Iphone 4 microphones don't work

I bought an iphone 4 yesterday(secondhand) but when I came home i realised the microphones don't work.
I've tried cleaning the holes, recovering the software, tried calling.
The headset does work, the mics don't work in any app. I've tried a lot of them.
Weirdly enough, when I call and i press numbers on the keypad, the other person hears the sound.
We don't have apple stores here, only normal phone stores. I really don't know what to do.
The person that i bought it from says it worked..

OK, let's try a reset.
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Similar Messages

Bluetooth Iphone 4 don't work with other device?

Bluetooth Iphone 4 don't work with other device?

Could be a problem with the contacts on your iPhone's connector. Try cleaning the contacts using compressed dry compressed air, blowing on the contacts using your mouth being carefully not to spit, or using a very soft dry brush.

TS2634 My iphone headphones with microphone don't work. Any suggestions?

My iphone headphones with microphone have stopped working, and they are under warranty. I am having difficulty getting an answer about what to do from Apple - just got off the phone with them, and they emailed me an article that was of no help at all. Any suggestions as to how I can resolve this issue would be greatly appreciated.

All, I have this same problem and has just solved it on my iPhone.
I read up on the problem at att.com/esupport and arrived at the link below:
https://www.att.com/esupport/article.jsp?sid=KB413495#fbid=ahhj00ALH45
"If your email address is linked to your AT&T Access ID, changing your AT&T Access ID password automatically changes your email password to the same password.
If you use your email address as your AT&T Access ID, changing your email password automatically changes your AT&T Access ID password to the same password."
I have a ATT Uverse (for my internet access) acct and could not log on so I requested for password reset. They sent me temp password and I had to change my password to my Uverse acct. I use my att.net email as the log on for my Uverse acct. Per att instructions above, my Uverse acct is linked to my att.net email, so now my att.net email pw has been changed to the pw for my Uverse acct.
Accordingly, go into your iPhone Settings, Mail, Contacts, Calendars, choose your Att.net mail acct and change your password. In my case I changed it to the new pw I had set up for my Uverse acct and it works.
Before doing this, I had also added new servers as shown below. The way I see it because your iPhone will try in succession to log on to each server from top to bottom of the list, it's best to add all the mail servers.
smtp.mail.yahoo.com
smtp.mail.att.net
outbound.att.net
Please note that I did not have to add "imap.mail.att.net" and my Att.net mail on my iPhone still works.
Hope this helps.

Iphone 5 don´t work stabil in the bluetooth word

I can sometimes, and sometimes not connect to me Ipad 2 and PC. turn of and on, sometime i works some times i don´t work. I am waiting and Waiting because it is sometimes slow to be connect, other times it connect immediately.
When I finally get a connection it works very fine.
I am very disappointed by having buying one of the perhaps the most expensive phone om market and then have this vere unstable connection.even to appels own product.
Other phones do not have these problems, They find an connect immediately equipment like PC, Ipad and Headset.
I can not use it in my proffessionel work life, I am very disappointed, and I am now forced to change to an other mobilphoned.

You need a 3rd party iPhone file browser such as TouchCopy. See: https://discussions.apple.com/docs/DOC-3141. This covers more than photos, but it should still be useful.
Note, however, that if the photos were taken with a higher resolution camera than the iPhones the images that you copy back to your computer will be lower quality than the originals, as images in the Photo app are optimized for the iPhone's screen.

IPhone speakers don't work when getting calls

i have a very specific speaker problem:
My speaker don't work but only when receiving or making calls. It does work in all other apps. It also works fine when making a call and using either headphones or when using the speakerphone.
Tried turning on and off. Tried reseting. Tried cleaning the headphone jack. Tried holding on the lower right side of the phone (people actually say it worked for them).

See Here...
TROUBLESHOOTING iPhone Hardware
http://support.apple.com/kb/TS2802
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or Authorized Apple Service Provider is the Next Step... Be sure to make an appointment first...

My microphone don`t work

Hi all, my micophone don`t work, BUT if i use the speaker it works well ?? I reboot the device and make a recovery.... nothing change , micro dead ???
Thank you for support
Regards from Germany Ralf

Bring your phone into Apple or an authorized service provider for evaluation.

My microphones don't work with my laptop

I've got a toshiba laptop running XP and my microphone and external microphone doesn't work. The other person can't hear me. I've tried all the different possible settings, but notice that the mute is checked whenever I check back to the settings.
Please help.
Thanks,
Brian

Then you need to contact the vendor or manufacturer to find out if its compatible with Lion.

External microphones don't work with audio input

Tell me its not true that an ordinary mic won't work with the audio input....I have 2 mics which I know to work mini jack [tried both stereo and mono] and zip! nothing....what is wrong with this equation
any ideas from the floor? [do I really have to go and buy another usb headset or an iMic to resolve this??
please tell me there's another option!
thanks
Tony

I have been unable to get the microphone input with a Viewsonic 22" monitor with webcam to work with either iChat or iVisit with my Mac Pro. There have been other reports on the web about newer versions of the OS 10 inactivating the audio input for several programs. Is this why the microphone does not work or is it true that the audio input does not act as one? If the audio input does not work with an external microphone, what is it for?

So, these functions in most iPhone 4S don't work?

I'm pretty sure that a lot of people are having the same issues as I am. And I'm thinking it's because of a bug or something in the current iOS.
I've just bought a Factory Unlocked iPhone 4S from the States about a week ago and brought it back with me to my home country, Thailand. Everything works fine, since I can use the phone to make calls and whatever not. However, these functions in my new iPhone failed to work...
1. I can RECEIVE MMS, but CANNOT send them. And
2. I can use FaceTime and iMessage through my Apple ID, but I CANNOT get a verification for them through my phone number. Which up to this point, I still don't have a clue nor the solution to solve the problem.
So, with that being stated, I've found a lot of people encountering the same issues/problems as I am and was wondering what I should do....
Thanks for the reading the post. And feel free to make any comments!

Restart your phone by holding the power and home button until the Apple logo appears. Be aware that some owners of iPhone 4 have had difficulty using WIFI after the upgrade.

[SOLVED] HP420 and Built-in microphone don't work.

I have a trouble with my on-board microphone in my laptop (hp-420), it was working some months ago (with previous kernel) and I didn't use it for a while, after several upgrades now I tired to use it and it doesn't work. Second microphone, a jack, doesn't work either, and it's arch related, because I did some tests in windows (have dual boot) and both the built-in and jack work fine. So far I have tried testing alsa configurations, played with preferences and some other things I have read over the internet and in arch forums, but no luck at all. I may think it's kernel related but I'm not sure as I'm not an expert. Also sound works fine, it's only the built in microphone the one I can not get to work. I whish someone could help me or guide me.
So all the info I could gather about my machine and the sound
!!Linux Distribution
Arch Linux
!!DMI Information
Manufacturer: Hewlett-Packard
Product Name: HP 420
Product Version: F.04
!!Kernel Information
Kernel release: 2.6.37-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz
SMP Enabled: Yes
!!ALSA Version
Driver version: 1.0.23
Library version: 1.0.24.1
Utilities version: 1.0.24.2
!!Loaded ALSA modules
snd_hda_intel
!!Sound Servers on this system
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xd8a00000 irq 47
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:1b.0 0403: 8086:293e (rev 03)
Subsystem: 103c:1526
!!Modprobe options (Sound related)
snd-hda-intel: model=hp
snd-hda-intel: model=hp
!!Loaded sound module options
!!Module: snd_hda_intel
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : hp,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 0
power_save_controller : N
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
!!HDA-Intel Codec information
--startcollapse--
Codec: IDT 92HD88B3
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x111d7666
Subsystem Id: 0x103c1526
Revision Id: 0x100105
No Modem Function Group found
Default PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Power-Map: 0x00
Node 0x0a [Pin Complex] wcaps 0x400583: Stereo Amp-In
Control: name="Front Mic Jack Mode", index=0, device=0
ControlAmp: chs=0, dir=In, idx=0, ofs=0
Control: name="Mic Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x0001173c: IN OUT HP EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x02a19020: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221401f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x0c [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00011734: IN OUT EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0d [Pin Complex] wcaps 0x400500: Mono
Pincap 0x00010050: OUT EAPD Balanced
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 1
0x1a
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x90a60130: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x12 [Vendor Defined Widget] wcaps 0xf00503: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 1
0x20
Node 0x13 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=63
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="STAC92xx Analog", type="Audio", device=0
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=63
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=1, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x17
Processing caps: benign=0, ncoeff=0
Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x18
Processing caps: benign=0, ncoeff=0
Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x0f 0x0f]
Power: setting=D0, actual=D0
Connection: 7
0x0c 0x0e 0x0f 0x1b 0x11 0x12 0x0a*
Node 0x18 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Control: name="Capture Volume", index=1, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=1, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x0d 0x0d]
Power: setting=D0, actual=D0
Connection: 7
0x0c 0x0e 0x0f 0x1b 0x11 0x12 0x0a*
Node 0x19 [Audio Selector] wcaps 0x300501: Stereo
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x1a [Audio Mixer] wcaps 0x200500: Mono
Power: setting=D0, actual=D0
Connection: 1
0x19
Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
Power: setting=D0, actual=D0
Connection: 6
0x0c 0x0e 0x0f 0x13 0x14 0x0a
Node 0x1c [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x9f 0x9f]
Power: setting=D0, actual=D0
Connection: 1
0x1b
Node 0x1d [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1e [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1f [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1d
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000034: IN OUT Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x21 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
Power: setting=D0, actual=D0
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Intel Cantiga HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862802
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6211: 8-Channels Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Node 0x03 [Pin Complex] wcaps 0x40739d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=03, enabled=1
Connection: 1
0x02
--endcollapse--
!!ALSA Device nodes
crw-rw---- 1 root audio 116, 9 Mar 29 10:14 /dev/snd/controlC0
crw-rw---- 1 root audio 116, 8 Mar 29 10:14 /dev/snd/hwC0D0
crw-rw---- 1 root audio 116, 7 Mar 29 10:14 /dev/snd/hwC0D2
crw-rw---- 1 root audio 116, 6 Mar 29 13:40 /dev/snd/pcmC0D0c
crw-rw---- 1 root audio 116, 5 Mar 29 13:40 /dev/snd/pcmC0D0p
crw-rw---- 1 root audio 116, 4 Mar 29 10:14 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116, 3 Mar 29 10:14 /dev/snd/seq
crw-rw---- 1 root audio 116, 2 Mar 29 10:14 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Mar 29 10:14 .
drwxr-xr-x 3 root root 220 Mar 29 10:14 ..
lrwxrwxrwx 1 root root 12 Mar 29 10:14 pci-0000:00:1b.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
!!Amixer output
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xd8a00000 irq 47'
Mixer name : 'Intel Cantiga HDMI'
Components : 'HDA:111d7666,103c1526,00100105 HDA:80862802,80860101,00100000'
Controls : 18
Simple ctrls : 10
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'Mic',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 3
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 15 [100%] [22.50dB] [on]
Front Right: Capture 15 [100%] [22.50dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 13 [87%] [19.50dB] [on]
Front Right: Capture 13 [87%] [19.50dB] [on]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
!!Alsactl output
--startcollapse--
state.Intel {
control.1 {
iface MIXER
name 'Speaker Playback Volume'
value.0 64
value.1 64
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -4800
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.2 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Front Mic Jack Mode'
value 'Mic In'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Mic In'
item.1 'Line In'
control.4 {
iface MIXER
name 'Headphone Playback Volume'
value.0 64
value.1 64
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -4800
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.5 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.6 {
iface MIXER
name 'Capture Volume'
value.0 15
value.1 15
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 2250
dbvalue.1 2250
control.7 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.8 {
iface MIXER
name 'Capture Volume'
index 1
value.0 13
value.1 13
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 1950
dbvalue.1 1950
control.9 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.10 {
iface MIXER
name 'Mic Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
control.11 {
iface MIXER
name 'Master Playback Volume'
value 64
comment {
access 'read write'
type INTEGER
count 1
range '0 - 64'
dbmin -9999999
dbmax 0
dbvalue.0 0
control.12 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.13 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.14 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.15 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.16 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.17 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.18 {
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 -3000
dbvalue.1 -3000
--endcollapse--
!!All Loaded Modules
Module
nls_cp437
vfat
fat
usb_storage
uas
michael_mic
arc4
ecb
cryptd
aes_x86_64
aes_generic
cpufreq_ondemand
ipv6
usbhid
hid
btusb
bluetooth
uvcvideo
videodev
v4l1_compat
v4l2_compat_ioctl32
snd_hda_codec_hdmi
snd_hda_codec_idt
i915
snd_hda_intel
drm_kms_helper
snd_seq_dummy
drm
joydev
snd_seq_oss
snd_seq_midi_event
snd_seq
snd_seq_device
snd_hda_codec
hp_wmi
i2c_algo_bit
sparse_keymap
snd_hwdep
snd_pcm_oss
i2c_core
acpi_cpufreq
iTCO_wdt
intel_agp
snd_pcm
uhci_hcd
ehci_hcd
snd_mixer_oss
usbcore
r8192se_pci
intel_gtt
sg
freq_table
snd_timer
video
r8169
iTCO_vendor_support
wmi
output
psmouse
battery
container
pcspkr
serio_raw
ac
button
mii
thermal
fan
cfg80211
evdev
processor
snd
soundcore
snd_page_alloc
rfkill
mperf
fuse
ext4
mbcache
jbd2
crc16
sr_mod
sd_mod
cdrom
ahci
libahci
libata
scsi_mod
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x0a 0x02a19020
0x0b 0x0221401f
0x0c 0x40f000f0
0x0d 0x90170110
0x0f 0x40f000f0
0x11 0x90a60130
0x1f 0x40f000f0
0x20 0x40f000f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D2/init_pin_configs:
0x03 0x18560010
/sys/class/sound/hwC0D2/driver_pin_configs:
/sys/class/sound/hwC0D2/user_pin_configs:
/sys/class/sound/hwC0D2/init_verbs:
!!ALSA/HDA dmesg
Hardware name: HP 420
Modules linked in: r8192se_pci( ) intel_gtt sg freq_table snd_timer video r8169 iTCO_vendor_support wmi( ) output psmouse battery container pcspkr serio_raw ac button mii thermal( ) fan cfg80211 evdev processor snd soundcore snd_page_alloc rfkill mperf fuse ext4 mbcache jbd2 crc16 sr_mod sd_mod cdrom ahci libahci libata scsi_mod
Pid: 788, comm: modprobe Not tainted 2.6.37-ARCH #1
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Last edited by mann138 (2011-04-11 15:57:00)

ewaller wrote:
What is under the switches tab?
Oh -- By the way, that picture is over the size limit defined in the forum rules in tems of pixels, but the file size is okay. I'll let it slide. Watch the bumping as well.
If you want to post the switches tab, upload it to someplace like http://img3.imageshack.us/, copy the thumbnail (which has the link to the original) back here, and you are golden.
I had a bear of a time getting the microphone working on my HP DV4, but it does work. I'll look at the set up when I get home tonight [USA-PDT].
Sorry for the picture and the "bumping"... I have asked in irc in arch and alsa channels and no luck yet... one guy from alsa said I had to wait for the alsa-driver-1.0.24 package (currently I have alsa-driver-1.0.23) but it is weird because the microphone worked some months ago...
So here is what it is under the switches tab

What to do if iPhone apps don't work after syncing with iTunes

Just wanting to share this with anyone who may have the same problem.
This is what I did: All I did was authorised my computer to transfer apps into my iTunes.
This may also help (depending on the cause of the problem)
http://www.iphonealley.com/tips/how-to-fix-broken-or-crashing-iphone-apps
(Thanks to Jim for sending this link but apparently my solution was a much simpler one)
Hope this helps! Cheerios!

Try this - worked for me:
on the iPhone, go Settings-->General-->Restricitons and either turn all Restrictions off OR if they are on make sure 'Installing Apps' is ON.

The skype video keeps rotating and microphone dones not work

Hi, I upgraded my laptop (Lenovo P400 touch) to windows 10. After the upgrade my skype is not working properly. I have installed the latest version of skype. My video in the skype keeps rotating and mic in the headphone is not working. People in the other end are not able to hear my voice propely.What is the solution to this? Karthik

Try this for the microphone:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00833331&lc=en&cc=us&dlc=en#N74
For the web cam, go into device manager and see if the web cam is detected and if the driver is loaded. Check to see if it is disabled or has a yellow ! or red triangle.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Hdmi iphone 4 don't work...

Since I have iOs 6 .. Hdmi out does't work properly... Only sound goes thru..

Pauly1991 wrote:
How is it irrelevant? If you're able to use some, why not be able to use them all? (regardless of whether or not the developers have included it)
They are different devices. They do not share ALL of the same features. On the iphone, the developer would have to provide this functionality. You may not like it, but that is the way it is.
How come a jeep can go trail riding and a Chrysler 300 cannot?
How come my alarm clock can play a cd and my watch cannot?

IPod/iPhone/iPad don't work with AirportExpress ... Help please ...

It's ok to pilot Itunes Music from all the Mac at home but with the Ipod or the Iphone or the Ipad, no sound go out ! I see the icone airport on the 3 devices, the music plays but i can't hear it on the amplifier-tuner deck. I buyed AirportExpress to leasten the music on the amplifier-tuner deck also from iTunes on my computers, but also from my iPod/iPhone/iPad without iTunes from the computers ... And it doesn't work !!! Do you know the solution ???

Thanks for your reply, however, I do have the j2se version tag set and when I have a Java Console window running along with my download the first line in the console window indicates it is using JWS version as 1.6 but the second line in the window indicates it is using JRE version as 1.5...I would like for both of them to be the same. So, I am getting the correct java version but something is happening with the JWS using the version from 1.6. Here's a snippet from my jnlp file:
<resources>
     <j2se version="1.5"/>
     <jar href="./ShipControlJavaPrototype.jar" main="true" />
               <jar href="./vecmath.jar"/>
     <jar href="./xith-tk.jar"/>
               <jar href="./joal.jar"/>
               <jar href="./log4j.jar"/>
     <jar href="./lwjgl.jar"/>
     <jar href="./vorbis.jar"/>
     <jar href="./xith_utilities.jar"/>
               <jar href="./swing-layout-1.0.jar"/>
               <jar href="./sqljdbc.jar"/>
     <nativelib href="joal-win.jar"/>
     <nativelib href="jogl-natives-win32.jar"/>
               <nativelib href="joystick.jar"/>
               <nativelib href="commsutilities.jar"/>
</resources>

IPhone Speakers Don't Work

The internal speakers of my iPhone stopped working. There is sound through the ear phone connecter and if it's in a cradle. No trama to the device that might have caused it. Any suggestions on how I might get them to work again?
Thanks

No. And I've gone into Settings and checked everything I could think of.

Iphone 4 microphones don't work

Similar Messages

Maybe you are looking for