IPhone 4 on iOS 5 not charging, getting a error saying "Charging is not supported with this accessory" Help?

I got a replacement of this iPhone 4. Probably a month or so. I've been taken good care of this phone, but I keep getting this pop up saying "Charging is not supported with this accessory". I've blowed on this 30 pic connector, cleaned it and everything and there still haven't been a solution. I restored it and restore it to a backup. I have to disconnect my iPhone in order to get it to work. Any suggestions? Help?

No, it is a problem with YOUR phone, not all phones. My phone does not have this problem. You have dirt or moisture in the connector on the bottom of the phone, a bent pin, or a bad cable. Get a magnifying glass and look into the connector. Clean out the lint and fluff that is almost certainly there. A dry toothbrush is a good tool, or a wood toothpick. Inspect for bent pins. If you see a red dot in the connector opening it means that your phone has water damage.

Similar Messages

  • I downloaded itunes but when i try to install i get an error saying "There is a problem with this windows installer package. a programe required for this install could not be run" can anyone help?

    I downloaded itunes but when i try to install i get an error saying "There is a problem with the windows install. A programe needed to install could not be open"
    can anyone help?

    Ok, Below is what worked for me somewhat. 
    Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
    http://www.apple.com/itunes/download/
    Now download a trial version of WinRAR:
    http://www.rarlab.com/download.php
    Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
    It works now BUT there are still problems.  It is not allowing or recognizing my Cd/DVD player and i CANT burn.  Looking still for this fix.

  • 'Charging is not supported with this accessory' HELP!

    So here it goes...
    i got an iphone 3gs for christmas and it went fantastic, i jailbroke it and got everything i needed. in february, i came home from college and saw a message saying charging is not supported with this accessory when i tried to charge it with the charger i have been using for a month! so i still had my warranty on it and i sent it off. i recently got a new one (refurbished) on friday so i have had it exactly a week now. all was well once again and just a second ago i got the message again! but this time it wasnt permentant, i unplugged it and plugged it back it and it was fine for around 5 mins and did it again!
    i am using the mains to charge it and it is a USB plugged into a plug which goes in the mains, i am using 5.0.1
    what could be the problem? at first i thought it was a dead battery but its happened again so im thinking the voltage in my room? Please help me!!!

    8ooth wrote:
    i jailbroke it
    Discussing hacked and jailbroken devices is a violation of the Terms of Service here.  Jailbreaking voids your warranty and forfeits your right to support from Apple or on these forums.
    That said, try cleaning the dock connector with a dry toothbrush.

  • 1st gen ipad - charging not supported with this accessory - help?!

    my ipad has recently stopped recognizing my original wall charger... i have tried other chargers and cables, cleaning the connections, charging on a dock (which never charged it in the first place, but i thought it was worth a shot!) if i leave it plugged in it slowly climbs a few percent, but i doubt if i left it plugged in for a solid week it would ever get to 100%
    i'm currently trying to rest my ipad as well and the internet connection i have here in nunavut is painfully slow to say the least, it never goes further than about 3-400 MB before it times out... and of course i can't recall the passcode to unlock the restrictions to do it manually :S
    anyone have any ideas?
    thanks in advance!!

    This usually indicates a problem with the dock connector on the bottom of the iPad.  If you haven't already tried, try gently brushing it with a clean, dry toothbrush and blowing on it with a can of compressed air.  Also closely examine it for any bent pins that may be shorting.  If no joy, make an appointment with the Genius bar at a nearby Apple store to have it examined.

  • Charging is not supported with this accessory help me please

    help me please

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • IPhone error "Charging is not supported with this accessory"

    I keep getting error "Charging is not supported with this accessory" ever since the last update. I only get this message when iphone is locked and not plugged in to anything. When phone is locked the message keeps popping up every few seconds, consiquently I'm having to charge at least twice a day!
    Error only occurs when not plugged in & iphone locked & doesn't make any difference if wifi on or off
    Connectors have been cleaned
    iphone has been restored
    iphone has been re-booted
    Nothing seems to work and after researching, all similar posts seem to be pertaining to actually plugging in to something and the fix was "clean connector" this is not my problem, error only happens if not plugged in. I'm assuming it's a bug from the last update but my girlfriends iphone is fine.
    Would someone please help as the drain on my phone is rediculous now, it wasn't that good to start with but now the phone is pretty useless unless I'm near a plug! It's also very annoying having the screen constantly coming to life with this error message, especially at night.
    Thanks in advance for any help.
    Wayne.

    I've not been able to find any new solutions so I thought I would try repeating everything I've tried again. I started by re-cleaning the connector as, logically my error only occurs when not plugged in to anything. To my amazement the problem is now resolved, I did take quite a while cleaning this time using toothpicks, cotton buds and nail varnish remover. So I geuss I should have cleaned it better in the first place! Doh! Anyway it's FIXED!!

  • On my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

    on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

    Clean the iPhone charging port with a clean dry toothbrush.

  • How to fix error charging is not supported with this accessory (iphone 3gs)

    how to fix error charging is not supported with this accessory (iphone 3gs)?

    This can mean there is some dirt, lint, or foreign material in the iPhone's dock connector port and it doesn't take much, or the dock connector port has damage with the pins or there is some moisture damage.

  • HELP!!! "Charging is not supported with this accessory" suddenly happening CONSTANTLY with iphone 4

    Suddenly without warning my IPhone 4 has been giving me a "charging is not supported with this accessory error" every time I plug it into ANY charging device.  That means my car charger, USB to the PC... USB to a macbook pro... Directly to the wall with the included charger, etc.  It doesn't matter.  I guess I'm past the 1 year warranty so Apple is not any help.  Essentially I'm supposed to accept that my $200 (with a contract) phone has a 1 year life span and that I should be completely fine with it becoming useless out of nowhere.  Here's some facts.
    #1 - It has nothing to do with 3rd party accessories.  One day it was working... one day it wasn't. 
    #2 - I cleaned lint out of the charging port on the phone.  That was the first thing I tried. I used compressed air to blow it out, I used a soft bristle tooth brush...  It's lint free.  It has nothing to do with lint.  I understand this is the most likely cause of the problem.
    #3 - When I plug it into a PC or macbook via USB, I'm able to access the IPhone 4 like I ALWAYS have.  In other words, I can see pictures, I can back up the phone, I can restore the phone, I can transfer music, sync, etc.  So this would presumably rule out the idea that it's the dock connector, right?  Why would USB work, but the charging function will NOT work?
    #4 - On that note, I was able to update the software to the latest version 5.1.1.  That was one of the first things I tried.  No dice.  I still get the "charging not supported with this accessory" error literally every time I plug it in with a yellow triangle icon... Seen here for example: http://tapatalk.com/mu/4c5f44af-af20-d86c.jpg .
    #5 - So since it's not charging, the phone inevitably dies.  Here's the weird part... if I leave it plugged into the wall/pc/mac/car when it's dead... eventually it will charge enough to turn back on.  But once it's back on... that **** error will pop back up, it will stop charging... and inevitably die again.  So then... that would suggest that it actually IS capable of taking a charge... it's just that something in the software is preventing it from charging when the software is active, no?  Am I off base here?
    #6 - So I decided I'd take it to the genius bar to have them look at it.  Right before I did that, I got the brilliant idea to try using an alcohol swab on the dock connector just to make sure it was super duper extra clean.  Oddly enough, it suddenly started working without the error.  It was working on every charger I tried.  Wow.  I thought I had fixed it.  A day later it started happening again, though.  Bizarre.  I've tried the alcohol swab thing again and it didn't make a difference... maybe it was just a fluke.... the one day I take it to the Apple genius bar and it works.  Go figure, right? 
    #7 - The only helpful thing the tech at the Apple Genius Bar was able to tell me was that the phone did NOT have any kind of water damage.  That rules that out.  No water damage in the charging dock OR the headphone jack.  So there's that.
    #8 - Since it's no longer under warranty... I took it upon myself to buy a replacement battery via Amazon.com and installed it myself.  Didn't make a difference... still the same error.  
    What, if anything, can I try?  Could it really be the dock connector?  Should I try replacing the dock connector?  Is there any software-related thing I can try?  Has this happened to anyone else?   Apple has essentially told me it's my problem.  From my perspective... any product that randomly stops working a little over a year is a faulty product.  I'm not pleased at all.

    Tried at least 6 different cables.  It isn't the cable.  All of them worked one day... then stopped working the next day.  My girlfriend has an identical Iphone 4 and all of the cables still work for her. 
    Interesting point on the data and power using different pins.  So your suggestion would be to replace the dock connector?  Found this on Amazon: http://www.amazon.com/Apple-iPhone-dock-connector-cable/dp/B003UGVOO2/ref=sr_1_1 ?ie=UTF8&qid=1338277549&sr=8-1 ... and found a tutorial online:  http://www.ifixit.com/Guide/Installing-iPhone-4-Dock-Connector/3147/1#.T8SG_sXWu -o  ... Sounds like that might be my best bet here.
    It's just odd to me that the phone gives me that error and refuses to charge... then inevitably dies.  But once the phone is dead, it starts charging enough to actually turn back on.  Isn't that slightly odd? 

  • Charging is not supported with this accessory iPhone 5 and lighting adapter

    I just received my 30 pin lighting adapter for my iPhone 5 and connected it to my existing BMW (2008 335i) factory 30 pin cable.
    The battery changes to the charge symbol for a few seconds and then I get a error on my phone that says "charging is not supported with this accessory".
    Other than that I am able to search and play music from my phone through my car's audio system without isssue.
    I have had this car for 4 years and used it with my 3rd generation iPod touch without issue. Wondering if anyone else is experiencing
    charging issues with the new adapter and their exisiting setups,

    I purchased the following adapter from Amazon for my 2009 335i, and all functions (including charging) work fine on my iPhone 5:
    http://www.amazon.com/gp/product/B004E5J61G/ref=oh_details_o03_s00_i00

  • "Charging is not supported with this accessory" with iOS 4.2

    It looks like iOS 4.2 is not supporting the older USB cables that have the longer plugs with the two fastener buttons on the sides.
    Since yesterday (after my update to iOS 4.2) I am getting that message on the iPhone screen:
    "Charging is not supported with this accessory"
    Now I have to spend another $29 for a cable that used to work until yesterday morning.
    I am just not getting why Apple would render cables useless with a software update.
    Has anyone experienced the same issue?

    My two cents... This may eliminate some options...
    I installed iOS 4.2 on my iTouch last night. I went to set up my link with Ubuntu on my main machine and got the message "Charging is not supported with this accessory" when I plugged into my USB port. After reading this post I tried another USB cable, and a reboot, but neither worked.
    I tried plugging my iTouch into a USB charging device USING THE SAME TWO CABLES I USED WITH MY PC, and the iTouch behaved normally.
    I tried plugging it into a Windows XP laptop and it behaved normally. I tried plugging it into another Ubuntu computer, and it behaved normally, although this computer is running a slightly different version of Ubuntu.
    My iTouch is configured in a standard fashion.
    I am concluding that the problem is not the cables, and it is not the connector at the base of my iTouch.
    My suspicion is that one of my computers is running at a slightly different USB voltage than the others, and that this difference is somehow triggering a reaction from my new iOS 4.2 installation.

  • Error message charging is not supported with this accessory

    I have an iPhone 3GS from Jul 2009. Fully updated. I normally charge it using a USB port on my MacBook Pro so it also syncs at the same time. This week began getting an alert on my phone which said "charging is not supported with this accessory". I resolved initially by unplugging/replugging the cord. In all cases the phone had been charging for some time before the alert appeared. In most cases the phone was sitting on the same surface as the macbook and had not been moved since beginning charge.
    The only support document I can find refers to firewire and does not apply to my device.
    Since starting this week it is happening more frequently and may require being re-connected several times.
    It is still intermittent issue but I depend on my phone.
    Thank you for your assistance

    I just found some on eBay for about 1.99 each with free shipping and ordered about 6 of them from the seller, I think they came from China so it takes a couple weeks. So far I never got a bad cable, but if you do use eBay please check their feedback to make sure they have a history of delivering quality cables and working cables. Always pay using PayPal if possible so you don't lose your money. There are online sites like Meritline and such that have cheaper cables for direct sales with PayPal checkout and free shipping.
    I use the 6' cable in the car, so I don't have figure where to put the iPhone or iPod when plugged into the stereo and it is helpful to have them when trying to charge when the plug is being a dresser or something when I travel.
    I also like the retractable cables ($0.99)
    I also have the Scosche FlipSYNC Keychain cable too, a bit expensive, but you always have a cable with you just in case.
    Message was edited by: cls24

  • After update my iphone 4, I have problem charging my phone. It will always display Charging is not supported with this accessory

    After update my iphone 4, I have problem charging my phone. It will always display charging is not supported with this accessory. What happen to iOS 5, how come it can register my charger?

    I have a 3Gs and I cant charge my iPone with any of my non Apple charges such as my Logitech stereo since I upgraded to IOS5... what did Apple do?
    /M

  • IPhone 3GS - "Charging is not supported with this accessory"

    Hi everyone,
    I'm hoping someone can help me with this. Basically we have a non-Apple docking station at work, and we all take turns to plug in our iPods and iPhones to listen to our music. The moment I plug my iPhone in there, a message pops up saying that "Charging is not supported with this accessory"
    This honestly doesn't bother me at all - the message pops up on everyone's device when they plug it in.
    The thing that really bothers me is that now when charge my iPhone at home, with the official cables, etc., the same message pops up. Most of the time, if I remove the cable and re-insert it, the message doesn't appear and my phone charges normally again.
    This problem only started after I plugged my phone into that docking station at work, and now it just won't stop. I've restarted my phone and everything, but I can't believe that the problem's just not going away. I'm not even using the docking station anymore... No one else at work is experiencing the same problem.
    Is there anything I can do about this, or will that message never stop appearing when I try to charge my iPhone?
    Thanks in advance!

    OK, so just an easy check - reset your phone and see if it makes any difference - hold down the Home and Sleep/Wake buttons at the same time and continue to hold them down until the Silver Apple appears. Then, once the Home screen comes back up, plug 'er in, and see what you get.
    If you get the same message, then you need to take a trip to your nearest Apple store or Authorized Apple Service Provider with the iPhone, cable, and adaptor so they can check it out. Or, you can simply purchase a new adaptor and cable (it sounds like the adaptor itself may have an issue at this point....)
    Cheers and good luck!
    GB

  • IPhone 4 "Charging is not supported with this accessory"

    I am using the IPhone 4 IOS 6.1.3 and receiving the warning "Charging is not supported with this accessory".
    I changed the cords and cleaned the ports with a wire, then compressed air.
    Brought it intro the Genius Bar and still having an issue, Apple thinks it may be a damaged port.
    I refuse to believe that since it will still accept a charge and will data transfer to my laptop.
    Any ideas on fixes?

    Does this message appear when anything is plugged into the dock connector or a specific device?
    If the former, the port is damaged.
    If the later, the device causing the message is the problem.

Maybe you are looking for

  • Powershell Edit GPO deploy Printer

    Hi Guys, I tried to make Powershell script with GUI to add printers to print server. I would like that my super user just write new printer name and IP adresse in textbox and script suppose to add printer to printer server, create new ADGroupe to eac

  • Why does my iPad2 suddenly keep losing connection on facetime?

    Why does my iPad2 suddenly keep losing connection on FaceTime and tries to constantly reconnect?

  • Need a Tcode Similar to CJR2 with some restrictions in the selection scr

    Hello Experts, I need a Tcode which is Similar to CJR2 but with some restrictions in the selection screen. CAN ANYONE THROW A LIGHT HOW TO ACHIVE THIS. Thanks a lot in advance. Regards, Vasanth M

  • Javascript Location illustrator CC

    Hi, How can we change the Javascript (JSX) location in Illustrator CC from:      C:\Program Files\Adobe\Adobe Illustrator CC (64 Bit)\Presets\nl_NL\Scripts to:      J:\Scripts\Library_V1\Adobe_Scripts      J = a local server Thnx Michael

  • How to transfer my files from PBG3 to new PBG4

    I just got my new PBG4 and need to set up. To transfer my files or info from old PBG3, do I need buy a FireWire cable(6-pin)? Where can I buy? Then, the Setup Assistant can do it? This Setup Assistant is easier or better for this procedure than Migra