IPhone 4 in BMW with Bluetooth audio no track info

I recently installed my new iPhone 4 with 4.26 software on it in my bmw528 and activated Bluetooth audio. I do have the ability to play music, but it says that the track info cannot be displayed. It only shows a forward and back arrow to go to next track or back to previous track. Is this normal? If I use the USB connection I can see everything, including playlists and trac info,
Any ideas?
Thanks

Favila55 wrote:
I recently installed my new iPhone 4 with 4.26 software on it in my bmw528 and activated Bluetooth audio. I do have the ability to play music, but it says that the track info cannot be displayed. It only shows a forward and back arrow to go to next track or back to previous track. Is this normal? If I use the USB connection I can see everything, including playlists and trac info,
Any ideas?
Thanks
Hi Favial55: That is certainly the way it operates on my Bluetooth equipped Tundra. Bluetooth simply displays "Streaming Audio"
Hope this helps
Stedman

Similar Messages

Is Logic Pro X compatible with M Audio Fast Track Ultra ?

I'm running Logic 8 Pro with M-Audio Fast Track Ultra.
I'd like to upgrade to Logic Pro X.
Will these components be compatible?

If it has a Mountain Lion compatible driver then it should work. (Its not about LPX compatibility.. its about OS X compatibility that matters in almost every case)
See here for the drivers...
http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Ultra-Drivers
V2.2.2 is 10.8 compatible however there are several threads in their forums that indicate issues with 10.8.3 and higher...
Here is an example..
http://community.m-audio.com/m-audio/topics/driver_for_m_audio_fast_track_ultra_ mac_mountain_lion_10_8_3
Given that your interface is no longer a supported item.. and Avid have taken over M-Audio.. it might be that there will be no further updates leaving you unfortunately, with an out of date and no longer supported piece of hardware... which frankly is typical of M-Audio...
As a quick aside... This is why I stick with Motu equipment.. and have done so for many, many years now. Their support both for new and legacy devices is and has always been.. excellent.. and my original Ultralite Mk1 which is at least 7 years old now I believe, is still fully supported in the latest OS X version. using the latest Motu Drivers..
Anyhow.. Check with M-Audio/Avid to find out if this has been resolved......

Hi, I want to know if Logic Pro X running on Mavericks works ok with M-Audio Fast Track before buying it.

Hi, I want to know if Logic Pro X running on Mavericks works ok with M-Audio Fast Track before buying it.

Hi,
Yes the Scarlett 2i2 will work with Logic Pro or Reason, make sure you download the latest version of our driver (1.5 dmg for MAC) from focusrite.com downloads page.
Hope this information helps.
Best regards.

No signal with M-AUDIO Fast Track

Hello,
I just got the Logic Pro 8 and I have only used garageband.......I used to be fine with M-AUDIO Fast Track......but now in the logic studio I'm not getting a signal......I went to preference click on fast track as the input source but not even getting the smallest signal........I have no clue what I'm doing wrong.....does fast track even work with logic pro?.....
Thanks

I have a FastTrack, and in my experience, it has many issues. The biggest is that it craps out on a regular basis, say every couple hours, or if sleep mode occurs, etc. Then, in order to 'wake it up' again, it requires cycling the power, which in many cases will cause the entire system to hang (no mouse movement, nothing) for about 2-4 minutes! I have the latest drivers for it, and my system is clean. This is simply bad driver code on M-Audio's part I would recommend anyone who is thinking of buying this unit, look elsewhere. Go with MOTU or etc.
I know that doesn't help much, but it needs to be said...

My iPhone cannot find my bluetooth audio system

My iPhone 4s with iOS 6.1.1 can connect my bluetooth headset successfully.
But I want to connect to my JVC ux-gn9v bluetooth audio system, it failed!
I turn on the bluetooth and get stuck in finding bluetooth devices.
There is no ux-gn9v show on the bluetooth list.
But htc phone can connect to JVC ux-gn9v successfully.
BTW, I had tried to restart my iPhone many times, it not working also.
How to connect my JVC ux-gn9v? any suggection?
Please advice!
Thanks!

Hey kennethfrommascoutah,
Thanks for using Apple Support Communities.
Since you are having trouble using AirPrint follow this section of the article.
About AirPrint
http://support.apple.com/kb/ht4356
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
Have a nice day,
Mario

Can anyone help me with bluetooth audio problem?

I was able to pair my 4s with my bluetooth with no problem. However, it automatically also pairs with BTaudio (I have a 2011 Subaru Forrester). So when I get into my car and turn on BT, it connects with BT audio and my music from my itunes starts playing. I have to remember to pause it everytime I get into the car or it stays on and eats up my battery. I went to the Apple store and called Subaru and noone know what to do. I can't seem to pair it only with bluetooth. Anyone else have this problem and know what I can do about it?

The problem is in the car; it is requesting that the music play as soon as the iPhone connects. I have the same problem with my Prius. Except I unpaired it, then paired it again and this time said NO to play music via BT. When I want to play music from the phone I plug it in to the USB outlet in the car, which also charges the phone and gives me Toyota's Entune Internet access through the phone. But it also starts playing as soon as I connect it, which I agree is annoying.

My ipod touch 4th gen won't pair with bluetooth audio receiver?

My ipod touch 4th gen won't pair with my aluratech istream universal bluetooth audio receiver. It automatically paired the first time I used it, but now will not pair. I removed the bluetooth receiver from the ipod because it kept saying make sure the receiver device is on and within range. Now it doesn't even detect the bluetooth receiver. Any ideas?

Thank you! We got the bluetooth receiver to use with our car stereo and our motorcycle stereo and were very frustrated when it quit working. Thank you for helping me solve the problem!

I cannot get my iPhone to connect with bluetooth to my Sony sound bar. I have tried everything. It searches and says underneath in the gray "Now Discoverable". Suggestions? It is the Sony 4-452-002-14 sound bar.

We just installed our soundbar and cannot connect our iphones with bluetooth. My friend has the same iphone (5S) and works fine.
He does have a different carrier (ATT) I have Verizon. I would not think that would matter. His iphone connection was immediate. We did repower the speaker and that did not work. My phone is searching for a signal and below that in the gray it says (now discoverable) THe powerbar is the Sony 4-452-002-14. Suggestions?

Hello, OhBuckeye.
Thank you for visiting Apple Support Communities.
Sometimes the issue may simply be resolved by placing the accessory in pairing mode. However, when experiencing issues with Bluetooth connections, here are a couple articles I would recommend going through.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/ht1664
Cheers,
Jason H.

Iphone 5 call with bluetooth (problem)

Hi
since I update the IOS for the IOS 8.0 I have a problem using the bluetooth in my car (Mazda 6 2008). The iPhone connects to the car bluetooth system and works fine, the only problem is when I make a call, I don't hear the ringing sound, only start to listen when the person answers the call. If the person dont answer the call I dont even know if Im making a call or not because there is no ringing sound.
I think that this Is a problem with the IOS, it appears tha the iPhone only uses the bluetooth when the call is answer and not when I start to call.
In the previous versions of IOS everything works fine. I've tried to restore the last backup, hard reset, reset the network configurations, remove and pair the iPhone with the car again, but nothing works.
Anyone with the same issue?
Thanks

Hi rebecchina and M100 users.
I am very happy with my M100 Plantronics due to the aural information on battery life, connected etc. I was disapointed that it didn't work for my new iPhone 5, untill I was offered to trade off with another brand but I was unsatisfied with the other bluetooth that did not have any information service. So I tried sereral was untill I got fed up with it and I held the outboard butten on the M100 for 10 seconds or so - then it connected! And it just works perfectly now
Mike from Denmark

Recording with M-Audio Fast Track USB Audio Interface

New Mac owner and am completely lost. I am wanting to record guitar and vocal tracks into GB and when I plugged in the M-Audio I could see a wave file when after I hit the record button but I couldn't hear anything. I selected it as the default for input and output and turned the monitor on...but am getting zero sound. HELP!

I actually just picked one up and this is what the process is...
I must reiterate the first line... Do not install any of the packaged software as it does not help, or do anything beneficial... just use Garageband.
This is to record a plug in guitar.
IT IS NOT NECESSARY TO LOAD ANY DISCS THAT COME WITH THE DEVICE
1. Connect M-Audio Fast Track USB to appropriate USB port on computer.
ex. MacBook Pro - use forward port (port furthest away from display)
Also, see note 2 for M-Audio knowledge base, support etc...
2. Open System Preferences and:
-Select M-Audio Fast Track USB icon
-Select "About" button and note Audio Firmware version
-Select "Updates" to open M-Audio web site
-Select: USB Audio Series<Fast Track USB< MAC OS 10.5.7 (or appropriate operating system)
-Note version number of latest drive and download if
necessary to update your M-Audio
- Select "Sound" in Hardware row of System Preferences
-Select "Input" button and select M-Audio Fast Track USB
- No need to change "Output" regardless of how you want to listen to playback!
3. Connect guitar to M-Audio box (a pre-amp will boost output, but is not necessary)
- Make sure button on rear of M-Audio box is selected properly for guitar
4. Open Garage Band (Do Not open Garage Band prior to connecting M-Audio)
- Select New Project - Electric Guitar
5. Open Garage Band Preferences
- Select "Audio/MIDI" button
-Audio Output select:
- "Built-in Output" to use computer's speaker or headphones/speakers connected directly to computer OR
- "M-Audio Fast Track USB" to listen to headphones/speakers
connected directly to M-Audio box (use Mix knob and Output knob on front of M-Audio box to control ouput if choosing this set-up)
-Audio Input select:
-"M-Audio Fast track USB"
6. Choose an Amp model in Garage Band
- Double-click picture of amp (this displays rear picture of amp and access to settings)
-Select: Input Source : Mono2(M-Audio Fast Track USB) NOT MONO 1!
of if using Mic and guitar : Stereo2 (M-Audio Fast Track USB)
7. Record
This saved me from throwing the thing out the window... It works well now!

Adobe Audition with M-Audio Fast Track Pro mic input

I must be missing a setting somewhere. I have two mics going into the M-Audio Fast Track Pro (XLR inputs). Mic 1 works fine but no input from Mic 2 although I have audio coming through my headsets when speaking into Mic 2 - it just doesn't register in Adobe Audition. I have switched mics and cables and all are fine. The issue is with Mic 2.
Again, Mic 1 is working fine and Mic 2 is picking up audio and feeding to my headphones but not to Adobe Audition. I have all the latest drivers installed.
I am on a Win7 (32bit) system. Microphones are Shure PG-42's (phantom powered condenser microphones).
I contacted M-Audio support and phone-verified that all Fast Track Pro settings were proper. Seems to be a setting or driver issue in Audition. I've spent hours trouble-shooting to no avail. In the meantime, I'm using a Y-splitter running both mics into Mic Input 1 on the Fast Track Pro which works fine but I really need seperate control over each microphone. I have interviews coming up soon and would like to find a resolution quickly. Can anyone help? Thanks!

Archie! Good stuff! I'm almost there...
I've got my Adobe Audition set up with the settings you gave me - everything is armed and good-to-go... but then...
When I hit record Tracks one and two look like they're recording but there is no level (no audio) going into the tracks.
If I go back to the Edit view and try to record the entire fills with green as if I'm filling it 100% with sound. This has never happened before.
I suspect I've got something hosed-up in my "Audio Hardware Setup" under the Edit section.
My selections for Audio Driver Setup are:
1) M-Audio USB ASIO
2) ASIOforALLv2
3) Audition 3.0 Windows Sound
If you could give me some direction as to the settings in "Audio Harware Setup" I feel I've almost got it.
Thanks!

FCE 4 with M-Audio Fast Track Pro

I have an M-Audio Fast Track Pro with a condenser mike using phantom power, connected via USB.
I have used that at length for voiceovers on iMovie '08 without any issues.
Now I'm making the transition to FCE 4, and when I select "Voiceovers" and then change the microphone from "Inbuilt" to "M-Audio Fast Track Pro", I get an immediate Kernel Panic.
Latest drivers for M-Audio FTP are installed (and they specify 10.5.2 compatibility.
Using 10.5.2 with all latest software updates on a 2.8Ghz 24" iMac.
Any ideas?
Many thanks.

Thanks Jonathan, yeah, me too (just starting out).
I must admit, I haven't investigated Soundtrack - though I wonder if the issue of Kernel Panic would be any different - I can try, at least. So, thanks for the suggestion - but I guess that the "Voiceover" facility in FCE is there for a reason.
By the way - my initial info was in error - the M-Audio driver specifies 10.5.1 not 10.5.2. All you OSX experts - would such an OS upgrade be likely to make a difference to a driver like that - or is that an impossible question?
Thanks again,
Greg

Soundproblem: Mac Book Pro with M-Audio Fast Track pro.

Powerbook: Mac Book pro 10.6.8., 2,66 Ghz, Intel Core i7, 4GB
Interface: M-Audio: Fast track Pro
Version 1.8.1.
I have a problem with the M-Audio Interface with the Mac-Pro via USB. It sounds as if the speaker is broken. The Powerbook works normal - via intern soundcard no problem. The Interface, too. I checked it with my Mac Pro (Mac Pro, 10.5.8, 2x 2,8 GHz Quad-Core Intel, 8GB Ram,) no problem!
Ger: Seit neuestem Krächzt und rauscht der Sound über das M-Audio Interface, als wären die Speaker durchgeknallt. Lief sonst immer ohne Probleme. Weiss nicht ob es an 10.6.8 oder dem M-Audio liegt? Der Rechner läuft sonst einwandfrei - interne Audio läuft tadellos. Das Interface genauso - auch meinem festen Rechner Mac Pro, 10.5.8, 2x 2,8 GHz Quad-Core Intel, 8GB Ram,

No problem, you need to select an audio track and select input monitoring if you want to hear something and of course recording (the first two square buttons in the track, marked I and R) and plug your headphones into the M-Audio otherwise you won't hear anything (as mentioned above) cause that is what the m-audio is for, it replaces your computer's sound card. And unless you set up some aggregate device your computer's sound card will not work...and (nearly forgot) if you plug in your guitar in one channel you need to select a mono audio track to record otherwise it will be only on one side.

MacBook not pairing with Bluetooth Audio Sink Typhoon

I did not have success trying to get my MacBook to pair with a Typhoon Bluetooth Audio Receiver Set (http://www.typhoon.de/en/art.php?p=1523&pv=3 ).
The Typhoon device claims to be a A2DP-SNK (stereo audio sink) .
My MacBook (10.4.8 up to date, with a Bluetooth-MightyMouse) Bluetooth-Assistant finds it in "Search-all"-Mode and labels it as "BT Receiver", and also finds it if I search for Headsets alone.
But after that, it just sits there and "collects additional information.", which "should take only seconds".
There is no timeout on this, no error message is given either.
Actually, with this Audio-Receiver came an Audio-Transmitter (a USB-BT-Dongle). Connecting this with a MacBook USB-Port does not result in any reaction of the machine.
The BT-Dongle should be able to do most BT-profiles, including GAP,SPP,HSP,HID and A2DP.
The System.log does not show anything, except for a "kernel[0]: (3795: ps)tfp: failed on 0:" happening every 3 seconds continually.
I'm hoping for any ideas... Or should I dump this device?
Did anyone of you get an audio-sink (with Line-Out) working with OSX?
Thanks,
visioneer7
MacBook Mac OS X (10.4.8)

I've just found out that my Macbook's Bluetooth spec is Bluetooth 2.0+EDR and my keyboard's Bluetooth is 3.0. Would this be of any issue?

ITunes crashes with BlueTooth audio - JAMBOX

iTunes freezes and crashes with error code 13014 when trying to launch while a BlueTooth audio device is tuned on - in this case, a Jawbone JAMBOX. It can pair successfully, but connection can be intermittant and often a reboot is needed for the connection to stabilize. iTunes has worked okay when the Jambox is in MONO mode over BlueTooth, but when it is in STEREO mode, the Jambox crashes iTunes.
Anyone know anything about the JAMBOX used with iTunes, or more specifically, with a MBP early 2011 running Snow Leopard 10.6.8 and iTunes v10.4 ?
Thanks

I have also had this problem with my MacBook Pro. It's not all the time, but often with Jambox on, iTunes freezes. Turn it off, and iTunes plays just fine. Also get awful quality when trying to use Jambox with some feeds from Firefox. From the comments of others, this seems to be an Apple problem rather than a Jambox problem. Any thoughts?

IPhone 4 in BMW with Bluetooth audio no track info

Similar Messages

Maybe you are looking for