Iphone 4 failed to update software, now stuck in recovery mode?

itunes asked me to update the phone software, it downloaded on the laptop but when i looked at my phone it had the plug into itunes picture, ive held down lock and pressed the menu button but this didnt work
pleaseeee help me

Disconnect it from the computer's USB cord. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message.  http://support.apple.com/kb/HT1808
Then you can restore your phone:  http://support.apple.com/kb/HT1414

Similar Messages

  • IOS8 update failed on my iPad2, now stuck in recovery mode

    Hi there
    I am in a bit of a pickle! This is what happened:
    1.     Plugged my iPad2 into iTunes, downloaded iOS8 and it began to install;
    2.     iTunes downloaded the software and began to update iPad;
    3.     Device showed Apple Logo and progress bar BUT then update failed. iTunes informed me it failed, clicked OK. iPad stuck and did not recover;
    4.     Did a hard reset;
    5.     iPad showed Red iTunes logo and said to connect to iTunes;
    6.     Connected to iTunes which stated: iPad Recovery Mode, If you are experiencing problems with your iPad, you can restore to original settings by clicking Restore iPad
    7.     Clicked restore iPad - warnings about losing data etc...
    8.     iTune redownloaded iOS8,
    9.     After downloading iTunes went back to the iPad Recovery Mode screen,
    10.   iTunes redownloaded iOS8
    11.   goes into an infinite loop back to point 6 and round and round we go.....
    If I leave the iPad it exits recovery mode and tries to restart - but black screen after apple logo.......
    Going back into recovery mode - it does the same again.... no joy...
    I'm really stuck - thankfully have a backup, but does anyone have any suggestions?????????
    Thankyou!
    PS - iTunes, and OS Mavericks is fully up to date...

    mama.yeen wrote:
    been trying like 100s times already.. no luck… most far it goes up to restoring ipad firmware then freeze or end up with error that suggesting to update itunes bla bla… so sad..
    It's not possible to revert to a previous system. You're failing and it won't work, because it's not possible.
    If you want to give your operating system a fresh start, here's how to do it ... reset to factory default ...
    Follow this procedure for a Troubleshooting Methodology ... basically reset to factory default condition -BUT- be sure to do the following methodically and also to follow the part with Apple Support!
    First you want to make sure you have several backups of your data and done with a couple of "different" sources. Be sure to understand what data is backed up and what is NOT on iCloud Backup and iTunes Backup. Use a variety of methods for backup ... you might check into Dropbox, in addition to your Apple options.
    Then turn off your desktop anti-virus software when using iTunes for this reset to factory default. After you do that reset, then leave your iPad in its factory default state and see how it operates then. If you encounter any problems in that factory default state, then take it to Apple Support, and let them know that you have just reset it to that state with iTunes and have not put any of your data back on and it is operating in this fashion (whatever the problem is) in that pristine state. Make sure you keep that trouble ticket number, because if it has to be escalated through Apple Support, you're going to find all communications tied in with that number. If the lower level help isn't able to help you, then escalate it to a higher level to examine the problem. Keep at it with that trouble ticket number until Apple Support arrives at a solution to that problem. Be methodical and keep at it.
    On the other hand, if everything is okay with the factory default condition, then restore your backup. Some people have discovered that the problem resides in the apps or something in the restored backup. If that's the case, then it's going to be trying and difficult to find out which developer's app is causing you the problem. And ... it's true ... that a developer not following Apple's instructions and guidelines for his app can CAUSE YOU TROUBLE. This kind of thing does happen from developers, especially when a new system upgrade comes out, because some developers ignore what Apple tells them about changes coming, and what they do BREAKS SOMETHING.
    This is a troubleshooting methodology that you are going through. See it through to the end.
    Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
    https://support.apple.com/kb/HT5262
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
    http://support.apple.com/kb/ht4946
    iOS: Troubleshooting Encrypted Backups
    http://support.apple.com/kb/TS5162
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

  • My iphone 4 wont update and is stuck in recovery mode how do i get it out of it?

    My iphone4 tried updating iso7 it then told me to plug it into itunes ( it wont go off it so i cant use my phone at all) and says it needs to recover but it says error so i can what do i do

    this may help. http://support.apple.com/kb/HT1808

  • Tried to update ipod touch software now stuck in recovery loop any ideas?

    tried to update software on brand new ipod touch but now stuck in recovery mode (displaying usb plug into itunes logo) any ideas?

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Last, try restoring on another computer.

  • Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

    Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
    Or any other suggestions please? Thanks

    As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

  • HT201263 My iPhone 4 started to update but got stuck in recovery mode. I've tried everything anyone on the website has told me to do, but nothing has worked. Is there anything I can do? I need my phone

    My iPhone 4 started to update but got stuck in recovery mode. I've tried everything anyone on the website has told me to do, but nothing has worked. When you go to turn it on, it shows the Apple symbol,  then it goes to the connect to iTunes screen. When I do that, it just says error with the code 9006. I've followed what the Apple site has said to do for it, but the phone is still is the same  state. Is there anything I can do? I need my phone back as soon as possible.

    Hello Hester Emily,
    Thanks for using Apple Support Communities.
    I'm sorry to hear about the difficulties you're experiencing after this update process.  I found the following article that has more information on the iTunes error code 9006:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Take care,
    Alex H.

  • Iphone now stuck in recovery mode

    After trying to update, Iphone is now stuck in recovery mode and Itunes does not detect iphone.  This happens EVERYTIME apple does something with the OS and I would like to know to fix this and then how to avoid this in the future.

    im stuck on the white apple screen with the black loading bar and it freezes . what do?

  • I just tried downloading the latest os6 and it is now stuck in recovery mode

    i just tried downloading the lastest os and it is now stuck in recovery mode.
    Help

    Sorry I'm so late responding; I've been away.
    http://support.apple.com/kb/TS3694#error1611
    The error means that your antivirus or firewall is blocking the update process.

  • Was updating my iPhone 4 to the latest ios and now stuck in recovery mode.

    Was updating my iPhone 4 to the latest ios 5.1 (i believe) and a error message came up (didn't make a note of the error code sorry) but now phone is stuck in recovery mode with the USB wire and iTunes logo on. PC wont reconise iPhone when plug it in either. I had to delete an old back up before the update as i didn't have enough space on PC to do the update before but was told that during the update it backs up again anyway. I have looked in Device backup's and there is nothing there I have a feeling i'm going to have to restore it but hopefully there is another way as i wont be left with anything on the phone.
    Any help please.
    Many Thanks.

    Sorted it now, took it to Apple store and explained etc. was nothing could do but restore the phone. Was told to make sure itunes on PC was up-to-date version before updating iphone which could have caused the error.

  • New 5th generation ipod wont install software and is now stuck in recovery mode

    I just received a 32 GB iPod touch 5th generation for Christmas today. I installed the newest version of itunes, backed up my former iPod to the computer and then plugged in the new one to add the software and restore it from the back up. After  the 3 hours of installing the software was almost done it said an unknown error ocurred. Now my new iPod is stuck in recovery mode and won't get past restoring the iPod. I have tried to go through it several times now. I really want to get this working, but I don't know what to do anymore.

    The problem is that it stops restoring. I go throught the recovery stage to restore it and not even a quarter of the way through it comes up with the message that an unknown error has occured. Every time i connect it to iTunes it tells me that it has detected an iPod in recovery mode.

  • Attempted the new IOS4 upgrade, now stuck on Recovery Mode

    I think my problem is a little bit different than everyone else's. My phone is stuck on recovery mode, and is not being detected by itunes. Whenever I plug it in the appropriate device sound chimes in, with the "new hardware needs to be installed prompt." However, the ipod is named " Apple Mobile Device(Recovery Mode )." Any suggestions? Thank you.

    Well, had to drive over to my parent's house to use the Mac over there. Plugged in my brick of an iphone and it was reset using their itunes!! Came back to my computer, uninstalled "Apple Mobile Device" under device manager and then had to reinstall it via Add New Hardware. The phone sync'd up with my itunes and restored all of my apps and contacts, and is running 4.0. Now to see what other problems I encounter with this stupid update....

  • IPhone 4 Failed Updated to iOS 6, now stuck in Recovery Mode

    I plugged in my iPhone 4 to update it to iOS 6.  After the update was completed, it restarted and now shows only the iTunes Connect screen.  Plugging the phone in now, iTunes says that the phone must be restored.  It fails to restore every time.  I've tried like 1000x. 
    Help would be appreciated.  And please, assume I know nothing and have tried nothing.  I'm pretty desperate to get my phone restored, even if for only long enough to get some of my information saved from my device.
    Thanks.

    Disconnect it from the computer's USB cord. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message.  http://support.apple.com/kb/HT1808
    Then you can restore your phone:  http://support.apple.com/kb/HT1414

  • Tried to download latest iphone update now stuck in recovery mode.

    Tried wirelessly updating iPhone 4 with the lates update.  The initial attempt failed and gave me an error message.  On the second attempt it seemed to work until the screen showed it needed to be connected to itunes. When I did this itunes said the phone was in recovery mode and needed to be reset to factory settings.  The phone has not been backed up for a while.  Is there a way to get out of recovery mode without losing all photos and video that have not been backed up?

    Sorted it now, took it to Apple store and explained etc. was nothing could do but restore the phone. Was told to make sure itunes on PC was up-to-date version before updating iphone which could have caused the error.

  • I tried updating my iPhone 4S to IOS 6.0.1 and it is now stuck in recovery mode.

    I updated my iTunes to IOS 6.0.1 tonight and then connected my iPhone to the computer and began to back up and update it. It froze and now I am getting the "connect device to iTunes" image on my phone. When I connect it I get a notification on my computer saying the phone is in recovery mode and as soon as I agree to set it up I get an error. I do not have my phone connected to the computer currently and it keeps turning off, I turn it on and see the connect phone image and seconds later it is back to off. Any advice?

    Sorry I'm so late responding; I've been away.
    http://support.apple.com/kb/TS3694#error1611
    The error means that your antivirus or firewall is blocking the update process.

  • IOS 5 failed to install and iPhone 4 now stuck in recovery mode

    I went to update my iPhone 4 to iOS 5 last night against my better judgment. It backed up etc. fine but when it went to install iOS 5 I got a pop up message from Windows (I'm  on Windows Vista Home Premium 32-bit) saying that the drivers for Apple Mobile Device (Recovery Mode) couldn't be found. I clicked the option to locate and install them automatically, that didn't work. I did it manually and selected the drivers but that didn't work either. Any tips? At the moment basically my phone is stuck on the screen with the iTunes logo and then the USB cable underneath it with an arrow pointing up, no words on the screen other than iTunes.

    Thanks for the replies, done all of that like a million times I'll just pout until the Genius fixes it

Maybe you are looking for

  • T500 Problem with BIOS - Win7

    I have a T500 2081CTO. I took a stab this weekend putting Windows 7 on it, but I haven't gotten very far. Aside from the fact that I am only finding BETA versions of drivers for it, my biggest problem is that the latest BIOS which purportedly adds Wi

  • How do I enhance the quality of a reduced jpeg (pixels are showing)?

    I have a logo jpeg I need to reduce to a size that displays properly on a business card, letterhead, etc. I think I did this with another one of my Companies 4 or 5 years ago, but have not used Photoshop CS2 since and cannot seem to find guidance in

  • Reg: In Which Table Tax Details for the invoice are stored

    Team, Can you please help me in which table : tax information for the invoice is stored. I need the following tax : QST_PAID_AMOUNT ,GST_PAID_AMOUNT, GST_CONTRA_AMOUNT information for invoice. Thanks.

  • Java Code to trigger Custom Based Event in BO XI Release

    hi, I am new member of this community. I am very happy to be part of it. I am working in BO XI r2. I  need to schedule some reports based on custom event and I need to trigger this event externally using some java application. Is it possible to trigg

  • [AS CS3] Export JPEG options, setting, export selection

    Hi all, I am having trouble getting a JPEG export of a selected group of items to adhere to the export options I'm setting. I swear I've done the same thing with PDF export prefs and it works OK. I need to export a group that is selected, not the who