Iphone 4 has no service after replacing screen and updating, phone company says sim is fine. any ideas? thanks
iphone 4 has no service after replacing screen and updating, phone company says sim is fine. any ideas? thanks
We had this happen with a ipad mini, took it back to person who worked on it, after a week with trying to get it working again, he replaced it. I will agree with the other replies take it back to repair place there must be something inside the phone that if you don't do repair excalty right it messes up all phone functions. Also I would give the repair person a time frame to either get it working or replace it.
Similar Messages
-
when im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.
You must have a valid form of payment for the app store in the country you are using. Most app stores are separate legal entities to comply with local laws. It is possible to have an account without a credit card, however; see: http://support.apple.com/kb/HT2534
-
I've had to reset my sons iCloud password as we forgot it and it's still saying incorrect password! Any ideas? As we can't even get online on his iPad..
As soon as we turn the iPad on its asks for the iCloud password.. Says it's incorrect.. Try to get online and it comes up again.. Same thing. Then says to go to settings to verify password.. Go into the iCloud settings and it asks for the password again and low and behold it's still incorrect.
-
Iphone has no service after restore
I restored my iphone (1st generation) and now I have no service. The screen only shows connect to itunes screen. Whe I connect to itunes, itunes sees the iphone, but no tabs are available. Summary tab is missing as are all other tabs.
How do I get the iphone activated again so I can have service?If you see No Service in the status bar of your iPhone or iPad - Apple Support
-
My iphone has no service after i upgraded to 4.3.2
I just upgraded my iphone from 4.0.2 to 4.3.2 and now there is no service and i have an unnofficial sim card because there is no at&ts or any official sim card here in cambodia and its just been a very dissapointing 4 weeks please help
I am having the same problem. I have a normal iphone4 and when I upgraded to ios7, suddenly no one can hear me on calls. It works with speakerphone and on a headset, and I can play music normally. It has to be software, or else why would speakerphone work? My phone also functioned just fine before this upgrade and now my phone is useless as a phone.
-
My Razor Maxx has lost it's swipe keyboard and it's voice to text since the "update"...any ideas how to fix it?
Hello bsbb4!
I'm sorry for any inconvenience in the Swype keyboard beng removed in the Kitkat update. No worries, though! You can simply go to the Google Play Store and there are many Swype keyboards you can use. Most are free and many can be personalized to your style!
I hope this information is helpful.
Thank you,
ChristinaB_VZW
VZW Support
Follow us on Twitter @VZWSupport -
Iphone 5 no service after new screen
can any one help just keeps coming up with no service tried rebooting a few times ,reset everything no joy and help please
Talk to whoever replaced the screen. If it was replaced by Apple, they should not have let it leave the store if it wasn't working, and if it failed after they replaced the screen, you should take it back to them to have it checked.
If it was replaced by someone other than Apple, Apple won't touch it any more. -
My HP 520 Touchsmart only has a blue HP screen and none of the F keys work. Any ideas?
My HP 520 Touchsmart showed be the blue HP screen this morning and none of the function keys F9-F11 produce any results.
i would discuss this with your carrier
-
NO sound from speakers after update only headphone jack works, speakers work on FaceTime
many thanks MarkReboot the iPad and see if that helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
HT2646 I have everything connected properly and my tv still says no signal. Any ideas?
I have my apple tv 2nd gen. connected to my power source, and connected to my tv using a HDMI cord, and its not working. I turn on my tv, then go to the proper input (HDMI3), and it says no signal, ive tried everything. Help, please...
Welcome to the Apple Community.
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another HDMI cable.
Make sure your TV supports 720p (Apple TV 2)
Try the Apple TV with another TV -
My ipod has lines all over the screen and would there be any way to get that fixed?
My I pod touch has lines all over the screen and I was wondering if there would be any way to get that fixed?
Try the standard fixes to rule out a hardware problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If stil problem you very likely have a hardware problem.
Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place may be less expensive. Here is one.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
IPhone 5 won't vibrate, after replacing motor and flex cable!
iPhone 5 won't vibrate, after replacing motor and flex cable! I made sure the contacts are lined up and touching. When I put my ear right up to the phone and do something that should make it vibrate, I can hear something, but the phone is definitely not vibrating ( I watched the motor and it didn't move at all.
Apple will not touch the phone once it has been opened. Try to find a competent third party repair outfit to fix the damage.
-
My iPhone has no service and I have done everything as per instructions from Apple and still nothing works no service it is not my sim either? Help?
Please post in your native language - this is an international forum so
someone will respond. Your post does not make sense in English. -
I am using iphone model MC603B is factory unlocked and updated os 5.0 when i use any carrier in it there always on screen no service please hlep me out .
SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?
How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)
Maybe you are looking for
-
Effects Don't work with Ray-Traced 3D?
Hello, I'm working on a 3D logo for a company, and I'm trying to snaz what I have done with some effects, but the effects don't work. For example, I tried adding the CC Light Wipe Effect, but it will only show up when I switch back to the classic 3D
-
I have a VGA Adapter for the iPad and it only works when I plug it into an iPad 2. The iPad one does not ever get found by the projector. The Porjector supports 720p and 1080p. Are there two types of VGA adapters? Did I buy the wrong one? The Firmwar
-
How do I get past iPhoto start page?
I have upgraded iPhoto 11 and I can't figure out how to get past the stupid Welcome to iPhoto page. I can briefly see the iphoto stuff for a second, then it reverts back to the Welcome to iPhoto page. How do I get rid of this? TEd
-
TS4006 can't display google map in IE9, why?
Stupid!
-
PROBLEM WITH MS 7522 VER 3.1 MOTHER BOARD
hey guys, need some help here. my setup is a MS-7522 ver 3.1 mother board. 6GB RAM MSI GEFORCE N470 GTX WINDOWS 7 PRO 64BIT since i bought it from last year, its not stable and having an occasionally blue screen specially when using it with heavy pro