IPhone 4 / iOS 6 drops  bluetooth connection when I answer a call using handsfree link in car.

Honda Crosstour 2010. Handsfreelink and phone pair ok but when I go to answer a call via the talk button on the steering wheel, the connection drops and I have to use my phone to talk, rendering auto bluetooth useless. I have to manually reconnect the two to get car and phone bluetooth working again. Honda and Verizon both point to Apple as the problem...

Follow basic troubleshooting found in your user Guide for your phone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414

Similar Messages

  • After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones.  The headphones work fine with other devices.  I haven't moved to ios7 yet.  Any ideas?

    After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones.  The headphones work fine with other bluetooth devices.  I haven't moved to iOS7 yet.  Any ideas?

    What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
    And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either.

  • I have an iPhone 6Plus and i have a lag when i answer the calls

    I have an iPhone 6Plus IOS 8.3 and i have a lag when i answer the calls that happens many times and thanks  

    Hello Loay Elraghy, 
    Thank you for visiting Apple Support Communities. 
    It appears that you have a lag when you answer calls.
    If there is a pause or delay between when you answer a call and when the call connects, the troubleshooting steps mentioned in this article may be helpful:
    If you can't make or receive calls on your iPhone - Apple Support
    Sincerely,
    Jeremy 

  • HT204387 My Iphone 4S will not allow me to answer incoming calls on any bluetooth headset without selecting it from the audio source menu.

    My Iphone 4S will not allow me to answer incoming calls on any bluetooth headset without selecting it from the audio source menu.The connection works because once I do select the device...I can hear and speak. Any ideas?

    Thank you templeton peck, I just rang them, turns out my contract doesn't allow it!

  • Facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

    facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

    Apple has released a document which is reported to address the recent FaceTime issue.
    http://support.apple.com/kb/TS5419

  • My new iphone 5s doesn't have any volume when I call someone. I can see from the screen that it's calling the person, but I can't hear anything. I also can bearly hear the person when they answer my call.

    My new iphone 5s doesn't have any volume when I call someone. I can see from the screen that it is calling them, but I cannot hear anything. Also when they answer my call, I cannot hear them.

    Turn the volume up... in call volume and sounds (ring, notifications, etc) are seperate volume controls.

  • TS3406 When i answer a call they can hear me but i cant hear them until i put it on loudspeaker . How can i resolve this

    When i answer a call the person on the other side can hear me but i cant hear them unless i put the loudspeaker on. So how can i resolve this

    Hi Bignut69,
    I recommend the troubleshooting steps in this article if the microphone on your iPhone is not working:
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
    Make sure none of the microphones is obstructed by dirt or debris.
    Turn the iPhone off and then on.
    Make sure that the latest version of iOS is installed.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    You can find these steps and more information here:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Best,
    Jeremy

  • How can i stop firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages

    How can i stop Firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages
    i use Firefox 22.0 on windows 7
    it's about one week that it ask for "Network Connections" when i'm offline and disconnected from the internet even when i don't open a save page and just opening Firefox with a blank page
    Image of the Error:
    http://home.sums.ac.ir/~rowshansh/firefox.png
    http://www.sums.ac.ir/~rowshansh/firefox.png

    Did you check the network setting?
    Sounds that you have set to connect automatically when a connection is not available.
    *http://kb.mozillazine.org/Autoconnect
    *http://kb.mozillazine.org/Browser_attempts_to_connect_when_already_connected

  • 8900 curve loud speaker comes on when for 3 seconds when i answer a call?!?!

    8900 curve loud speaker comes on when for 3 seconds when i answer a call, 
    i use the green answer key to answer.
    is this something in the settings that is wrong?

    I had exactly the same problem when I first received my phone. I was using an old sim card (non 3G) which I had been using for over 3 years. To solve the issue I got a new 3G sim from the network which resolved the problem.

  • MacBook Pro dropping bluetooth connection with HP Officejet 100

    I've recently started developing problems with my MacBook Pro (OS X 10.7.4) maintaining a bluetooth connection with my HP Officejet 100 Mobile Printer.
    The problem I'm seeing is that when I send something to the printer, everything starts out okay, but then after about 10 seconds, the bluetooth icon in my status bar indicates that it is no longer connected.     The printer pauses for a minute or so and then spits out the half-printed page.
    Anybody else seeing this?   Any suggestions on how to fix?

    I have a similar issue, albeit a different bluetooth printer from yours.
    According to a review on CNET's website, the dropping of bluetooth connections seems to have been introduced in the 10.7.4 update and did not exist in the 10.7.3 version of the Mac OS X Lion software.
    MacBook Pro with Mac OS X 10.7.4 (Lion)
    Canon Selphy ES30 with Canon BU-30 USB bluetooth adaptor

  • Anyone had an issue on iphone 4s where bluetooth connects one day and then the next will not discover anything, but then a little while later it works again?  I have 2 audio devices and an apple keyboard that I have this issue with. Effects ALL.

    I have an iphone 4s.  A while ago it started having issues with bluetooth.  All of the sudden, an audio headset I am using quits working with my iphone bluetooth.  I check and my iphone doesn't see any of my bluetooth devices.  I have an apple keyboard, a headset, and a speaker.  Nothing shows up on my iphone but they all connect perfectly to my ipad.  Then a day or so later it works again. The are all suddenly there.  I just installed iOS7 and I'm still having the same problem. What is UP?  Anyone have a clue what is going on?

    I have this problem too. I have an iPhone 4, and this wasn't a problem when I bought the phone back in December. I think it came a month or so later and I suspect with a standard upgrade of something like itunes, or iphone software... but I can't pinpoint it to any specific update as it took me a while to notice it. For me, it does this with my work calendar which is run through Microsoft Outlook. But it's the exact same thing - and it means my calendar isn't reliable anymore.
    I've made sure the time-zone settings are correct, I've updated all software, and gone through all possible settings for both my i-phone and Outlook. Nothing fixes the problem, even our tech guy at work didn't know what to do. I know it's not just my phone as the exact same thing has happened with my boss's iPhone which is an iPhone 3G, and it frustrates him to no end.
    I'm really hoping someone at apple can tell us what's going on, especially since it never used to do this and there doesn't seem to be any way to fix it. If someone thinks they know what itunes update this was due to, let me know - I'll see if I can go back to that older version.

  • IPhone to Macbook Bluetooth connects then after 2 seconds disconnects.

    Well the subject line pretty much explains it all...
    My macbook is able to detect my iPhone but the iPhone just keeps searching indefinitely, if I configure a new device I get the "passkey" screen on the iPhone, I click connect and it does for 2 seconds then disconnects. It adds my Macbook to the list of bluetooth devices but it never "sees" it...
    I can see it on my System Preferences Bluetooth window, that the light goes from red-disconnected to green-connected when I tap on my Macbook in the list but after about 1 second the light goes red again...
    Any ideas?
    ps: my iPhone and Macbook are about close enough.

    Guys,
    Take a look in the Iphone console messages when I'm trying to connect my Iphone with my Mac Book Pro by Bluetooth.
    I got the console messages using the Iphone configuration Utility 2.0 available in the Apple site.
    ===========================
    Thu Jun 18 23:19:25 unknown Preferences[332] <Warning>: BTM: connecting to device 0x19dbf0 Marcelo Castanho\M-b\M^@\M^Ys MacBook Pro 15" 00:16:CB:2C:B5:70 0xfa8e0003
    Thu Jun 18 23:19:28 unknown MobileBluetooth[28] <Notice>: PairingManager::reportExternalPairingFailure can't find device
    Thu Jun 18 23:19:28 unknown MobileBluetooth[28] <Notice>: HandsfreeService : Device is not supported
    Thu Jun 18 23:19:28 unknown MobileBluetooth[28] <Notice>: PhonebookService : Device is not supported
    Thu Jun 18 23:19:28 unknown MobileBluetooth[28] <Notice>: A2dpService : Device is not supported
    Thu Jun 18 23:19:28 unknown MobileBluetooth[28] <Notice>: RemoteService : Device is not supported
    Thu Jun 18 23:19:28 unknown MobileBluetooth[28] <Notice>: WiAPService : Device is not supported
    Thu Jun 18 23:19:28 unknown MobileBluetooth[28] <Notice>: NetSharingService : Device is not supported
    Thu Jun 18 23:19:28 unknown MobileBluetooth[28] <Notice>: GamingService : Device is not supported
    Thu Jun 18 23:19:28 unknown Preferences[332] <Warning>: BTM: serviceEventCallback: service = 0xffffffff eventType = 0 event = 11 result = 305
    Thu Jun 18 23:19:28 unknown SpringBoard[23] <Warning>: BTM: serviceEventCallback: service = 0xffffffff eventType = 0 event = 11 result = 305
    Thu Jun 18 23:19:29 unknown com.apple.mDNSResponder[16] <Notice>: _btServiceEventCallback: serviceMask = 0xffffffff eventType = 0 event = 11 result = 305
    Thu Jun 18 23:19:29 unknown Preferences[332] <Warning>: BTM: received BTSERVICECONNECT event type with 0 currently connected services
    Thu Jun 18 23:19:29 unknown SpringBoard[23] <Warning>: BTM: received BTSERVICECONNECT event type with 0 currently connected services
    Thu Jun 18 23:19:29 unknown Preferences[332] <Warning>: BTM: posting notification BluetoothDeviceConnectFailedNotification
    Thu Jun 18 23:19:29 unknown SpringBoard[23] <Warning>: BTM: posting notification BluetoothDeviceConnectFailedNotification
    ===============================

  • DroidX dropping Bluetooth connections with 2010 Honda Accord

    I hope soneone has an answer for this one.
    My phone drops the bluetooth connection with the HandsFreeLink in my car (2010 Honda Accord w/Nav) after a period of time (20-30mins).  The phone call is still active.  Only the bluetooth connection is cutoff.  The car will not recognize the phone until I either shutoff and restart the car or pull the battery on the phone and reboot it.  This does not happen with my wife's motorola flip type phone.
    Any help would be appreciated.

    Thank you all for posting your questions and concerns!
    I can imagine how frustrating it gets when experiencing the Bluetooth connection problems!  Just want to let everyone know our Product and Bluetooth Team are aware of the issues with connectivity since software update, and are working diligently to provide a permanent fix as soon as possible.
    We will keep you updated!
    Thanks for your patience, and for choosing Verizon Wireless!

  • 6350 keeps dropping bluetooth connection

    My new 6350 was easy to connect with my Motorola H790 bluetooth headset.  However, if I talk for more than about a minute, it drops the connection.  When I try to reconnect, the phone cannot find the device.  The only way that I can get it to reconnect is to delete the device and start all over.  If I have a long drive, this could take place several times, such that it is probably a lot safer for me to just hold the phone in my hand.
    Does anyone have advice for this situation?

    I have the same problem with a Chrysler 30C UConnect system.  The 6350 intermittently drops connectivity.  AT&T replaced the 6350 with a new one, but it also drops connectivity.  Chrysler checked and I have the latest updates for the UConnect.  My old Motorola mobile phone never dropped connectivity so the Nokia 6350  has a serious issue.  At this point my only option is to junk the 6350 and purchase a different brand of mobile phone, an expensive option, but I need a mobile phone with reliable connectivity.

  • Droid Pro dropping bluetooth connect

    Issue: Droid Pro seems to drop its bluetooth connection with late model BMW very often. Will cut a call with no notice. User had no problem with previous phone in the same vehicle (BBerry 8830). Anyone experienced this issue? More importantly... is there a fix?
    TIA

    Hello Community members
    I know how important hands free kits are. I also know that some automobiles aren't as up to date as our new devices.
    I've checked the BMW's website and the Droid Pro at this time isn't listed as a Bluetooth compatible device. Here's also a link of blue tooth car kits that are available for your current device. I would contact the automobile dealership to see if they are going to cover the device and when.
    Thank you

Maybe you are looking for

  • Unable to open the reports as url using web.show_document

    Hi experts, I am trying the access the oracle reports from oracle forms. my forms is running at port 9001 and my report is configured at port 9002. While trying to open the report using web.show_document(), the web page opens with port 9001 and retur

  • MapViewer 10.1.2: Interactive SVG in a JSP page

    Hello everyone, I'd like to be able to embed an interactive SVG map in my JSP page (similar to the mapinit/svgmap demo). What is the simplest way to do it? Is there a JSP tag that would render a map with all javascript? I'd like to avoid having lots

  • Change title of portal

    Hi all, does anyone have an idea how and where to change the title of the portal "SAP Enterprise Portal 6.0"? Thanks in advance Martina

  • Which installation option is best?

    I was wondering what the best installation option is for me. I've read about "Archive and Install," "Upgrade," and lastly completely whipping the HDD and then installing. I have a MacBook Pro(the original - 1st Gen), and I currently have 33.94G used

  • Error during step C3 Load Master Data of report /SAPAPO/OM_LC_UPGRADE_70

    We are upgrading from SCM 5.0 to SCM 7.0. We have tried to run step C3. Load master data but it keeps displaying a red light with "Jobs for creating master data terminated". Messages in the job log are as follows: Message text