Iphone 4 problems after 7.0.2 update--Especially with keyboard entries

I am having serious iphone 4 problems after installing the 7.0.2 update.  Mostly it is with use of the keyboard.  Each key stroke takes about 8 seconds to show. It is truly disabling.  Apparently many others have had various problems.  The one thing the Apple Tech would tell me was that 7.0.2 cannot be uninstalled.  I have restarted & reset. Settings shows I have more that 20 free GB of space, though I don't know if that's important.
Sure would appreciate help!  Thank you!

settings - general - reset - reset network settings.
also turn off automatic app updated...

Similar Messages

  • Wifi not available problem in iphone 4s after 7.1.2 update.how can i fix it?

    wifi not available problem in iphone 4s after 7.1.2 update.how can i fix it? please help me with this.

    Hi harsh282828,
    Welcome to the Apple Support Communities!
    If you experiencing issues with Wi-Fi being grayed out or dim on your iPhone 4s I suggest the troubleshooting steps provided in the attached article.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/TS1559
    Have a great day,
    Joe

  • IHome no longer works with iPhone 4s after iOS 6.1 update.

    My iHome no longer works with iPhone 4s after iOS 6.1 update.  Prompts message 'This accessory is not supported by iPhone'.  Has anyone come accross this and is there a fix?

    Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

  • My iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode now.usb to itunes.keeps saying!itunes doesn't recognise phone ,after update done now error.i recall doing a firmware update for the old 5.0 update.happened again.i recall

    my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?

    UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )

  • Searching problem after 10.5.6 Update

    Hello everyone, we are having a problem with searching shares mounted on clients from a server.
    Prior to 10.5.6 we could search an entire share as well as folders in the share. After 10.5.6 we can't search the share and we can only search folders in the share.
    The server is currently running 10.4.11.
    I guess what I'm wondering is... are there people with server 10.5 that are also seeing this problem or would upgrading the server fix this search issue?
    Thanks
    Mike

    Searching problem after 10.5.6 Update
    Posted on: 8-jan-2009 18:32, by user: mike allen2 -- Relevance: 100% -- Show all results within this thread
    Hello everyone, we are having a problem with searching shares mounted on clients from a server.
    Prior to 10.5.6 we could search an entire share as well as folders in the share. After 10.5.6 we can't search the share and we can only search folders in the share.
    10.5 that are also seeing this problem or would upgrading the server fix this search issue
    Re: 10.5.6 disables spotlight from searching shared volumes
    Posted on: 18-dec-2008 15:49, by user: jshock -- Relevance: 89% -- Show all results within this thread
    on the other machines that didn't update to 10.5.6. They are able to search all shares. My 10.5.6 machine can only search localhost and Jukebox ...I ran mdutil on the 10.5.6 machine, here are the results:
    $ mdutil -s /Volumes/*
    Indexing disabled.
    /Volumes/Jukebox:
    Server search enabled.
    Re: 10.5.6 Update-DOES NOT SEARCH ANYMORE
    Posted on: 9-jan-2009 20:43, by user: Difhockey_68 -- Relevance: 89% -- Show all results within this thread
    Same problem here, upgraded to 10.5.6 and cannot search our apple server running tiger. Windows shares on 2003 server works fine. Will an upgrade of our Apple server to Leopard solve this issue? Is there an easy way to "uninstall" 10.5.6 without reinstalling the computer
    Since upgrading to 10.5.6 I can't search my network servers
    Posted on: 14-jan-2009 22:24, by user: gridout1959 -- Relevance: 84% -- Show all results within this thread
    Hi all...
    I recently installed the 10.5.6 OS upgrade and I've encountered a problem. I can no longer search my network attached servers - there is no search activity of any kind when I type in search terms. My local search works fine...I just can't search anything on my network ... windows servers. Is there a compatibilty issue between OS X 10.5.6 and Extreme Z-IP? Any helpful tips
    Updated to 10.5.6, no longer able to search through networked shares
    Posted on: 30-dec-2008 16:46, by user: Sigops -- Relevance: 84% -- Show all results within this thread
    One of our users was able to search through our network shares(extreemeZ-ip) just fine yesterday morning, mid morning he updated to 10.5.6 and is no longer able to use finder to perform searches on those shares
    Mac OS 10.5.6 clients can no longer search Mac OS 10.4.11 share points
    Posted on: 8-jan-2009 18:52, by user: rayvid -- Relevance: 71% -- Show all results within this thread
    After upgrading our workstations from Mac OS 10.5.5 to 10.5.6, we no longer receive Finder search results from our file server that runs Mac OS X Server v.10.4.11.
    Are there any other solutions available other than rolling the workstations back to 10.5.5 or upgrading the file server to 10.5.6

  • Album covers missing or mixed up on iPhone/iPad after 4.3.5 update. Only purchased songs affected. What can I do to solve this issue?

    Album covers missing or mixed up on iPhone/iPad after 4.3.5 update. Only purchased songs affected. What can I do to solve this issue?

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

  • My iphone 5 after the 7.1 updates it freezes the screen

    my iphone 5 after the 7.1 updates it freezes the screen

    Restore iPhone with iTunes on computer. Restore is more thorough than Update.

  • 3 Problems after jb 4.3 update

    stockmail exchange active sync shows only headers - no mail content
    bluetoth connect to my HTC One S didn´t work
    screen flickers when using virt. keyboard
    since everything worked well with 4.2.2 and there was no help from sony i decided to do a rollback
    !* same problems with 10.41.B.0.109 (last working version for me is 10.3.1.C.0.136 aka 4.2.2)

    hi.
    I contacted Sony about the Bluetooth / Wireless problem after the 4.3 update, eventually all I got back was that they're aware of the problems (Bluetooth) and are working on it for the next update. How long this will take is anyones guess.
    I find it incredible that they rolled out the 4.3 update because it has so many bugs, at least give us an easy way to roll-back to 4.2.2 ...... that actually worked!

  • HT4061 hello im fation mashi im from albania i have a iphone 3 and i want to update it with ios 4.3.3 but i have fear because maybe can block the apple if i update it can you please help me ?

    hello im fation mashi im from albania i have a iphone 3 and i want to update it with ios 4.3.3 but i have fear because maybe can block the apple if i update it can you please help me ?

    Since an iPhone 3G cannot be updated past iOS 4.2.1...the end of the line for that model iPhone...you can't do what you want, so there's nothing to be fearful of.

  • Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

    great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

    The Yosemite upgrade very often damages existing Photoshop installations.  Thank Apple for that.
    You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
    But first, give us details about your setup:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • HT1937 Can i unlocked my iphone 4 after finishing my 2 year contract with Globe, Philippines?

    Can i unlocked my iphone 4 after finishing my 2 year contract with Globe,Philippines?

    You would have to ask Globe.
    ONLY they can unlock your iphone.

  • SMS problem after 3.1.2 update

    Hi,
    I am not receiving any text messages after 3.1.2 update, and my phone has become too slow. Can one help please.
    Thank you

    Hello Carolyn,
    Thank you for the warm welcome. As for my problem I did not want to be more specific but here are the gory details : I have 2 iphones. A 3GS with the 3.1.2 software and a regular 3G with the 3.0 software.
    Whenever I plug the 3G, it appears in the 'My Computer' screen. I have access to the camera roll and can transfer my pictures to the computer folder I use for later iTunes transfer, using the Photos tab.
    Now when I plug the 3GS, nothing happens. I checked the autoplay features based on the webpage you sent, and it did not solve the problem. Both phones actually have the same settings, and only the regular 3G works. I am now thinking about trying backup restore and/or factory defaults restore, to see if it fixes the problem.
    What happens to the camera roll in these situations ? Is it included in the backup ? Otherwise I will have to find a way to get them :-/

  • Syncing and music problem after iOS 4.3 update

    Hi there
    I updated to iOS 4.3 and found that my phone would no longer sync to my PC. After doing some research and trying lots of things (e.g. removing and reinstalling iTunes, de and reauthorising computer, forcing iphone to restart) I was having no luck so I did a restore. This didn't work either and just hung for hours, so had no choice but to stop it and then my partner managed to get my iPhone back to life on his Mac.
    My iTunes then recognised it as new and I was able to start rebuilding my library. However, when I sync music to my iPhone now, it won't play - it just flashes up for a second and then crashes out. Only happens on my music - podcasts play fine. Haven't tried video yet. It also flashes up the album artwork but it is all distorted (cut in half with the bottom half at the top and vice versa...weird).
    I tried downloading a song on my iPhone which played fine, until I then synced it with the computer and it got the same error as the others.
    Any ideas?! I'm planning to uninstall iTunes again tonight (being sure to completely remove any trace) and erase all data and settings from the iPhone so I can start completely afresh. It's the only solution I can think of.
    Thanks
    Alan

    I have discovered this is a problem with Windows 7 Updates (probably Service Pack 1) for me - after I installed the updates all my music corrupted again and iTunes started freezing and not backing up. Lo and behold, after formatting my computer again and not installing ANY Windows Updates, the problem was fixed and I've been able to add all my music back.
    Now I'm not sure what to do - I would like to get Windows updated, but I know it's going to break my phone. Am tempted to try a different iPod manager software to see if that helps.
    Where do I get the iTunes patch? (sorry if it's really obvious)

  • Voice over wont turn off on iphone 4s after ios 8. Update

    Voice over somehow got turned on after the ios 8 update and when i go to double tap and turn it off it wont turn off it just turns right back on

    Hi,
    Just share with you guys, i having the same issue on iPhone 5. Using the iTunes to turn off the VoiceOver had fixed the issue for me.
    Hope this helps.
    iTunes 11 for Windows: Accessibility features for iPod, iPhone, and iPad
    Cheers,
    Wayne

  • Another major problem after 10.4.8 update

    Hi everyone,
    I've never had any major problem with any Mac OS update yet until I had the crazy idea to install the 10.4.8 update last week. I wish I would have never done this. This is also the first time I wish I had Windows since I can't remember such a big screw up with any Windows update I've seen.
    But back to the problem, after the installation on my old 12" Powerbook (1.33GHz with an additional 1GB of RAM) the system got really slow. The harddisk was accessed all the time, so after reading some forums people said that Spotlight would run a re-index of the database which made sense to me. So I just let it run over night and the next day the permanent HDD access was gone, but whenever I tried to access a folder it took ages (HDD access again...). So I decided to reboot which took about 20 minutes until the desktop fully showed up and was useable. Again, I had HDD access all the time. After two hours or so it stopped again, but as soon as I clicked on something, for example a folder, it started again. At that point the Powerbook was simply not useable anymore because I couldn't even start a program.
    So I start browsing through several forums and many people suggested to re-install the 10.4.8 combo update again. That's what I tried, after a while I could only hear the HDD access running and running. The installer said 29 minutes left and progress bar didn't move any further. I had it running for over a hour like that. I couldn't abort it, I could start no other software, nothing. It still showed 29 minutes and the HDD was accessed all the time.
    So I restarted the Powerbook since this obviously wasn't going anywhere. Apple logo came up, the little gear spinning thing as well and of course I could hear the HDD being accessed. After two hours of doing this I aborted and decided to boot into safe mode to install the combo update. Again, same situation. HDD running like crazy and Apple logo, but no login screen coming up.
    So I decided to boot from the Install disk and have the disc utility check the HDD... but of course after selecting the language and clicking continue at the screen when the HDD first shows up it starts to access the HDD... I can't select the HDD, I can't even get to the DU, nothing. It's been running like that for hours now. It seems like whenever the HDD is involved in something the accessing starts and just keeps running without any result. The HDD is getting very hot already.
    I've never run into such a problem before, so I'm kinda clueless what to do next. I don't mind to reinstall, but I have some files on that HDD that I need (some notes in text files, some emails and so on).
    So at this point I can't boot into OS X to access the HDD and I can't use the installer disk to access DU or even reinstall if I wanted to. I don't think the HDD is broken, this only happened after the 10.4.8 update. It just seems that every HDD access takes hours and hours longer than it should.
    What options do I have to get my data from the disk? I'll try to install OS X to a new external drive tomorrow (need one with firewire first). If that doesn't help I thought about pulling out the HDD from the Powerbook and hook it up to my MacMini or an iMac.
    If anyone has any other suggestion or solved a similar problem before, please let me know.
    Best,
    Stephan

    See my FAQ:
    http://www.macmaps.com/WIFI1048.html

Maybe you are looking for