IPhone 4 loss of sounds since os up date

I have recently up dated my iPhone 4 32gb as instructed to by my phone for the latest software. 
Since then I have lost all sound from it.  Only the alarm and loud speaker works.
I have tried:
Turning it off and on again
Holding the on off &home button to reboot
Plugging it in to my mac to see if this cures it
So far no joy.
Any help much appreciated
Many thanks Andy

From this support document http://support.apple.com/kb/TS3694 see this:
Unknown Error containing "0xE" when restoring
To resolve this issue, follow these steps. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. Learn about issues syncing iOS devices with P55 and related Intel Chipsets.

Similar Messages

  • IPhone 4S loss of sound through speakers

    Here's an oldie with a twist! My iPhone 4S has lost sound through the speakers. Strangely 90% of the time keyboard clicks work when entering the pass key but nothing after that. I have 'restored' it, cleaned every orifice and 'upgraded' to IOS7. Has anyone got the same problem but more importantly an answer.
    Thanks

    Thank you. Trouble is, you clearly live in Apple Land! Across the Pond it's not quite so easy!
    I'll make enquiries as to wether we have such Bars.
    Thanks again

  • IPhone 5 loss of sound

    My iPhone has lost sound.  Turning the phone off and then back on has not helped.  Any suggestions?
    Thanks

    Hi Mary,
    The troubleshooting steps in this article may help you with this:
    iPhone: Can't hear through the receiver or speakers
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Hope this helps!
    - Judy

  • Loss of sound during calls following updating iphone 4 with IOS5

    I've recently updated my Iphone 4 with the IOS5 update.  Since then I've had terrible problems with loss of sound on phonecalls.  I can hear others but they cant hear me  - loss of sound is patchy during a call.  I've cleaned mic with a soft brush and rebooted but problem still exists.  Any ideas before I restore factory settings/ and or take back to the shop?

    I have a Iphone 4 and when i try to make calls, i cannot hear anything unless i put it on speaker, and sometimes if i try to turn the call volume up during a call without the speaker it almost sounds like the speaker is blown out. I just bought this phone online 2 days ago so i don't understand how that could happen.
    Is anyone having this problem? I'm am totally lost with what to do other than return the phone in and see if i can get another one?
    Please help!!!!!

  • Why is my iPhone 4gs dropping sound since 7.1 update?

    Why is my iPhone 4gs dropping sound since 7.1 update?

    Klbnrdb wrote:
    Why is my iPhone 4gs
    No such model exists, therefore there is no problem.
    Seriously though, clean the dock connector and headphone jack.  Lint/debris in either can cause problems.

  • Help please, i lost my iphone 4s sound since i update to ios 7.0.6

    Help please, i lost my iphone 4s sound since i update to ios 7.0.6,
    Calls voice is okay but all other music, videos, apps all soundless

    Have you tried reseting your device by holding home+power button until the apple logo appears? If this doesnt hel ,please back up your device and do a fresh restore with itunes. To do a restore, follow these steps:
    http://support.apple.com/kb/ht1414
    Hope I helped

  • Intermittant loss of sound

    since i updated the software on my iphone 4 i have intermittant loss of sound i have researched and this is a common problem trouble is no one has an easy fix answer the best suggestion is to revert the phone back to the old software but i have no idea how to do this and apple dont seem to be acknowleging that they messed up with the update so if anyone can help i would be very gratefull
    many thanks

    I have been there and done that.....makes no difference. Why do you think that the all of a sudden it would change the output in the first place? Things don't change by themselves for no apparent reason. It was still on the bose speakers when I went into sys pref. Amazing that you think that it would change itself everyday....did you really read my post or were you distracted?

  • I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have had this same problem for weeks now with my 4S.  I just got a new 5S after being extremely frustrated and the same thing - no sounds.  After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?"  I didn't even know such a function existed.  Upon looking that was exactly the issue.
    To resolve, go to Settings> Do Not Disturb> Manual.  If it is green, turn it off.  You will now get phone calls and text alerts.
    This functionality is also on your quick access utility menu (slide up menu).  I assume this is how it was enabled on my phone.
    I will post on other sites since I searched for weeks for this solution and didn't see it anywhere.  Good luck!

  • Loss of sound (Hard-reset and restore does not work)

    Hi,
    I loss all sounds on my iPad 2 (currently on iOS 7.04). This is the 2nd time I have had this issue (had it with an earlier iPad) and had to replace the previous one (out of warranty period).  Very frustrating as it is about the same time period after purchase.  Last time, it seemed like a repeated fault with the iPad and I cannot believe I have the same issue again on a different product.  It is an expensive way of having to re-buy every couple of years for no other reason.
    It did not happen immediately after an update i.e. it does not appear to be "update" or iOS version-related. 
    Anyone got any advice please?  The facts are as follows (and what I have tried).
    When it happened?
    I was in iMovie editing a movie when all sound went from the speaker.  It continued to work with earphones plugged in, but this is now intermittent.  I have no sound on the speaker at all except for when I click sounds on the menu and change the level of ringer alert (which works on the speakers).  This seems to tell me that it is a software problem.  I have no sound on any applications or internet video or music from iTunes.  I cannot survive on the earphones as they only work for a period of time and then they fail (until I take the jack out again when it works again for a period of time before the headphones fail again).
    What have I tried?
    a) Numerous hard resets
    b) changing the side switch's position
    c) changing in general settings the side switch settings from lock rotation to mute and back again (repeatedly and in reverse to see if it makes any difference)
    d) resetting all settings - this made no difference
    e) erase all content and settings - interestingly at the stage when it asked me if I wanted to restore from an iCloud account, it was making sounds (the keyboard clicks - which don't make a sound irrespective of the click setting currently) i.e. appeared to have resolved the issue and as soon as I restored my iCloud back-up, the sound went again.
    I would be grateful for any suggestions.  This post also includes a recommendation to Apple on improving its product (relating to iCloud backups) as the ultimate solution should not be paying for a replacement for a software issue (to avoid losing all my data permanently).
    My musings are that:
    a) it is definitively a software issue (on account that the speakers work in certain situations only)
    b) it appears to be that the software is corrupted in my iCloud back up
    c) it is an issue that happens regularly and is an avoidable issue/cost to Apple's customers that needs to receive higher priority in being addressed as it is built in redundancy for a significant proportion of customers.  At the very least, iCloud backups should be capable of being restored in part - is there any way this could be done so we don't lose all of our notes, media etc if the final advice is to "start again".  How can it be right to lose all content because of an Apple system software issue?  I am pre-guessing this will be the final advice (if I don't want to pay for a replacement iPad)?
    Please help me and all those others with the same avoidable software problem.
    Thank you,
    Peter

    This is an iPad user to user forum, so you are not addressing Apple.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • After upgrade my iphone 4 to IOS6, sound doesn't work correctly

    After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
    During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • Vist Basic & XFI, random loss of sound and World of Warcraft Hardware enabling iss

    Hello.. First off want to say that prior to reinstalling Vista last week, I had no had any issues with my XFI and Vista.. Since the re-install, while running World of Warcraft and Ventrillo, I get random loss of sound. And by that, specifically I mean, the sound shuts off, and I get a constant loud hiss noise that does not stop until a reboot is performed. If I just run WoW and no Ventrillo, I dont get the random problem and the sound runs fine. It is however a highly annoying issue that requires too many reboots in evening. Getting to the point of just trying the onboard sound, which I'd certainly rather not do.
    Additionally there is an option in WoW that allows for Hardware enabling, which is supposed to improve performance. When I check this box and restart the game, the box is still not checked. Not sure if this is a CL problem, but something is wrong for sure! I'm using the latest drivers that are on creativelabs.com for my Vista 32 bit system. And again, didnt have these issues prior to the fresh re-install of Vista. Before that I had stepped up the drivers all the way from Vista. Thanks for any feedback on this.

    Not sure why your sound is cutting out... but as for WoW, it needs ALchemy installed to run with hardware audio enabled under Vista. I dont believe its in the list of titles included with ALchemy just yet, but adding it manually with the default options works just fine. Without doing this I believe the new sound core used in WoW will automatically detect that it cannot do hardware audio and simply uncheck the box whenever you try, where-as before it would work but still give you Software rendered sound (only instead of WoWs audio engine doing it, it was Vistas - not exactly an improvement). Incidentally, this not only improves performance but vastly improves the sound quality - especially when excessive numbers of sounds are being played. (eg Mass AoE effects on larger numbers of mobs, such as two Warlocks Hellfiring along with a Hurricane and Consecration while pulling the Ballroom - 9 mobs per group - near Moroes in Karazhan) Its possible doing this may also correct your cut-out issue, but its possible it wont. Ive been running WoW alongside Vent for months now under Vista w/ALchemy and an X-Fi and never had such a problem, but then I do also run Vent off the onboard audio so I can use a small earpiece and have voices clearly audible through game sound.

  • Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery.  But I got more time out of running with my iPhone. Does this sound normal? I thought I sh

    Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery.  But I got more time out of running with my iPhone. Does this sound normal? I thought I should get close to 30 hrs of just play time alone.
    ALso, my wife got me the Belkin armband to run with the nano but I sweat through the band resulting in the back of the iPod to get wet. Surely this is not good. Anyone have a recommendation for an armband that keeps moisture away from the pod?

    iPod Nano are small and they don't use Wi-Fi access so you get less power time on a Nano. As for iPhone, since you got apps, Wi-Fi + 3G access, and everything else, they give you more time so you can keep using. Nanos are ment to listen to music, listen to radio, view your photos, watch videos (without Wi-Fi) and since you got BlueTooth on the nano, it counts as wireless access so it drains your battery faster.

  • Dear , please help me to solve my problem in activating my iPhone Where I lost it since 3 months and when found it cannot activating my ID Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at

    Dear , please help me to solve my problem in activating my iPhone
    Where I lost it since 3 months and when found it cannot activating my ID
    Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
    And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
    My iPhone data
    Ime:  ****
    Model: A1332
    FCC  ID : BCG-E2380A
    IC: 579C-E2380A
    MY id at cloud   ****
    Password    ( ****)
    My country : Egypt
    MY EMAIL : ****
    Tell no: ****
    <Personal Information Edited By Host>

    The following may help:
    Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
    If you didn't receive your Apple ID verification or reset email - Apple Support

  • IPhone 6 battery life draining since 8.1 update

    Is anyone else having problems with their iPhone 6 battery life diminishing since the latest 8.1 update? I notice I'm getting much less usage time per hour. For example, before 8.1, it would take about 3 hours of usage time to get to 70%. Now it only takes 2 and it gets worse after that. Here is a screenshot I took of the battery usage before the 8.1 update:
    This is pretty normal usage timings for me (it was taken Monday, October 20th). Now, here is a screenshot from today, after starting out with 100% this morning:
    As you can see, it's quite a huge difference. The weird thing is that messaging seems to take up more battery life than it used to. Yes, I do text quite a bit during the day but the frequency of this has not changed between now and October 20th. It shouldn't be using THAT much battery life. I took it to the Genius Bar yesterday to ask them about this problem and the girl told me that she saw some crashing from the Messages app in Diagnostics Information and she felt that maybe since the update, there was something causing that app to use more battery. So she suggested erasing the phone and restoring from an iCloud backup. I did this yesterday when I got home but, as you can see, the problem is no better (though there are no more crashes listed in the diagnostics information).
    I have no idea what else I can do to fix this and I'm getting really tired of having to charge this twice a day now (I used to have to do this with my iPhone 5, as well). If anyone has had a similar problem, I would appreciate suggestions. And before you ask, I'm doing all of the normal battery saving tricks, like turning off background app refresh, not having it check for mail all the time (it's manual), brightness is down, I turn wifi off when not using it, I don't leave apps open, etc etc etc.
    Any help would be appreciated. Thanks in advance!!!
    Pooja

    I turn off background refresh, mail push/fetch, and I turn off wifi and bluetooth if I'm not using them. I also minimize which apps use location services. Even when doing all of that though, the battery life became terrible on 8.1. Since updating to 8.1.1 all issues seem to have been fixed so I'm very grateful for that. I recommend anyone on 8.1 who is having issues to upgrade to 8.1.1 immediately.

  • HT4946 i am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure

    I am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure that i

    You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours.  If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
    You can have as many AppleIDs as you want (or at least, as many as you have email addresses for).  You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
    You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

Maybe you are looking for

  • How can i get my contacts from textfree app if ipod wont turn on

    Can i get my contacts from textfree app on my pc if ipod wont turn on?

  • After 8.0.1 to 8.0.2 upgrade, iTunes no longer sees my iPhone..

    I'm at a loss. I've done everything listed on the generic help page... http://support.apple.com/kb/TS1363?viewlocale=en_US ...and I still can't get iTunes to see my iPhone. It worked fine yesterday, but after the iTunes update, I doesn't show up at a

  • I Can't Get Apple Hot News RSS Screen Saver!

    I can't get Apple RSS screen saver! All I can get is the Wikipedia Recent Changes one and I DON'T CARE ABOUT THAT!!!!! Please help me get the Apple screen saver back like I used to have.

  • Pjc and hindi not getting java class

    I am trying to implement a java class using hindi font .I have also configured formsweb.cfg file for jar file. I have placed the jar file under java directory in form60 on application server machine . below is produced the message on java console --

  • Cannot print from mobile device

    Hello, I just inherited an HP Photosmart D7360 printer. I bought an external bluetooth connection for this device, which is discoverable by my Mac. I am trying to print from my Iphone 5S, but it does not detect the printer at all. Please help. Thanks