IPhone 4 (GSM) with a graphics card problem (artifacts).

Hi,
My iPhone 4 (GSM) started making a color bands about two minimeters flush with the bottom edge of the screen and about a month and a half later the picture started to bounce and now it appears on the screen that I could call artifacts. I'm sure that the problem comes from the graphics card.
Serial Number: 81*****A4S

Yes it does. You just need to obtain a SIM card from your carrier.

Similar Messages

Problems running PC game with bootcamp, graphics card problem?

I have searched extensively on answers to this question and I've gotten some vague ideas of what to do, but not a direct answer.
I recently installed a copy of Windows on my 15in Macbook Pro (the ones that came out right before the latest ones in late August/Early October 2008 or whatever). I did this in order to play Final Fantasy XI Online on my laptop. The machine is more than capable of running the game and I've read forum posts that had said that it works fine through bootcamp. I installed the game and was playing it just fine until one day the game began to lag really bad in areas where there were a lot of people or in other words something very demanding of the memory/graphics. I don't mean internet speed lag, I mean the computer would slow the game down to a crawl and the sound would be sort of garbled like it was some sort of feedback. It would happen periodically or if some sort of animation would start (spellcasting, etc)
I've tried everything from changing the settings of the game so that it's not as demanding to installing modified drivers for the graphics card (256mb Nvidia GeForce 8600M GT). I read that there may be some problems with the graphics and sound cards communicating which causes lag?
The computer also gets unnaturally hot while I run the game/windows in general. Could it be a cooling problem?
Please help!

Processor:
Intel(R) Celeron(R) CPU E1400 @ 2,00GHz (2 CPUs)
Memory:
4gig,Corsair TwinX XMS2 DDR2 800Mhz
Hard Drive:
Seagate 1 TB
Video Card:
ATI Radeon HD 3850 X2
Monitor:
EIZO monitor
Sound Card:
Realtek 7.1 HD Sound
Speakers/Headphones:
Mikomi 5.1 HD @ Headphones
Keyboard:
Logitech Gaming Keyboard
Mouse:
Logitech MX510 Gaming Mouse
Mouse Surface:
Belkin Mouse Mat
Operating System:
Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090804-1435)
Motherboard:
MSI P35 Neo 2
Computer Case:
CiT 1004 CSCIT1004 Black Screwless Gaming Case
PSU:600 Watt GreatPower
this is my gaming rig

Help with ( mobo + graphics card ) problem

i have a MSI P35 Neo2-FR: Platinum and my gpu is a ATI Radeon HD 3850 x2 that runs in crossfire.
i noticed the other day when i tryed a game for the 1st time in a while.. I only built this pc last xmas.. The problem i noticed is the preformance of the graphics card didn't seem up to scratch with the preformance i have looked around many sites but can't find a solution to the problem when i looked at the review of the MSI P35 Neo2-FR: Platinum motherboard that someone had wrote up i can't remember were i sow it but they said that the Duel cards they have only ran at 4x when i would have thought would run at x16
any solution how i can fix this problem?

Processor:
Intel(R) Celeron(R) CPU E1400 @ 2,00GHz (2 CPUs)
Memory:
4gig,Corsair TwinX XMS2 DDR2 800Mhz
Hard Drive:
Seagate 1 TB
Video Card:
ATI Radeon HD 3850 X2
Monitor:
EIZO monitor
Sound Card:
Realtek 7.1 HD Sound
Speakers/Headphones:
Mikomi 5.1 HD @ Headphones
Keyboard:
Logitech Gaming Keyboard
Mouse:
Logitech MX510 Gaming Mouse
Mouse Surface:
Belkin Mouse Mat
Operating System:
Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090804-1435)
Motherboard:
MSI P35 Neo 2
Computer Case:
CiT 1004 CSCIT1004 Black Screwless Gaming Case
PSU:600 Watt GreatPower
this is my gaming rig

MOVED: help with ( mobo + graphics card ) problem

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=133975.0

Processor:
Intel(R) Celeron(R) CPU E1400 @ 2,00GHz (2 CPUs)
Memory:
4gig,Corsair TwinX XMS2 DDR2 800Mhz
Hard Drive:
Seagate 1 TB
Video Card:
ATI Radeon HD 3850 X2
Monitor:
EIZO monitor
Sound Card:
Realtek 7.1 HD Sound
Speakers/Headphones:
Mikomi 5.1 HD @ Headphones
Keyboard:
Logitech Gaming Keyboard
Mouse:
Logitech MX510 Gaming Mouse
Mouse Surface:
Belkin Mouse Mat
Operating System:
Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090804-1435)
Motherboard:
MSI P35 Neo 2
Computer Case:
CiT 1004 CSCIT1004 Black Screwless Gaming Case
PSU:600 Watt GreatPower
this is my gaming rig

Problem with discrete graphic card and DirectX 11

If I try any application to launch with discrete graphic card (nvidia geforce 740m) that using directx 11 it always crashes.
There no problems with directx 9 on on this graphic card.
There are no problems with integrated graphic card whether application using directx 9 or 11. Problem occurs only with discrete graphic card and directx 11.
The things that i did:
- Reinstall Windows
- Install latest driver updates (I also tried to uninstall latest and install recomended driver downloaded from the oficial HP support 'driver download' web page)
- different options on nvidia control panel 3d settings page
I also tried microsoft 'Direct3D Tutorial Win32 Sample' source code to build and debug. It is failed in function IDXGISwapChain:resent with code DXGI_ERROR_DEVICE_REMOVED and ID3D10Device::GetDeviceRemovedReason returns DXGI_ERROR_DRIVER INTERNAL_ERROR.
Is there any chance that is not hardware malfunction?
Model Envy 15-j175er
OS Windows 8.1 64

@Enegue ,
Hello and thank you for posting on the HP support forum. In your situation I would consider keeping with Directx 9. The reason I say this is your notebook is not a performance gaming machine. It is designed to be fore general use.
Some cards will notice issues when upgrading to direct 11 from a lower level.
Not to mention with your notebook you will want to stick with the drivers only provided from the HP support site. They are proprietary for the notebook and could be the reason why the directx 11 is not working.
Here is the link to your systems supported drivers.
HP ENVY 15-j175er Notebook PC (ENERGY STAR)
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Problem with nvidia graphic card, nvlddmkm.sys

I have a HP m9000 , originally it had Vista, it started to fail and display the error nvlddmkm.sys (on a blue screen od death), i intalled Windows 8 in hope the problem get resolve. but the problem still persist. At the beginning on W8 it looks like working fine, but suddenly it started to display "controller not responding", and then it is displayin "Something goes wrong with your graphic card".
I found on internet a fix; expanding the nvlddmkm.sy_ and replace the file in system32. i made it but right now after the windows logon screen the monitor starts to blink between black screen and off screen.
The grapghic card is a NVIDIA 8500 GT. I tested the graphic card in other computer, and at the begining it worked fine, but after the dirver installation it started to fail in the same way.
Ad far i could read on intetrnet it is a failure with NVIDIA.
Is there any solution for this problem? Or i should change the graphic video card? (Maybe for an ATI)

Hi,
I have used many different NVIDIA cards (including a 8600) on different PCs and never had your issue.
As for drivers, you can always use the original drivers that came with your PC and then do an update if necessary.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Greetings. Do you know if an unlocked Iphone 5S can switch from CDMA to GSM with a sim card, or if you have to choose one capacity or the other when you buy the phone? Many thanks.

Greetings. Do you know if an unlocked Iphone 5S can switch from CDMA to GSM with a sim card, or if you have to choose one capacity or the other when you buy the phone? Many thanks.

Is this a Verizon or Sprint iPhone 5S?

!!! Problem with 2nd graphic card !!!

Hi I have a big problem with my laptop.
I have an HP TouchSmart tm2-2000el Notebook, with Windows 7 64-bit.
2nd Graphic card is ATI RADEON HD Series 5450.
When I activate this hardware from Control Panel desktop goes black but every function are ok (sounds, illumination and all cmds).
So I must restart my computer in Safe Mode disactivate ATI Radeon HD 5450 and restart it.
Laptop run but only with Intel graphic card.
I tried to search update drivers on Amd/ATI site: amd online software reveals Ati radeon HD 5000 Series but after download Ati software tell me that is impossible to install drivers because there isn't an ATI Radeon HD 5000 Series.
So I have low graphics and CPU with 69°C because intel graphic card runs over...
I haven't found any driver for my model of laptop on HP Assistance.
Touchsmart spec
How can I do now?
Thanks
Alberto

This is the right driver for switchable graphics...do not also install the Intel only driver, you do not need both.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90545-1&cc=us&dlc=en&lc=en&...

Mail (4.6) in OS10.6.8 shows several photo attachments with discoloration, distortion (jagged lines, splotches of color, etc.). Could it be a graphics card problem?

My mother-in-law's MacBook Pro 13 (m2009) Mail (4.6) with OS 10.6.8 shows several
photo attachments with discoloration, distortion (jagged lines, splotches of color, etc.).
Could it be a graphics card problem?
Or a bad unpacking of attachments over poor WiFi/Internet?
If anyone has an idea, I'd appreciate your help.
Thanks from Japan!
Dan

Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The better your description, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

M6600 Re-occuring AMD FirePro M8900 Mobility Graphics Card Problem

I'm supporting a Dell Precision Workstation Laptop M6600 Ship Date: 31 August 2011. The workstation has been experiencing re-occuring graphic card failures. The system's original configuration was
Operating System
Microsoft Windows 7 - 64-bit Enterprise Edition
LCD
VCV1F1   Liquid Crystal Display, 17.3FHD, Light Emitting Diode, Low Voltage Differential Signaling, AG, Z, Length/Long, 2
Graphics Card
RWMYR1   MODULE..., CARD (CIRCUIT)..., GRAPHICS..., N1BLACKCOMBXT0C21R1SERVICE CHARGE..., SOFTWARE..., DRIVER..., ATI TECHNOLOGIES INC..., BLACKCOMBXT
63PDH1    Screw, MOSAIC/MIDAS,M2P3,M2P4 & TANG..., 5X5, Phillips Head, THREAD FORMED..., BCS
6W46K1    Assembly, Card, Graphics, BLACKCOMBXT
Graphic Heat Sink
7JMFV1    HEATSINK..., W/FAN, NOTEBOOK..., GRAPHICS..., M6600
Current BIOS Information
Video Controller = AMD FirePro M8900 Mobility
Video BIOS = 013.012.000.014040357
Video Memory = 2048 Mb
Panel Type = 17.3" FHD
Native Resolution = 1920 x 1080
Known Service History
From what I can find out.
14 Jan 2013 - my client was experiencing display artifaces and the graphics card failed the Dell Diags video memory test. The graphic card replaced by Dell Tech.
13 Jun 2013 - my client was again experiencing display artifaces, running Dell Diags reported both hard drive and graphic video memory failed testing. I was concerned that the graphic card had failed again so quickly I worried there may be another defective part was causing the graphic card failure. I figured the most likely cause would be overheating and since the graphics card has an independent heatsink and cooling fan assembly I submitted Dell Warranty Request W03725377 requesting new hard drive, new graphics card, and new graphics card heatsink.
18 July 2013 - my client was again experiencing display problems. He reported:
The laptop has developed the same problem again. Soon as I switched it on over the weekend, the screen split into two and then it froze and then there were stripes on the screen. I shut it down and switched it on again, hoping this will work but the screen just remained black.
I booted into Dell Diags and shortly after starting the basic test when the test moved from solid blue to the GUI vertical yellow bars appeared. The yellow bars were visible throughout all testing except the LCD test and on the BIOS Screen. The LCD test didn't show the yellow vertical bars but it did show the repeating series of white dots that I have seen before with previous graphics card memory failures. I tried booting into Safe Mode and Safe Mode VGA 640 x 480. All attempts end with a black screen.
I can order and replace the graphics card under warranty but it seems obvious that something is causing the repeated graphic card failures and I want to fix the problem. I've been searching the forums and it seems other people have been experiencing related problems. I've quoted a thread I believe may be relevant
This thread explores a possible combination of LCD Panel Manufacturer and Graphics Card Manufacturer/ Model
- http://en.community.dell.com/support-forums/laptop/f/3519/p/19437928/20058048.aspx#20058048

I believe I have a similar problem with my Dell M6600 with AMD(ATI) M8900 graphics card. I've used the computer without problems for 1 1/2 years and 3 days ago I noticed the mouse pointer getting corrupted, then the screen flashed and went dark. I've tried system restore without success. When I remove all the ATI software, the computer works with the Generic VGA driver. I spent 2 days trying to reinstall the ATI drivers from both Dell and AMD with no success again. This has been very frustrating as it takes hours to do a system repair check, boot in Safe Mode and remove the ATI software.When the ATI driver/software bundle is installed the computer does not boot correctly and go to a black screen after the Windows boot up logo. As soon as I remove all the ATI drivers and software the computer boots again and works with the Generic VGA driver. I don't want to erase my hard drives (RAID 1) just to try to fix this. I will buy another laptop hard drive and try a clean Windows 7 Pro install. My guess is that either the graphic card is going bad or ATI drivers are not compatible with the latest Windows Update. Did you have any luck fixing your problem?

My board is not working with any graphic cards except mine(mx400)

Dear friends!
I have sent a message but noone understood!
My problem is simple.
My mainboard is i845 MSI 6528LE!
My graphic card is INCA MX 400 Ge force2!
My mainboard is working good with this graphic card.But it is not working with other cards!For instance Winfast MX440,Asus FX 5200,Ati 9100,Ati 9200SE...
Why!I tried lots of things.Bios update, i845 driver update...
Please is there anyone who understand tis problem in MSI?
Thanks!...
0t is not a power suply or voltage or driver problem okey!!!!

I understand that you are frustrated, but it will help us all to help you if you create a Signature with all the info, and specs of your PC...As this info will keep us from having to guess for example, What Operating system are you running? Windows, Linux?, if Windows what version?, What type and speed Memory are you using? What type of CPU, a P-4, a Celeron, what speed?.ect. What Voltage is the Mem. set to, Voltage of the CPU?...These are all things that we need to know..Otherwise if we do not have this info we have to guess....So please we want to help ..But you have to give us all the info we need ...Sean REILLY875

Ok, so I have a 1g macbook Pro and I'm having an issue with the graphics card, so I believe.

     I believe I'm having an issue with the graphics card. For one, when I'm using programs like iMovie '11, SPORE, or the Sims 3 for long periods (hours usualy) of time, the computer will be perfectly fine. It gets warmish-hot, like usuall, all of a sudden it will randomly freeze for 5 to 10 seconds, then shut down and reststart. This happens, espically on the Sims 3 I can play for a while, but when I try to save it will shut down on me.
     Also, I got a new iPod touch 4g on the 25th, the first few times I tried syncing and downloading, it started off fine, but after 10 min. it would restart. Now it works ok, but I still monitor it just incase.
     Can anyone help me understand why all of this is happening? I beleve the graphics card isn't good enough, even though it meets the standards for iLife, and The Sims 3. My graphics card is a ATI,RadeonX1600. The laptop has 2 GB RAM runs at 2.16GHz with an Intel Core Duo on OS X Snow Lepard (10.6.8). Thanks everyone.

Threads are just processes that link together like the threads in these discussions, well, maybe that is a bad example given how disjointed these get
It looks like you are not pushing the cpu or hard drive enough to cause your behavior. Not sure what the temperature limit on that cpu is, on the newer models it is around 100-110 °C which is notciabley hot, and the system shutsdown for self protection at the thermal limit.
You could be hitting a thermal limit causing that behavior...so do you see good behavior at lower load levela on the system? Does this only happen with when you are under the high graphic loads?
Trying to zero in on when this occurs to see if we an isolate the problem.

Is it possible to set primary and secondary display with 2 graphics cards?

I have an Early 2008 Mac Pro with two graphics cards and four monitors installed. Does anyone know how the computer (or more specifically Keynote) determines which is the primary display and which is the secondary?
Also is there any way to change the scheme?
What I am trying to do is switch the primary and secondary from the two monitors in my office to the monitor at the podium (would like it to become primary) and a vga projector (would like it to become secondary)
I bought the second graphics card so I wouldn't have to switch the cables back and forth three times a week. All the monitors work fine, it's just a matter of determining or changing primary/secondary
Thanks in advance

Thanks Malcolm
I got that far – The keynote manual says that the display with the menu bar is the primary display – that works out fine. The problem is that the manual says that the display without the menu bar is the secondary (or alternate). But there are three displays without the menu bar.
What I would like to find out is: is there a way to choose the display without the menu bar to be the alternate?
When I try various combinations, there seems to be no rhyme or reason as to which display is the alternate.
Thanks again for your response!

Is anyone still having discrete graphics card problems after replacement

Is anyone still having discrete graphics card problems after replacement?
Macbook Pro eligible for replacement through Apple program.
Submitted my computer 2 days before program came into effect.
They replaced card or logic board with same original model: AMD Radeon HD 6770M 1024 MB
Issued me a refund check for my repair.
Seems to have some noticeable issues, fan running more than usual again, and temporary graphic lines,
but disappear too fast before a screen dump...
Is anyone who has participated in the replacement program received a different graphic card for
Model Macbook Pro 17" (late 2011)
Thank you for the reply.

Unfortunately I have yet to call AppleCare because I am on a project for 3 weeks and cannot be without my laptop during that period....
Until that time I am trying to figure out what I can do to protect the Palm Rest/Mouse Pad area of my Macbook once they either fix it or give me a new one. Has anyone had any experience with either of these products that can provide some input as to whether they are good or bad?
http://www.marware.com/cgi-bin/WebObjects/Marware.woa/6/wa/selectedCategory?cata logCatID=224&wosid=djXnz6k0JQiXbGEX7Stos0
http://www.powersupportusa.com/products/macbook-wrtp.php?category=mb

Update Disaster. Graphics card problems.

(yes, MORE problems!)
Ok I dont really think its a disaster but it sure fells like it.
My computer (G5 desktop OS 10.4.9, no intel) crashed and powed down during an update. Now nothing functions properly! I get this when it starts.
Sysmquickmenu quit unexpectadly.
and: archiveassistant quit unexpectadly.
AND: sh:line 1 command not found. Operation not permitted.
Also my itunes says its version 7.1.1 but the new features are not visable.
My graphics card seems to be glitching when i start up.
The screen color is very dark, i notice when i exit a Hi-Def game the color returns to normal. So when i start up i enter the game and then exit, to see properly.
By the way im using an Apple LCD Cinema Display

I also experienced problems with my graphics card after installing the latest update via the "software update" application. I have the standard GeForce FX 5200 installed in my Power Mac G5 Dual 2GHz. After the update, the available resolutions listed in my "display preferences" were changed. Several additional resolutions were added, most of which were "interlaced." I normally run my display, a Sony Multiscan crt, at 1024 x 768. This was now only available as a "interlaced" option, which would not display properly on my monitor. I downloaded the 10.4.9 Combo Updater directly from the Apple web site. Once I ran the combo updater, it removed the "interlaced" options and restored my normal choices. Everything is now running smoothly. If anyone is having graphics card issues, I would give the combo updater a try.
Power Mac G5 Dual 2GHz Mac OS X (10.4.8)

IPhone 4 (GSM) with a graphics card problem (artifacts).

Similar Messages

Maybe you are looking for