Iphone 4 IOS6 crash
Hi,
after I updated my iphone 4 from 5.1.1 to 6,0 i'm expiriencing problems with my phone. It crashes constantly. I can't even enter adress to safari, or read an e-mail, or send a massage. It is really annoying. My screen just becomes dark ( i can see apps; like someone turned of brightness) with one thick line (red or yellow) and than my phone reboots. After it turns on, it reboots again. I tried DFU mode, but it didn't help. I don't know how to send crash report. I have like million of them:
ResetCounter-2012-10-06-225630.log
Incident Identifier: 6D83AF5B-454E-4858-A61C-130AE559E96F
CrashReporter Key: b03b1331354a2e49f158ba32175734b5658e65da
Date: 2012-10-06 22:56:30 +0200
Reset count: 1
Boot failure count: 0
Boot faults:
Boot stage: 0
Boot app: 0
I reseted my phone, didn't help. I did via itunes, but sometimes, i can't do it because my phone reboots.
I do not know how to solve this problem. It never happened to me before...
EDIT: my phone has never been jailbroken, and will never be.
Please, can ANYONE help me. I posted this on so many sites, and no one knows what is the problem!
And i can't contact apple support because i don't have warranty anymore! Please, help me anyhow!!!
Similar Messages
-
BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition
Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
End result, a successful restore to factory settings and a happy 14 year old.
Hope this helps others. -
Since I have updated my Iphone to iOs6 my Iphone crash. I had already done a reset and a new installation.
Thank you!! I ran through so many troubleshooting guides and never saw this exact procedure. This is the only one that fixed my problem.
Too bad I lost all the data in each application, but I can live with that. -
I am trying to save memory on my iPhone 4S/ ios6.
1) Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?
2) Can I back up the newsstand to iCloud and save memory on the iPhone?
3) Can I back up the bookshelf to icloud and save memory on the iPhone?1. What format is the external drive? It sounds like it's ina format that Macs can't write to. Is it a NAS or NTFS?
2. Easiest thing: just move your iPhoto Library to the external
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
my iphone 5 keeps crashing all the time and has a delay of about 3 seconds when doing anything on it i did a factory restore on it but it didnt fix the problem i went to optus to see if they could help me as my phone is through them but they knew nothing i need help please my phone is only 8 months old
Plug the device into a wall outlet and leave it for about 20 minutes. If it has not powered on at that point try a reset by pressing and holding the home and power buttons for about 15 seconds until the white Apple logo appears.
-
Dictation is not working in the reminders app on iPhone 4s IOS6. The microphone is grayed out. How do I re-enable the microphone?
One day I tried to dictate a note and discovered the microphone was grayed out. As someone suggested I did a hard reset of my iPhone 4S and that didn't solve the problem.
Then I had an epiphany. I use the Notes app a lot and have a lot of Notes stored in the app. I tried deleting some of my many notes and "viola!" the microphone is black again. My guess is the app has some kind of storage limit and when you hit that limit, the microphone is automatically turned off. Anyway, that's my theory and I'm sticking to it.
Hope this helps. -
My Instagram app on my iPhone 4s keeps crashing whenever i try to open it. I want to delete it then download it again but it said that doing so would delete all of it's data. Does that mean I'll lose all of my pictures?
I have this excact problem too, Deleting the the app and then reinstalling it won't delete your photos as they are stored on facebooks servers. You will just have to remember you username and password to sign in again. Ever since Facbook bought instagram i have had this problem on my 4S too.
-
my iphone 4g has crashed. itunes doesn't seem to recognize it and wil not let me restore it. i have updated all software and there are no anti-virus apps/software on the macbook that this phone syncs with. i do get an error message on the phone that says something like the accessory is not compatible but I have no accessory for the phone other than the apple chargers and ear buds. any thoughts?
The possible fix for the "this accessory is not compatible" is to carefully clean the dock port with isopropyll alcohol especially the pins which are on top of the mid rib. Be firm but do not break anything. Let it dry for a minute. See if that helps, if not try to clean one more time. If problems persist might need to Visit Apple.
-
Iphone with ios6 as a remote for apple tv - song sometimes skips
I use iphone with ios6 as a remote for apple tv but sometimes a song skips while playing. What can I do to stop this? Very annoying as I'd like to use it for a party. Thx
Sure.
https://itunes.apple.com/ca/app/remote/id284417350?mt=8 -
Itunes (10.6.3) doesn't recognize my Iphone 5 (iOS6). Can somebody help me? thanks!
itunes (10.6.3) doesn't recognize my Iphone 5 (iOS6). Can somebody please help me?
I have a Macbook with the latest version of Itunes (10.6.3) and I just bought the new Iphone 5 with the latest operating system on my iphone (iOS 6)
I'm from Amsterdam, The Netherlands.
I already tried another USB-portal. I tried restarting my macbook.....what could be the problem?
I hope to hear from you...
Thanks!ok believe it or not....but I found the answer and everything works now!!!:
Once again hanks for the help guys!
Symptoms
In rare circumstances, an iPhone, iPad, or iPod touch may not be recognized in iTunes on Mac OS X v10.6 Snow Leopard after the Mac is restarted. If you reinstall iTunes, your device may be recognized. However, restarting your Mac may result in the device not being recognized again.
Note: These steps do not apply to OS X Lion or Mountain Lion.
Resolution
Follow the below steps to troubleshoot the issue.
Note: Some of these steps will require that you enter your Mac OS X user password. If you do not know your user's password, follow this article first.
Install all software updates. If you have an update available for an SDK (Software Development Kit), be sure these updates are also installed. Do this by clicking the Apple () menu, choosing Software Update, and following the on-screen instructions. If you need to download iTunes manually, you can download it here.
Disconnect the device and quit iTunes.
In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears:
/System/Library/LaunchDaemons
Click Go.
Locate the file "com.apple.usbmuxd.plist~orig" and drag it to the Trash. (Do not move the similarly named "com.apple.usbmuxd.plist" file to the Trash.)
Restart your Mac, open iTunes, and connect your device. If your device shows up in iTunes, restart your Mac one more time and confirm the issue is still resolved. -
While in Japan on a trip, I updated my iPhone to iOS6. Now, when I try to update my apps, I'm told that my account is not good in the Japan store I must switch to the USA store. How do I do that so I can download and update apps at home in the USA?
Your Apple ID is tied to the US store. Log out of the store, then trying logging back in.
-
The original computer that I began syncing my iphone to has crashed and I now have a new computer. I need to know if anyone can help me? How do I sync my phone to the new computer and tell it that it's now going to be my primary computer instead of the old one? There has to be a way, viruses effect computers all the time and they crash so I know I can't be the only one.
Than youYou should be able to recover the media with the tips in this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That might switch the assocation of the device to the new machine but I couldn't say for sure.
tt2 -
pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.
Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc. -
the camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???
Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.
-
My new iPhone 4S has crashed 7 times ie the screen does not come back on when I press the home key. I hold down the home key and on button to reboot and it always comes back. I tried a restore but it has crashed once since. Is this right ? Do I have a faulty phone ? Any suggestions ?
Does the screen come back on if you press the sleep/power button?
Have you tried powering down (hold sleep/power button and swipe red slider) then power back up? Power cycling sometimes will clear problems.
If neither works, and you can get to an Apple store, have the genius bar folks try it out...they are very good about replacement if faulty.
Maybe you are looking for
-
Design Problem When SSIS Get String From Web to Do Fuzzy Lookup
Hi! In my previous post Search Data by Fuzzy Lookup in Real Time Scenario, I've tested required functions to build a sample website and SSIS, now it's time to polish my design. Since user will query a name from Web, SSIS is supposed to get a string t
-
Function Module to pull in variables based on a source variable
Hi, I am new to user exits and function modules and don't know any ABAP, but I need to make use of a user exit to pull in 4 cost center values (0COSTCENTER) based on a single profit center (0PROFIT_CTR) value. For example, in the planning layout use
-
Is there any plug-ins for static code analysis in Jdeveloper
Hi, Is there any PMD, check style and static code analysis plug-ins available for JDeveloper? Those are available for Eclipse. How to achieve that in the JDeveloper? Regards, Raghu.
-
How to view changes using SVN plugin for SQL developer
Hi, We recently moved to SVN. I have checked out the PL/SQL code from the SVN server to my local C Drive. But after I have made changes to couple of PL/SQL files, I am not able to figure out how to see my changes and compare with the checked out vers
-
I have the following stored procedure to get images from the database to into my asp. PROCEDURE GETIMAGE ( ord_procedure_path in varchar2, http_if_modified_since in varchar2, http_status out varchar2, http_last_modified out varchar2, http_redirect ou