Iphone 4 jumping and stopping tracks while playing then shows voice memos

i updated my iphone 4 to iOS 4.3.5 and since then, whenever im playing music on ipod, it randomly jumps or stops playing tracks altogether. how can i fix this, please help me

Settings>iPod>Shake to Shuffle>OFF

Similar Messages

  • Iphone 4 disconnecting and connecting repeatedly while playing music on PC

    I've been having this problem from day 1 when trying to play music on my pc before I add it to my iphone while its hooked up to my windows 7 pc, it just starts disconnecting and connecting over and over again and as soon as I stop playing music its fine. Does anyone know how to fix this? It's very annoying...

    No one?  I have a hp dv7-3085dx if that helps...Please help.  People at the apple store didn't even try to help me when I asked...

  • Has anyone else experienced the stopping and starting again while  playing music in iTunes.  It was fixed but with the last update it has started skipping again.

    Has anyone else experienced the stopping and starting again whil playing music in itunes.  It was working fine wit the prior fix, but after the last update
    it started skipping again. 

    Try it in another vehicle see if it still happens, at least you can narrow it down to your  phone or the car. My 4s play totally fine, I have never had any of those issues. Maybe its time to restore your phone and start over. I would also have someone else play their Iphone in your car, see if it happens to them. Or try yours in someone elses car. Good Luck!

  • My Ipod classic stopped suddenly while playing on the dock. On checking it said connect to iTunes to restore and the battery had also exhausted itself. On connecting to iTunes it kept displaying the message Do Not Disconnect. It never worked after that.

    My Ipod classic stopped suddenly while playing on the dock. On checking it said connect to iTunes to restore and the battery had also exhausted itself. On connecting to iTunes it kept displaying the message Do Not Disconnect but showed the battery getting charged. Sometime later it said OK TO DISCONNECT. It never worked after that. Please help /guide to restore...

    Hello Harrywahi,
    Sorry to hear about the trouble you are having with your unresponsive iPod classic.  I found a resource that I think would help in a situation like this.
    I recommend following the steps in this troubleshooting assistant:
    iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx

    I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx

    That is HANG sorry miss type

  • My ipod jumps, skips and slows down while playing songs. It is very annoying.

    My ipod jumps, skips and slows down while playing songs. It is very annoying. Is it fixable??????

    I have the same problem. Often, the songs worked perfectly fine before, even the previous day! Changing the format does not help either, nor does restoring iPod settings. In another case, a song WILL work after settings are restored, but after a few plays will return to its old state of making the ipod reset.

  • Jumping to the track being played

    I'm doing some housekeeping on my iTunes in one playlist A At the same time I am listening to music in playlist B. Every time a new track comes up, iTunes jumps to that track in playlist B and I then have to go back to playlist A and find my original place it in. It's driving me mad and I'm sure it didn't behave like this in the past. Is there a way I can stop it happening?
    Fiona

    Well, maybe I don't get the iTunes DJ function - But I want to avoid having to deal with an extra window where I would have to add tracks to a playlist - because I'm exploring unknown music as well as managing list info (names, art, etc...) and wouldn't know what to add before I even stumble across tracks to peruse as I scroll through the main list - and I don't want iTunes to go randomly selecting things either. I simply want to be able to work through the main list and select tracks to play at my leisure while I scroll and then not be jumped back after I have scrolled away when I might well want to let the next song play -or to pick another song from where I happen to be at after the last song ends (without having to pick a new song before the last one ends)... I never used the DJ function, so I'll look into that more, but it doesn't look like that really solves this issue either.
    Thanks anyway though.

  • New ipod nano stopped working while playing will not even turn tried to charge it still nothing HELP!!!

    new ipod nano stopped working while playing will not even turn tried to charge it still nothing HELP!!!

    Change the rice and dry for another couple of days. Then:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Apple will exchange your iPod for a refurbished one for $199 if 64 GB one and $99 for the other 4Gs.. They do not fix yours.
    Apple - iPod Repair price              

  • Jerky Vioeo 4 few seconds and freeze it while play audio ok..

    Thank all for ur input. The main problem is when I grab video clips from the desktop to the project window and play back on monitor of CS4, I get jerky video for few seconds and freeze it while playing audio perfectly up until to end of the clip. I have tried the same thing with APPro 1.5, the same thing has happened. When I play the SXS card thru Sony XDCAM EX1 on the Televion, I could not find any jerky video there. I have set the XDCAM EX1 and PProCS4 for PAL/HQ/1080i/25fps. Any other suggestions to try out.. Thx
    Pushpa
    e-Mail: [email protected]

    I assume that the "desktop" is your C:/  drive and assume that is where you also run your Adobe application from.
    Thats asking for exactly the issue you are experiencing.
    PPRo needs multiple drives and setups to run correctly.  Check the setup and specs required for the application.

  • HT201210 my iphone is suddendly got switch off while playing game . now how to resolve this problem

    my iphone is suddendly got switch off while playing game . now how to resolve this problem

    please iphone guide me how shall i restart my phone

  • I am getting a service start and stop alert while doing the windows server updates.

    HI
    I am getting a service start and stop alert while doing the windows server updates. Services are wmiApSrv , WPDBusEnum. Can you please help me to under stand why i am getting the service start and stop alert.
    Thanks & Regards
    Abhilash K Joy

    Hi,
    The WMI Performance Adapter (wmiApSrv) service provides performance library information from Windows Management Instrumentation (WMI) providers to clients on the network. This service only runs when Performance Data Helper is activated.
    This service is installed by default and its startup type is Manual. When started in the default configuration it will log on using the Local System account.
    You can try troubleshooting the issue using Clean Boot to check if the issue is related to third-party software.
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135/en-us
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • When my iphone 3G dies, and i plug it in, it shows the apple sign but never turns on ???

    help me! when my iphone 3G dies, and i plug  it in, it shows the apple sign but never turns back on !!!!!!

    When the phone shows only the Apple logo it usually indicates an issue with the system software that is preventing the phone from completing the boot sequence. This can be remedied by putting the phone into DFU mode and restoring the system software. This will remove all data and software from the phone and put a fresh set of system software on the phone, so hopefully you have a recent backup.
    To put your iPhone/iPod into DFU mode:
    1. Make sure the iPhone/iPod is connected to the computer
    2. Hold down the sleep/wake button and home button at the same time for 8 seconds
    3. Let go of the sleep/wake button and keep holding down the home button
    4. If you are successful, a dialog box will pop up in iTunes stating that iTunes has detected an iPod/iPhone in recovery mode. Note that a successful DFU will result in a blank black screen on your iPhone/iPod.
    5. Click OK, then click the restore button in iTunes.
    After that you will be able to resync your data and be good to go.
    Hope this helps.

  • Is it a common occurance for an iPad 4th gen to just blank out and stop working?  The screen shows nothing at all, no sounds but it registers on my computer when connected.

    Is it a common occurance for an iPad 4th gen to just blank out and stop working?  The screen shows nothing at all, no sounds but it registers on my computer when connected.

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • How do you transfer voice memos to your pc?  I have synced my phone a number of times and everything updates with the exception of voice memos?

    How do you transfer voice memos to your pc?  I have synced my phone a number of times and everything updates with the exception of voice memos? Also, my voice memos are checked to be synced everytime my phone is synced. 

    Voice memos, once correctly synced, will appear under your Music Library.  Can you go through your music library to check?

  • I was watching something on my iPad then it suddenly turned off I put it in charge and it turned back on then showed the home screen then turns back off quickly so I can't restore it

    I was watching something on my iPad then it suddenly turned off I put it in charge and it turned back on then showed the home screen then turns back off quickly so I can't restore it

    Hi there iPad 3rd Generation,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

Maybe you are looking for

  • 2 Sites don't work on iPhone but SHOULD + more problems = no complaints?

    For informative purposes only... Long story short, I made a call on the iPhone and arranged to meet an individual at a specific location and call them when I arrived there to complete rendezvous. I first received their email from my .mac email on my

  • Does anyone know whether BT has a mail server that...

    Does anyone know whether BT has a mail server, other than mail.btinternet.com, that supports only POP3/SMTP and not IMAP?  For those interested, the background is as follows. I've been trying to get my iPad Mail client to connect to mail.btinternet.c

  • Photoshop CC File Associations revert to CS6

    Photoshop CC: PSD File Associations revert to CS6 in Finder>Get Info - Mac. File associations in Bridge manually updated and are working, but Finder still reverts to CS6 when changed in the Get Info window of a .psd file.

  • RAID card battery conditioning - "Battery failed (other than expired)"

    OK, so if you log-in using the GUI, you get a warning telling you that battery conditioning is happening and that you shouldn't the server. However, if you log-in over SSH, as you might, for instance, with a headless Xserve, you don't get that warnin

  • CEF/Point to Point link in ASR 903 not working

    Hi there,  I have been having some issues with ASR 903 connected to a OLT and upon further testing in the lab I came across a strange issue.I have R1 and R2  connected directly on the p2p link Tengig interface.I have configured below ips but somehow