IPhone 4, iOS 4.2.1 & Bluetooth/Charging with TomTom Car Kit

All
FYI
I have had a 6 mth running battle with TomTom after numerous emails, calls, new replacement car kits and troubleshooting. I basically could not get my iPhone 4 to connect to Bluetooth of TomTom CarKit (find it in Bluetooth search), nor would the Carkit charge the phone. (there were other unrelated app issues too).
Turns out i am behind on this, as if you did not know already TomTom have told me over the phone (by v senior management team member) that the Carkit is not working with a "selection" of TomTom Carkit/iPhone users, due to a bug in the latest 4.2 and/or 4.2.1 iOS. It means the Carkit (£100 + £50 app!) bluetooth and charging feature (the main bits!) will not work with any devices on this iOS.
He says not all people have issue but TomTom working with Apple on it and no date set for updates to fix issue by them or Apple. It means you may as well not try to chase them or Apple as wont change a thing and put your car kit in the loft as it aint going to be fixed any time soon.
I did have my old bluetooth headset working fine, until i disconnect pairing and tried to re connect. It no longer will reconnect.
Any one else had this, got a fix or an update on the issue?
thanks

I found out today that when you turn off the GPS Enhancer (in TomTom go to Settings/Advanced/GPS Enhancer) the phone does not get so hot anymore and it actually charges in the car.
So from my short test, the GPS Enhancer seems to be the culprit.
Hope this helps.

Similar Messages

  • I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem

    I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem.
    Any ideas I'm pulling my hair out !!!

    Seems to be a hardware issue and you'll have to get it checked by visiting an Authorized Apple Service Provider, an Apple Store , to see if other 3rd party charger will work at their place.
    iPhone - Contact Support - Apple Support

  • IOS 4.2.1 messed up my TomTom Car Kit

    I have been using a TomTom Car Kit for my iPhone 4 a couple of weeks now. And it has been working great. But after updating iOS to 4.2.1 yesterday the phone keeps on giving me the following message.
    "This accessory is not optimized for this iPhone"
    "You may experience noise caused by cellurar interference and decrease in cellular signal strenght"
    "Dismiss"
    So; Every time i insert my iPhone in the Car Kit i have to "dismiss" the message.
    It's not the worst of happenings and i can live with it; but is there a fix for this error other than downgrade my iPhone to the previois version if iOS (if possible).

    It seems like it was a coincidence. My friend got the same problem with an iPhone 4 and the TomTom Car Kit; and it was not iOS / iPhone- related at all. Don't know why it happened but i am suspecting the sudden drop of temperature.
    This fixed the problem for both of us:
    Between the Car Kit and the iPhone 4 there are (or at least should be) an adapter that pushes the phone against the contacts. We both added three layers of ordinary- black electrical tape on the adapter. Making the preassure a litle bitt higher.
    Now it works for both of us.

  • IPhone 4S not working with TomTom Car Kit

    Hi,
    I have the TomTom car kit for 3GS and have just upgraded to iPhone 4S.
    I have one of the iPhone 4 adaptors from TomTom for the car kit, but even with this on, and trying some of the other suggestions online about a strip of velcro, I cannot get the cradle and the iPhone 4S to work together.
    Has anyone with a 4S managed to use it with the car kit?
    Thanks,
    Graz.

    Hi All
    Right, this is what worked for me;
    I had a iPhone 4 running ios 5 and all was fine. Since upgrading my to 4s my TomTom car kit wouldnt regognise the new phone.
    Remove the iPhone 4 adapter (retangular stick on thing that comes with the kit specifically for the iphone 4)
    turn it over so it is facing the wrong way. You should still have enough stick left behind on the kit itself to stick on again - must be the wrong way around!!
    Job done!!
    Works a treat

  • Iphone 3GS with bluetooth connection with Audi car kit

    I connected my iphone 3GS to my Audi car system through bluetooth connection. The Audi system recognizes the iphone and his address phone and all works well.
    The issue comes when I disconnect the iphone from the car kit. After, even someone calls me, the call ringtone rings only two times and after switches off during the incoming call. This issue is random, sometimes the alarm rings well, sometimes not by working in the way described above. Someone has the same issue and knows how solve it? Is an issue linked to hw or only sw?
    thanks
    Message was edited by: IGK

    Hi.,
    Can I check with you if you have this problem..
    I assume you have paired the iPhone 3GS to the Audi carkit.
    First, play something on the iPod.
    Then go to the Bluetooth settings page where you can see all the paired devices.
    after that, make a connection to the carkit.
    Is there any stuttering or audio breaking you hear from the carkit?
    I have this problem with my iTech BluebandR headset and iSkin Cerulean RX. I only found this problem with iPhone 3GS but it worked fine with 3G.

  • Tomtom car kit bluetooth not working

    I cannot get my iPhone 4S to connect to the Tomtom car kit via bluetooth.  The phone searches but does not find the car kit.

    I upgraded from the iPhone 4 to the 4S. I got the adapter from TomTom for the iPhone 4. When I insert the 4S, it connects OK and the phone charges. I did the reset of the Bluetooth and the TomTom Car Kit shows up on the iPhone. But when I attempt to pair the car kit using the code 5555 (as stated in the manual), it says the code is incorrect and will not pair.
    I've also tried using 0000 as the pairing code, with no success.
    So far, TomTom support has been very pleasant but ineffective in providing answers.
    Are other people having the same issue? Please respond if so.
    Has anyone been able to pair the car kit to an iPhone 4S? If so, PLEASE tell me how you did it?

  • Iphone 4 and tomtom car kit

    if i replace my 3gs with the new iphone 4, will the new one fit in my tomtom car kit?

    This is the response I got from mail support today:
    The TomTom car kit is currently available only for the normal iPhone, iPhone 3G and iPhone 3G S. As iPhone 4G is a newer product from Apple, it has not been tested for the TomTom car kit. Hence we regret that we will not be able to comment on its compatibility with iPhone 4G as of now. However, we are getting a lot of requests from customers regarding the same query and we are in a process to release a iPhone 4G compatible version of TomTom car kit soon. Also, I have forwarded your feedback to our Product Development Team for further review. We take all customer feedback received very seriously in the future development of our products. Suggestions are gathered and organized to understand the areas our customers are most interested in enhancing.

  • IPhone 6 iOS 8.0.2 - Bluetooth connectivity dropping HYUNDAI SONATA

    team-
    after I did the update to I OS 8.0.2 the Bluetooth Drops out in my car. It shows that it connects to the phone successfully but when I place a call after the first ring my car says call ended but the phone is still on an active call and the audio drops out. Is this because of the update? I was not experiencing this with the stock OS right out the box
    note: I attempted to stream music via Bluetooth in my car and I was able to do it for 3 minutes with no audio drop outs so it appears to be only with the calling and Bluetooth.
    Anyone one else experiencing this?

    Hey folks- this certainly did the trick for me!
    ChrisJ4203Sep 27, 2014 10:31 AM Re: iPhone 6 iOS 8.0.2 - Bluetooth connectivity dropping HYUNDAI SONATA
    Re: iPhone 6 iOS 8.0.2 - Bluetooth connectivity dropping HYUNDAI SONATAin response to Cossio
    I have got a 2012 Sonata Hybrid and mine is worked quite well. Is this phone an upgrade from an older phone? Did you restore from a backup of another iPhone. Did you name the new phone the same as the old phone. If this is the case, it can confuse the vehicle's Bluetooth system. Go to the phone and remove the vehicle from the list, turn off Bluetooth on the phone. Do a reset, holding the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Go to the vehicle, remove the phone from the list in the vehicle. Turn the vehicle off and then back on again. This will clear the system. Now turn the vehicle back on and put it into discovery/pairing mode. Go to the phone and turn on Bluetooth, which puts it into discovery/pairing mode. The two should connect with no issues.
    EDIT: Sorry, I didn't  mention I have a 5S with iOS8.0.2.

  • My iphone 3gs ios 6.1.6 shutdown itself with out any error

    my my iphone 3gs ios 6.1.6 shutdown itself with out any error & after restarting it the same thing happens please help

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.  If the issue persists, take the device to Apple for evaluation.

  • The application "Notes" on my IPhone 3GS (IOS 6.0.1) is synchronized with a homonymous application of my e-mail yahoo box. Please how to solve it ?

    The application "Notes" on my IPhone 3GS (IOS 6.0.1) is synchronized with a homonymous application of my e-mail yahoo box. Please how to solve it ?

    Nothing to solve that is normal behavior. You can also sync it with icloud (settings icloud and turn notes on, settings mail contacts calendars yahoo mail account turn notes off.)  Other email providers support notes sync as well, but right now your default is yahoo.

  • TS1702 My TomTom does not work following the upgrade to IOS 6.0 - I am getting poor GPS reception on my iPhone 3 using my TomTom car kit ( worked fine prior to upgrade!). I have tried to reset Location Services with no luck! - Help...

    My TomTom does not work following the upgrade to IOS 6.0 - I am getting poor GPS reception on my iPhone 3 using my TomTom car kit ( worked fine prior to upgrade!). I have tried to reset Location Services with no luck! - Help...

    Aa2009 wrote:
    he could have a 3gs but doesn't state 3g or 3gs
    Look at his tag line  

  • I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

    I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

    Hi,
    Normally yes, Bluetooth can connect to multiple devices at the same time, so yes.
    The only thing is that you'll be able to send sound/music to only one at a time, but I understand the Garmin HUD doesn't play sounds.
    cheers

  • Tomtom Car Kit iPhone 5

    Anyone knows if yet exsist a new Tomtom Car Kit compatible with iPhone 5?

    Same problem here with an iPhone 4. Charged properly in the car kit for months but since IOS 5 it doesn't charge.
    Tomtom have stated that v1.9 of the app is out soon, it'll reportedly fix the traffic updates on IOS5 and might also take care of other things they missed during the IOS beta period, hopefully it'll do something about this charging problem.

  • Synchronization of 8330 bluetooth with Audi car kit

    I have been able to synchronize my new 8330 via bluetooth to my Audi car kit with one problem. When an incoming call arrives, the car display shows "phone" but the phone does not ring on the car speaker. A short while later a loud 5 second "buzz" occurs. My previous Motorola phone rang on the car speaker. Do I need to set something in the 8330? The car kit has no settings. Help would be appreciated.
    Thanks,
    Bubba1805

    Hi.,
    Can I check with you if you have this problem..
    I assume you have paired the iPhone 3GS to the Audi carkit.
    First, play something on the iPod.
    Then go to the Bluetooth settings page where you can see all the paired devices.
    after that, make a connection to the carkit.
    Is there any stuttering or audio breaking you hear from the carkit?
    I have this problem with my iTech BluebandR headset and iSkin Cerulean RX. I only found this problem with iPhone 3GS but it worked fine with 3G.

  • Tomtom car kit has stopped charhing the iPhone

    A few week ago my Tomtom car-kit cable was damaged. I called support and they were incredibly helpful. A couple of weeks later I got not one but two brand new cables.
    Everything works normally except now the car-kit has stopped charging the iPhone. If I move or rotate the charger it makes contact but usually it does not work.
    I have another standard car charger which works quite well, and I was thinking that maybe one of Tomtom cables could be faulty but two out of two seems unlikely.
    Any ideas?

    No answers, I give up.

Maybe you are looking for

  • Unable to cancel supscription

    I just registered with Skype and ordered and paid for the 400 min monthlly subscription. I also ordersd the "World package" with a free trusl in the first month, but cancelled this later succesfully because there is no free calling to mobile numbers.

  • Adobe Media Encoder "waiting" status, PPro issues

    It's a good thing I stumbled upon this problem earlier today. I'm making a short tutorial for a friend using video capture software that records at 1280x800, 10fps, WMV files.  It's about six minutes long, and the final timeline in PPro has about two

  • GRC AC 10 SPM Empty Logs

    Hello Experts , Strange thing that I am observing , while obtaining FF Logs in the UI , some logs are blank while some are populated in the session details .  What could be reason for this ? The logs under "Log Summary Reports"are empty for some sess

  • Can I use table function inside Dynamic query ?

    Dear Gurus, I have following code DECLARE TYPE CRITERIA_LIST_TABLE AS TABLE OF VARCHAR2(20); OtherNoList CRITERIA_LIST_TABLE; /* CRITERIA_LIST_TABLE is index by table*/ QUERY_STRING VARCHAR2(4000); BEGIN OtherNoList := CRITERIA_LIST_TABLE(); SELECT D

  • Error 404 when attempt to download Hyperion FR Studio

    Hi, I am unable to download the Hyperion FR Studio from the official website: http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/hyperion-fin-reporting-1112-092820.html Sometime it shows error 404 and sometime shows "unauthorized re