Iphone 4 hide number when calling

I Cant off my calling ID on my Iphone-4.
Can anyone please help me to ID my caller ID as a Private Number to others.

I cant able to Off it.. Its showing as ON i cant even to slide to Off
please help me

Similar Messages

  • I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones.  It works when calling any other brand of cell phone.  Network carrier assures me problem is not on there side.  Any assistance will be appreciated.

    I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones.  It works when calling any other brand of cell phone.  Network carrier assures me problem is not on there side.  Any assistance will be appreciated.

    I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones.  It works when calling any other brand of cell phone.  Network carrier assures me problem is not on there side.  Any assistance will be appreciated.

  • How do I block my number when calling someone

    How do I block my number when I call someone?

    You need to request that to your carrier.  Only they can hide your number from the Caller Id feature. Its not sometihng you can do on your phone.
    With that said, what does this have to do with Appleworks?   Apple works is an old defunct Office suite, like iWork, and Ms Office.  I'll request this be moved to the iPhone forum.

  • Re: Want hidden number when calling phones.

    he wants to HIDE his number when he calls from the desktop. as in, a number does not appear on the screen of the person who's receiving the call. i have a skype number but want to do the same, on some occasions. how can this be done?

    Hey everyone looking to hide their number,
    I have been searching for how to make this work since Skype updated recently. I even spent about an hour on the live chat with a customer service rep, who was very little help at all. In the past it was as simple as Tools->Options->Calls Tab->Disable Caller ID. Well that option/setting is no longer available. But rest assured it is possible to hide your number. This afternoon I decided to try activating the caller ID, then deactivating it. By doing this it now shows my number as unknown for everyone that I call. Hope this helps you all.
    TL;DR Activate caller ID, then Deactivate CallerID to hide number.
    Have a good one,
    Bryan

  • Can't see my number when call or send SMS

    Hi,
    I have followed the instruction on this page:
    https://support.skype.com/en-us/faq/FA672/How-do-I​-show-my-mobile-number-when-sending-texts-from-Sky​...
    I activated my number a month ago but still when I can someone from Skype or send them a SMS they don't see my number. They see a random number.
    When I go to reactivatte my phone number it doesn't let me. It says it already has been activated.
    What should I do?

    If the user manual solutions do not work, take your iPod Nano in for repairs as you are still under warranty for hardware issues. 
    iPod Manuals 

  • Is there any way to hide number when sending or making call from J2ME app?

    Hello all,
    Is there any way that i hide the number to which the call is made. Like when i do platform request to call a phone number, it asks for permission showing the real number to which it's makin the call, I want to hide this number and make call to another number which the user won't notice.
    I think this might not be possible.

    I want to hide this number and make call to another number{color:#000080}Even if there were a way, and if I knew about it, I wouldn't tell you.
    Happily, j2me does not allow crooks like you to deceive the rest of us.
    db{color}

  • Hide called number when calling is tranfered to called

    Hi,
    My client is asking for a feature he had before on ist old Alactel PBX and can't find it in the service parameters.
    Actually when someone call the helpdesk number at night, the help desk transfer him to the mobile of the in charge person, the issue with Cisco 4.1(3)SR6 is that the mobile number appears on the screen of the IpPhone which is A big problem since the guys can know call the in charge person directly without following the procedure !!
    Do you have any solution or it is simply impossible. Actually my client doesn't mind if its for all transfer!!
    Thanks for your help
    Rgds
    Luc

    Ok, sorry I didn't understand from the description!
    You will need to set the Calling Line Presentation on the gateways then to restrict the outbound number.
    You can do this by going into the route list details and set the "Calling Party Transformations" to "off". This will restrict the CLID sending of any calls going outbound (for anybody within your organisation using this gateway).
    If I've still not understood this and you mean you want to stop the mobile number from sending its CLID then unfortunately you've had to turn this off on the mobile.

  • Want hidden number when calling phones.

    I am using my skype account for international mystery-shopping. Is there anyway that I can hide the number? Currently it looks like I am calling from California when I call, which looks strange when I do mystery shopping to European businesses. And since I do multiple calls to the same place I would like for the call to be anonymous. Help??
    Thank you for responding.

    TOPIC CLOSED
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • IPhone 4 audio unavailable when calling/answering phone calls.

    When I place a call, or receive a call, I am unable to hear anything on the other end, and the other user can't hear me.
    If they call and leave me a message, I can listen to that just fine. All other audio works - apps, music, voicemail, etc. I can even Facetime chat without problems, it's just my phone call that drops out.
    I've tried the headphone trick, as well as compressed air, restarted, left off for long period of time, removed/reinserted SIM card. None of it seems to help. Any thoughts?

    Hi Friend,
    Try to use the volume buttons to adjust it. Go to Settings>>Sounds, and check if Adjust Volume with buttons is turned on.
    Check in Settings>>General>>Restrictions if there is a restriction for volume turned on. If yes, turn it off and set the volume limit as higher as possible.
    The speaker is easy to break if wet, even wet for a little. My girlfriend's iPhone speaker broke with some drops of a drink.
    Anyway, check if Restrictions is turned on, rebbot your idevice, be sure you have selected a pernonalized sound (ringtone) that works (change to a standard ringtone), check if "Do Not Disturb" is turned off.
    Go to Settings >> Sounds and turn Adjust with Buttons on. In Message sound, be sure you set a standard Apple ringtone. Tap it again to listen the ringtone ringing. If not ring, well, your speaker probably has a problem.
    Hope it helps

  • IPhone 4s not sound when calling out

    Hi, how are you guys!
    Hi I recently updated my 4s to iOS 7.1, everything works fine but when i decied to try and make a phone call i realized the calls connects but when I try to speak I get no feedback (no one answer) I thought that was a fluke well tried one more time samething, the thing is that i get no feedback when i call out, i say well i guess this **** is fuckd up not worrying cause i have another one and i just have to replace the logic board and put it on the most recent 4s i have,
    Guess what? SAME ISSUE this can not be a HARDWARE issue cause I placed the 2nd logicboard (the one i dont use) on the case of my iphone and it is working so that means has to so something with software I called the Customer Care, their answer is for just 199$ they will replace my phone so nice they are so considered.
    Iam just looking for answer, does anyone besides me has the issue? what should I do? What have you tried?

    You wouldnt believe it, i have exactly the same issue and it happened as of last sunday day after you posted this. I have tried all the fixes on the internet and they all dont help. The only places i seem to hear people on calls is when i use Viber or tango etc. Looks like its straigh to Apple

  • Show my cell number when calling and still reacha...

    Hi,
    I have activated so my cell phone number is showed when making skype out calls.
    I also want to activate a "skype in" number so people can call me on skype using a Swedish number.
    If I activate "skype in", can I still make calls on "skype out" and that the reciever of the call sees my cell number? I don't want the "skype" in number to be showed.
    I would like to know this before enabling "skype in". Thanks in advance!

    Hi, Jungheinrich, and welcome to the Community,
    What you describe is how I have my Caller ID set up, and it works for me - I am in the USA.  Here is a link to the library of FAQ articles related to Caller ID, so you can peruse and make an informed decision - I do not know if Caller ID is upported in your location.
    https://support.skype.com/en/category/CALLER_IDENTIFICATION/
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • How to hide URL when calling Reports from Forms 10g.

    Hi ,
    When end user runs a report through a form then report output is displayed and following type of URL is also generated on address bar of browser: http://server:7778/reports/rwservlet/getjobid22243?server=rep_servername_appsrv
    Can we hide this URL so that the user cant change the JOB_ID and get access to other previous reports.
    Thanks & Regards,
    NL

    Actually, there are several options including the one already offered above. Here are a few more:
    1. If you are using 10.1.2.3 and a newer JRE on the client (e.g. 1.6.0_10 or newer), you could use java script to open the report. This will not be a perfect solution because it may not work if using a non-IE browser or if java scripting is disabled. Refer to MyOracleSupport Article 265863.1 for more information.
    EXAMPLE:
    WEB.SHOW_DOCUMENT ('javascript:void(window.open("http://www.oracle.com","","location=no,toolbar=no,menubar=no,"));self.close()','_blank');Replace the url in the above example with the call to your report.
    2. Set the age of the cache to a very short value so that it is only available long enough to be viewed by the user who created it. In other words, when setting the reports properties in your Forms code, include the Reports "others" parameter with TOLERANCE=1
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'TOLERANCE=1');This will cause the cache (on the server) to live for only one minute then be deleted. Refer to the Report Deployment Guide for more information.
    3. Upgrade to Fusion Middleware (Forms/Reports) 11. In version 11, the Reports jobid can be randomized. See section 18.8.2 of the Reports 11 Deployment Guide
    http://download.oracle.com/docs/cd/E14571_01/bi.1111/b32121/toc.htm

  • How do I block my number when calling out?

    I want to prevent them from knowing that I am calling. I have to use my cell phone for business, but I do not want every client having my telephone number.

        Hi KKimberlyKK,
    Here I am to save the day! Here is a link that will give you the ability to only have certain customers see your number!
    http://bit.ly/RgmuXg
    Thank you,
    GeorgeP_VZW
    Follow us on Twitter @VZWSupport

  • Iphone 4 cracking sound when calling someone.

    History - I've been having issues with iPhone4 ever since I got it on the 24th june. First the visual voice mail didn't work for the longest time. I did everything apple and at&t asked me to do and reset the phone and network settings. Finally I had to reset it as a new phone and couldn't use any back up. I did this a week back.
    I answered a call today afternoon and there was a cracking sound. The other person couldn't hear me and i couldn't hear them. I restarted my phone twice and I could hear them clearly. But they still couldn't hear me. I tried using earphones and the mic and they still couldn't hear me. My mic works fine since I can record just perfect and when I connect the earphones I can listen to music and hear the typing as well. Everything except when I call someone. Sometimes after restarting my phone it works. (like once in 5 times).
    WHAT DO I DO
    I realized I hadn't answered any calls for 40 hrs. And I'm pretty sure I didn't drop it. Plus it is well protected with a case. But I'm still pretty sure I didn't drop it.
    Any suggestions ??
    It has 4.1 installed.

    Do you know what might be the reason ?
    cuz somehow they always have reasons why not to replace it n' why it's not in warranty anymore

  • Where to find my iphone 5s serial number when it doesnt turn on

    my phone wont turn on and i need to find the serial number to get help on apple website i already tried the numbers on the back but its not working

    Find the serial number and other information for your iPhone, iPad, and iPod touch - Apple Support

Maybe you are looking for