IPhone 4 is fully charged but does not turn on

I've tried a hard reset by pressing and holding both the power button and the home button on numerous occasions for different durations, and nothing. I've tried to plug it back into an outlet, and nothing. I tried plugging into my Macbook and iTunes doesn't even read the phone, still nothing. My phone was fully charged when I took it off of the charger (around 1:50 a.m.) Sunday morning, November 7, 2010 (daylight savings) and I'm not sure if that could be the issue. Please help.
My phone is basically dead and unresponsive to all of the troubleshooting I have read about.....

Hi Ive just had the same problem,I was playing a gamy 'my farm' & i put my iphone 4 down to answer door then when i picked it up the iphone was black screen & no power,i did plugin to itunes & the wall plug but nothing,then i held the power & home buttons down for about 6 seconds & the apple logo appeared.I really freaked,its ok right now but im phoning my apple store becoz it had 77% battery so theres something wrong with this iphone 4.
I changed my 3gs 4 times & my original 2g 5 times,I just dont have any luck with iphones,now im worried its gonna do that again ,the game 'my farm keeps dropping out & saying no internet yet my internet connection is strong & fine,looks like we have the same problem even wen i plugged it into itunes it didnt recognise the iphone,i hope u get yours sorted

Similar Messages

  • HT201401 my iPhone is fully charged but will not turn on at all ?

    my iphone 4 is fully charged but will not turn on ?

    Welcome to Apple Communities
    Hold Home and Sleep buttons

  • My ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    See Here  >  Device Not Recognised  http://support.apple.com/kb/TS1538

  • Mac book pro fully charged but does not power on

    My Mac book  pro is fully charged but does not power on.No lights sounds...nothing!

    try doing SMC reset, the following article tells how:
    http://support.apple.com/kb/HT3964
    if it still won't turn on try the following article:
    http://support.apple.com/kb/TS1367
    if neither of this helps i would take to apple store or apple service provider and have it looked at for possible repair.

  • Unresponsive Satellite L55t - charges but does not turn on

    Hello, I turned on my laptop and the backlight lit up but there was no display. I could hear it turning on and the indicator light came on. When connected to an external monitor, the display was just fine. I did some research, opened it up and disconnected and reconnected a few things (which I do often) and closed it back up. When I tried to turn it on this morning it was unresponsive. When connected to the ac adapter the charging light will turn on but the power button does not turn the laptop on. I desperately need this laptop for school, it's beyond it's warranty and I don't have the money to get it serviced. If I can find the source of the problem I'm open to replacing said part as long as it's not more expensive than sending it out to Toshiba. I've since taken the entire thing apart. The only things connected are the motherboard and CPU, both of which I've taken out and cleaned (fan was gross but I digress). I'm handy enough to be able to put it back together correctly and I know the basic parts, but I was hoping that someone could walk me though some troubleshooting as I put it back together. Or if that's not how it's done, maybe someone can help me take it apart in the right order so I can isolate the problem part. I have high hopes that it can work again (as it was powering up just fine a couple days ago with the exception if the display problem) I'm just not sure how to go about getting it back to that point. Thanks in advance for the help!

    pikeno300 wrote:
    It is experiencing the same problem in my l55t b5330. Please need a solution!Your support site is here.  We don't know what exact model number the OP had as he/she did not specify.   The OP was experiencing one problem, then took computer apart and put back together and then began experiencing a different (albeit similar) problem.  Why don't you start from scratch and describe exactly what is going on with your computer as I'm pretty sure the OP will not be back.

  • My iphone is fully charged but it will not turn on unless plugged into a charger

    my iphone is fully charged but it will not turn on unless plugged into the charger in the wall, it wont even turn on when connected to the computer!!!!!!!

    Hi there. Any luck with your phone? I'm having the same problem

  • My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

    My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

    My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

    Hi there Graham!
    I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
    iTunes: Purchasing and viewing HD videos
    http://support.apple.com/kb/ht3209
    Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718
    Hope that helps. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • HT1414 my iphone 4g just shut down. i was just using it a moment ago then when i saw it's already off. i tried to turn it on but won't budge. i attached it to charger but still not turn on.

    my iphone 4g just shut down. i was just using it a moment ago then when i saw it's already off. i tried to turn it on but won't budge. i attached it to charger but still not turn on.

    Charge it for 15 minutes with the wall charger. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears.

  • Just received a ipad2 it is fully charged but when I turn it none or the icons show up...only itunes.  It is a iPad2 wi-fi 3G .

    I just received a iPad2 Wi-Fi 3G 32GB, it is fully charged but when I turn it on no icons appear except Itunes and a connect cord.  What am I doing wrong?

    The screen that you see is trying to tell you to connect the iPad to iTunes on your computer with the cable that came with it. ITunes will then walk you thru the setup steps. Make sure you download the latest version of iTunes before you connect your iPad.
    Online iOS 5 / iPad user interface guide:
      http://help.apple.com/ipad/5/interface/
    Online, downloadable PDF iOS / iPad user guide:
      http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
    Or you can download the free iOS 5 / iPad user guide from iBooks.

  • IPhone 4s bluetooth connects but does not work handsfree

    My iPhone 4s bluetooth connects but does not work handsfree.  Has worked fine with My iPhone 3s.  The Light on my VW turns green indicating a connect, but the phone does not work through the VWs audio.

    Fixed by power cycling the iPhone

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My ipod will charge but does not show in itunes or windows

    I tried to use my ipod as a disk to transfer my itunes library from my desktop to my notebook (both Dell), now my ipod charges, but does not show up in itunes or on either of my computers. I have used the advice of going to control panel and unchecking the box under power management but that didn't work, CAN SOMEONE PLEASE PLLLEEEEAAAASSSSSSSEEEEEEE HELP ME?
    I have windows xp on one and vista on the other, if that helps.

    This worked for me, don't know if it will for you. Have ITunes open. While IPod is connected to computer press(at the same time) the menu and center buttons until your screen goes black and shows the apple icon then immediately press the forward button. Your IPod should show up. It won't hurt to try it, even if it doesn't work. Hope this is of some help to you.

  • How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

    How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

    It has always been very basic to always maintain a backup copy of your computer.
    Did you fail to back up your pics?
    The photo sync is one way - comptuer to ipod.
    You can e-mail them to yourself (instructions in the manual), but they will not be of the original quality.

  • Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.  See if that clears the glitch.

Maybe you are looking for

  • Help needed with Windows

    Hi All Hope you can help as i am basically a Linux user who has a new laptop, Lenovo G700. I will be putting Linux on eventually but until then i have decided to have a go with Windows and have got ...... nowhere. I have done all the windows updates

  • Migrate from Lightroom 3 to Aperture 3 - Problems with DNG

    Hello : ) I will migrate from Lightroom 3 to Aperture 3. I've tested Aperture for a while and I like it, but I have one problem. If I import DNG files, I lost all the settings I've made in Lightroom, except Metadata. Is there any way to import DNG fi

  • How do I update IPad 2 to ios6.0?

    iI've upgraded my I. Pad, and gave my husband my 2. He has been trying to download the Facebook app, and keeps being told he has to upgrade to iOS 6.0. I thought I just did that! with credit card payment and all! and it still doesn't download....help

  • Access key for ABAP

    Hi all, I need to create program of ABAP. It need access key for creating. How to get access key? Please advice, Duypm

  • Aperture 3.6 will not start after new install

    Rebuilt my Mac Mini with a clean install of Yosemite 10.10.2 and reinstalled all my apps. Downloaded and installed Aperture from the App Store but it will not start. No crash, just nothing. Does its animated thing when double-clicked in Finder, and g