IPhone 4 lagging like crazy after iOS7

I dont understand why this happen...  i try google almost every single thing on the net. But only to avoid further lagging...
I cant take it, i love my phone when i was using iOS6, there were no such problem that like this lagging.... Please telll me what to do?
Alot of my friend suggest to jailbroke and downgrade then ioverclock the phone.... i really need some advise, any way to downgrade officially or totally eliminate the lagging...
APPLE... START BUILD QUALITY PRODUCT AGAIN!!!!

no ios device ever supported any type of official downgrade of ios
I have an iphone 4 16GB about 1.5GB free and it run as good as it did with  6.X
try restarting it and maybe stopping program running in the background you dont need
you restart it like this
http://www.apple.com/support/iphone/assistant/phone/#section_1

Similar Messages

  • Why is my iPhone 4 not ringing after iOs7 update?

    Why is my iPhone 4 not ringing after iOs7 update?
    I checked volume on side & n settings & rebooted

    Hello there Tgurnell
    Thank you for using Apple Support Communities.
    It sounds like the ringer is not ringing after the update to iOS 7.  I found an article with some steps to take when you are experiencing issues like this:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Sterling

  • Skype lags like crazy

    So firstly my older version of Skype just refused to connect. I tried everything and one of these was to upgrade to the lastest one which shows Skype 6.22 in my remove programs list.
    Now it connects, but it takes up about 33% of my CPU and just locks up and lags and goes into not responding. It does run okay for a while and then just all of a sudden increases CPU usage something crazy. Restarting it makes it okay for a few minutes again and then same cycle.
    How do I fix this?
    Even when I try to downgrade to a later version it doesn't allow me into group chats even though single chats work. I can't leave the group or remove it to be added again. The other people say I am still showing as in there.
    Is there anything that can fix this? In general Skype lags at times and is slow and seeming as if every now release is making it worse. 
    I am using Windows 8.1 latest update with the lastest update Skype.
    Any suggestions here?

    This is on my work laptop. So I am kind of stuck with this piece of blergh they gave me...
    The weird thing is the pc performs fine and everything else runs fine.
    It is JUST  Skype Desktop version that lags.
    I have now been forced to use this Windows 8 Skype abomination.
    I even tried 4 different versions and did all the temp file removal and Skype setup _old thing.
    When I use old versions I just can't be added to group chats at all and when I use the latest deskptop one it lags like crazy. Sigh... How is a popular program like Skype THIS buggy?

  • IPhone 4S shutting down after iOS7 and support from Apple Chat

    So, my iPhone is shutting down suddenly with battery at about 40% and saying that it ran out of juice, asking me to plug in the charger. When I do it, it shows 40% again. It looks like other people have similar issues with not only the 4S, but iPhone 5 as well.
    I tried to contact the char support and well, read by your self below. Not only nothing was solved, but the support just hanged up the chat on me, and didn't answer my last question. That's really not what I expected from Apple. Well, that's it, no more iPhone in my household.
    Case ID is 537464016 in case anyone from Apple wants to check it out. I'm selling this iPhone and never coming back.
    Now Chatting with Calvin
    Thanks for contacting AppleCare chat support. My name is Janan. Please give me a moment to look over your information.
    Please note:  In the event that we get disconnected it's likely due to a system or connection issue. It is never our intent to disconnect from you.  If you do get disconnected, please chat us back or go to [Contacting Applehttp://support.apple.com/kb/HE57http://support.apple.com/kb/HE57] for phone support numbers and refer to the case number on the email that you've already received.
    Hi Janan
    Hi Luccas, how are you doing today?
    Good thanks. I have an issue with my iPhone 4S
    Luccas, from what I see in the pre-chat notes you provided, it looks like you are having an issue with Battery life. Is this correct?
    Since I updated it with iOS7, the phone is shutting down suddenly when the battery is below 40%
    I wait then about 10 min, or I do plug in the charge, and the battery shows 40% again
    I tried to restore the phone using iTUnes
    twice
    but the issue is still happenning
    Did you set up your phone as new after restoring?
    yes
    How long until the unexpected shut downs started up again then?
    straight away
    I found your diagnostics… Give me a moment to have a look?
    ok
    Ok, there may be an issue with your battery, but we’ll need to have you do some troubleshooting before we can verify that it needs replacing. How does this sound to you?
    sounds good
    One moment while I tic the boxes of the things you’ve already done please
    ok
    Do you show any appellations in your App store that needs updating?
    no
    Do you lock your iPhone when not in use to shut the screen off?
    yes
    How bright have you set your display?
    it's on automatic
    Do you use Wifi mostly?
    at home and at work yes, so it's on wifi most of time
    Do you have a lot of applications pushing notifications to you?
    no, the phone doesn't have a lot of apps, especially after I restored it
    Understood
    Do you use your phone for emails?
    yes
    On your phone, would you go to Settings > Mail, contacts, Calendars > Fetch New Data for e please?
    yes
    it's set to push
    but I don't use the mail app from Apple
    I use the Gmail application
    Ah… Ok
    So there’s no email used there.
    Back up to the Settings page please?
    ok
    Go to General > Background App Refresh now
    yes, I disabled most of the apps her
    I just have the Gmail app and the Google Maps
    as these are the ones I use most
    LOL… You are the perfect user!
    What about Location Services?
    it;s on, but again, just for google maps
    Ok
    and the find my phone service
    Exactly
    Let’s go back into General then Usage please?
    Sorry, Nevermind, I can view that from your diagnostics...
    ok
    Do you use Instagram?
    yes
    That’s caused some memory issues of late...
    Your battery is starting to show wear though
    I didn't have any issues before updating to iOS7
    the battery was working perfectly fine
    never have any shutdown
    Your battery is also 2 years old
    One of the updates addressed battery issues and since you’ve restored your iPhone, it appears that it is on its way out.
    the battery was 2 years old last month as well, when I had iOS6 and was working fine
    I have done all updateds
    I certainly apologize about the inconvenience this issue is causing.
    But since you’re using your phone correctly, your restore hasn’t had any affect, this is the only conclusion I can reach
    so, what's the solution?
    can I come back to iOS6?
    I’m afraid there’s no way to go back to iOS 6
    so, I can't come back to the OS my phone was working properly, and I have to stick with a OS where my phones shutdown in the middle of the day with half battery full
    Again, it isn’t the fault of the operating system software.
    so, can you explain me why not?
    if with iOS6 the battery didn't have a problem
    and suddenly, when I update, I have an issue?
    You have restored your phone and set up as new. If that fixed the battery life, then it was a software issue. If not, it was a hardware issues
    look, if I come back to iOS6, the batttery issue is gone
    so, it's a software issue
    One moment while I get a senior advisor for you please?
    ok
    There’s just a few minutes wait time.
    no problem
    Just checking back… Our chat volume has gone up since Phone Support closed. This isn’t a normal wait but I’m still waiting with you.
    that's fine
    Still waiting with you
    ok
    Luccas, your problem requires extra knowledge and skill so I've got Calvin, one of my senior advisors taking over from here to make sure your problem gets the attention it deserves if that's okay with you. It was my pleasure to assist you today and I will leave you in Calvin's capable hands.
    Thanks Janan
    Hi Calvin
    You’re welcome… One moment and I’ll transfer you
    You are now being connected to another Advisor. Please standby.
    Thanks for contacting iOS. My name is Calvin. Please give me a moment to look over your information.
    Now Chatting with Calvin
    ok
    Hello Luccas, I see that your device is shutting down when the battery gets to about 40%, is that correct?
    correct
    I am really sorry to hear that, I can see that being frustrating.
    it shows that image saying to plug in the charges as the battery is dead
    I looked over the diagnostic it shows pass but its in yellow.
    yes, especially if you consider that was working just fine one month ago before I updated to iOS7
    I understand, it may cause people to think its the software but really what happens is during a restore or update sometimes it just brings the existing issues to the surface.
    As even though your battery pass, its in yellow signifying its ready to failed but it appears its already failing.
    Normal battery passes, its in green.
    Since you have already restored it as new. That pretty isolated the issue.
    sorry, I still don't get it. In one version of the software, my battery lasted the whole day without any issues. Now, after updating, the battery shutsdown at 40%. That's software issue for me. And, more important, if I wait about 10 to 15 min and try to turn on the phone. It's back again, and last until is about 30%, than, the same issue occurs.
    If iOS6 was able to handle the battery just fine. I would like to be able to install it again
    I understand you do have some concerns regarding iOS 7 and would like to revert back to your previous software. In order to avoid compromising your device in anyway the software is only designed to move forward. Downgrading the iOS is a feature that Apple cannot assist with as well as recommend since it can negatively affect your device.
    However, we are always open to suggestions from our customers. Using this website (apple.com/feedback) would be the best option for submitting your concerns directly to Apple. We love to hear from our customers and future updates may even include specific features suggested to us by our customers.
    Now keep in mind we have hundreds of millions of iOS device out there and most of them are running iOS 7 and running it fine.
    In my case, upgrade the software affected negatively my device.
    and a quick search on google shows that a lot of people have similar issues as me
    Ok, we're running in circles here
    You can do a search for iPhone anything and you will bring up a lot.
    I though you would come and offer a solution
    but you're just appologizing
    not the kind of support I would expect from a premium product
    The solution would be an out of warranty paid service.
    not sure if would pay the premium next time
    I don't see this as a solution. Because was an upgrade of software that made my phone stop working properly
    I am sorry, I would have to respectfully disagree. I do agree that you notice the issue after the update. However does not mean that the update cause the issue.
    So, explain me why in iOS6 it did happen?
    I am sorry but there is just too many possibilities out there and I would just be speculating.
    ok, so, at the same time that doesn't mean that the upgrade it's the cause, it could possibly mean that it's the cause, do you agree?
    So explain to me why hundred of millions of units are running it fine?
    I can't say about the hundred million of units
    and that's not an issue that I care about
    If even a fraction of the people had this call. I would not be talking to you as there would be huge backup of customers waiting.
    what I care about is that the phone I paid 800 swiss francs is not working after a software update
    I have a problem, and I'm contacting the customer service, so I care about being taking seriously and looking at the issue in my device
    telling me that hundred of millions of devices works, and mine doesn't, that's not helpful
    Ok, let me have you call phone support in you’re region. So that they can open up a engineering ticket and get you a response directly from engineering.
    United Kingdom
    (44) 0844 209 0611***
    so, now you're saying that the last hour of my time has been useless because it's not you that can solve my problem?
    and worse, you're making my self calling someone else and loosing even more time?
    What I am saying is you are not accepting my solution and you believe you are correct.
    So lets go with your direction to get you an answer directly from engineering.
    no, you're asking me to pay for a new battery
    That is my solution.
    and you're expeculating that's the solution
    you're not sure about that
    You disagree so lets go get you an answer from higher up, do you not like that solution?
    Lets agree to disagree and find you the answer you want.
    Period.
    ok, but I don't want to loose more of my time to call someone. And pay for the call
    Debating this with me is not going to get us anyhwere.
    I can setup a call back for you if you like.
    you have access to the customer service system and could open a ticket
    What number is best to reach you at?
    +44 07445376676
    just for my information
    what they will look at?
    anything they will do differently?
    Call is schedule for 8:00-8:15 AM.
    tomorrow?
    Saturday.
    Greenwich time.
    ok, again, can you tell me what they will look at? anything they can see that you couldn't?
    Thank you for your time.
    Your chat session has ended. Thanks for using Apple's chat support

    Sounds like you have a battry issue but don't want to believe it.
    If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
    BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
    Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
    Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call?  You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
    Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
    <Edited By Host>

  • Iphone 4s - fully working after ios7 update, but since ios7.0.2 update wifi is locked out. Tried all of apples recommendations and still no joy. Is there anyway around it?

    Iphone was working great, even after ios 7 update. However, since ios 7.0.2, the wifi has greyed out and wont work. I have done all the apple recommendations and even reset phone with apple tech help, but still no joy - is apple going to do another update to fix this problem???

    Sounds like you have a battry issue but don't want to believe it.
    If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
    BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
    Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
    Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call?  You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
    Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
    <Edited By Host>

  • Iphone 4s getting overheated after ios7 update

    iphone 4s is getting overheated and battery is discharging rapidly afet ios7 update. What to do? Even took the phone to service centre but that didn't help as they reinstalled the OS. What shall i do?

    I have the same problem with my iPhone 4. It is about 3 months old and the wear/damage that I can assume is bein done is going to....fry it, I would say render it useless but iOS 7 has done that already. I did not agree to download this new iOS Apple made the discion for me to install it "OTA" which they said was the problem and I should restore to factory default without backup, clean install. I did and it changed nothing. Running absolute barebones, no apps, no music, and every feature that is possible to disable, disabled. The 3G data randomly and often just stops working and I have to hard restart. When it is working it is worthless anyway, staring at the screen 10 minutes to load apple.com in safari. I have been an exclusive iPhone user for years and never thought I would say this but I will never buy another iPhone after this. I'm completely shocked. Steve Jobs must be turning over in his grave. I used to be so impressed with Apples attention to customer satisfaction. It's a shame shareholders aren't more concerned about their profit margins a few years from now.

  • Video lags like crazy when mirroring Macbook Pro to Apple TV

    So, the Apple TV is wireless, and youtube works fine, as long as i use it within the Apple Tv. However, when I mirror my Macbook Pro to the Apple TV, and play a youtube video or any other video on my computer, it lags; it lags a LOT!!!
    How do I fix this?
    I've heard about configuring the internet speeds from 5ghz to 2.4ghz. Will this work? and if so, HOW to I configure these settings on my Macbook or Apple TV?
    Please help! I got the Apple TV because we got rid of Foxtel, and I've got some movies on my hard drive, and TV shows, and I'd like to watch them, but the lag makes the movies and tv shows unwatchable!!
    Please help!
    Thanks in advance

    Switching between 2.4 & 5 GHz may bring mixed blessings. 5 GHz will likely avoid most interference but being a higher frequency is more easily blocked by walls and other objects 2.4 GHz is able to pass straight through. It therefore depends on your location which frequency would be best for you.
    Switching would be carried out in your router settings (assuming it supports both frequencies).
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • Photoshop lagging like crazy?

    Okay, so I recently bought Adobe Photoshop CS6 Student/Teacher Edition and installed on both a laptop and desktop. On the laptop it works perfectly, but on the desktop, it's lagging horribly. I have changed the drawing mode to basic, closed out other programs, changed the performance settings (and discovered I can use more memory on the desktop than on the laptop, so why is it so slow?), uninstalled/reinstalled Photoshop, and reformatted the computer. I am using an NVIDIA GeForce 9100 graphics card, which I updated, but PS is still lagging. Also, I did not have this issue with Paint Tool SAI, Paint, Autodesk Sketchbook Express, Adobe Photoshop Elements, or even the trial version of PS. (We did buy a new monitor with a larger screen since I last used the CS6 trial.) Is there any way to fix this issue? I love the new monitor but I hate being unable to draw with it.

    Yeah, but then why wouldn't  Photoshop Elements 9 and all the other software slow down? Sometimes CS6 stops lagging for a few minutes but then it always goes back to lagging. Also, on the laptop, I get an error saying the graphics processor won't work (or something like that - I can't remember what exactly.) Even though all the other drawing programs work fine, sometimes Netflix slows down. We tried updating the video processor and reformatting the computer again. I haven't had a chance to try Photoshop, but Netflix is still slow and I think Photoshop may start lagging again.

  • White bar across iPhone 4 locked out after iOS7 update...Help

    I did the iOS7 udpate this morning and now I have a white bar across my iPhone 4 screen and locked out.   I am only able to answer incoming calls at this point.  I tried restoring from backup but it needs me to turn off the locate phone option from the phone - can't because I'm locked out by white bar. The off button on the top of the phone hasn't worked for nearly a year to try to reset it that way.  Any other ideas out there?

    Hi there Dust2005in,
    You may find the troubleshooting steps in the article below helpful.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    -Griff W. 

  • Hotspot on Iphone does not work after ios7

    Can someone please help me?
    Ever since I have installed IOS7 on my iphone 4 the hotspot will not work either on my ipad or PC
    Used to work absolutely fine before ios7 on both devices.

    Does it switch on when you tap the switch in Settings>Personal Hotspot? If so, does the "discoverable" message appear below the switch when it's on?

  • Iphone blinking like crazy!!

    has anyone had their phone just start to blink on and off like it's going crazy? Mine did this while I was listening to a voicemail for. It only lasted for about 10 seconds then stopped.

    You can try to reset your iPod touch. Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears, but TBH if this doesn't cure it, then you should be looking at a return under warranty for repair / replacement.

  • Leopard video lagging like crazy

    So after installing Leopard on my upgraded G4 Cube (1.5GHz, 1.5GB RAM), I'm noticing insane video lag.  Nothing moves smoothly; Dock icons jump around.  I suspect that I need a newer video card that the factory-installed one.  I'm mainly just posting to make sure that's the culprit; I want to make sure before dropping 50 dollars on one.  So, is it the most likely culprit?

    Yes, the OEM Rage 128 Pro is a mangy, lazy dog, totally incapable of dealing with Leopards graphics requirements.
    You need a graphics card that supports OpenGL 2.0 (2.0 is best, OpenGL 1.5 at a minimum) and also supports Core Image.
    http://www.cubeowner.com/forums/index.php?s=daedcc2fe8d71e9ad698af434292705f&sho wforum=44
    The easiest to get into the Cube is a flashed Geforce 6200.
    More of a challenge, but the fastest card a 2x AGP machine can use, is a Radeon 9800 Pro.
    http://www.cubeowner.com/forums//index.php?showtopic=7081

  • My iPhone is acting crazy after dropping it (iphone log included)

    HI smart ones.  My daughter dropped her iPhone and now its wonky.
    Here is the log from the iPhone configuration untility.  Any ideas....
    ==== iPhone attached at 5/27/2012 12:08:07 PM ====
    May 27 11:41:43 unknown ptpd[120] <Notice>: PTP interface has been activated at high speed.
    May 27 11:41:49 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
    May 27 11:41:49 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
    May 27 11:41:49 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000040 DCTL=00000000 DSTS=00396800
    May 27 11:41:49 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
    May 27 11:41:49 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
    May 27 11:41:49 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ  DEPDMA
    May 27 11:41:49 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419a6004
    May 27 11:41:49 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c5000
    May 27 11:41:49 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 53e1d00c
    May 27 11:41:49 unknown kernel[0] <Debug>: EP83 004e8040 00000080 00000000 4f739e11
    May 27 11:41:49 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41fa2150
    May 27 11:41:49 unknown kernel[0] <Debug>: EP02 000a8200 00000000 00380ff4 49a3c00c
    May 27 11:41:49 unknown kernel[0] <Debug>: EP04 80098200 00000000 02008000 42019000
    May 27 11:41:54 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
    May 27 11:41:54 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
    May 27 11:41:54 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000040 DCTL=00000000 DSTS=0015c900
    May 27 11:41:54 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
    May 27 11:41:54 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
    May 27 11:41:54 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ  DEPDMA
    May 27 11:41:54 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419a6004
    May 27 11:41:54 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c5000
    May 27 11:41:54 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 53e1d00c
    May 27 11:41:54 unknown kernel[0] <Debug>: EP83 004e8040 00000080 00000000 4f739e11
    May 27 11:41:54 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41fa2150
    May 27 11:41:54 unknown kernel[0] <Debug>: EP02 000a8200 00000000 00380ff4 49a3c00c
    May 27 11:41:54 unknown kernel[0] <Debug>: EP04 80098200 00000000 02008000 42019000
    May 27 11:41:57 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x23e560 [0x3fbbd650]>{type = mutable dict, count = 3,
    entries =>
    2 : <CFString 0x23e510 [0x3fbbd650]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x23e540 [0x3fbbd650]>{contents = "012536000904986"}
    4 : <CFString 0x23e610 [0x3fbbd650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x3fbb19d0 [0x3fbbd650]>{contents = ""}
    11 : <CFString 0x23e640 [0x3fbbd650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x23e540 [0x3fbbd650]>{contents = "012536000904986"}
    May 27 11:41:57 unknown lockdownd[26] <Notice>: 01737000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
    May 27 11:41:57 unknown lockdownd[26] <Notice>: 01737000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
    May 27 11:41:57 unknown mc_mobile_tunnel[129] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    May 27 11:41:57 unknown mc_mobile_tunnel[129] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    May 27 11:41:57 unknown mc_mobile_tunnel[130] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    May 27 11:41:57 unknown mc_mobile_tunnel[130] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    May 27 11:41:59 unknown mc_mobile_tunnel[132] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    May 27 11:41:59 unknown mc_mobile_tunnel[132] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    May 27 11:42:43 unknown SpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    May 27 11:42:43 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->255
    May 27 11:42:43 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
    May 27 11:42:43 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
    May 27 11:42:53 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
    May 27 11:43:19 unknown SpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    May 27 11:43:19 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
    May 27 11:43:19 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
    May 27 11:43:19 unknown SpringBoard[51] <Notice>: MultitouchHID: device bootloaded
    May 27 11:43:19 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->0
    May 27 11:43:20 unknown kernel[0] <Debug>: set_crc_notification_state 0
    May 27 11:43:27 unknown SpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    May 27 11:43:27 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->255
    May 27 11:43:27 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
    May 27 11:43:28 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
    May 27 11:43:38 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
    May 27 11:48:59 unknown timed[133] <Notice>: (Note ) CoreTime: Want active time in 39.49hrs. Need active time in 122.82hrs.
    May 27 11:49:09 unknown timed[133] <Notice>: (Note ) CoreTime: Setting system time to 05/27/2012 18:49:10 from NTP
    May 27 11:49:10 unknown timed[133] <Notice>: (Note ) CoreTime: Not setting time zone to America/Phoenix from Location
    May 27 11:52:49 unknownSpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    May 27 11:52:49 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
    May 27 11:52:49 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
    May 27 11:52:49 unknown SpringBoard[51] <Notice>: MultitouchHID: device bootloaded
    May 27 11:52:49 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->0
    May 27 11:52:50 unknown kernel[0] <Debug>: set_crc_notification_state 0
    May 27 11:52:57 unknown SpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    May 27 11:52:57 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->255
    May 27 11:52:57 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
    May 27 11:52:58 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
    May 27 11:53:01 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_on even though we are not in it, doing nothing
    May 27 11:53:01 unknown notification_proxy[125] <Error>: Could not receive size of message: 0 Invalid argument
    May 27 11:53:01 unknown notification_proxy[125] <Error>: Could not receive message
    May 27 11:53:01 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
    May 27 11:53:01 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBSuspend
    May 27 11:53:01 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBSuspend
    May 27 11:53:01 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
    May 27 11:53:01 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
    May 27 11:53:01 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    May 27 11:53:01 unknown kernel[0] <Debug>: virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService*, void*) - kMessageInterfaceWasDeActivated
    May 27 11:53:01 unknown kernel[0] <Debug>: AppleUSBDeviceMux::reportStats: USB mux statistics:
    May 27 11:53:01 unknown kernel[0] <Debug>: USB mux: 124 reads / 0 errors, 211 writes / 0 errors
    May 27 11:53:01 unknown kernel[0] <Debug>: USB mux: 0 short packets, 0 dups
    May 27 11:53:01 unknown SpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    May 27 11:53:01 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
    May 27 11:53:01 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_on even though we are not in it, doing nothing
    May 27 11:53:01 unknown ptpd[120] <Notice>: PTP interface has been deactivated.
    May 27 11:53:01 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
    May 27 11:53:01 unknown UserEventAgent[12] <Warning>: DEBUG: Changing powered state: 0
    May 27 11:53:01 unknown SpringBoard[51] <Notice>: MultitouchHID: device bootloaded
    May 27 11:53:01 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->0
    May 27 11:53:02 unknown kernel[0] <Debug>: set_crc_notification_state 0
    May 27 11:53:09 unknown SpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    May 27 11:53:09 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->255
    May 27 11:53:09 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
    May 27 11:53:10 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
    May 27 11:53:20 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
    May 27 11:53:24 unknown CommCenter[56] <Notice>: Telling CSI to go low power.
    May 27 11:53:25 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x18000, stateNum 0, dev 0xc09e9000 (this 1, provider 0)
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(14022)
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1173400, BSSID = 58:6d:8f:55:db:83, rssi = -44, rate = 54 (100%), channel = 10, encryption = 0xc, ap = 1, failures =   0, age = 220, ssid[ 6] = "Barton"
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0xc09e9000 (this 1, provider 0)
    May 27 11:53:24 unknown kernel[0] <Debug>: pmu wake events: rtc
    May 27 11:56:45 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8002, stateNum 1, dev 0xc09e9000 (this 1, provider 0)
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0xc09e9000 (this 1, provider 0)
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(4023)
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::powerOn()
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    May 27 11:56:45 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1173400, BSSID = 58:6d:8f:55:db:83, rssi = -43, rate = 54 (100%), channel = 10, encryption = 0xc, ap = 1, failures =   0, age = 221, ssid[ 6] = "Barton"
    May 27 11:56:45 unknown CommCenter[56] <Notice>: Telling CSI to exit low power.
    May 27 11:56:45 unknown CommCenter[56] <Error>: kDataAttachStatusNotification sent, wasAttached: 0 isAttached: 0
    May 27 11:56:46 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    May 27 11:56:46 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    May 27 11:56:46 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
    May 27 11:56:46 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
    May 27 11:56:46 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    May 27 11:56:46 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    May 27 11:56:46 unknown kernel[0] <Debug>: en0: BSSID changed to 58:6d:8f:55:db:83
    May 27 11:56:46 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    May 27 11:56:47 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1338145007, last update = 1338144802
    May 27 11:56:55 unknown CommCenter[56] <Notice>: Telling CSI to go low power.
    May 27 11:56:56 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x18000, stateNum 0, dev 0xc09e9000 (this 1, provider 0)
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(14022)
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1173400, BSSID = 58:6d:8f:55:db:83, rssi = -44, rate = 54 (100%), channel =10, encryption = 0xc, ap = 1, failures =   0, age = 10, ssid[ 6] = "Barton"
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0xc09e9000 (this 1, provider 0)
    May 27 11:56:55 unknown kernel[0] <Debug>: pmu wake events: usb
    May 27 12:05:03 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8002, stateNum 1, dev 0xc09e9000 (this 1, provider 0)
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0xc09e9000 (this 1, provider 0)
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(4023)
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::powerOn()
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1173400, BSSID = 58:6d:8f:55:db:83, rssi = -46, rate = 54 (100%), channel = 10, encryption = 0xc, ap = 1, failures =   0, age = 11, ssid[ 6] = "Barton"
    May 27 12:05:03 unknown CommCenter[56] <Notice>: Telling CSI to exit low power.
    May 27 12:05:03 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_on even though we are not in it, doing nothing
    May 27 12:05:03 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state unplugged_awake even though we are not in it, doing nothing
    May 27 12:05:03 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_on even though we are not in it, doing nothing
    May 27 12:05:03 unknown CommCenter[56] <Error>: kDataAttachStatusNotification sent, wasAttached: 0 isAttached: 0
    May 27 12:05:03 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
    May 27 12:05:03 unknown SpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    May 27 12:05:03 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
    May 27 12:05:03 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
    May 27 12:05:03 unknown UserEventAgent[12] <Warning>: DEBUG: Changing powered state: 1
    May 27 12:05:03 unknown SpringBoard[51] <Notice>: MultitouchHID: device bootloaded
    May 27 12:05:03 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->0
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    May 27 12:05:03 unknown kernel[0] <Debug>: en0: BSSID changed to 58:6d:8f:55:db:83
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
    May 27 12:05:03 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
    May 27 12:05:03 unknown kernel[0] <Debug>: launchd[137] Builtin profile: ptpd (sandbox)
    May 27 12:05:03 unknown kernel[0] <Debug>: set_crc_notification_state 0
    May 27 12:05:04 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x23e560 [0x3fbbd650]>{type = mutable dict, count = 3,
    entries =>
    2 : <CFString 0x23e510 [0x3fbbd650]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x23e540 [0x3fbbd650]>{contents = "012536000904986"}
    4 : <CFString 0x23e610 [0x3fbbd650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x3fbb19d0 [0x3fbbd650]>{contents = ""}
    11 : <CFString 0x23e640 [0x3fbbd650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x23e540 [0x3fbbd650]>{contents = "012536000904986"}
    May 27 12:05:04 unknown lockdownd[26] <Notice>: 00381000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
    May 27 12:05:04 unknown lockdownd[26] <Notice>: 00381000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
    May 27 12:05:04 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1338145504, last update = 1338145012
    May 27 12:05:04 unknown mc_mobile_tunnel[145] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    May 27 12:05:04 unknown mc_mobile_tunnel[145] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    May 27 12:05:04 unknown mc_mobile_tunnel[146] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    May 27 12:05:04 unknown mc_mobile_tunnel[146] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    May 27 12:05:04 unknown lockdownd[26] <Notice>: 00381000 set_response_error: handle_start_session SessionActive
    May 27 12:05:04 unknown ptpd[137] <Notice>: PTP interface has been activated at high speed.
    May 27 12:05:09 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
    May 27 12:05:09 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
    May 27 12:05:09 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000040 DCTL=00000000 DSTS=003aa400
    May 27 12:05:09 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
    May 27 12:05:09 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
    May 27 12:05:09 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ  DEPDMA
    May 27 12:05:09 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419a6004
    May 27 12:05:09 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c5000
    May 27 12:05:09 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 5492a00c
    May 27 12:05:09 unknown kernel[0] <Debug>: EP83 004e8040 00000080 00000000 4f739f91
    May 27 12:05:09 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41fa2098
    May 27 12:05:09 unknown kernel[0] <Debug>: EP02 000a8200 00000000 00380ff4 5206c00c
    May 27 12:05:09 unknown kernel[0] <Debug>: EP04 80098200 00000000 02008000 42021000
    May 27 12:05:11 unknown SpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    May 27 12:05:11 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->255
    May 27 12:05:11 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
    May 27 12:05:11 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
    May 27 12:05:14 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
    May 27 12:05:15 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
    May 27 12:05:15 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000040 DCTL=00000000 DSTS=00170900
    May 27 12:05:15 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
    May 27 12:05:15 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
    May 27 12:05:15 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ  DEPDMA
    May 27 12:05:15 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419a6004
    May 27 12:05:15 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c5000
    May 27 12:05:15 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 5492a00c
    May 27 12:05:15 unknown kernel[0] <Debug>: EP83 004e8040 00000080 00000000 4f739f91
    May 27 12:05:15 unknown kernel[0] <Debug>: EP85 00c88200 00002010 20000000 41fa20b8
    May 27 12:05:15 unknown kernel[0] <Debug>: EP02 000a8200 00000000 00380ff4 5206c00c
    May 27 12:05:15 unknown kernel[0] <Debug>: EP04 80098200 00000000 02008000 42021000
    May 27 12:05:22 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
    May 27 12:07:02 unknown mc_mobile_tunnel[150] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    May 27 12:07:02 unknown mc_mobile_tunnel[150] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    May 27 12:07:49 unknown SpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    May 27 12:07:50 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
    May 27 12:07:50 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
    May 27 12:07:50 unknown kernel[0] <Debug>: set_crc_notification_state 0
    May 27 12:07:50 unknown SpringBoard[51] <Notice>: MultitouchHID: device bootloaded
    May 27 12:07:50 unknown SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->0
    May 27 12:07:56 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
    May 27 12:07:56 unknown notification_proxy[141] <Error>: Could not receive size of message: 0 Invalid argument
    May 27 12:07:56 unknown notification_proxy[141] <Error>: Could not receive message
    May 27 12:07:57 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
    May 27 12:07:57 unknown UserEventAgent[12] <Warning>: DEBUG: Changing powered state: 0
    May 27 12:07:57 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBSuspend
    May 27 12:07:57 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
    May 27 12:07:57 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
    May 27 12:07:57 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    May 27 12:07:57 unknown kernel[0] <Debug>: virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService*, void*) - kMessageInterfaceWasDeActivated
    May 27 12:07:57 unknown kernel[0] <Debug>: AppleUSBDeviceMux::reportStats: USB mux statistics:
    May 27 12:07:57 unknown kernel[0] <Debug>: USB mux: 121 reads / 0 errors, 196 writes / 0 errors
    May 27 12:07:57 unknown kernel[0] <Debug>: USB mux: 0 short packets, 0 dups
    May 27 12:07:57 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
    May 27 12:07:57 unknown ptpd[137] <Notice>: PTP interface has been deactivated.
    May 27 12:08:04 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
    May 27 12:08:04 unknownaggregated[50] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
    May 27 12:08:04 unknown aggregated[50] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
    May 27 12:08:04 unknown UserEventAgent[12] <Warning>: DEBUG: Changing powered state: 1
    May 27 12:08:05 unknown ptpd[137] <Notice>: PTP interface has been activated at high speed.
    May 27 12:08:05 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
    May 27 12:08:05 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
    May 27 12:08:05 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
    May 27 12:08:05 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
    May 27 12:08:05 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x23e560 [0x3fbbd650]>{type = mutable dict, count = 3,
    entries =>
    2 : <CFString 0x23e510 [0x3fbbd650]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x23e540 [0x3fbbd650]>{contents = "012536000904986"}
    4 : <CFString 0x23e610 [0x3fbbd650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x3fbb19d0 [0x3fbbd650]>{contents = ""}
    11 : <CFString 0x23e640 [0x3fbbd650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x23e540 [0x3fbbd650]>{contents = "012536000904986"}
    May 27 12:08:05 unknown lockdownd[26] <Notice>: 00381000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
    May 27 12:08:05 unknown lockdownd[26] <Notice>: 00381000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
    May 27 12:08:06 unknown mc_mobile_tunnel[158] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    May 27 12:08:06 unknown mc_mobile_tunnel[159] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    May 27 12:08:06 unknown mc_mobile_tunnel[158] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    May 27 12:08:06 unknown mc_mobile_tunnel[159] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    May 27 12:08:06 unknown lockdownd[26] <Notice>: 00381000 set_response_error: handle_start_session SessionActive
    May 27 12:08:06 unknown lockdownd[26] <Notice>: 00381000 set_response_error: handle_start_session SessionActive
    May 27 12:08:12 iPhone kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
    May 27 12:08:12 iPhone kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
    May 27 12:08:12 iPhone kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000040 DCTL=00000000 DSTS=001b3100
    May 27 12:08:12 iPhone kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
    May 27 12:08:12 iPhone kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
    May 27 12:08:12 iPhone kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ  DEPDMA
    May 27 12:08:12 iPhone kernel[0] <Debug>: EP80 00008000 00000080 00000000 419a6004
    May 27 12:08:12 iPhone kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c5000
    May 27 12:08:12 iPhone kernel[0] <Debug>: EP81 80888200 00000000 20080000 54e9700c
    May 27 12:08:12 iPhone kernel[0] <Debug>: EP83 004e8040 00000080 00000000 4f739f91
    May 27 12:08:12 iPhone kernel[0] <Debug>: EP85 00c88200 00002010 20000000 41fa3408
    May 27 12:08:12 iPhone kernel[0] <Debug>: EP02 000a8200 00000000 00380ff4 4433000c
    May 27 12:08:12 iPhone kernel[0] <Debug>: EP04 80098200 00000000 02008000 42001000
    May 27 12:08:12 iPhone SpringBoard[51] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    May 27 12:08:12 iPhone SpringBoard[51] <Notice>: MultitouchHID: detection mode: 0->255
    May 27 12:08:12 iPhone UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
    May 27 12:08:13 iPhone kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
    May 27 12:08:17 iPhone kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
    May 27 12:08:17 iPhone kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
    May 27 12:08:17 iPhone kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000040 DCTL=00000000 DSTS=00378f00
    May 27 12:08:17 iPhone kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
    May 27 12:08:17 iPhone kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
    May 27 12:08:17 iPhone kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ  DEPDMA
    May 27 12:08:17 iPhone kernel[0] <Debug>: EP80 00008000 00000080 00000000 419a6004
    May 27 12:08:17 iPhone kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c5000
    May 27 12:08:17 iPhone kernel[0] <Debug>: EP81 80888200 00000000 20080000 54e9700c
    May 27 12:08:17 iPhone kernel[0] <Debug>: EP83 004e8040 00000080 00000000 4f739f91
    May 27 12:08:17 iPhone kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41fa20b8
    May 27 12:08:17 iPhone kernel[0] <Debug>: EP02 000a8200 00000000 00380ff4 4433000c
    May 27 12:08:17 iPhone kernel[0] <Debug>: EP04 80098200 00000000 02008000 42001000
    May 27 12:08:23 iPhone kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
    May 27 12:08:33 iPhone mc_mobile_tunnel[162] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    May 27 12:08:33 iPhone mc_mobile_tunnel[162] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.

    Thanks Peter.  Understood.  But sometimes the chat thread is picked up by google and thus, smart programmers.  I was hoping with such luck someone could look at the utility log and give me a quick understanding if its worth my time scheduling a Genius session (I have changed the case to a pink case and I dont want the hassle if they are going to just kick my frummpy butt out of the store due to a case change).  Anyway, I will look into your suggestion.  Thanks for the note.  All my best!

  • Firefox downloads like crazy after startup (hundreds of megs)

    After starting up firefox it often immediately starts to download hundreds of megs at max speed for no apparent reason, clogging my network.
    I've got a lot of tabs open, some youtube too, but after startup those aren't loaded yet, they only load after being clicked on, so they can't be the culprit.
    I'm using ff 22.0 on linux. My addons:
    adblock plus
    download helper
    downthemall
    firegestures
    flashblock
    flashgot
    noscript
    reloadevery
    tab auto reload
    tabgroups manager

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • WRT54G v8 -- Lagging like crazy...

    Well I have my PC wirelessly connected with the Linksys wireless adapter, and my laptop is also connected wirelessly with a Broadcom adapter. But my PC hits 2sec lag spikes every so often whereas the laptop at the same time doesnt have any problems.
    What the hell?
    The lag spikes are while both PC's are playing World of Warcraft.

    I had the same problem and I also play WoW.
    My laptop (has built-in wireless adapter) works fine, no lag, nothing.
    My desktop was hard-wired.  Then I bought a Linksys wireless PCI card.  At first I had problems with the driver being recognized correctly (stating it was a Broadcom instead of Linksys).  Even though it worked, I was getting sloooow speeds.
    I finally got the correct driver from the CD to work and it worked fine, but then I started getting lag spikes.  I had to get the latest driver from the Linksys website and reset the router.  It's finally working correctly (for now), but I think it's also because of Vista.  I've never had this problem while running XP Pro.  But now that both are running Vista, I've had nothing but problems.

Maybe you are looking for

  • One edge animate oam file with sound no work in muse, I need urgent help please

    (I speak spanish and I translate this with google translate, sorry.  Try to understand)(I can read english) A sound file oam place it in adobe muse does not work, how can I do. In works right edge Animate and when I preview in the browser looks perfe

  • File download works in Firefox but not IE

    Hi All, I have the code below, fds = new FileDataSource(fileName); response.setContentType("text/html;charset=UNICODE"); response.setHeader("Cache-Control","public"); response.setHeader("Content-Disposition", "attachment; filename=\"" + fds.getName()

  • SQL Statement error - ORA-00903: invalid table name

    Hi I have written a sql script that gets executed from a form within e-business suite. Unfortunately, the script is falling over with an error: unknown command beginning "MERGE INTO..." - rest of line ignored. unknown command beginning "USING edop...

  • "cannot check for purchased music"

    unknown error 11502. That's what it's telling me. what does it mean? how to I buy music?

  • Oracle8i Login Error

    I am having problems to log into SQL and Enterprise Manager from the client machine. (no problems from the server) The errors encountered are: Error:ORA-12560:TNS:Protocol Adaptor error Error:ORA-12514:Message 12514 not found; product=RDBMS80; facili