Iphone 4 Pairing 2010 Honda Civic with hands free link.
I purchased this vehicle several months ago and paired my iphone with the hands free link with no problem. All the sudden last week I started my car and noticed that the hands free did not connect. I haver since tried numerous things, such as deleting the phone from history from the car system and try to pair again with no success.
The iphone picks up the hands free link system. The hands free link gives the pair code (0000). I enter the code, but then a message on the iphone states the code is correct but the pair was unsuccessful. How can I correct this? Thanks.
Remove the phone from the device list in the vehicle. Remove the vehicle from the device list on the phone. Do a reset on the phone, holding the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, turn Bluetooth on for the phone. Then go into the vehicle and follow the manufacturer's instructions for putting the vehicle into pairing mode. See if you can pair the two devices.
On occasion, devices will not always connect automatically. If after the devices pair this happens, just go into the Bluetooth setting on the phone, locate the listing for the car and tap on it. It should connect then. This will prevent the need to try and pair the two devices again.
You can also see if this support document helps you any. http://support.apple.com/kb/TS3581
Similar Messages
-
HT204387 pair iPhone 5s running iOs7 with Hands free link in Acura TL
I cannot get my iPhone 5s running iOs 7.0.4 paired with my 2005 Acura TL blutooth, HFL (hand free link). My old 3G paired with no problem. I have tried to reboot iPhone, changed the name of my phone, tried 000, 1234, 1010 for code, etc. Any help would be appreciated.
Hi Judel762,
If you are having issues pairing your new iPhone to your car's Bluetooth, you may find the following article helpful:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
Regards,
- Brenden -
Ii Phone 5 Not Discoverible Acura Hands Free Link
Has anyone else had issues with Acura's/Honda's Hands Free Link not discovering the iphone 5 therefore, unable to use the Hands free Link. It work great all all of a sudden it doesn't. I have done everything, spoke with Acura, they testing my Hands Free Link System and it's working fine. Any help would be greatly appreciated!
InnaB, this is an issue with iPhone. This is just MY speculation, hope Apple will release a fix soon. You can also leave a feedback here http://www.apple.com/feedback/iphone.html and PLEASE enter specific information of vehicle like Model, year and type of radio or Audio System your vehicle is equipped with when you fill out that feedback. I have encountered similar issues with other makes of cars too as I do a lot of testing of cars.There are some vehicles that work fine and then there are some that exhibit concerns like yours.
On a side note have you tried to RESET NETWORK settings and tried? Also unpair ALL BT sets, re-pair the iPhone to your vehicle and try it. Some instances I have encountered where the IiPhone was STILL paired to a HEADSET, it would NOT release it to work with another BT device. Some car audio systems have what's called an "Auto Pairing" which works awesome with iPhone, where you DONOT have to worry at all, start the vehicle, turn on audio system, iPhone auto pairs to that system. I donot know IF your vehicle is equipped with that design, check in the user manual of that system please. -
I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?
You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
Does my iPhone 4 work with Hands Free Profile (HFP)?
My new car is supposed to send/receive text messages via the new fandangled stereo/navigation unit. The manual says the phone must be compatible with "Hands Free Profile (HFP)" or Message Access Profile (HFP)". Does the iPhone4 use/have this? New car is a 2012 Subaru Impreza with the Nav system.
Thanks.It supports HFP 1.5 (see http://support.apple.com/kb/HT3647).
-
Honda Hands Free link causes phone to reboot
I have my phone paired with my Honda hands free link however when I receive phone calls my phone will reboot. I have set the Bluetooth options to always trust this device and still am having the issue. Any recommendations?
Honda has an entire troubleshooting site for HandsFreeLink. It's available to technicians and the public alike. I wonder if your technician even bothered to look at the HFL site. Many techs seem to be unaware of Honda's own online help.
Go here:
http://handsfreelink.com/
Choose your vehicle and cell carrier. There is very extensive information available.
Despite the site not having "Honda" in its URL, it is operated by American Honda.
You did not say what model or year of Honda you have, otherwise I'd look things up for you. -
How can I findout about the compatibility between the iPhone 6 and certain vehicles, and the hands free connectivity in those vehicles?
I am interested in the iPhone 6 but have several meetings that have to call into for work. Where can I find out about the compatibility with iPhone 6 and if there are issues I need to be aware of for connecting to hands free option in the car?
Please point me to the right direction. The dealership was useless in helping me. I figured Verizon can be more helpful.ShaM1,
I understand the importance of the bluetooth compatibility between your new device and your car. What make and model is your vehicle?
Here is the information that Verizon Wireless has on Bluetooth Car Kit compatibility; http://www.verizonwireless.com/support/how-to-use-bluetooth-car-kit-compatibility/. However, Apple does not have any information listed here. We can assume that the latest and greatest iPhone 6 has the technology to be compatible with most vehicles. If you'd like to discover further information I'd suggest contacting Apple directly; 800-275-2273.
Let us know if you need anything else!
TrevorC_VZW
Follow us on Twitter @VZWSupport -
Bluetooth: Volume Issue (Palm Pixi, Hands Free Link Bluetooth)
Make/Model: Acura TL
Year: 2008
Carkit Model info (Manufacturer, firmware version, etc):
Details of problem: Call volume is so quiet you can't hear anything on bluetooth HFL (Hands Free Link)
webOS version:.4.5
Included in compatibility list:
Yesterday morning the built-in bluetooth on my car was working fine, then at lunch when I tried to use it it was impossible to hear the call. I checked the phone and the volume is turned up all the way, and the bluetooth HFL is working fine with my husband's phone, so the issue has to be with my Palm Pixi. I can hear the HFL commands and prompts without issue at a normal volume level (8-10) but to hear even a whisper of a conversation or even a ringtone I have to turn the volume up to about 40.
I've tried to search on my Pixi to see if there are any settings I can adjust or update, but haven't been able to find anything.
Anyone have suggestions about how to correct/address this issue?
Post relates to: Pixi p120eww (Sprint)You have to go through the entire pairing process or can you just turn off Bluetooth and then turn it back on again, or go into the phone and select the car and they connect? If you are having to go through the pairing process again, it could be a problem with the vehicle. The iPhone uses the latest Bluetooth stack and it may be a problem with pairing with the vehicle system. Try contacting Honda/Acura and see if there are any firmware updates for the systems in the vehicle.
-
When I get in my Honda accord and my iphone 6 links up via bluetooth, then use maps, it always defaults to giving map directions via the hands free link (honda speaker system). Each time I start a map I can click on microphone and tell it to use iphone rather than hands free link. Is there a way that I can set things up so that it always defaults to iphone? Also when I use google maps, I would also like it to use iphone for audio. Can't find out how to change this in google maps.
Also, is google maps more reliable than the iphone maps?Just as a side question:
Have you ever loaded a tracklog containing different tracks belonging to more than 1 month?
This is what a tracklog with tracks from 10/14/2011 to 11/07/2011 looks like here:
Dropdown for the first November 2011 row:
Dropdown for the second November 2011 row:
Not a big problem, but also not nice.
Beat
Message was edited by: b_gossweiler: cosmetics -
Hand-free link in Accura MDX cannot connect to phone after update IOS 7.1.2
After I updated the IOS 7.1.2 on both my iPhone 5s, the hand-free link in my MDX 2005 cannot connect/recognize to both my phones anymore. What should I do? Please HELP!
Apparently there are no supported carriers in Pakistan. So the carrier update was for a non-Pakistani carrier. If it worked in the past your phone was probably hacked to add local carrier support.
-
Bluetooth: 8310 won't complete pairing with hands-free kit in 2006 X-type Jaguar
My new 8310, v4.2.2.181 (Platform 2.5.0.35), recognises the hands-free kit in our 2006 Jaguar X-type ("Jaguar" shows on the Bluetooth paired devices screen), but the pairing won't complete through to connection. Our dealer has confirmed that other phones will. The Jag website confirms full compatibility with the 8310 to v4.2.2.146 (Platform 2.5.0.16), also "Latest Tested Version". I'm asking Jaguar what the latter is. But is there anything simple that I'm getting wrong here? I've read the trouble-shooting pages in the manuals for the 8310 and the car, have tried disabling the encryption, and changed the "trust" option to Yes. No result so far: help!
for DVD:
which DE you use ?
post your
/etc/fstab -
What's the best way to connect latest iphone to 2010 Mini CooperS for hands free
What is the best way to connect the latest iphone to a 2010 mini Cooper S for hands free operation?
Patrick Hindman wrote:
Does anyone have any suggestions of what kind of hardware I should purchase to do this? Basically, I want a jam-up iTunes server that serves everything to each device (sorry, should have worded it this way sooner! . Maybe a MacMini server would do it? Or possibly just a Mac Mini or would Time Capsule do something like this?
i use an old G4 Mac Mini running 10.5 Leopard, and it's on 24/7
it runs in headless mode (ie no monitor) and i remotely administer it using remote desktop (or logmein if i'm out the house).
i have a 1TB WD Mybook hanging off it connected via Firewire and that stores all my itunes content. -
Hands Free Link (HFL) on Acura TL does not work with iPhone 3G
I pair iPhone successfully, and can pick up the incoming calls. However, when I make an outgoing call on iPhone, and tell it to use HFL, the call is not transferred to HFL.
HFL works fine with my Treo 650, including picking the outgoing calls.
Is there a software update or setting for either iPhone or Acura?
Thanks,
InnaInnaB, this is an issue with iPhone. This is just MY speculation, hope Apple will release a fix soon. You can also leave a feedback here http://www.apple.com/feedback/iphone.html and PLEASE enter specific information of vehicle like Model, year and type of radio or Audio System your vehicle is equipped with when you fill out that feedback. I have encountered similar issues with other makes of cars too as I do a lot of testing of cars.There are some vehicles that work fine and then there are some that exhibit concerns like yours.
On a side note have you tried to RESET NETWORK settings and tried? Also unpair ALL BT sets, re-pair the iPhone to your vehicle and try it. Some instances I have encountered where the IiPhone was STILL paired to a HEADSET, it would NOT release it to work with another BT device. Some car audio systems have what's called an "Auto Pairing" which works awesome with iPhone, where you DONOT have to worry at all, start the vehicle, turn on audio system, iPhone auto pairs to that system. I donot know IF your vehicle is equipped with that design, check in the user manual of that system please. -
Well I just got a new iPhone 4 and wish to use my Toyota Prius Hands-Free capabilities with the new phone in my 2006 Prius.
I tried setting up in the car but it says to enter pass key on the phone; which I can't figure out how to do as it gives me a key pad but
the only button is the "Call" button???You must unlock your phone by entering its passcode (if any), then go to Settings/Bluetooth. In the car you must enable Pairing mode (check the manual for the car). When the two see each other you may have to enter a pairing passcode, but this should be displayed in the car. For most hands-free pairing the passcode will be "0000", but you should check the car's manual.
-
I phone compatibility with hands free car systems
I purchased an I phone which replaced a Palm Treo 650 (verizon). It worked perfectly.When I am using my in car hands free system, the I phone Tries to work but the voices break up,especially at he beginning. When I am speaking I phone to I phone it is almost impossible to understand the conversation. I phone to land line is better.
I phone to I phone not thru the handsfree is perfect.There seems to be a compatibility problem. My device is bluetooth.There are several threads on this subject that you can use the search function for... I suggest you make sure to mention what in-car system you are using (car make and model), since this is about the most important piece of information. Also, you might try the forums at edmunds.com that have lots of related threads organized by auto make and model. For me, my Treo 700p worked, but had some issues, with my '07 Toyota/Lexus system. The iPhone works perfectly.
Message was edited by: Chas Hulme
Maybe you are looking for
-
InDesign CS3 Scripting XML Import Multiple Images into same Text Frame
I am having trouble importing multiple images into the same Text Frame using XML import. I imported 5 images into the text frame. However, all 5 images are laying on top of one another. Does anyone know if there is a way to have all images laying out
-
Error sending data to an SCMTM system from an R3 system
Dear Friends I am trying to send an Idoc from R3 system to an SCMTM system. I have imported the idoc, message mapping is preconfigured from SAP and requisite configurations in ID have been completed. I am getting this error in sxmb_moni when I use FT
-
Unix Shell Script to check file Format
Hello I am New to shell scripting.Please help me to write a script for the below condition.Any help is highly appreciated. I will get a text file every month like the one below Sample file Payslip.txt ======== EMPID EMAIL PCTAG# 4946:[email protected
-
Hello, Please can I request that a spell checker be considered for a future release/version of SAP. Many thanks, Kate
-
hi guys, I try to export an Illustrator file as JPG and CMYK and it will always results as and outline text without fill. original file http://www.pixentral.com/show.php?picture=1EQLksieEsVQdt7A2dJGcvWGJYuTo0 exported file http://www.pixentral.com/sh