Iphone 4 internet only works with wifi

I have an iphone 4 (no 'S') and for some reason I can't connect to the internet or access any apps that need to connect unless I am using wifi.  It started after the most recent software update, but I can't find anything online that talks about it.  Phone calls and texts work with no problem.  I think I just need to make sure all of my settings are correct, but again, I can't find a troubleshooting checklist anywhere.  Can anyone help me??

Have you tried resetting your network connections?  Setting => General => Reset => Reset Network Settings
This will clear buffers and reconnect you to the nearest cell tower. (Or at least the one with the strongest signal in your area.)
Also clear History, cookies and data in Safari.  Settings => Safari => Clear History, Clear Cookies and Data.

Similar Messages

  • Iphone 4 7.0.6 internet only works with wifi

    I use an iphone 4 ios 7.0.6. Last week i got stuck on Apple logo and i restore from backup after that I can't connect to the internet or access any apps that need to connect with mobile internet unless I am using wifi. I can't find anything online that talks about this. Phone calls and texts sms still working but imessage and facetime usable with apple id only (my phone no. disappear). Also i have done 'reset network', 'cellular data is on" and contact my mobile carrier( they are trying to straighten out). I really need to get my phone back to normal. I can't find a troubleshooting checklist anywhere. Help me please.

    This is definately an issue relating to your cellular data connectivity.  iMessage and FaceTime both need an active data connection (or wifi) to activate the phone number as well as fully functioning text messaging service.
    It looks like you have tried a few things already to remedy your issue.  Once thing I would do next is backup your iPhone via iTunes (not iCloud) again and then restore it via iTunes and set it up as new and see if it can access the internet via cellular data (wifi off).  Also, test to see if you can activate iMessage & FaceTime with your phone number.  If all is working well at this point, then pplug it back into iTunes and cick Restore Backup (not Restore iPhone), then select your backup and continue.
    If the issue does not go away when set up as new, notify your carrier as there is an issue occuring connecting service and it's not software related.  It could be something on the carrier's end or your SIM card.
    Source: http://support.apple.com/kb/ts3780

  • I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a pho

    I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a phone. Any suggestions?

    Most of the current Apple Intel based computers are comparable in CPU speed. I don't think it is so much the model of laptop as it is the memory, and storage capacity of the machine. If you are going to use FCP on a regular basis, perhaps as a professional or semi-professional, then you should think about the maximum memory and a very large capacity internal disk drive. For instance, one hour of finished compressed video will take up about 1.5 to 2Gbytes of disk space. If you add up the raw footage and still imagery and audio, you'll use up your disk drive capacity real quick. So a hard disk on the order of 750Gbytes @ 7200rpms might be good for video editing. 5400RPMs might be slow to rendering times. Rendering a video might take up a lot of memory so more memory is better e.g. 8Gbytes.
    As a rule of thumb, once you get to about 80% of your disk drive or memory you'll see degradation of performance.
    You can check out macsales.com. THey have a menu system that will allow you to pick and choose from various alternatives. BTW, it's been said that although Macs are typically spec'd at a certain memory size, macsales.com found that Apple computers will actually support higher memory levels. That is, if 4Gbytes are spec'd, some machines support 6Gbytes. macsales.com will provide the guidance for you.
    You might also consider buying an external disk e.g. 500Gbytes to carry around with you for back-up or transport to another machine.

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • I have been unable make a FaceTime call with a 3G connection.  I get s message " You are not connected to wifi.". Does FaceTime only work with wifi?  It happened two different times, when calling a Mac laptop and an iPod which had wifi connections.

    I have been unable to use FaceTime on my iPad2 when I only have a 3G connection.  I get a message saying " You do are not
    connected to wifi."  Does it only work with wifi?

    "I have been unable to use FaceTime on my iPad2 when I only have a 3G connection"
    Correct.
    "I get a message saying " You do are not connected to wifi."  Does it only work with wifi?"
    Yes.

  • Does FaceTime only work with wifi?

    Does face time only work on wifi? Trying to face time another person   It will not work.  I have wifi but they dont

    Over 3G if your carrier supports such, & running iOS 6.0 or higher.

  • IPhone 3GS suddenly stopped working with wifi in only one location

    This is the situation.  I have an iPhone 3GS and it the wifi suddenly stopped working at my house (just with the iPhone).
    I have an Airport express (latest generation) and a time capsule (1st generation).  All of my devices (except a PC laptop which isn't much of an issue, and the iPhone) cannot connect to it.  The devices I have are as follows: Apple TV, iPod Touch, iPad 2, the "new" iPad, a macintosh computer.
    However, when I move the Airport express to my work location, and plug it into the ethernet there, the iPhone works totally fine.  It seems like the issue is just at my house.  The Time Capsule works intermittently sometimes; random devices cannot connect to the network sometimes.  The airport express seemed to fix this problem.  I have read that this problem is related to the operating system "Lion" but the network was working fine for months and months after I have upgraded to lion.  Sometimes both devices cease to work, and there is no internet to any devices in my home.
    The network is password protected, so that removes the possibility of neighbors connecting to the network.  The name of the network contains spaces and "symbols" which I have heard is an issue for PC's trying to connect to networks.  Both my home and my workplace are on the same internet provider.
    My questions are:
    Why does the airport express work with the iPhone at my workplace and not at my house?
    How many devices can a 1st gen Time Capsule handle at once?
    If I buy an airport extreme, will it fix this issue?
    How can I fix this?
    I have restarted the device several times (both the iPhone and Time Capsule) and it still didn't fix anything.

    Using the delete all content and settings option is not restoring the iPhone. Using the delete all content and settings option does exactly that - all content and settings are securely deleted except for the firmware, which is not a restore.
    If you do this followed by re-installing an app via the iTunes sync process, the app settings and any data created and stored by the app will be lost. 3rd party app settings and data created and stored by a 3rd party app is not stored with the app on your iPhone and is not stored with the app or synced with the app in your iTunes library on your computer.
    3rd party app settings and data created and stored by a 3rd party app is stored separately from the app on your iPhone and is included with your iPhone's backup which is updated as the first step during the iTunes sync process.
    Restoring an iPhone with iTunes completely erases the iPhone first followed by the firmware being re-installed. After the firmware is re-installed, you are prompted to restore your iPhone from your iPhone's backup, which is the default selection. The other selection available is as a new iPhone. After either one, this must be followed by a sync with iTunes. If you restore from your iPhone's backup followed by re-installing an app that stores data you need to access, the data will be restored with the app. If you restore as a new iPhone or not from your iPhone's backup followed by re-installng an app, the app settings and any data created and stored by the app will not be restored with the app since you didn't restore your iPhone from your iPhone's backup where this data is stored.
    If you restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup with no change, you can follow this by restoring your iPhone with iTunes from your iPhone's backup to recover the 3rd party app settings and the data created and stored by the app along with all other data included with your iPhone's backup.

  • Viber only working with wifi, not with 3g

    Hi,
    Can anyone explain why viber works on my iphone nomatter if im in a wifi hotspot or in the middle of no where, yet my wife has to be in a wifi hotspot for it to work on her iphone? we both have 3gs iphones, both running os4.3.
    Could it be as simple as a setting?
    Regards
    Paul

    Hi, i have an ipnone 4 and im with Optus 3G. Viber is only working for me (send texts and make calls) ONLY when im on wi-fi. If im not connected to a wifi connection it will not send any texts or make a call. If i try send a text it turns into a red dot with an exclamation mark near my comment and then it comes up with a message saying "An internet connection is required to set up Viber. Check your connection and try again. The request timed out."
    Please can you reply to my email [email protected] with any help.
    Thanks

  • Internet only works on WIFI - 4g icons etc disappeared

    Hi guys,
    I have had a dig around online and can't seem to find a solution to my problem. My Sony Experia Z3 Compact had been working fine (probably for around 5 months) until recently. For some reason I can only access the Internet if I connect to WIFI - I don't get any 3g/4g etc icons at the top of the phone anymore say when I'm outside of WIFI. This problem has only just occured but it has been about two weeks now and it hasn't sorted itself out... I am fairly tech smart and have looked at all the obvious places in the Settings but can't seem to sort it.
    I did master reset my phone about 3 weeks ago (because it was being a bit slow / got annoyed and overreacted ha) but everything seemed fine after that (I think) and it has just suddenly started to play up on the Internet. The phone seems absolutely fine except for this one issue. I would just accept the problem because I normally use WIFI but having 4g sometimes can be a lifesaver so think its needed! ha
    Any help would be greatly appreciated.
    Thanks
    J
    Solved!
    Go to Solution.

    Hi,
    I have the same problem on my SONY Xperia Z3 Dual:
    No mobile internet when disabling WIFI or exiting a WIFI zone. However, the mobile internet works when I start the phone with WIFI disabled.
    I tried the following without success:
    1) resend and installed configuration SMS for Internet, MMS, and WAP settings from my mobile service provider.
    2) downloaded the Internetsettings as suggested above. I was asked for which net provider I want to download the Internetsettings, and chose the general net of my service provider)
    Can you help?
    Many thanks in advance.

  • After Update, Whatsapp, App World ando so on only work with Wifi

    Hi
    I updated yesterday from 4.6 to 5.0, everything worked fine, but now I can only connect to Whatsapp and App World with Wifi :/
    It's a8520
    Thank you for your help

    try ditching whatsapp and re-installing it. see if it works for whatsapp only and then you know what to do with the others. Whatsapp has a lot to answer for. it killed my bold last year while i was in portugal. you try restoring a berry on a portugese laptop in a bar while you are drunk

  • Apps only work with WiFi ... Is this correct?

    I just traded my iPod Touch in for an iPhone ... and I thought that I would be able to access e-mail, facebook, twitter (and all my other addictive apps) through the at&t network ... but they only seem to work when I'm connected to a WiFi network. Could this have something to do with transferring all my info from my iPod into my iPhone? How can I fix it?
    Thanks for you help

    You should be able to access the web and use the internet (with all of your apps) without Wi-Fi. AT&T's 3G, EDGE, and GPRS data networks access the internet. You should call AT&T or go to a retail store to find out if there is a problem with your account, like the data plan is missing or something.

  • Bb msn only works with wifi

    Hi, i have a BB Pearl 8120 and it has a problem!
    I can send BB messages, but i can't receive them if I don't have wifi connection! (but i do send without wifi connection)
    Sometimes I can connect with internet (browser icon) sometimes I can't
    I already updated the blackberry software with my PC
    PLEASE HELP! Obviously I don't have wireless connection everywhere i go, so i'm incomunicated
    The phone features work fine (regular SMS,  I can call and receive calls)
    What could be happening? 
    Thanks for your reply

    When you upgrade the OS, you MUST ensure that you aselect the options to wipe all existing appliucations from the phone, otherwsie it will only upgrade apps that can be upgraded.
    Meaning it wont refresh a corrupt OS if its the same version...
    Message Edited by OzBBerry42 on 08-26-2009 01:28 PM
    Checked out my Blackberry FAQ's and Links to Needed Articles here
    http://darkeen.homelinux.com/index.php/Blackberryfaq

  • Youtube not working with 3Gs, its only working with Wifi

    Hello,
    Can anyone help, i can only seem to get youtube on my new 3Gs iphone through wifi.
    Every time i try to connect through 3Gs it does not connect and displays the text "load more" with no pictures.
    Thank you.

    I've got the same issue?
    Can anyone help

  • Samsung Galaxy s4 only works with wifi connection. No mobile connection available?

    I can't connect to the internet unless it's thru a wifi connection.  Just started having this problem yesterday, 10/19/2014.

    There could be an outage in your area.  One thing you could try is resetting your SIM card, i.e., turn off the phone, remove the SIM card (be careful not to touch the gold contacts), wait a minute or two, then reinsert the SIM card, turn the phone back on, and allow it time to establish a fresh network connection.

  • 3G not working after ios7 update. Internet connection works with wifi but out and about phone won't conect to the internet via 3G. I've tried resetting the network settings but that doesn't work?

    I am not very technically minded and don't know where to start! Any (simple) advice gratefully received.

    Settings >> Cellular Data >> Cellular Data Networks
    you need to fill in the fields with correct data

Maybe you are looking for

  • How do I mix text and Html format in a java mail?

    How do I mix text and Html format in a java mail? some part I want to keep the text format, the other part I want to use Html functions(like fond, color, etc)

  • Purchase Order printed only once

    Hello. I need to print the PO automatically when I create it. But if the PO is changed or release it sholdn't printed again automatically. How can I configure the message for this purpose? Is it possible print only once? Thank you in advance. Regards

  • "RoboHelp for Word" vs "RoboHelp HTML"

    Hi all, I note there are two flavors for RoboHelp (wrt also working with Word + importing + exporting): - RoboHelp for Word - RoboHelp HTML Questions: 1. Am I right that it seems you can do everything with RoboHelp HTML that you can do with RoboHelp

  • Eps C++ parser

    Hi all, I am not sure if this question belongs here, but I guess this forum should be the most appropriate. I am working with eps (encapsulated postscript) files and was looking for a C++ parser which could parse such files. I tried looking on the we

  • Missing incoterms in vl10g

    Hi Gurus, Please explain which authorisation object Claudia reffering..... Q: Hi experts, I'd like to have information about the incoterms of the sales order when I use the transaction code VL10G. But although the fields INCO & INCO2 are available in