IPhone 4 planning to be update to iOS 7.0.6
my iphone 4 is currently running iOS 6.1.3 ,which runs smoothly on my daily needs.My concerns are ,will iOS 7.0.6 would slow my iPhone 4.?,since i'm not a fan into gaming apps.,im more likely into,browsing & video watching only & of corse daily sms & emailing/social net surfing too!.....anyone here,who experienced any downside experiences in upgrading to the latest 7.0.6 on their iPhone 4..Your suggestion would be highly appreciated.. ..(which i dont have that much money to upgrade my unit)..Hoping for some hints wether i will upgarde or just keep my iOS 6.1.3
I was researching online and I think it may be a defective battery but I am not sure.
Similar Messages
-
I can't find the personal hotspot on my iPhone 4 since I updated to iOS 5?, I can't find the personal hotspot on my iPhone 4 since I updated to iOS 5?
Do you pay for a tethering plan? This is a feature that has to be activated by your carrier and is generally NOT free.
-
TS1567 I cannot activate my iphone 3gs after I updated to ios 6.
I cannot activate my iphone 3gs after i updated to ios 6.0.1 and all it shows when i start the phone is connect to itunes. I have tried
several time to get it back as normal but its the same all the time. Can someone please help...
ThanksThe typical cause is that the device has been hacked or jailbroken.
-
IPhone 5s won't update to iOS 8.0.2
My iPhone 5s won't update to iOS 8.0.2. I had been using beta versions of iOS 8 but even though there is a '1' in the Software Update box, it tells me my software is up to date (iOS 8).
However, I also get messages telling me my current iOS will expire in x days. I now have dozens of apps waiting to update, telling me I have to upgrade to iOS 8.0.1 or later.
I've tried to manually install iOS 8.0.2 but I get a message saying the firmware isn't compatible.
Any ideas?Ask in the developer forum; someone there should be able to help you.
~Lyssa -
I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?
The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
10.8 Mountain Lion is a download from the App Store, the price is $19.99.
Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?
I have the same problem. After updating to 6.1.2 my iPad 3,2 will not find Verizon network. It just says "Searching..." for ever. Any thoughts?
-
Hi there. I have the iphone 4. Since updating to ios 6, the sent text message sound no longer "plays"! Is there any way of turning it back on? Thanks.
Hi there. I have the iphone 4. Since updating to ios 6, the sent text message sound no longer "plays"! Is there any way of turning it back on? Thanks.
-
I have the iphone 4 and just updated to iOS 6 and all my text messages are gone. Can I get them back?
Group messaging simply puts all replies in one conversation in Messages. It doesn't prevent the behavior you experienced.
My suggestion which would be much easier in my opinion, is rather than do a text, send out an email and use bcc: , which will keep the audience hidden from each recipient.
Otherwise, if you're determinted to do only texts, the only way is to send your message to one person at a time. You can of course copy/paste your msg each time which might be helpful. -
My iphone 4s will not update to ios 7. I'm trying to update this through my imac because the iphone will also not connect to my home wifi. I've tried several different things but nothing is working. I deleted enough pics and apps so there is enough storage. When i plug it in, it starts to bring all my photos to the imac. I cancel this because i don't want it. It then says extracting software, backing up iphone, then i get the error message. Do I need the iphone 5?
I just tried again, no code comes up on the imac. Just says cannot back up this device with my "initials" because of an error. It's weird because my iphone has been connected to othert wifi sources in the past. I've looked through these forums and have tried multiple things like resetting the phone, resetting network, shutting off modem and router, nothing works. I have an apple airport extreme router too. Any suggestions are greatly appreciated.
-
My iPhone 4 fail to update to iOS 5 and now it can't restor the firmware I am geting and error it says The iPhone "iphone" could not be restored. An unknown error occurre (-1) . Plese help
My iPhone 3GS is getting the same error. I've called Apple a bunch of times, and they won't get back to me. I'm searching through discussions to figure out a solution.
-
my iphone 6 plus after updating to IOS 8.2 seems to have a problem with the touch id witch doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' . I have multiple fingerprints and none of them appear to work.
Hi Giannis,
If you are having an issue with Touch ID not functioning as expected, I would suggest that you troubleshoot using the steps in this article -
Use Touch ID on iPhone and iPad - Apple Support
Start with the section titled Clean the Touch ID sensor and then Get help with Touch ID.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
I have a iphone 5 and just updated to ios 8 now i have extended lte where it use to say verizon lte
i have a iphone 5 and just updated to ios 8 now i have extended lte where it use to say verizon lte
This is being discussed in more detail, but without a solution, in another thread: https://community.verizonwireless.com/thread/840295?tstart=0
I am having the same problem with my new iPhone 5s since I installed the current software 8.1.2 yesterday after activating the phone at a Verizon store in Tucson, AZ. My zip code is 84745.
So far I have no battery problems, but that's probably because I have cellular off except when I need it. I am usually on WiFi at home/work as my old 4s was one of the phones that, after an earlier software upgrade, chewed data up for no reason. -
My iphone 5c crashed after updating to IOS 8.02 and now i don't have anything from the last 3 months. What do I do?
Don't worry about that. iPhone stuck in recovery mode always happens when you update the iOS on your iPhone. There are two ways to solve it.
First is is to put your iPhone in DFU mode.
Step 1. Turn off iPhone
Step 2. Hold down the Power and Home button.
Step 3. When you see the Apple logo, release the power button but continue holding the Home button down.
Step 4. Open iTunes and wait for it to tell you that it’s in restore mode.
If DFU mode can't solve the problem, I'm afraid the only solution is to try some 3rd party software, like iPhone data recovery or something like that. You may simply try the tutorial here: How to Fix iPhone that is Stuck in Recovery Mode. -
My iPhone 3gs got an update today ios 6.1.6 but when i press install update my phone shutdown and shows connect to itunes display, after i connect to itunes it shows unknown erro (306).....whats is happening and what should i do ?
Take a look at this post: https://discussions.apple.com/thread/5036467?tstart=0
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences(PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, seeiTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
For more information on other security software, see iTunes: Troubleshooting security software issues. -
My iphone 4s won't update to ios 6! please help!
My iphone 4s won't update to ios 6! I tried by my iphone it takes so long updating then it ends saying error!! I tried by using iTunes too, when it's done and installing it says error too!! this got me crazy!! any solution ? please help!
I got instructions to connect my iPhone4 to iTunes. Each time I was prompted to restore the phone, I ended up getting an error message that the iPhone could not be restored. I checked that I had the latest version of iTunes-I did. I tried two more times and got the same error message. I disconnected the usb/phone, closed iTunes, and restarted the computer. This time the restore worked and iOS6 loaded. Unfortunately, the last backup to iCloud that I was told I had was in June. Don't know why this happened as it should have backed up every day. Now I am working through restoring my settings and apps from the last three months. Thankfully, I didn't 'upgrade' my iPad, so I have a template off of which to work. I hope this helps.
-
I have an iPhone 3GS and have updated to IOS 6.1. Before with emails there was a user bar at the bottom which allowed you to move emails to folders, print etc, but it now seems to be removed. Can you help ?
Close out of the mail app, double click the home button and completely close out of the mail app.
Then do a reset, hold down the home/sleep button together until you see the apple logo and then release then wait for the phone to boot back up.
then check your mail again.
Maybe you are looking for
-
Changing Header data in the part appraisal document
I have implemented a BADI using the definition HRHAP00_ACC_HEADER. The next step is to ensure that at Category level the Changes to Part Appraisal enhancements is selected on the Enhancements tab page. However, the enhancement is not displayed in the
-
How to freeze the number of rows in af:inputtext
Hi all - i have requirement like user should enter only 13 lines after that application should not allow the any characters. am using af:inputtext 13 rows by default it is showing 13 rows , if user trying to enter more than 13 lines it was allowing.
-
How should the all java technology be refered to, say in promotional writings and so: Java or JAVA?
-
Hi, I'm having a problem using the formula node. The output variable is always 1, but I notice that if the code was: if(N != 1) L = 1; else L = 0; The program work ok. Thanks, Sílvia Attachments: 1.png 5 KB 1.png 5 KB
-
I have a 2009 8-core MacPro with 16gb of RAM. QuickCluster started to disappear about three months ago. Apple support suggested that I log in as a new user and that worked for a while but the QuickCluster disappeared again. I decided to create a new