Iphone 4 music won't work with bluetooth motorhelmset

I have a bluetooth motorhelmset (BMW Communication System). Using the iPhone4 works (phone function) but the audiostream doesn't. It does work with a bluetooth mp3-player. How can I force the audiosource to my bleutooth helmset?

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Similar Messages

  • Iphone 2.0 won't work with car stereo

    I Updated to 2.0. And my iphone works with my ipod stereo i bought 5 years ago, even with 2.0, but i bought a brand new stereo yesterday and when i plug it in through USB it says Invalid. Any ideas?

    The manufacturer of the new device may not have catered for iPhone use and as it does not say compatible you can't really complain. Some speaker makes have done this due to the fact that the radio signals from the iPhone interfere with the audio from the speakers.
    The older speakers came out before the iPhone existed and therefore it will not have anything preventing it from working with the iPhone, which I suspect the new speakers do.
    Ian

  • Shared music won't work with upgrade

    after installing the itunes update i (along with other friends) are all having this problem. the shared music folder is showing with the playlists available but when you try to listen to their playlists it just brings up your own playlist. all of the shared music that i'm trying to listen to are lists that have been working up until i installed the latest version. if anybody else is having this problem and has found a way to fix it could you please help me.
    thanks
      Windows XP  

    Maybe Minnimew's trick from this topic will fix it for you.
    Make sure your discussion options are set to allow you to read the whole thread.
    http://discussions.apple.com/thread.jspa?messageID=1823839&#1823839

  • IPhone 5 A1429 won't work with SKT?

    Hello, I recently bought an iPhone 5 online. I did a bit of reading before I bought it and found that in order for it to work in Korea I'd need to get the model A1429 GSM version of the phone to use with SKT. So I got that model from Negri Electronics, and took it into the SKT counter at Osan AB in Korea, and they tried 4 times to make the nano SIM card work with the phone, but there was no luck. Did I misread something online and order the wrong model? What are some possible reasons for the phone not working with that carrier? According to the Apple website that model should work with SKT so I'm really confused. Any help would be appreciated.

    It is possible that the iphone is broken? or the model is not supported my A1429 GSM / CDMA, and the one shown on the site A1429 GSM)?
    Link. http://www.apple.com/iphone/LTE/

  • Google Voice Won't Work With Bluetooth Headset After Jelly Bean

    I am SO frustrated. I had no idea I was installing the Jelly Bean update when I updated the software on my phone. Note to Verizon Communications team: PLEASE do a better job of communicating significant software updates. I would not have installed Jelly Bean. I learned long ago to stick with factory OS on my phones.
    Since the update, I noticed that I could no longer dictate texts and emails. Also, my call recording app no longer worked. I switched to Swype and it would work for a few minutes and then stop.  I could still use my bluetooth headset to make calls and S voice worked (although, like others here, I noticed that it's now worse--it doesn't recognize any contact names I request anymore). After trolling Android forums I found that the problem is with the bluetooth headset. You can still dictate when the phone's bluetooth is on, but when a device is connected, all bets are off.
    I almost did a factory reset, but then I read that a hard reset will not restore ICS, nor did it resolve this bluetooth Google Voice issue for the few people who tried it already. In fact, resetting caused more problems (eg., more battery drain and removal of Adobe Flash, etc.).
    Does anyone know how I can go back to ICS? Bluetooth and Google Voice are the two features I value most in my phones. This is a NIGHTMARE.

    rcschnoor -
    The Bluetooth/Voice Search/Dictation issue is a valid issue for the OP, a valid issue for me and oh yeah, the hundreds of other people affected by the, "Google Voice Search stuck on "Initializing" bug filed here on the Google Android Project page.  Here is yet another reference to the same issue from Android Central.
    The "Google Music freezing after Jelly Bean Update on Galaxy S3" is also a valid and documented bug located here also on the Google Android Project page.
    So I ask, how does sharing with these people that do have these issues, and are affected by them, that you are not experiencing these issues help in any way?  Isn't that the whole purpose of a community forum to help others?

  • My IPhone 4S suddenly won't work with my Bose dock

    I have two speakers that my phone has always worked on....all of the sudden they will not work.  My phone will charge but not play music.  They will still play my iPod so I'm fairly sure that its an issue with my actual phone.  Any help would be appreciated, thanks!

    Your phone still thinks it is plugged into the stereo. I don't remember how to solve this but perhaps you can search through the forum or maybe one of the members here will jump in on how to switch the playback to speakers.

  • IPhone 4 won't work with any music docking station. I have tried it on a Bose system and orbit. This has only happened since the last 2 iOS update. Appreciate any help .

    iPhone 4 won't work with any music docking station. I have tried it on a Bose system and orbit. This has only happened since the last 2 iOS update. Appreciate any help .

    you have two kickers in there.
    Cheers
    Pete

  • IPhone 4s bluetooth won't work with Clarion FZ709

    Actually the issue is that the iOS5 won't work with the Clarion FZ709 - it sees it and then immediately drops. I've reset the Clarion, reset the iPhone, same thing - it can discover it, then it loses it seconds later. Of course, dropping the version back to 4 isn't going to work for my iPhone, since it's new. I guess I could use my 3GS again, but I'm spoiled now with the features of the new phone.
    A brief search discovered this issue was mentioned here months ago - will there be any update to address this? It's apparently causing issues for many other manufacturers and OEM stereos too.

    Same problem with my Clarion FZ 709 after upgrading to iOS 5. Before this upgrade all works fine. Its no problem with the new iPhone 4s, its a problem with iOS 5. I could re-produce this problem with the new 4s and the older iPhone 4. Both are running iOS 5 and are still not longer able to connect via Bluetooth. After initial pairing the connection get broken after a few seconds. Yesterday i have upgraded both devices to 5.0.1 but the problem is still not fixed. From Clarion i got the feedback that they are not able to fix this issue because it seems that the problem depends on a change by Apple done within the new iOS. So hopefully Apple will recognize this problem and deliver a bug fix within the next iOS upgrade.

  • Iphone 4S won't work with bose dock

    Iphone 4S won't work with Bose Dock Speaker

    I have this same problem newly purchased iPhone 4s will plug into my Bose Dock. It will still charge and connect as if to play music but no sound will come out

  • FM transmitter won't work with my iPhone

    I bought a Premier FM transmitter from Auto Zone the other day. It has a 30-pin connector with an led panel that lights up when you connect it to an apple device. It's suppose to work with all 30-pin devices but doesn't work with my iPhone 4 (iOS 7.1.2). I have tried it with my iPod Touch 2g and two other iPhone 4's that belonged to my friends, and it worked with all three devices. Any explanation why it won't work with mine?

    "the Middle East" is a really big place. I suspect you bought a gray market hacked phone. Call Apple Care and give them the serial number. Maybe they can tell you if it's locked and to what carrier.

  • Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect; status bar looks good. But audio always comes out the speaker. Thx.

    Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
    PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.

    I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
    What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

  • Apple TV2 airplay audio (via Airport Express) works well with music, but won't work with any video.

    I have an ATV2 and Airport Express connected to speakers all connected to the same network. It all works with music, but won't work with any video audio. In my ATV's settings I've selected my AirPort Express speakers. It works for music, why not everything else? Is there a fix or work around?

    Netflix is first on that list...What I mean is, if there is a feature that allows for a wireless audio connection to the Apple TV, why wouldn't the developer allow it. To keep me from enjoying a more convient connection? I can have the same listening experience on a wired connection...

  • Outlook 365 retrieves same mail over & over -- stops and restarts -- won't sync to iPhone -- won't work with blue tooth in car

    Outlook 365 retrieves same mail over & over  --  stops and restarts  -- won't sync to iPhone  -- won't work with blue tooth in car  'm using Win 8

    Hi,
    How did you set up your email on your Ipnone? Please refer to the article below and try the method to set up your email:
    http://office.microsoft.com/en-in/office365-suite-help/set-up-email-on-apple-iphone-ipad-and-ipod-touch-HA102818554.aspx
    Do you use Outlook desktop app? If you are talking about a question related to Office 365 web app, it's better to post your question to the Office 365 forum. You will
    get the most qualified pool of respondents there:
    http://community.office365.com/en-us/forums/default.aspx
    If you means that the problem is with your Outlook desktop app, please try to log on your OWA and check if the problem persists there.
    Please let me know the result.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Irish iPhone won't work with German simcard

    Irish iPhone won't work with German simcard! Can anyone help!? I bought it prepaid in Ireland with u2 but my German u2 card won't work in it?! Thanks for any advice!

    Yes, but they are different firms and O2 Ireland sell locked phones as far as I know so the german sim is not meant to work.
    From Apples site O2 Eire can unlock but not sure how well that would work if you are back in Germany now, as it usually needs to be active in the carriers country on their network.

  • IPhone6 won't pair with BlueTooth on MBPro

    IPhone6, iOS 8.1.1 won't pair with BlueTooth on MBPro nor can I use it as Blue Tooth "hands free" device in my car. Blue Tooth is enabled on the phone and on the MBPro.  I try to "connect to network" on the iPhone, using BT preferences on the MBPro, but get the message "can't connect" . On the MBPro, have gone to Sys. Pref., Network, can see the phone but again get the same message when I try to connect.
    On the phone under the green button (which enables) the BlueTooth, I see the word "other devices" and a spinning beach ball as the phone tries to find additional devices but no joy.
    Have Googled the problem, am reading similar issues - people seem to think it was the new iOS 8.0 and 8.1.1 was supposed to be a fix but it isn't.  Any thoughts out there would be much appreciated.

    Great - finally got our iPhones6 "discoverable" on our car. Whew!!!  Thank you so much.
    But, still can't pair our iPHone with my MBPro.  Follwed directions on your link but no joy....<sigh>
    The MBPro does NOT find the iPhone device. Don't know why......
    However, the biggest problem is solved, hopefully.....that being the car/phone connection.
    Appreciate the assistance.
    thx

Maybe you are looking for

  • Commitment item not picking while MIRO posting for Service entry sheet

    Hi to all, We have activated Fund Management in middle of the year where there were purchase order completed to till MIGO. When we do MIRO now system unable to pick commitment item from FMDERIVE. We have created Commitment item as 50/3 combination (

  • Tried to update iphone via itunes and now all stopped working

    So, after some issues with drivers over the weekend, I decided today to finally update iphone. Attached phone to laptop, started upgrade. Now it has completely frozen with the itunes icon on the screen alongwith a usb cable. According to itunes the p

  • Ytd,ptd,qtd in dashboard prompt

    Hi how to use ptd,qtd,ytd as dashboard prompt i created netamount ptd,ytd,qtd in rpd my metric is netamount in dashboard if i select ptd then give ptd values selct ytd give ytd netamount qtd also same its in dashboard change all the reports in dashbo

  • CONCATENATE date and time into a text variable

    Hi ABAP Gurus,   I would like to retrieve current system date and time and concatenate into a variable. I would really appreciate if someone could help me. I have the following code and i seem to get some kind of error. I would like my output to be l

  • XSU bug? update nested tables

    crashed if locale RUSSIAN and update varchar2 contain simbols: " and : oracle.xml.sql.OracleXMLSQLException: Идентификатор привязки должен иметь ненулевую длину.     at oracle.xml.sql.core.OracleXMLConvert.getSchema(OracleXMLConvert.java:2885)     at