Iphone 4 not seen in windows 8.1 file explorer
IPhone 4 IOS 8.3 can not transfer photos to Window 8.1
This made me panic for a moment too, but the upgrade just made my phone forget my computer. When I unlocked my phone, it asked me whether or not I wanted to Trust the computer I was plugged into. After choosing Trust, then unplugging and plugging back in, it showed up again. Hopefully that's all that's happening for you too.
Similar Messages
-
Attachments and history of my emails are not seen by Windows users
attachments and history of my emails are not seen by Windows users
Just guessing at what you mean, try this:
In Mail, while composing a message, go to Mail's menu and click:
Edit > Attachments > Always send Windows-friendly attachments -
HT1414 iphone not recognized in windows or itunes
iphone not recognized in windows or itunes
My iPhone 5 was not being recognized by two different computers, windows 7 and windows 8.1. My wife's iphone 5 had no issues. I followed all the advice on-line from re-installing iTunes, resetting my phone ( as new and backed up from cloud), device manager troubleshooting, re-install drivers, different cables, different ports. Oddly enough in the fianl analysis my iPhone only gets recognized when the cable is insert in one way into the phone. Flip the cable and it goes straight to "unknown device". Doesn't matter which cable I use, it only works on one side. My wife's works both ways. I can't explain it, but there it is. I put a dot with a permanent marker on the cable to identify which side goes up.
-
Satellite A - DVD drive not seen by Windows Explorer
THe DVD deive on D is not seen by windows explorer. It used to work but has now disappeared. The dvd hardwars starts up at boot then ceases.
Any ideas anyone?Try removing the CD/DVD Filters from the Registry.
When CD/DVD related software is installed (such as iTunes, Nero, virtual CD software), they install filters into the registry, which can cause compatibility problems.
1) Run Regedit (Start -> Run -> Regedit)
2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
3) In the right pane, delete the "UpperFilters" key, and delete the "LowerFilters" key.
4) Reboot.
If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).
This utility can remove the filters for you:
http://www.csd.toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe -
Does anyone know why you can't view .dng RAW files as image thumbnails in Windows 8.1 file explorer even with the Microsoft Camera Codec Pack installed.
Other RAW files show up as thumbnails no problem (e.g. Nikon .NEF files). I could view dng's as thumbnails in Windows 7 but not with Windows 8.1. Perhaps Adobe hasn't shared the appropriate info. for Microsoft to make it happen?
Cheers if you know how to see the dng thumbnails and can help me do the same.
MichaelI know the DNG Codec for Windows 7 allowed one to view DNG thumbs in Win 7. Wouldn't it work for Windows 8.1 too?
-
Ipod not seen by windows or itunes
Hello, I'm totally frustrated and have been searching for hours. Please someone help.
- Nano 8 gb
- Windows xp
Neither Windows (my computer) nor Itunes sees my ipod. Ipod is working fine: did the menu/select thing, cable is good.
When I plug the ipod in the usb port I hear a bleep and I get a message bottom right "new hardware found ipod"and the icon is a usb cable. Ipod is not in My computer window. Ipod is not seen by Itunes
Tried Device Manager/I see Ipod with a ? Yellow. If i right click on it and do update driver the ms computer management system crashes and sends error report.
I tried dowloading the USB driver and placing it in the directory, but I got stuck because there is no windows/inf directory. I tried to update the usb driver with the same ms crash.
I'm completely frustrated, please can someone help me.I was having the same problem the other day. I'm not sure what it was but I think it has something to do with the i tunes and i pod 1.2 update.
What I did was:
1. Uninstall i tunes
2. Restart my computer
3. pluged my ipod in a slow usb line
4. waited until my pc recognized it in there. It took a little while.
5. re installed i tunes from apple.com
6. waited until i tunes recognized my ipod
7. updated my i pod with my library it took a long time because i was in the slow usb plug.
8. re plugged my ipod into a 2.0 usb line
9. i tunes recognized it.
10. I then updated my ipod to the new 1.2 version
11. The problem started happening again
12 I repeated what I did before and now it is working.
It was very frustrating! I hope it works for you.1 -
5th Gen IPOD - Won't Sync and Not Seen by Windows
Help!!!
Tried the 5 R's. I have the IPOD in Disk Mode but whilst it will happily charge, it still is not seen by ITunes or Windows Explorer (though is visible inDisk Defragmenter). I have already un-installed and re-installed ITunes etc.
Prior to putting it into Disk Mode the IPOD still had my library on it and owuld happily work.Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB -
I installed Windows 8.1 through BootCamp and Bluetooth device is not recognized by Windows. I am talking about the new 2015 12' macbook.
It is not seen in the device manager list.
Any Help?Can you check the version of BC drivers in bootcamp.xml on your USB?
It should look similar to
<?xml version="1.0"?>
<?xml-stylesheet type='text/xml' href='test.xsl'?>
<!--Information on Boot Camp build-->
<BuildInfo BuildNumber="5621" ProductName="Boot Camp">
<MsiInfo>
<ProductManufacturer>Apple Inc.</ProductManufacturer>
<ProductVersion>5.1.5621</ProductVersion>
<ProductCode>{FA2B2C2A-EA41-495A-9308-60726125D562}</ProductCode> -
My iphone is not seen as a device on my imac. Can't see it in itunes. help.
Itunes opened, iphone pluged. Un pluged the iphone et repluged. It should appears in itunes
-
IPhone not recognized on Windows 7 but recognized on iTunes
I follow all the steps to make my iPhone recognized on iTunes.
But it is not recognized on Windows 7. It don't appears on My Computer, and it does not ask for install driver when I plug it in.
It is very strange!
Sorry for my terrible english.
Please help me!when we connect iPhone on windows 7, there is 2 device drivers it supose to install. One of then is called Aple iPhone and it is automaticaly installed by windows. I supose whe this is not listed is when we can't recognized the device on explorer, but in iTunes. Any sugestion to how do I install Apple iPhone icons mannually?
-
E3000 Media Server not seen by Windows Media Player (v 12.0) on Win 7
I've enabled the Media Server on my E3000 router. My PS3 can see the server and play media from it by my PCs can't!
I'm using Windows Media Player v 12.0 on Windows 7 and some older version on Windows XP and it's my understanding that the Media Server should appear under the "Other Libraries" section but it does not.
Am I doing something wrong? Is there a bug in the E3000 firmware (I have the latest as of this date) or is the Media Server simply not compatible with Windows Media Player?
If it's an incompatibility issue, can someone please point me to a compatible media player for Windows 7?
I did read a post about a firmware upgrade on the 4200 that broke the media player, but I don't know if such a problem exists for the E3000.
Thank you,
Martin.This is what you can try in getting the Computer to see the media server on the E3000:
(Obviously make sure you have the media server enabled on the router and at least one folder shared....and make sure you have scanned the folder(s))
1) Turn your computer on.
2) Disconnect your external usb drive.
3) Pull the power on the E3000.
4) Connect the external usb drive.
5) Plug the power back into the E3000.
Then see if that works or not.
If the issue still persist then here is the link which may help you: http://h10010.www1.hp.com/ewfrf/wc/document?docname=c01832417&tmp_track_link=ot_recdoc/c00859236/en_... -
Not seen in windows (or anywhere else!)
I have a problem..
I was given an Ipod - I am assuming it is a mini, but I'm not 100% certain - All I know is it has a touch wheel, is marked with 4Gb on the back, and it has a monochrome screen.
There were NO cables, manuals, or CD's with it.
I went out and purchase a FireWire cable for it, and it is charging up fine with that.
However, I seem to be unable to do anything else with it!
It does not appear in windows or in ITunes. I have read through all the advice I could find but the Ipod doesn't even appear in places where I should be able to fix this problem (nope, not even in Administrator Tools under Control Panel!)
When connected to my PC, the normal Ipod menu comes on screen, but no other messages or icons (ie: do not disconnect, the sad smiley etc).
So any suggestions as to how I can make this work?
I AM able to reset the Ipod (flick hold switch on and off, hold menu and select for 6-10 seconds etc) and I DO see the apple logo when I do this.
Please help!
Giric,
The normally tehno-savvy,
clueless Ipod user.Are you sure it is an Ipod?
The reason i ask is that there are cheap mp3 players knocking about that look like ipods but there are in fact made to look like them but are no good. -
When I plug my 3gs into my windows 7 pc it doesnt show in either windows or itunes... What should I do?
Make sure your usb to dock connector cable is good, and that you have a good connection to the dock connector on the bottom of the phone (unobstructed by your case). If still not detected in windows you probably need to uninstall iTunes and all of it's components as described here: http://support.apple.com/kb/HT1923, then reinstall iTunes. (This won't touch your iTunes library or media.)
-
IE 11 Will not allow ftp to open in File Explorer
I have 'just 1' machine so far with this problem so i am fairly certain it is a setting or registry entry but can not for the life of me figure this one out.
Windows 7 Pro 64 bit - IE 11 - all current updates.
When i open Windows Explorer (file explorer) and I enter an FTP site address, IE 11 opens and takes me to the address.
This would be all fine and dandy except for uploads yeah?
I used to be able to, in IE, go VIEW -> OPEN WITH FILE EXPLORER but now when I do that there is 0 response from the computer.
I have checked the boxes for Allow FTP view outside of IE and I have checked the box for Use Passive Mode.
Oh, Behavior is the same whether the fire wall is active or not.
What am i missing.
Thanks,
James
dogdaynoonI just don't know exactly what I am looking for.
If you only have one trace it helps to have a hypothesis to test. Otherwise if you have two which are essentially the same except for one significant difference, as I mentioned you should be able to filter coarsely, spot a divergence and then investigate
the cause of it. In a general scenario I imagine you would only have Process & Thread as a coarse filter, e.g. see the dispatching of tasks and threads and the loading of their modules. However, for your case, it may be sufficient to compare
Network events, spot a divergence in that sequence and then dive in to see what more differences there were which caused it.
Good luck
Robert Aldwinckle -
Can't access NAS through Windows 8.1 file explorer anymore
This used to word perfectly, but since I reinstalled my Windows 8.1 setup I can't access my NAS through Windows Explorer anymore.
The weird thing is: I can still access it by logging in into the admin console via "http://ix4-300d/manage/manage.html" in IE.
From here I can access and edit my shares, download stuff, etc.
But for some reason my PC can't find my NAS anymore using file explorer -> Network -> \\ix4-300d\.
This sucks, cause now I can't copy anything to the NAS anymore (which used to work perfectly).
I guess it must be some network setting in Windows, but I can't find it.
Anyone knows what could be the problem?
Both the PC and the NAS are in workgroup "WORKGROUP" btw.
Thanks!! http://i.imgur.com/TMJtjzS.jpgHello ExReey,
First thing to do is make sure that you have the correct IP address (you can find this on the ix4 display) and try the procedure using the IP address instead of the device name>
I would also try manually mapping the Shares:
https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=windows%208%20map%20network%20drive
Also, I cant open any Imgur links here, is that an error you are trying to show me?
Maybe you are looking for
-
Is there any way to limit the number of RFC calls from xMII to SAP R/3
Hi All! I wanted to know whether the number of simultaneous RFC connections made from xMII to SAP R/3 system can be controlled in any way. Suppose we have a scenario wherein some million Sales Orders or Production Orders are to be updated in SAP R/3
-
.mac web gallery and iPhoto '08 movies, which format?
Hi Folks, I ran into a problem over the weekend working on a movie project. As you might have read in the forums, there is no way to load up a movie to .mac web gallery with password protection. The suggested workaround by Apple is to import your mov
-
When i plug my network switch into airport extreme it affects my wireless operation
I have a gigabit wired network with a 16 port unmanaged switch. I have a TWC cable modem, connected to the AE Tower. When I plug my wired network into one of the LAN ports on the AE, I can no longer connect to the internet. I have my Extreme set to "
-
Debugging a vc dll from the diadem?
Hi all, I want to debug a vc dll that is being used in the diadem script. I Have registered the dll in the diadem. My primary aim is to debug the vc++ code from the diadem once the function in the vc dll is occured in the diadem script. My version
-
How do you revert the BBM from 5.0 to the previous version?
I just installed the BBM 5.0 and don't like the photo feature, how can I uninstall and install the previous version?