it plugged in all night with iTunes on my Mac but it's stuck on that same
message.
Can someone please help me with this issue?
Thanks so much,
Z

Try placing your iPhone in recovery mode.
Turn off your iPhone by holding the "Sleep/Wake" button for about five seconds and then sliding the red slider. If your iPhone is already off, there's no need to turn it on and then off again.
Once it's turned off, press and hold the "Home" button and plug the iPhone into your Mac.Keep holding the "Home" button until you see a dock cable pointing to the iTunes icon. iPhones running older software will display a yellow triangle and text which says "Please Connect to iTunes". You can now release the Home button.
Open iTunes (if it's not already open) and you will be told that "iTunes has detected an iPhone in recovery mode". Click "OK" and you will be taken to the iPhone pane. Click restore.

Iphone froze during restore

Hey, just got my Iphone 4 replaced today at the apple store, the home button was acting odd. Anyway, I plugged it in to restore from my backup, started the restore, and half way through it stopped and gave me an error message saying to restore the phone before updating it, so I hit the restore button. It stopped that with an error message too, and my phone disappeared from itunes. I unplugged it and plugged it back in, waiting for a couple minutes. It didn't show up so I unplugged it again, right as I did it finally showed up, but I had already disconnected it. The screen turned all white at first, then faded to all black. Now I have a black screen that is lit up, so it's on, but it won't respond to anything. Tried shutting off, plugging in, restoring, dfu mode... won't show up in itunes or respond to anything. Do I have to bring it back to the store and get another new one? I've literally had it for like 4 hours. Better off letting it die so it shuts off or charging it? Really frustrated right now, need my phone at work.

Hi ShanaB, could you tell me what version firmware came on the iphone? I'm having trouble also but don't want to lose the unlock. ty

HT201210 iPhone freezing during restore.....

My iPhone 4 keeps freezing about 60% way through a restore, according to iTunes when the firmware is being updated. Any ideas how to fix? I have tried a different computer, disabling my security software etc. and still no luck :o( (Windows)

I was doing exactly what you suggested for hours prior to posting my question. I tried restoring, I tried restore/update over and over and it would always freeze between 25-75% through. I restarted my laptop 20 times, uninstalled and reinstalled itunes 4 times. Finally, today I was so frustrated that when I saw it freeze up one more time, I just pulled the power cord out of my laptop and walked away. An hour later I booted back up and set it to restore before I left the room and ....magic, it finally worked. Whether the unplug event had any real connection, I don't know.
If anyone does freeze during an update and has the "connect to itunes screen with the red itunes logo" stuck on their iphone screen, modular 747 is correct. Just keep trying the restore/update through itunes, but be prepared to do it non-stop for almost 72 hours like I did.

HT201269 Iphone disconnected during restore.

I just received a new iphone. I went to restore the phone using itunes. During this time my phone disconnected.
I reconnected it and now it is recognised as my phone in itunes and says 'your iphone is up to date' etc, yet my phone is still on the start up screen.
Im not sure whether to click 'restore' again in risk of loosing all my photos etc?

Yours will be a bit different because we can't force the phone to restart by holding both buttons.
You can try and put it into 'recovery mode' which is slightly different from 'DFU mode'
Try the following:
1) Let the battery run out
2) Plug the phone in (so it powers on), do not have the phone connected to a computer as this will try something else
3) As soon as the screen comes on press and hold the home button (make take 30 seconds)
4) Wait for it to pop up with a symbol showing to connect to iTunes
5) Try to restore in iTunes
-Dib.

-50 unknown error during restore after download of 1.11

My unhacked I Phone gives me unknown error -50 during download and restore of new software. The phone has gone nuts. No hacks on phone. Travelling outside of the USA I cannot get service. Any suggestions?

ok

TS3694 my Iphone5s prompts 4005 error during restore .

I was working on my Iphone5s when the battery charge was almost 10%, suddenly everything went off and screen got dark and apple logo appeared.
I recovered my Iphone as decribed on Apple support services.then I tried to restore it. But I could not make it and each time I got Error 4005 . Ihave done all the basic trouble shooting .
please help me what to do . in my living area no apple service is available

Has your phone been jailbroken before you tried to restore? If yes, this is the cause for this error number.

Error during Restore Database

Hello everyone!
First of all, i'm sorry for posting another restore problem, but i read all threads related and i still have my problem.
I have a fresh new install of oracleXE, but when i try to restore de database from a backup store in other disk install in the same computer, using the restore database option include with the application, the program show me these steps:
STEP 1:
This operation will shut down and restore the database. Are you sure [Y/N]?
I write 'Y'.
STEP 2:
This operation will shut down and restore the database. Are you sure [Y/N]?y
Restore in progress...
El servicio solicitado ya ha sido iniciado.
Puede obtener más ayuda con el comando NET HELPMSG 2182.
Recovery Manager : Release 10.2.0.1.0 - Production on Vie Ago 31 10:20:45 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
conectado a la base de datos destino: XE (DBID=2513092923)
RMAN> set echo on;
2> startup nomount pfile=C:\DOCUME~1\imgltda\CONFIG~1\Temp\rman_dummy.ora force;
3>
echo activado
instancia Oracle iniciada
Total del ┴rea Global del Sistema 285212672 bytes
Fixed Size 1287016 bytes
Variable Size 92277912 bytes
Database Buffers 188743680 bytes
Redo Buffers 2904064 bytes
Recovery Manager terminado.
Enter the flash recovery area location:
I write this in my flash recovery area, where i have the backup files: D:\Respaldo.
In this path i have de following folders: D:\Respaldo\XE; Inside this folder i have other folders: ARCHIVELOG, AUTOBACKUP, BACKUPSET, ONLINELOG.
STEP 3 This is my problem:
MAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: fallo del comando startup en 08/31/2007 10:24:10
RMAN-04014: fallo al iniciar: ORA-01261: Parameter db_recovery_file_dest destina
tion string cannot be translated
ORA-01263: Name given for file destination directory is invalid
OSD-04018: No se ha podido acceder al directorio o dispositivo especificado.
O/S-Error: (OS 21) El dispositivo no est┐ listo.
Recovery Manager terminado.
==================== ERROR =============================
Restore of the database failed.
RMAN Error - See log for error .
Log file is at C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\OX
E_RESTORE.LOG.
==================== ERROR =============================
Presione una tecla para continuar . . .
The OXE_RESTORE file show me this:
Recovery Manager : Release 10.2.0.1.0 - Production on Vie Ago 31 10:23:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1652M/2021M, Ph+PgF:3435M/3914M, VA:2003M/2047M
Starting with debugging turned off
conectado a la base de datos destino: xe (no montada)
RMAN> set echo on;
2> restore (spfile from autobackup db_recovery_file_dest='D:\Respaldo');
3> startup nomount force;
4> restore (controlfile from autobackup);
5> alter database mount;
6> configure controlfile autobackup off;
7> restore database;
8>
echo activado
Iniciando restore en 31/08/07
se utiliza el archivo de control de la base de datos destino en lugar del catálogo de recuperación
canal asignado: ORA_DISK_1
canal ORA_DISK_1: sid=37 devtype=DISK
destino del área de recuperación: D:\Respaldo
nombre de base de datos (o nombre único de base de datos) utilizado para la búsqueda: XE
canal ORA_DISK_1: se ha encontrado una copia de seguridad automática en el área de recuperación
canal ORA_DISK_1: se ha encontrado la copia de seguridad automática: D:\RESPALDO\XE\AUTOBACKUP\2007_08_27\O1_MF_S_631711029_3F5TQOVT_.BKP
canal ORA_DISK_1: restauración de SPFILE a partir de la copia de seguridad automática terminada
restore terminado en 31/08/07
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: fallo del comando startup en 08/31/2007 10:24:10
RMAN-04014: fallo al iniciar: ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated
ORA-01263: Name given for file destination directory is invalid
OSD-04018: No se ha podido acceder al directorio o dispositivo especificado.
O/S-Error: (OS 21) El dispositivo no est¿ listo.
Recovery Manager terminado.
I really do not know what is my problem and how to solve it. I hope you guys can help me. I'm under a big pressure to solve this soon.
My Operating System is: WinXP Pro
I'm using APEX 2.01
When I create the backup I use ARCHIVELOG enable
Things i try:
1. Install fresh oracle XE database, and restore
2. Install fresh oracle XE database, enable archivelog and restore
3. Install fresh oracle XE database, enable archivelog, change path of DB_RECOVERY_FILE_DEST to 'D:\Respaldo'.
4. Install fresh oracle XE database, enable archivelog, change path of DB_RECOVERY_FILE_DEST to 'D:\Respaldo', and execute: @?/sqlplus/admin/movelogs;
5. Install fresh oracle XE database, enable archivelog, change path of DB_RECOVERY_FILE_DEST to 'D:\Respaldo';, and change DB_RECOVERY_FILE_DEST_SIZE to 20G;
NOTE: sorry for my english it is not my native language. and sorry for using a spanish version of the database.
Message was edited by:
Minning

Well,
After a lot of reading, i try this using rman:
SQL
1. SQL> connect xx/xx as sysdba
2. SQL> shutdown immediate
RMAN
1. RMAN> connect target XE
2. RMAN> startup nomount;
3. RMAN> restore spfile to 'C:\xe.ora' from 'D:\Respaldo\XE\AUTOBACKUP\2007_08_27\O
1_MF_S_631711029_3F5TQOVT_.BKP';
4. RMAN> alter database mount;
5. RMAN> restore database;
in point n°5 i have the following problem:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: fallo del comando restore en 09/06/2007 16:27:09
RMAN-06026: no se han encontrado algunos destinos - abortando la restauraci¾n
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 4 para restaurar
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 3 para restaurar
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 2 para restaurar
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 1 para restaurar
I try this command to find what's going on:
RMAN> list backup;
with this result:
Lista de Juegos de Copias de Seguridad
===================
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
15 Full 736.04M DISK 00:00:19 24/08/07
Clave BP: 15 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T12
4938
Nombre de Parte: E:\RESPALDO\XE\BACKUPSET\2007_08_24\O1_MF_NNNDF_TAG2007
0824T124938_3DY3143F_.BKP
Lista de Archivos de Datos en el juego de copias de seguridad 15
Tipo de Archivo LV SCN Pto. Ctrl. Hora de Punto de Control Nombre
1 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSTEM
.DBF
2 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\UNDO.D
BF
3 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSAUX
.DBF
4 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\USERS.
DBF
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
16 Full 6.83M DISK 00:00:01 24/08/07
Clave BP: 16 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T12
5005
Nombre de Parte: E:\RESPALDO\XE\AUTOBACKUP\2007_08_24\O1_MF_S_631457405_
3DY31Y0H_.BKP
Archivo de Control Incluido: SCN de Punto de Control: 2747446 Hora de Pun
to de Control: 24/08/07
SPFILE Incluido: Hora de Modificaci¾n: 24/08/07
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
17 Full 736.04M DISK 00:00:20 24/08/07
Clave BP: 17 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T17
0028
Nombre de Parte: E:\RESPALDO\XE\BACKUPSET\2007_08_24\O1_MF_NNNDF_TAG2007
0824T170028_3DYKQGTC_.BKP
Lista de Archivos de Datos en el juego de copias de seguridad 17
Tipo de Archivo LV SCN Pto. Ctrl. Hora de Punto de Control Nombre
1 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSTEM
.DBF
2 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\UNDO.D
BF
3 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSAUX
.DBF
4 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\USERS.
DBF
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
18 Full 6.83M DISK 00:00:02 24/08/07
Clave BP: 18 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T17
0054
Nombre de Parte: E:\RESPALDO\XE\AUTOBACKUP\2007_08_24\O1_MF_S_631472454_
3DYKR7OZ_.BKP
Archivo de Control Incluido: SCN de Punto de Control: 2773741 Hora de Pun
to de Control: 24/08/07
SPFILE Incluido: Hora de Modificaci¾n: 24/08/07
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
19 Full 740.95M DISK 00:00:20 27/08/07
Clave BP: 19 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070827T11
1642
Nombre de Parte: E:\RESPALDO\XE\BACKUPSET\2007_08_27\O1_MF_NNNDF_TAG2007
0827T111642_3F5TPWHN_.BKP
Lista de Archivos de Datos en el juego de copias de seguridad 19
Tipo de Archivo LV SCN Pto. Ctrl. Hora de Punto de Control Nombre
1 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\SYSTEM
.DBF
2 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\UNDO.D
BF
3 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\SYSAUX
.DBF
4 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\USERS.
DBF
Where it says 'Estado' (Status in english) I found this: 'EXPIRED', it seems that my 4 dbf files have some problem, right now i'm looking for a way to solve this, but with no luck.
I think i need a little help again...

IPhone crashes during restoring. What should I do?

I was busy restoring my iphone 3G but I had no idea that iTunes will demand that your sim-card that was in the iPhone at the first you bought it. And unfortunately I have lost this sim-card, so my phone is kind of dead right now.

iTunes is responsible for making sure your phone gets activated properly, and therefore needs the sim card. You can take the phone to AT&T and give them your account information. They will give you a brand new sim for the device. Then try to restore with the SIM in. Should work fine after this.

IPhone 4 - Error 9 during Restore

Similar Messages

Maybe you are looking for