Iphone 4 frozen and can not reset by sleep button

my iphone 4 is frozen and I can not reset by pressing sleep button since the spring in it conveniently broke after the warranty ran out.  I need help, this is my young daughter phone and she is out of town and she has it with her.  Trying to reset it on icloud but it only says to go to your mac computer which I have windows computer to reset the phone.  Anybody know what to do?

If you have a Mac computer (I'm not sure if you do or not), try to reset the phone by syncing it with the Mac. Unfortunately, I don't know of any other ways to fix this issue -- the broken spring presents a large problem. You might need to end up going into an Apple store and buying a new phone. You should be able to have the sim card in the current phone be put into the new phone, but since the warranty has run out, you unfortunately will probably not be able to get a replacement phone.
Hope this helps a little. Sorry to hear of the issue with your daughter's phone.

Similar Messages

  • Ipod Frozen and can not RESET...

    Thanks for some of the messages... My Ipod is Frozen use it with a PowerBook... and have done all software updates... still my Ipod is frozen can not turn it on or RESET sometimes it will go on if I toggle the HOLD switch... Any ideas... to mak matters worse I am in Latin AMerica right now working with no access to any APPLE support!!!!

    Did your try the Five "R"s?
    http://www.apple.com/support/ipod/five_rs/
    Yes does not work... will not even turn on...

  • My ipad is locked and can not reset it. how do i reset a locked ipad

    My ipad is locked and can not reset it. How do I reset it.

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How do i remove the Icloud Lock on a Iphone thats Clean and can not get in touch with the oraganal owner

    How do i remove the Icloud Lock on a Iphone that's Clean and can not get in touch with the oraganal owner
    thers no  you cant put a reset tool on your site to reset phones thats not stolen or in lost mode

    it's an anti-theft measure DAH Its Not Stolen SO what the crap Then. I wish thay would Remove it From there Ios and Redo it so it Only Locke if you Report it Stolen  or enter Lost Mode. BC thers A lot of PPL that abuse it.

  • My iphone will not turn back to main screen it is frozen and can not get to go back

    my iphone will not get out of a locked function.  The phone at the bottom where you usually slide to unlock in changing in Japanese, and other symbols.  As well as I can not see anything or turn the phone on when unplugged.  after the screen has done the Japanese thing it acts like it needs to be plugged into computer to download itunes and states that it needs itunes to be restored.  Once I plug it into computer it only shows apple screen.  Any help?

    Try forcing a reboot on your iPhone. Hold down the Home button and Sleep button simultaneously for about ten seconds. Ignore anything the phone does and do not release until the screen goes dark and you see the Apple symbol. If your iPhone still wants to connect to iTunes, do so and see what happens. If there is still a problem, click Restore on your iPhone's summary page in iTunes. First restore from backup to try and preserve your content, but if this fails, you may have to restore your iPhone as new and manually set it up again. Good luck!
    Russell

  • Have an i tuneslogo with a usbpugin showing but is frozen and can not change

    I have an Itunes logo showing in my sceen with a white USB pugin but everithing is frozen and I can not change anything?

    You have to set up your phone and activate it using iTunes before you can use it.  Start iTunes on your computer, plug in your iPhone and follow the instructions for activating it.

  • J2EE_ADMIN locked during the upgrade and can not reset it

    Hello All,
    I am doing Solution Manager upgrade and it is stuck because j2ee_admin password is not correct.
    I want to unlock and reset the password  but this is what happening .:
    1. I try to login with old j2ee_admin password but it is not correct.
    2. I re-check with updating same to configtool but no luck
    3.I have enabled emergency SAP* ID and can login to Visual Admin so
    4. when I try to access UserAdmin so that I can unlock j2ee_admin it gives me error as  Application error occurred
    during request processing
    Is there any way to reset /Unlock j2ee_admin even though NWA/ user admin is not available.
    Please help me so that I can move ahead with upgrade
    Thanks,
    Supriya

    Hi Supriya,
    What phase of your upgrade are you at ?
    Is your ABAP stack still up ?
    If your ABAP is still up then unlock the user with tx SU01.
    KR,
    Amerjit

  • Lost "Encrypt iPhone Backup PW and can not Restore iPhone from iTunes?

    Late LATE night attempt to Reset iPhone via USB connection to iTunes ened up insread with me Erasing All Content and Settings from iPhone directly after encrypted back up of phone to Macbook then attempting Restore from Macbook to iPhone. Lost most of my iPhone contacts and still cannot remember or find copy of pw for encrypted backup UNLESS that is because my Macbook is now encrypted with FileVault. I put a copy of the password for encrypting iPhone Backup in my 1password app and am positive it is good is only being rejected because Macbook in now encrypted. All I want is my iPhone contacts. So I am de-encrypting my Macbook now. Kind of in a pickle when you loose the only copy of you resonal contacts. Can anyone help sort this mess out? My level of computer competence is really lacking.
    If they would just stop spying so much these things (encryptions, FileVault etc)  would not be nessaccary.

    The syncing is happening through the cell network not the wifi so it didn't help to turn off the router.  Here's what I ended up doing that finally worked:
    I restored the backup.  Before I could use the phone, it takes me through a few steps.  On the icloud step, I actually skipped it, so I didn't enter my password.  At that point the phone was usable again so I went to settings>icloud and turned off Contacts.  I double checked and my contacts were still on my phone.  THen I went to settings>icloud and entered my password and the turned contacts back on.  At that point it asked me if I wanted the contacts merged and I said yes.  A few minutes later my contacts were still on my phone and I checked my icloud account online and the contacts had been syced there as well.  Finally!  It worked!

  • Password does not work after time machine restore and can not reset from CD

    The hard drive failed on my Power Mac G5. I replaced it and restored everything from Time Machine. The two non -admin accounts I can log into fine but my password for the admin account does not.  I tried resetting it booting from the OSX CD and using the password reset utility. It says it has done its thing but then I reboot and try to log in same problem.  It even has the old password hint.  I changed that  so I could see if it worked. I tried both my account and the root account out of desperation.  Any help appreciated!

    Hello, there's some corruption on the HDD, try this...
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    Admin Hack...
    http://www.hackmac.org/?q=node/4
    Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.

  • IPhone 4 - bought and can not activate

    Can anyone out there help me, as I am going around in circles!!!!
    Lost my iPhone 4 just before Christmas, insurance company will not cover loss (don't go there!) so I have had to purchase a handset only iPhone 4.
    To try and save a bot of money at Xmas, I purchased through a private sale. Phone arrived, no problems and inserted the new microsim O2 had sent for when I got a new phone. Activated sim with O2 and inserted into phone.
    The phone I believe has never been used therefore I need to go through the configuration, i.e telling it British, UK region, location services, Wi-Fi networks, then when activating phone it says 'only compatible SIM cards from a supported Carrier maybe used to activate iPhone. Phoned O2 who say sim is fine and activated, they said it seems the phone maybe blocked.
    Went to Apple Store in London, and they said it was purchased in Ireland and therefore maybe blocked by carrier over there. I contacted the guy who sold me the phone and he said although he had not used the phone in Ireland, he had put in an Irish sim to test phone before he sent it to me.
    How do I go about unlocking the phone so I can use it?????
    Any help would be greatly appreciated.

    ONLY the carrier it is locked to can authorize unlocking it. Most require that you are a current customer with several months of service AT LEAST under your belt before they will unlock, and then there is a charge.
    According to this list: http://support.apple.com/kb/ht1937 All of the carriers in Ireland offer unlocking. Contact the carrier it is locked to and find out what their requirements are. In some cases, carriers may not unlock phones except for the ORIGINAL purchaser.

  • I forgot my Itunes Password and can not reset it

    I have two Apple ID's and I forgot one of the passwords...when I go to reset it, I choose the email verification,but the email never comes.  I then choose security answer and it will not accept my answers or birthdate.  Any suggestions?

    Follow the instructions on this page : http://support.apple.com/kb/HT1212 - they should let you reset your iPad and you can then restore/resync your content to it

  • TS1410 MY LAP TOP DOES NOT RECOGNIZE MY IPOD. AFTER ABOUT 20 MINUTES I GET A MESSAGE THAT SAYS MY IPOD HAS BEEN CORRUPTED AND NEEDS TO BE RESTORED. ALSO THE IPOD ITSELF HAS FROZEN AND CAN NOT BE TURNED OFF OR RE-SET BUY HOLDING THE MIDDLE BUTTON.

    MY LAPTOP DIES NOT RECOGNIZE MY IPOD. AFTER ABOUT 20 MINUTES I GET A MESSAGE THAT SAYS MY IPOD HAS BEEN CORRUPTED AND NEEDS TO BE RESTORED. ALSO AFTER THE IPOD HAS BEEN CONNECTED TO THE COMPUTER THE IPOD WILL FREEZE. I AM ONLY ABLE TO USE IT AFTER THE BATTERY HAS RUN OUT. WHAT COULD BE CAUSING THESE PROBLEMS AND HOW DO I RESTORE MY IPOD!!!!!

    Hey gwscrt,
    Since iTunes directed to you to restore your iPod, I'd check out the following article that goes over the steps to do so:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    I would read the document in full, but here are the applicable steps for you:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    Have a good one,
    David

  • I have tried several methods and can NOT reset my 2 home pages?

    I used your method to reset my 2 home pages. It's the first one I want to change - I inadvertently set it to www.google.ca/advanced search. I really want www.google.com, but it always reverts back to the.ca version.

    Do you get the international Google.com website if you open google.com via the location bar?
    Some sites like google automatically redirect you to a localized vrsion of the website, based on where your IP locates you.
    Clear the cache and the cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

  • Itunes says iphone is damaged and can not be activated

    What is wrong with my iphone? recently restored my iphone and now it says "The iphone you connected may be damaged and cannot be activated" it was working before the restore.
    Please help

    andya, I assume when you say 'activated", you mean with the cell provider...bringing it in to the cell world....here is a kb that is a starting point...
    http://support.apple.com/kb/TS3424

  • I have an iPhone 4S 8gb and can not update my ISO and know why can any one help me?

    I would like to update my iPhone softwares

    You show that you are running iOS 7.1.1 now, is that correct?

Maybe you are looking for

  • Error while Creating PO against PR - Message no. 06249

    Dear Team, Process is 1. PR is getting created thru Sales Order automatically. 2. PO is created for partial quantity.  Say 50 qty out of 100. 3. Again when we created PO for remained quantity, system throws error that it is already partially ordered.

  • Still not answered - please help

    I ran a test with a very large XML file. With this file, if I don't use the Xmx256m parameter for the Java VM, I get memory out of bound errors. If I run the XSL processor with the memory parameter, it runs fine (and takes about 2 minutes). If I then

  • Can't install Adobe AIR from badge installer on Windows after AIR 3.3 updated

    On Windows, the badge downloard won't install AIR. When the badge is clicked, it pops up a confirmation dialog to install Adobe AIR. When you click on "yes" button, progress bar indicate Adobe AIR is being installed but when the progress bar is compl

  • Can't close apps is07

    Can't close apps in IS07.02 - swipe up just doesn't work

  • Converting an array into lowercase HELP!

    I need to copy the catalogItem array into another away while making all of the letters lowercase. I have displayed the array and below it is the code I am trying to use to save the new array as String[] lower. Where is the error in my code or am I go