Iphone 4 not recognized and will not sync after latest itunes update. I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.
iphone 4 not recognized and will not sync after latest itunes update. I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?
Similar Messages
-
I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7
I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7
-
My iPad 2 has given me many months of hassle free usage. I have recently [earlyApril] updated the software. Now every time I go to use it I am forced to hold bottom and top button to boot IPad .Eventually it kicks in and as long as I'm using it its fine. If I leave alone it goes down and requires rebooting.
Have tried total factory reset and it continues to malfunction. apple have informed me that a hardware repair would be £206 for a fix or replacement.I find this unacceptable considering the iPad has been well cared for & never dropped etc .Any help greatly appreciated.So, I have managed to get my iPad to stop showing the "connect to iTunes" screen. I did this by plugging it in to my husband's PC and trying to restore from the backup I left there many many months ago.
The restore FAILED error 3194 (I looked it up it's the same error as the one I got on my macintosh "device is isn't eligible for the requested rebuild"
But the restore attempt mad the "connect to iTunes" screen go away, now it has 4.3.1 again with the special multitouch update.
BUT I STILL CAN'T RESTORE! Why not? I've been searching all over the web and I can find nothing that helps.
It's not like I jailbroke it... can anyone help me please? -
Dear All,
I am using MSSQL SSRS 2008.
All the reports run properly when viewed via a web browser. However for subscription, I am having a strange
experience.
The subscription having intermitten failure. I need to execute multiple times to get it work.
Following is the exception I am getting:-
Failure sending mail: The user or group name 'xxxxx' is not recognized.Mail will not be resent.
Failure writing file DailyPolicyExportCDN_ST@timestamp : The user or group name 'xxxxx' is not recognized.
Following is the exception I retrieve from log files.
webserver!ReportServer_0-2!1b0c!07/31/2014-05:25:09:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeClientDisconnectionException: A client has disconnected from the Report Server Web service application
domain ReportServer_MSSQLSERVER_0-2-130512716074991980. No corrective action is required. An error code has been submitted to ASP.NET to release the connection. The error code is 800708CA. ---> System.Runtime.InteropServices.COMException: This network connection
does not exist. (Exception from HRESULT: 0x800708CA)
Any idea what went wrong?
Thanks in advanceHi NeoCK,
According to your description, you can access your report successfully, but it fail to send e-mail subscription. Right?
In this scenario, since you can access the report successfully, so this user has permission on report server. Please go to E-mail setting in your Reporting Services Configuration Manager, check if the current user has permission on that SMTP server.
If this is still not working, please recreate the subscription and try again.
Reference:
SUBSCRIPTION
ERRORs : Failure sending mail: The user or group name 'CB_OFFICE\XXXX' is not recognized.
The user or group name 'MYDOMAIN\myuser'
is not recognized
SSRS
2008: Failure writing file ... The user or group name 'domain\user' is not recognized
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
My new 4S iphone is not showing in itunes and have followed all trouble shooting tips???
My new 4S iphone is not showing in itunes and have followed all trouble shooting tips. It does show in iphoto and wants to download photos. Any suggestions???
I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple
-
Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?
Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-) -
I am trying to update my iPod touches and keep getting an error message saying iTunes could not back up my iPod because a session could not be started. I have followed all trouble shooting advice found on the apple website, unplugged and replugged the device, restarted my computer, etc. Any suggestions would be much appreciated. Thanks
I have the same issue, except I can't even sync.
-
I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
TS1702 I keep getting errors and i have tried all trouble shoot options.
I keep getting error 0xE8000041 and i have tried all trouble shooting options on my ipod touch 2nd gen running ios 4.2.1
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
-
I have purchased TRANSLATE SMS and it does not translate.
I have done all the trouble shooting that apple advise and still nothing.
Has any one got any suggestions?When you contacted the developer, what did they say?
-
I have just installed the latest version of iTunes version 11.1.5.5, now I have no playlists. So I uninstalled and tried again, now I have no songs also! Also my account balance has gone down by approx £5, which incedently happened the last time I installed an update. Please help
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
USB Device Not Recognized (&IPOD WILL NOT TURN ON)
I have had an iPod Shuffle G2 for 6 months now with no problems until today.
It went flat when I was at my friends place so when I got back to my mums I plugged it into my laptop and it told me "USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned and windows does not recognize it" I thought there was just a prob with that port in my laptop, so I put it in the other one. So I though Ill wait until I get to my nan and pops and put it in there computer which is where I sync it. Same problem in both ports. Except on this computer the orange light is on but doesnt flash.
Now my iPod doesn't turn on at all..
Which is fantastic..
Help yeah?
My mum is gonna kill me.thank you for you help so far. I am very frustrated with this thing. I have been trying to correct this problem for hours.
I will try to disable virus protection. but I will have to enable virus protection again. what should i do? -
Iphoto not recognizing Canon raw files even after latest update
I have a Canon 5D MkII and the camera was listed in the last iPhoto update as one of the cameras that iPhoto will allow camera raw downloads with. It gets about 3/4 the way through my downloads and just freezes the whole computer to where I have to power off to reboot. Then it wil come up with a box that says the raw files are unreadable or unrecognized. Very frustrated. Help please!
If you want to shoot RAW, you better forget about iPhoto and start using an application that's been designed for that purpose like Aperture, Lightroom or even Canon DPP.
iPhoto sort of handles RAW files since the support is built-in to the OS, but its tools are inadequate at best. -
My ipod nano is not showing up in the left hand column of itunes. It says connected on the ipod and I can find it in my computer but its not there on itunes. I need it as I want to restore it to factory settings. I have tried the troubleshooting methods that are on the Apple website but no luck.
Also my ipod is not playing. I found a way to upload all my music to my new computer. I followed a guide given to me on wiki and it worked. However, since then I cannot get the ipod to play. The menu is there, it turns on, all the playlists are visable but when I press play it does nothing or flicks briefly on to the page to play but then flicks back to the list again. I have tried all the troubleshooting on the Apple website but again nothing. I wanted to restore it to factory settings but to do this you have to be able to access the ipod in the left column on itunes which obviously I can't do. That was happening before the ipod stopped working. The two issues are separate.
Thanks and hope you can help me.I have sorted it myself!!
Ipod is now in the top right corner, last time I clicked on it, it ejected it but by clicking on the actual ipod icon then it brings up your ipod. I restored it to factory settings and synced all my music and it now works again. Hope this can help anyone who ends up with the same problem. -
We have did home sharing with my IPAD and my daughters IPAD, both Generation 4. We have tried her Mac Pro Book as well...
It sounds to me like there are two separate processes being intertwined above:
1. Setting up your daughter's MacBook with identifying info; e.g., Apple ID for the user account on that machine.
2. Transferring the iTunes library (a very different operation).
Have you used Apple's Migration Assistant to move your daughter's information from her old machine to the MacBook? That would have avoided this whole issue.
If not, either start the process over and use Migration Assistant, or try to more carefully and precisely define exactly what you did to accomplish this transition. You said, for example, "there was already an Apple ID assigned to this computer." That statement almost certainly did not originate with iTunes.
Maybe you are looking for
-
How many iphones and i touches
we have a family of 4. my wife has an iphone and i will have one when my contract is up in aug. we are getting an i touch for my daughter for her birthday, i already ordered it. someone my wife works with is saying you can only sync 2 iphones per i t
-
Locally I have 32 bit windows and the server is 64 bit. When I try to change the provider locally to SQLNCLI11.1, the connection test succeeds but when I close the package and reopen it the provider is set to 10.1 again. Do I need to install a driver
-
Hi All, I am working on ECC6.0, I can see around 80 updates failed due to the following reason. <b>ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC</b>. what should i do now? how can i come out from this? kind regards, praveen
-
IPhone 5 shuts down at 37% battery power...
This has happened 6 times now - all random times (twice when using FaceTime, twice when taking pictures and twice when texting/emailing). When I try to reboot phone I get screen that shows no battery power remains and that you need to plug in phone.
-
Why these key figures roll up but others do not after the data load
Experts, I have 7 key figures on target cube, which all are direct mapping from source cube. After loading data from source cube to target cube, 4 of the KFs got auto rolled up by themself, but the rest do not. For example, on source cube, one stu