IPhone 4 Error while updating to 4.2.1

Hi,
I just updated to 4.2.1 and its finishing, restarting and giving me error 1013.
I've tried restoring and still the same error (1013)
what should i do ?
please help.
Sincerely,
Omri,
Israel.

Error 1013 is a hardware failure. You will not be able to update or restore your phone if, in fact, it has suffered a hardware failure. To verify, try restoring on a different computer. If you get the same error, this would tend to confirm a hardware failure. The phone comes with a one year warranty, so make an appointment at an Apple store or contact whoever handles warranty issues where you live.

Similar Messages

  • IPhone 4 error while updating to iOS 5 - An error occurred while restoring this iPhone (-35).

    After taking over an hour to backup and restore my iPhone to iOS 5 iTunes gave me that error:
    An error occurred while restoring this iPhone (-35).
    Anyone know what this is?
    None of my apps have been restored, or settings.

    Try it again. Or un plug and try again.
    Sometimes I have found if the server is busy it will not verify the phone and you start to loose things. If a back up was done before upgrade you will not have lost stuff.

  • HT2693 I am getting an 1015 error while updating Iphone 3G with latest iTunes pls help me to restore iPhone 3G

    I am getting an 1015 error while updating Iphone 3G with latest iTunes pls help me to restore iPhone 3G

    Try this and see if this helps http://support.apple.com/kb/TS3694#error1015

  • Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

    Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
    Or any other suggestions please? Thanks

    As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

  • My 5s showed an error while updating to ios 8.1 and it has hanged and its not turning on

    my 5s showed an error while updating to ios 8.1 and it has hanged and its not turning on

    Did you click on the link just below that that says:
    iOS: Device not recognized in iTunes for OS X
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    You have to read the entire support article and follow the subsequent links if the first solutions do not resolve the issue....
    GB

  • Hi, i just try to update my 3g in itunes unfortunatly it got error while updating it asked me to restore update but unable to restore it , now my 3g i locked and on screen it displying usb symbol connect to itunes ,please help me regarding this

    hi, i just try to update my 3g in itunes unfortunatly it got error while updating it asked me to restore update but unable to restore it , now my 3g i locked and on screen it displying usb symbol connect to itunes ,please help me regarding this

    I suspect your error was 1015, not 1051. This usually involves a jailbroken iPhone, use Google to find your solution.

  • Error while updating a plan

    Hi,
    I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
    "Maximum Number of Result Blocks has been reached"
    Maximum number of Result Blocks has been reached.
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0xD4]
    Error while processing the data for the step 'Grid'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Maximum number of Result Blocks has been reached.
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0xD4]
    Error while processing the data for the step 'Grid'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
    [Oracle BAM Enterprise Link error code:  PlanMgr -- 0x1, PlanMgr -- 0xD5]
    The data updation stops after the row count 49900.
    Please help to resolve this error .
    Thanks in advance.
    Regards,
    Lathika

    Hi,
    in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
    BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
    This may help searching the web.
    Greetz,
    GOI

  • Error while updating to iOS 6.1.2

    Error while updating software to iOS 6.1.2

    what is the error? if you want help you need to provide some details.

  • Error While updating info in the People Form-Additional Personla Details

    Hi All,
    Iam getting an Error While updating information in the People Form,Additional Personla Details DFF.
    Error Like:
    APP-PER-289974:There has been an error Processing this person,The error encountered is 'ORA-20001:HZ_STNC_SQL_EXCEP:N,PROC.sync_Person,N,ERROR.ORA-25153:Temporary Tablespace is empty ,N,POO,1265890',which occured in procedure  per_htrca_merge_tca_person at step10.
    Please contact your support represntative.
    Thanks -
    Sowmya

    Thanks you,
    By this Note id:395136.1
    Iam unable to find this Set profile 'HZ: Generate Events for DQM Real-Time Synchronization' to No
    with this Note id:278422.1
    We are unable to find this proifle option : HZ: Data Sharing and Security Enabled profile
    we are using applications 11i.
    please help to find this Profile option.
    But with this note id:ID 395136.1
    This is Working.
    Query for HZ: DQM Synchronization Method profile. Set the value to Disable.
    But iam facing proble while uploding data to DFF ,Error--SQL exception occurred during PL/SQL upload.
    Thanks for the Support-
    Sowmya.
    Edited by: user13419037 on Aug 11, 2011 11:53 PM
    Edited by: user13419037 on Aug 12, 2011 12:03 AM
    Edited by: user13419037 on Aug 12, 2011 3:45 AM

  • Error while updating the content in workflow

    Hi,
    I'm getting an error while updating the content in workflow thru the checkout option. i.e. contributor checks in the content - reviewer rejects the content - then contributor checks out and modifies the content as per the reviewer's remarks and while checking in the following error occurs
    Content Server Request Failed
    Unable to check in content item 'HO000128' for workflow. Unable to execute service method 'checkInUpdateRevByID'. (System Error: Runtime error: java.lang.NullPointerException
    at intradoc.server.DocServiceHandler.checkInRevByID(DocServiceHandler.java:248)
    at intradoc.server.DocServiceHandler.checkInUpdateRevByID(DocServiceHandler.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.DocServiceHandler.determineWorkflowCheckin(DocServiceHandler.java:3833)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.Service.doSubService(Service.java:3465)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
    at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
    at intradoc.server.Service.doCodeEx(Service.java:507)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
    at intradoc.server.Service.executeActions(Service.java:433)
    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
    at intradoc.server.Service.doRequest(Service.java:1707)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
    at intradoc.server.IdcServerThread.run(IdcServerThread.java:197))
    Please help to resolve.
    Thanks in advance
    Prasad

    I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
    Content Server Request Failed
    Unable to update the content item information for 'HO000128'.
    The content ID must be specified.
    Please help to resolve.
    Thanks in advance
    Prasad

  • Error while updating my WP

    Hi, I have got an error while updating my WP on lumia 800? the error code is 80070002. how to resole

    @RoukailaRedouane
    Similar issue raised here with referral to resource below:http://answers.microsoft.com/en-us/winphone/forum/wp7-sync/error-80070002-occurred-when-checking-upd...
    More information can be found here:http://support.microsoft.com/kb/910336/en-us
    Happy to have helped forum with a Support Ratio = 42.5

  • Error while updating phone button template in CUCM 8.6

    Experts,
    I'm getting following error while updating phone button template in CUCM 8.6;
    Update failed. java.sql.SQLException: System catalog (sysprocbody) corrupted.
    Please check the screen shot attached here with.
    What could be the reason?
    Thanks
    Vivek

    I'm not a Cisco employee, so I can't do anything with your backup.!
    You need to take a backup as a precaution (You should have been doing this anyway) Then you need to call Cisco TAC to get the underlying problem fixed. CalManager is a locked-down environment, and only TAC can get the low-level access needed to fix database problems.
    GTG

  • Error while updating decimal places in general settings

    Hii All
             I have got an error while updating Decimal places in General Settings
    Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
    Note : there are no postings yet, a fresh database for a new client
             what could be the possible reason
                                                                 thanks
                                                                         RIYAZ

    Hiii All
          As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
              would be helpfull if there is any other way..
                                                Thanks
                                                         RIYAZ

  • Error while updating patch level 11 of HR

    Dear All,
    I am getting following error while updating HR patch level 11.
    Phase OBJECTS_LOCKED_?: Objects Locked in Requests
    Request      Names of Locked Transport Objects
    MRDK900089   LIMU REPS H99_POST_PAYMENT
                 LIMU REPS RPCIPE00
    MRDK900542   R3TR FORM HR_IN_TAXF16000Y
    the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
    Object messages: R3TR CINS 01200615322 0000824666
    Transport objects from package PCPO to target MRP only
    Object messages: R3TR NOTE 0000970953
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU REPS H99_POST_PAYMENT
    Transport objects from package PCPO to target MRP only
    Please help me how to rectify.
    Thanks n regards
    Bhaskar

    Hello Bhaskar,
    is the transport already approved?
    If not approve it and try it again. (also it is a local one)
    If not check the objects and unlock them manually the following way:
    SE03 => Unlock Objects (Expert Tool)
    But if you approve your transport... the objects should be unlocked.
    Regards
    Stefan

  • Error while updating data from PSA to ODS

    Hi Sap Gurus,
    I am facing the error while updating data from PSA to ODS in BI 7.0
    The exact error message is:
    The argument 'TBD' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
    Please suggest how to proceed on this issue.
    Points will be awarded.

    Hi ,
    Try to simulate the process.That can give you exact error location.
    It seems like while updating few records may be no in the format of the field in which it is updated.
    Regards
    Rahul Bindroo

Maybe you are looking for

  • Create dynamically xml file from java.

    Hi all, I got class information in java program. I have to put method name and return type into xml. The xml file is like this and i have created this file. <method> <name></name> <returnType></returnType> </method> Now when I get method information

  • Setting proxies in PDF

    Hi All, I am not able to access external webservices from pdf within my company network. Need to set some proxies through scripting or some settings in Adobe reader. Please suggest if any links on this stuff. Regards, Ali

  • How to call MSSQL stored procedure from oracle database

    MSSQL and Oracle databases are linked thru ODBC link using Oracle HSODBC. I can query MSSQL table or view from Oracle Database using standard notation for acessing remote objects schema.object@dblink_name... Can anybody give me syntax for calling MSS

  • Website upgraded to CR2008/VS2008, reptviewer-refresh hangs with a wait msg

    Crystal Report IX.2/VS2005 website app converted to CR2008/VS2008:  compiles clean, runs, but reportviewer-refresh hangs with  "Please wait while the document is being processed" message.  Can anybody suggest a solution or hypothesis? detail: I've co

  • Analyzer has encountered a problem error

    some of our PC's are suddenly reporting an error stating - "analyzer has encountered a prblem and needs to close we are sorry for the inconvenience." The event logs have several zen errors most coming from sources listed as Novell.Zenworks.Logger, Ap