Iphone 4 frozen black screen?

iphone 4 screen black frozen?

Reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.

Similar Messages

  • Iphone 4 black screen, tried dfu mode, itunes not picking up device. not able to bring up red phone off slide bar or apple logo if any combination of button holding. HELP

    iphone 4 black screen, tried dfu mode itunes not picking up device. not able to bring up red phone off slide bar or apple logo if any combination of button holding.
    Phone was given to me by apple 2 weeks ago. Last I saw of it working was phone was off so i did the quick reset. Apple logo came up, it started up and keypad for passcode came up. It said 2% battery then went up to 64% a second later. When I was playing wth it not 5mins before it was at 65% so would make sence that later indication was correct. Before I could type the 4 digit passcode in the phone turned off to black screen. Now I have tried all possible reset options incuding the 10 second hold down of both buttons for less than 10 seconds and longer than 10 seconds. Nothing is working. iTunes is not recognising the device at all. Ive had it plugged into a wall socket for three hours and the computer for 2 hours and no signal of life. Ive tried the forums on here and the youtube vidoes and seem to know what im doing with resets. Anyone able to shed some light?

    Not being able to get DFU Mode indicates hardware failure. Since you recently received this iPhone from Apple it has at a minimum 90 day Warranty. Make Genius reservation or make service arrangements and take or send to Apple for resolution. Regarding what is actually wrong with the iPhone, it could be possibility of several things. But some of the features point directly to battery. First step in fixing this iPhone would be battery replacement. Then trouble-shooting from there if still problem. Take it to Apple.

  • Help with Iphone 4, frozen black screen

    concerning a iphone 4.  Screen showed apple logo, then went black.  left it alone, looked like it was restarting and then it went to grey screen. then back to black.  Cannot do anything with it?  It is just over 1 year old.  was bought brand new.  Someone help me!

    Are you sure the device has a charge? If so, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. It could take 15-30 seconds of holding the buttons to accomplish this.

  • My iphone is black screened and no powerbutton!

    So i connected my iphone to the charger and as it started i saw a grey screen with smal vertical colored lines in diffrent places.
    Then after a minute or 2 it turned black and i dont know what to do.
    My power button dosent work and its all Black, I just restarded my computer so when connecting to itunes it says i need to accept connecting through phone and i cant because of the black screen! what should i try/ what can i do?

    Well, you can see a lot on Youtube. However, the iPhone battery is not considered user servicable, and opening the device voids your warranty and any post-warranty service from Apple, and any support here on the forum. You to you what you do, but I would just make an appointment at the Genius Bar to have the device checked and get a replacement device.

  • HOW TO FIX A STUCK FROZEN BLACK SCREEN REMINDERS APP

    Sometimes my Reminders App gets stuck and/or shows a black screen. Nothing helps. Not even setting off and on my iPhone.
    HOW TO FIX A STUCK REMINDERS APP:
    1 - Turn off all your internet connection ( wifi, 3g ) e.g. set to airplane mode in settings
    2 - Turn of your iPhone
    3 - Turn on again
    4 - Open the app see if it's working.
    5 - Turn on your internet connection.
    It worked for me.
    Using IOS7

    Hi Turn off iPad Connect lead to USB on your PC Press & hold power on iPad don't let go Connect lead to iPad keep power button pressed until PC sees iPad. Then wait for Restore. Cheers Brian

  • Iphone 5 black screen

    iPhone 5 have a Black screen.
    The battery was fully charged .The screen went black while the Phone was still connected to the wall charger .
    Had to reset the device by pressing the Lock+Home button.
    Is this a known issue with iPhone 5 .I have never seen this before.

    Your phone is basically a small computer, and sometimes(rare), stuff like that happens. It may never happen again. If it happens frequently, yes, that indicates either a software/hardware problem. Just one time...I wouldn't worry about it, you did the right thing & fixed the issue.

  • IPhone 6 black screen but works

    After getting to work, I come to find out that my iPhone 6 has a black screen. Before that time, it worked just fine until I took it out of my pocket later this morning. The phone shows a black screen, but the buttons still work (the mute switch works; every time I mute it the phone vibrates). I tried connecting it to iTunes and it shows the phone. I assume that the screen has been bricked. I previously had a time where my phone was covered in rain water. That also explain why I have been experiencing crashes on my phone which led me to doing a hard restart. I have the choice of taking it back to my carrier as I'm still under warranty or I can try find out and fix this bug myself.
    Any Suggestions?
    Many thanks
    iPhone 6 running the latest iOS

    IIf you did a reset and screen remained black then it's a hardware issue, not a bug. You should return it under warranty if you still can. Any other attemp to fix on your own is probably going to void your warranty. 

  • Iphone 4 black screen not responding

    I was saving a picture on my iphone 4 and it was taking forever so I pressed cancel.  My iphone turned to a black screen and has been stuck on it for over two hours.  I have already tried holding down the home and on/off button together and the apple logo won't appear.  Can anyone help me out???  Thanks!

    I tried and the iphone didn't even pop up on itunes....

  • Aspen iphone simulator black screen

    hello, I have a big problem today:
    I am doing a simple piano, and I put 20 keys (on keyboard) with buttons
    (only first 9 buttons) but when I add the number 10, and build n go
    show me Succeeded NO ERRORS, good
    ut the iphone simulator turned in Black screen, and dont show nothing... why ?
    here is my .h and my .m (code)
    please !
    QUESTION: ... why if I add a
    IBOutlet UIButton *pteclax10;
    give me errors, I do not want to think Xcode only will let me use 9 buttons... please help me.
    thanks again.....
    here is my code in 2 pictures....
    http://www.1572-8.com/fotos/fotos-server/iphone-dev/x-lio1.jpg
    http://www.1572-8.com/fotos/fotos-server/iphone-dev/x-lio2.jpg
    Message was edited by: imaumac

    Have you tried actually running it on an iPhone or iPod Touch yet? That might make a difference.

  • IPhone suddenly- black screen

    Suddenly my phone turned off with 88% battery. It seemed to be operating fine a moment ago. I placed it on my table and I go to turn the screen on, and the thing just flat out turns off.
    Any ideas what to do? I plugged it in and nothing so far.

    the same thing happened to mine only being 4 days old with 43% battery. this happened after being in my pocket for a few mins and working fine. it was the black screen and unresponsive to both buttons no matter how long i held them down for, after about a minute being plugged in the apple icon came on and it booted up and still had 41% power.... any idea what is causing this?

  • IPod totally frozen, black screen.

    I just bought the new iPod touch 3rd gen and brought it home and plugged it into iTunes.
    I began downloading the update to 3.1.3 and after it had finished downloading the iPod got "Alert Message 6" and my iPod froze, locked up and is now completely unresponsive with a black screen a.k.a Bricked.
    I tried holding both the button apart and together and had no response.
    If I plug it into my computer I get a "USB Device not recognized" Message and the iPod remains black screened.

    Just posting this again, went back to the best buy were I had gotten the iPod and returned it for another one, this one has worked fine until I realized today that I hadn't installed the update to 3.1.3.
    I installed this update and afterwards I got the same error, #6 I think, and now again after trying to update it on a second iPod months later, it has crashed and is now completely useless yet again.
    When I plug it into my computer, I get an error telling me that the USB device is not recognized and iTunes does not register it either.
    Other then never updating my iPod again, I need some help because I do not feel like continuing this vicious circle.

  • Iphone 5s black screen with Voice Over On

    I turned on Voice Over on my iphone 5s and it started to repeat everything, so I had to punch 2 or 3 times some commands in order to go back and suddenly my screen blacked out. I have tried to restart the iPhone and can see the silver apple, but again I can hear the commands (I can still hear all the commands (Voice Over On, Screen Curtain On, 8:45, Screen Locked) but can’t see anything on the screen. Please help!

    Hello promomap,
    Thank you for the details of the issue you are experiencing with Voice Over.  Try turning off the Screen Curtain by triple tapping the screen with three fingers.
    Additionally, you can turn Voice Over off completely using these steps:
    Press the home button three times quickly. This is also called "Triple-click Home".
    If the VoiceOver feature still is on, you can navigate to Settings > General > Accessibility and turn VoiceOver off here.
    If it is too difficult to access those settings on your iPhone, you can turn VoiceOver off using iTunes:
    Managing accessibility features using iTunes
    Connect your iPhone, iPad, or iPod touch to any computer with iTunes installed.
    In iTunes, select your device.
    From the Summary pane, click Configure Universal Access in the Options section at the bottom.
    Select the feature you would like to use and click OK.
    You can find the full article here:
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Iphone 4S black screen, and screenshots are 768x by 576y. New screen makes no difference. Can access filesystem via Linux so phone not truly dead. Help!

    i have an iPhone 4S 64GB. The screen went blank. Screenshots done manually then accessed from the
    filesystem are found to be 768x576. New screen - still blank. Can't unlock the phone - can only access
    filesystem on computers that previously synced with it.
    iOS has done quite a good job of adapting to the 'new' resolution, but my phone is now useless. I can't
    unlock it because i guess iOS is strectching the screen beyond the touchscreen sensor.
    Any ideas what might be wrong - I could get an iphone repair shop to put a new screen connector in if
    that could be the problem (the could reball the sound DSP chip at the same time as that has failed;
    nothing some tape over the top mic can't fix but would rather not have to do that. I won't return to apple
    as they would just replace the motherboard (more likely the whole phone) and I would lose all my text
    messages, apps, and so on. Some apps are no longer on the app store either.
    Thank you for any advice - particularly as to why iOS is detecting a screen size that doesn't exist on
    any iOS device, and presumably this is at least one reason for the 'blank' screen (backlight works
    but screen is black). All the usual tricks like hard reset make no difference.
    Thank you!

    Thank you for your useful reply - it has solved the problem that my phone was running in
    an unsupported display mode that no iOS device ever made has run in!
    My laptop is also not user serviceable, but it seems to be running an nVidia card two
    generations ahead of the one it was made for, due to a BIOS modification.
    My MacBook Pro on the other hand definitely hasn't been taken apart, but at least it
    is the non-Retina one (I had the choice of both), and has the latest specs, and yet in
    the future will be user-servicable (e.g. replace battery on a Retina MacBook, or even
    replace the touchpad - will be an (impossible) nightmare!

  • HT4623 iphone 4s black screen

    I hear my phone working however the screen stays black.  hard reset isnt working

    Restore iPhone with current iTunes on computer. If still problem after that, and if there is Warranty or AppleCare make Genius reservation or Service arrangements and take or send to Apple for resolution. If no coverage, maybe the LCD connector came loose from the Logic Board and simply needs to be pressed back down into place. Or consider replacement of Front Screen Assembly. If you decide to let Apple handle this, out of warranty cost is $199 for iPhone 4S replacement.

  • IPhone 5 Black Screen (Problem different from all the others)

    Okay so, i woke up this morning to check the time on my phone which i did, then i unlocked the scren again via my lock button and then my home screen froze. After my homescreen froze the top of part went black then the rest of the screen faded away into darkness. So.. i tried reseting it and nothing.I tried charging it but only the end of the charger that goes into the phone gets hot, not my phone. I tried resetting for 10 secs nothing, 20 nothing. iTunes hasn't recognized that there is an iPhone even in my macbook and i've tried DFU mode, recboot.. i've tried everything and i have no idea what i'm doing wrong. PLEASE HELP. I need my phone and i have no access right now to an Apple Store. Also my phone isn't on, i called it and it went straight to voicemail, the vibrating switch doesn't work either..

    It's likely either hacked/jailbroken, or has hardware damage.  You can try restoring to factory settings, but that might not work for either of these situations.
    Use iTunes to restore your iOS device to factory settings

Maybe you are looking for

  • Back up plan

    We have an xServe and xRAID with 2 3.7TB RAID 5 drives. One of the drives is used for production work. I would like to have an incremental back-up made on the other drive. In the past we used Retrospect to back up files to tape but then you are force

  • I cannot change page properties

    My page length is 49000 because when i try to change it to 2000 or under it auto jumps longer and longer using the side drag tabs. And when I go into page properties to set manually, nothing changes on page. Please help Thanks

  • Problem with RxTxSerial installation in Windows

    Hello, I have a problem using RxTx Serial in Windows XP, using NetBeans. I have followed the instructions:     copy rxtxSerial.dll to [JDK-directory]\jre\bin\rxtxSerial.dll     copy RXTXcomm.jar to [JDK-directory]\jre\lib\ext\RXTXcomm.jarand I have a

  • The application ''nautilus'' has quit unexpectedly.

    When i start gnome i get this message: The application ''nautilus'' has quit unexpectedly. You can inform the dvelopers of what happened to help them fix it. Or you can restart the application right now restarting doesnt help. This stops all the menu

  • Burn to Disk/save to disk image

    A short answer is fine if you can send me to where i can find the explanation of what exactly these are are how to do it. Is it MAC 101? I am new to mac I have been using the same ol movie to experiment with and see what i can do. I tried to burn the