Iphone 4 ios 6 does not pair with bluetooth on 2008 BMW 325i

I just updated my iphone 4 to IOS 6 this morning.  I got in my car and tried to pair the phone with bluetooth but it did not pair.  I removed the device from the car's memory and tried to re-pair the device but it did not function.  Can I roll back my iphone's operating system to 5.1 or how do I fix this?

I just discovered the same issue today in my efforts to get alert times synced on my iCal and iPhone after noticing a difference yesterday.  I have been using the iCloud calendar sync since iCloud first came out with zero problems.  Today I discover how terrible this sync is.  My wife and I use a macbook, imac, 2 phones and 2 ipads to enter in calendar information and we depend on a flawless sync for our work and family schedules.
First, the iCal on my iMac has default times that get applied to every singe item, even if that item had an alert beforehand.  But this default alert time is not applied as an alert on my iPhone4 calendar just the imac.  I haven't even looked at my macbook yet for fear of what i may discover.  After changing alerts and unchanging them and activating default times and deactivating them and wasting time doing this i just need to go through every event on my iphone to make sure that is now correct since I use that the most.  What an unbelievable hassle for a program that worked flawlessly beforehand.  Apple needs to recify this and have the sync work like it did before. 
I am running:
Mavericks 10.9.1
iTunes 11.1.3
iCal Version 7.0 (1835.1)
iPhone4 on 7.0.4 (11B554a)

Similar Messages

  • IPhone6 does not pairs with bluetooth head phones

    I had been using Bose wireless head phones with iPhone 4S, recently I bought iPhone 6 but now I am not able to use my bluetooth head phones as the new iPhone6 does not reads them. Would appreciate any information on how I can correct this issue. 

    Hello anilfromtokyo,
    Thanks for the question. After reviewing your post, it sounds like youare having trouble finding a bluetooth accessory. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • HT1414 My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

    My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

    Lilasil wrote:
    The message displayed suggests to return the iPhone to factory settings (which I cannot do).
    Why not?

  • My iphone 4 bluetooth does not discover any other devices or phones having bluetooth and ofcourse does not pair with other bluetooth devices or phones? How can i transfer files to other devices through bluetooth? Thanx

    My iphone 4 bluetooth does not discover any other devices or phones having bluetooth and ofcourse does not pair with other bluetooth devices or phones? How can i transfer files to other devices through bluetooth? Thanx

    you can't tranfer files with the built in program that apple gives you, you may (i belevie) download an app that allows you

  • HT201412 my new iPhone 5c does not pair with my Mac Pro via blue tooth while Mac Pro do find iPhone 5c and display paired

    my new iphone 5c does not pair with Macpro while Macpro display pairing via blue tooth and also my new iphon 5c does search other smart phones while Macpro does so

    The iPhone supports only a limited number of profiles and will only pair with a computer for internet sharing (tethering, hotspot if your cellular carrier plan supports that). http://support.apple.com/kb/HT3647

  • IPhone (3,3G,4) does not work with Apple Universal Dock.

    I have a 3rd generation iPod Touch that has been upgraded to iOS 4. My iPod Touch will no longer sync via the Apple Universal Dock. Also, my new iPhone 4 also will not sync via the Apple Universal Dock.

    Trust a geek not to give up. I decided to get to the bottom of the "iOS device does not work with the Apple Universal Dock" problem. I noticed that the iPhone 4 and iPad came with slightly different USB-Dock adapter cables. I wondered if that might be the issue. My Apple Universal Dock was connected to my Mac via the original dock adapter cables which are slightly larger. I connected the newer cables between the Mac and the Apple Universal Dock and .... voila! Both the iPod Touch with iOS 4 and the iPhone can now connect via the Apple Universal Dock. Apple changed something in the way the adapter cables function.
    Of course I still have the problem with the car head unit dock adapter ... Sigh. I'll have to call Best Buy ( uughh! ) and find out if they'll do the update for me. The were the vendor authorized installer.

  • My Sennheiser MM550-x connected perfectly with iPhone 4s.  It does not connect with iPhone 5s bluetoth.  Ayone else with this problem?

    My Sennheiser MM550-x connected perfectly with iPhone 4s.  It does not connect with iPhone 5s bluetoth.  Ayone else with this problem?

    Hey araho!
    Here is an article for you that will help you troubleshoot this Bluetooth issue:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • My i phone 3g s bluetooth does not pair with any phone

    my iphone 3g s bluetooth does not pair with any otther i phone, i pad or other phones.
    how can i solve the problem
    thanks
    sajalrm

    There is nothing to solve. Pairin with another phone is not a supported BlueTooth protocol. The exception being pairing for some multi-player games.
    Stedman

  • Add does not run with sql server 2008

    Hi all,
    My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
    On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
    we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
    is installed.
    Help needed.
    Thanking you
    Pradnya

    Hi Use this
    Dim i as integer
    i=oCompany.Connect()
    if i<> 0 Then
    msgbox(ocompany.GetLastErrorDescription ())
    end if
    the you will get the error description also use try catch wherever necessary
    Alternatively you can use
    Dim SboGuiApi As SAPbouiCOM.SboGuiApi
    Dim sConnectionString As String
    Set SboGuiApi = New SAPbouiCOM.SboGuiApi
    sConnectionString = Command
    SboGuiApi.Connect sConnectionString
    Set SBO_Application = SboGuiApi.GetApplication()
    Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
      ocompany = SBO_Application.Company.GetDICompany
    HTH,
    Atul

  • My iPhone 6 plus does not pair with 2 of my bluetooth

    There is so much on the forum, and I am not seeing the answer since I am working. I just purchased an expense bluetooth to workout with and it will not pair with my iPhone 6 plus. Is there a solution yet?

    What is an "expense bluetooth". Does it have a brand name and model number? is it compatible with the iPhone? Have you put it in pairing mode and paired it with the iPhone? Has it ever been paired with another device?

  • IMac (Mountain Lion) does not pair with Apple Remote

    Hi,
    my iMac (2009, Mountain Lion) does pair with my remote. Otherwise the remote (or remotes, I tried two) are working fine with the iMac, it just wont pair.
    I need it to pair as I have an iMac and MPB and each having its own remote (each computer should react only to its remote, not the other computer remote)
    I googled this extensively, here is what I did so far:
    - obviously, trying the normail "pair remote" procedure as the support page says
    - checking that infrared remote pairing is enabled and no other remote is currenly paired
    - restarting Mac OS
    - removing and reinsterting battery in remote
    - making sure I am an Admin
    - disabling the remote function in Plex and killing all Plex (and EyeTV and similar) processes via Activity Monitor (thought they might somehow limite the OS control over the remote)
    - tried the same with another remote (does not pair as well)
    This is very annoying.
    Can anyone help out?
    Much appreciated

    Hi den,
    Does the remote remember which computer it is paired to? I though only the computer remebers that.
    In any case, currently there is not remote paired to any computer (both computers have clean new Mountain Lion installations). And I cannot pair any remote to any of my machines. In between, I tried with the laptop as well, and it is not pairing as well. I also tried an (old, still working) third remote... nothing is happening.
    Some apps seem to take control of the remote (e.g. pressing menu start Plex on my systems). Could that be the issue? Is there a Terminal command to give Mac OS back full control over the remote?
    Or could it be something else? 'Is there an app for that' a la ForcePair.app?
    Thank you
    p.s. this is the page that I was refering to ealier, not working for me

  • HT204368 I have just got an iphone 5, and it will not pair with my Range Rover Vogue, had no problems with my iphone 3

    Hi, Help need I just got an iphone five and it will not connect with my 2008 Range Rover Vogue, my Iphone 3 no problem.

    I'm having this same issue with 2009 Range Rover Sport.  Since upgrading to the ios7 my phone connects via bluetooth but the address book does not display...Any Suggestions?????

  • Nokia E6 does not pair with Windows 8 Pro via blue...

    I installed the official version of Windows 8 Pro and now my E6 will not pair with my PC anymore. When I was using Windows 7 Home Premium there was no issues after the update, Nokia Suite sync everytime. Any suggestions?

    Hi rancebobo,
    Thank you for your post.
    It seems it is a known issue from Microsoft, see here. I suggest you get in touch with them so they can provide you with the relevant drivers.
    You can also contact Microsoft directly here.
    Sergent
    If my response has helped you in any way, show it by hitting the WHITE STAR... If you don't a MONSTER will come and eat your lunch...
    Also hit the Accept as solution button, so OTHERS can benefit from this helpful answer...
    DON'T BE SHY...

  • IOS 7 DOES NOT WORK WITH UCONNECT SYSTEM!!!!! SOME SOLUTION FRON APPLE OR UCONNECT??? (or get android?)

    since iOS 7, no iphone can pair with Uconnect system from chrysler, dodge, jeep, ram and fiat
    no answer fron apple, neither from Uconnnect
    WHAT TO DO!!!!!!!!!   android???

    I suspect there are many users of iPhones that would disagree with your broad, sweeping statement.
    Frankly, if your statement were true, there would be many others here posting the same thing and that simply is not the case.
    Regardless, these are user to user support forums.  You will not get an official response from Apple here.  If you want/need a response from Apple, pick up the phone and contact them.

  • IPod does not pair with macbook

    I'm trying to pair my ipod to my macbook. The ipod is discoverable and shows up on my macbook under bluetooth preferences. I hit the pair button and I get a message giving a passkey code that I acknowlege on my ipad. The ipad connects for a few seconds then disconnects. When I try to reconnect I get a message "Connection Failed make sure macbook is turned on and in range". What do I need to do to keep them paired?
    ipad 1.0.3
    macbook Maverick 10.9.2

    You can't. The iPad (and iPod touch and iPhone) do not have the BT profiles to pair with a computer. I think there are app available to allow some useful pairing of an iOS device to a Mac computer.

Maybe you are looking for

  • I m not able to create xml file in Java Project

    hi all, I have created one java project just to try with Ant Builder. I have created one class inside it. and now i m creating an XML file inside that project. But as soon as i try to create the File -> New -> File and give the .xml extention of the

  • [SOLVED] Remove completely Gnome and GDM (without messing MATE)

    Hi everybody, I wanted to try the new Gnome on my laptop and I installed it following the wiki with the command: sudo pacman -S gnome gnome-shell gnome-extra gdm I really like it (both the "standard" and the classic interfaces), but unfortunately it

  • I need info about Oracle classloading

    Please tell me where I can find out about Oracle app server classloading. I have done document searches on the Oracle and Orion sites. Thanks.

  • Bizarre problem - I am hearing streamed music

    OK, this is really weird and I hope someone can explain what's going on. As I type this I am listening to an internet radio station that I usually listen to on my iPhone through WunderRadio. The problem is, I haven't accessed this station on my Macbo

  • How to call and run parameters in Procedures with Sap Data Services?

    Hello Guys, Migrating'm all SSIS2008 packages for Sap Data Services. During this process I found a difficulty about running Stored Procedures (Sql Server 2008 R2) within the Sap Data Services. I need help to convert this code sample: EXEC dbo.prcInse