IPhone 4 - Pioneer Speaker System No Longer Works After Firmware Update

To Whom It May Concern,
I recently updated the firmware on my iPhone 4 from 4.1 to 4.2.1. Unfortunately, as soon as I did that my Pioneer (XW-NAV1K-K) Speaker System no longer works with my iPhone. Are there plans on correcting this in the next firmware?

Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
Your or anyones HELP! is greatly appreciated!

Similar Messages

Airport no longer working after firmware update

Before i get to my question, i think that it is necessary to give a bit of background as to why i have set my network up the way i have.
I recently moved in with my girlfriend and brought my broadband package with me as i would have to pay a fee to cancel my contract within the contract period.
This would be all well and good except that in the new location, the service provider can only supply broadband via an ADSL phone line (provided by a seperate telephone company) furthermore they (Virgin Media - i'm gonna name names) provide a cheap USB only modem - which in turn is only compatible with PPC Macs.
Fine for me, but not so great for my girlfriend who has an Intel Mac Mini and not so great for my new Airport Extreme which of course requires a modem with an ethernet connection.
Bearing in mind that it's just after Christmas and i can't afford to just run out and buy an ethernet modem or change my ISP - i thought that i would try something out.
With the USB modem connected to my old PPC G4 i then connected the ethernet cable (that i had connecting our two Macs allowing them to share the internet connection) - from my G4 to the WAN port on the Airport...
Now i'm a real networking newbie so i was a little suprised when suddenly and effortlessly i had created a wireless network that the Mac Mini and our iPod Touches could see and use. I set up security etc and all was well and good...for two days.
Then Airport received a firmware update and now it doesn't work and resetting the Airport doesn't help.
So now i have to get my hands dirty and like i say, i know jack about networks or the terminology.
With this configuration - and obviously we know that it can work (somehow!)
should i be in bridge mode or sharing a single IP address? and just how am i connecting to the internet. Static IP address/DHCP - PPPoE? I know what these abbreviations stand for but i don't know what they mean.
In the course of 'playing around' with the settings i have seen a message saying that Airport has an invalid I.P. address - why is it invalid and is that only because of something that i have changed or is that the route of the problem?
All the machines can see each other and the only clue i can provide is this log extract.
Jan 19 01:05:31 Severity:5 Initialized (firmware 7.2.1).
Jan 19 01:05:34 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jan 19 01:05:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:34 Severity:5 Rotated TKIP group key.
Jan 19 01:05:42 Severity:5 (WAN) link state is Up.
Jan 19 01:05:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:54 Severity:5 Associated with station 00:1d:4f:e3:87:17
Jan 19 01:05:54 Severity:5 Installed unicast CCMP key for supplicant 00:1d:4f:e3:87:17
Jan 19 01:06:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49186.
Jan 19 01:06:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:08 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49187.
Jan 19 01:07:09 Severity:5 Configuration updated.
Jan 19 01:07:09 Severity:5 unloading current configuration.
Jan 19 01:07:17 Severity:5 Deauthenticating with station
...and so on.
I'm hoping that some networking guru is reading this and can provide me with a few pointers.
Can anyone help? I've been struggling with this for days now.
Thanks in advance.
Steve.

Your setup is convoluted, but it should work. A few comments:
1. The base station should be configured to get an IP address using DHCP, which it will get from your PPC which (with internet connection sharing turned on) is now acting as a DHCP server.
2. The base station should be configured in bridge mode, since your PPC (with intenet connection sharing turned on) is now acting as a router.
3. I suggest you should turn off the network firewall on the PPC as long as your are running this sort of setup. Not ideal, but it will prevent all sorts of connectivity problems between the internet and everything downstream of your PPC's ethernet port.

Cisco VPN no longer working after firmware update

I have been using the Cisco VPN network connection to access work; after the recent update, both my Macs stopped working -- no changes have been made.
Is this a known bug? I looked at the settings, verified everything with no luck.
Thanks.

See http://discussions.apple.com/thread.jspa?messageID=12800407&tstart=0. If you want to report this issue to Apple's engineering, send a bug report or an enhancement request via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

Pioneer DVR 106D does not work after firmware update

I tried to update the firmware of my iMac with DVRFlashX. I failed. No Superdrive is showing up in the system information. DVD can't be removed even with the firmware eject function. No Pioneer drive is found. How do I get the right firmware for the Superdive via Internet to make it work again?

Hallo und Willkommen zu den Apple Diskussionen.
Thanks for taking the time to let us know what happened. I assume this Firmware wasn't supplied by Apple... What updates does it achieve?
many thanks
mrtotes

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

Headphones no longer work after ios8 update to Iphone 5

My plug in head phones no longer work after updating to IOS8. I thought it was the head phones and bought new ones - they don't work either. I updated my iPad and both head phones work. Phone is IPhone 5 - not due for an upgrade until December. Any suggestions?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

N95 Map stop working after firmware update

I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
Need help please.

have u tried reinstalling the maps application?
u can get the latest maps application update from http://www.nokia.com/maps
download the application associated with ur n95 and install it using the pc suite application
if my post helped u out, please click the Star next to it to add some KUDOS to my name

IPad/iPhone file browser (iPhone Explorer) no longer working after iTunes update

iTunes freezes up on me a lot when I connect my iPad, so I prefer to add files to apps using a file browser like iPhone Explorer. However, after this most recent iTunes/Quicktime update, this and other programs like it don't work.
My computer is running Windows XP (yeah, I know it's old, but I'm not made of money!). I have an iPad 2 with the most recent iOS version installed.
Here's the error message iPhone Explorer gives me:
"iPhone Explorer is unable to load the app directories because the version of CoreFoundation.dll installed on your system doesn't work properly. This sucky DLL likely got on to your computer because of a recent update in the Safari web browser. Because this sucky DLL is shared between many other Apple programs, reverting back to the non-sucky version is more complicated than just uninstalling and reinstalling a couple programs. We recommend waiting a couple months for the next Safari update and hopefully Apple will have this stuff fixed then."
I don't have Safari installed on my computer. Just iTunes (and Quicktime).
As a result, you can't browse the app directories, so you can't add any files to apps. I tried uninstalling iTunes and replacing it with an older version, but it wouldn't open because it said the library file was created by a "newer version." I'm also having some trouble even getting iTunes to show the files in my apps (under iPad -> Apps -> scroll to bottom of the screen), but that might just be a symptom of my old iTunes-freezing problems.
I'm kind of stuck. Anyone else experience this problem or have any suggestions? Thanks!!

That's XP SP3 I hope? iPhone Explorer support is shown at the bottom of the page you linked above or at [email protected] and it's them you should be asking really.
You should be keeping iTunes and the iPad software always up to date for security reasons. If that breaks external software then they are the ones to ask.
If you are having problems with the iPad then try resetting it by clicking the Home and Sleep buttons simultaneously for about 10 seconds until the Apple logo appears. You wont lose anything.
If iTunes is acting up then try asking on that forum: https://discussions.apple.com/community/itunes/itunes_for_windows

My left speaker is no longer working after update

I just got my iphone5s, the speakers both worked before I updated the phone now the left speaker does not work. How do I fix this?

Your iPhone only has one speaker. It's to the right of the lightning port. The grill on the left covers a microphone.

Standard PCI to PCI bridge no longer working after BIOS update

Hey everyone,
Before I get into the details of what is probably the most frustrating computer problem I have ever faced I would first like to say hello because this is my first post and I give you my system specs.
Windows 7 ultimate x64
GA-M61PME-S2P (rev 1.0) MOBO
2x 120GB Mushkin SSD @3.5gbps Raid 0
AMD Phenom II x4 @2.2 GHZ (Old processor that I replaced)
AMD Phenom II 1090T x6 @ 3.2GHZ (New processor that replaced the Phenom x4)
MSI Cyclone GTX 550 TI OC (Nvidia)
8 Gigs 800mhz DDR2 RAM (Computer Bay)
I have had a GA-M61PME-S2P (rev 1.0) board for several years now and have never had any problems. I recently bought a brand new AMD phenom II x6 1090T processor because it was listed as being supported by my board. The BIOS version that I had installed before purchasing this processor (version F5) was unable to recognize my new processor and boot so I had to update to the latest version (version F7b). After flashing my BIOS with the new version I was able to boot and my computer recognized my processor with the correct name and clock speeds. Unfortunately it now no longer recognizes one of my standard PCI to PCI bridges. Of the two standard PCI to PCI bridges listed in device manager one of them has a yellow exclamation point and reads "error code 35 firmware does not contain enough info to configure this device". I have tried everything I can think of but just cant seem to get my processor and graphics card to work under the same BIOS version. I will now list every step I have taken;
1.) I have re-flashed several times between versions F5 and F7b but always get the same results
2.) I have used Driver cleaner in safe mode to wipe all drivers and then double checked programs and features to make sure nothing was still installed.
3.) I have installed all drivers for the board from Gigabytes website, although when I try to install the VGA driver i get an error saying that no device could be found that supports the driver.
4.) I once again wiped everything in safe mode and then found the latest chipset drivers for nvidia Nforce from NVidia's site but got the same results.
5.) I tried downloading the F7b BIOS from some random website just in case the file from Gigabyte was somehow broken but this did not change anything. (I know that's generally a bad idea but I am desperate)
6.) I uninstalled the problem standard PCI to PCI bridge in device manager and restarted my computer but got the same results.
7.) I tried installing my graphics card drivers from MSI but got an error saying that no supported hardware could be found.
8.) I tried installing a number of different versions of the Nvidia graphics card drivers for my series but kept getting that same error message
9.) I downloaded the Graphics card detector program that NVidia provides on their site but it told me that it could not detect my graphics card.
10.) I tried Flashing my BIOS to the F6 version for the rev 1.3 board but this turned out to be a huge mistake because my computer would no longer post after this and I had to use a FAT32 flash drive and the q-flash utility to bring it back to life.
11.) I checked over and over and over again that my BIOS settings were right and nothing was setup to only use on-board graphics.
12.) I tried downloading a driver that was supposedly for the PCI to PCI bridge but im fairly sure this was just a trojan because the install did not complete and I found tons of fun plugins installed afterwards (I reformatted shortly after this).
13.) I made sure that my new processor was plugged in and that my BIOS was version F7b and then completely wiped my hard drive and re-installed windows 7 ultimate x64 but got the same results.
14.) I made a bootable DOS flash drive and tried updating my Graphics card BIOS but found that I already have the latest version.
What I don't understand is that my graphics card works perfectly with BIOS version F5 and my processor works perfectly with BIOS version F7b but under no circumstance do they both work at the same time. It may be worth noting that with version F7b installed I am still able to use my graphics card ( my Monitor is plugged into it via DVI) It just gives me the error under device manager and I can not install any drivers.
If anyone out there can help me I will be insanely grateful and will refer to you from then on as the master of all things MSI. I'm at my wits end, If you need any further info just ask and I will provide.

Ah ok I was afraid you were going to say that. I will take this to gigabyte then but just so I know, This PCI to PCI bridge problem couldn't have anything to do with my MSI graphics card BIOS somehow not being compatible with the Gigabyte BIOS?
-Thank you!

HP OfficeJet 6500A fax no longer works after Mavericks update

After updating to Mavericks and installing the HP software drivers, the fax component no longer works. I installed the fax part of the update, and when I print to fax, instead of triggering the machine to dial a number like it did in Mountain Lion, the printer prints out garbage text. There's no relevant support page on HP's website about this issue. Anyone got their HP fax to work via print to fax from their Mac?

Hello Peter,
It sounds like you are not able to fax from your HP OfficeJet 6500A. I recommend the following steps for the issue you described:
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Thank you for using Apple Support Communities.
Best,
Sheila M.

Bluetooth headset no longer work after latest update

I use a Plantronics Voyager Pro bluetooth headset for Skype calling and Ventrillo on my Macbook Pro. Since after the latest update, it no longer works. Both input and output doesn't work and the applications hang for about 30 seconds. I've tried re-pairing the device to no avail. Both applications work if I switch them to the built-in microphone.
I also tried doing the same thing with a Plantronics 245 and I get the same issue.
Both headset work with my phone.

FIXED!!!!
Steps to UNF*ing your Mac.
1) Install an app called Pacifist
2) Download the individual installer for the Magic Touch Update here: http://support.apple.com/kb/DL1066 DO NOT INSTALL THIS
3) Load your OSX Install DVD
4) Open the MagicTrackpadMultiTouchUpd1.0.dmg in Pacifist
5) Open your OSX Installer DVD in Pacifist
6) Look at the MagicTrackpadMultiTouchUpd1.0.dmg package in Pacifist to see exactly what it installed and where.
7) Find these SAME EXACT FILES on the OSX Installer and reinstall them as root (e.g. using your admin password when asked)
8) Repair permissions (Do NOT skip this)
9) Reboot
10) MOST IMPORTANT: Never install the update again!!
Your bluetooth headset will work in skype after this. You will replace EVERY FILE THE MagicTrackpadMultiTouchUpd1.0.dmg package installed with one from the DVD. If you can not find it, the search bar in Pacifist works wonders.
You will get an error if you try to reinstall admin.framework about not having permission to install. This will be the ONLY file you will not reinstall.
Yes, you have more or less, in a very complicated fashion uninstalled the update (software update shows the Magic Touch update as needed afterwards).
Find me on Skype, where I will be able to walk you through it from my Plantronics Voyager Pro bluetooth headset at james.t.bolin
In case you developers want to know, I'll give you my play by play. After the installation of the update, it borked the bluetooth causing Skype to freeze. Reinstalling all the original kexts from the installer disk fixed the skype freezing issue, but there was still no audio. In fact, after reinstalling everything in the System>Library folder still left me with no audio, but it would not freeze or cause kernel panics at this point.
This is where I got the magic. I started replacing stuff in the usr directory. Upon replacing the usr>libexec>cups>backend>bluetooth; usr>libexec>hidd; usr>sbin>blued; and the blue.8 and hidd.8 files, I got audio back and the stars aligned in perfect harmony. I suspect apple needs to retool the kexts and rewrite the root level profiles.

Airport no longer working after latest updates

After my latest software updates, the Airport on my 13" Macbook is no longer working.
I can connect to networks and can get full signal from the wireless router in my home, yet none of my browsers can actually connect to the internet.
I've tried multiple wireless connections and none function properly. Suggestions?
I'm currently connected directly to my NETGEAR router via ethernet

Experiencing similar issue.
Wired works forever without any issue. Wireless (airport) works for a while (random 2-60 minutes, could be related to data volume) then gets stuck. At that point getting back to wire (without reseting the airport AP) solves it. Also, cycling the airport client (disable/enable) gets it to work for a few minutes... until it gets stuck again. Other devices (iPhone, iPod touch) connected to the same airport AP do get access while the macbook is stuck.
Thought this could be 11n related since the macbook is the only device running 11n. However, while wireless http/web access is stuck on the macbook one can still perform ftp connections (bit no file transfer as such), pings and/or access the time machine configuration (some of this seems to be randomly working) from that macbook. Not sure whether 11n handles short bursts and large bursts differently?
Finally, the behaviour is the same whether using Safari or Firefox and relaunching eitehr app does not solve it.
Clueless for now.

IPhone 4 - Pioneer Speaker System No Longer Works After Firmware Update

Similar Messages

Maybe you are looking for