IPhone 4 problems? I'm having a ton of problems with my IPhone. Help?

I'm having a ton of problems with my iPhone 4 running iOS 6.1.3. Yesterday, I accidentally added a keyboard shortcut that was extremely long and it screwed up my iPhone. For one, the keyboard section of settings would take forever to open, and when it did open and I tried to delete the shortcut, my phone would restart and when I got back, the shortcut was still there. So I reset my phone. 7 times. And it still didn't work. I finally ended up using find my iPhone to erase it and then it worked. The shortcuts were gone and my phone stopped randomly restarting every 5 minutes. But when I got home, I plugged it into iTunes to get all my music an photos back on. I set it up as a new phone. After it was done syncing, I changed the name to the name of what it was before I reset it for the first time. Then, all of the sudden, it started crashing again. Sure enough, the shortcuts were there again. How do I get my music and photos back on my phone without the keyboard shortcuts being added back on? BTW, my songs are all off of CDs so I can't just re download them from the iTunes Store.

It sounds like you restored it with your backup because the shorcuts were back on there. Restore again, as new without your backup. They sync your media back on.

Similar Messages

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

I am having a problem with ICLOUD. Help!

I am having a problem with my icloud. So here is the story. I had iphone 4. My contacts were backed. Someone stole my iphone. I got a new iphone 4s. My contacts did not sync from my previous iphone 4. so someone told me to restore to iphone 4 backup. I did. And wow! i got all my contacts back. I want all my contacts to be saved. And i don't want to lose them, it took me a while to build this list properly. With email and number and address.
Here is what i tried so far, i backed up from itunes to computer, then backup to icloud, then I did from my phone, i turned the contact switch on also, and the swtich on to back up to icloud. When I go to icloud.com. it's not there. If anyone can help me with this issue I would appreciate it. because i have a lot of contacts, and I need to save them in a way, I won't ever lose them.

You would need to backup into icloud again also if you have enough room to backup. If not purchase more icloud backup or backup to itunes. Sync your contacts back to your email where they will always be.

Having Problem with Spry Menu - Help appreciated

Hello there
I am currently developing my website but I am having terrible problems with the spry menu. I have tried lots of things but not yet resolved the issue. I will try to give as much info as possible. My website is www.huntfilms.ie
When I am in dreamweaver the site looks fine and when I preview in browser also looks fine but when I have uploaded to server there is the problem as you can see.
I uploaded all the files that are required I think . I have attached a screen grab of my server view below. : I have six spry files : js,css and four giff files : I have included the code below. I would apprecaite help as been at this for best part of day with no luck ; going mad here
thanks
Barry
<script src="file:///Macintosh HD/Users/barryhunt/Desktop/huntfilms1/SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="file:///Macintosh HD/Users/barryhunt/Desktop/huntfilms1/SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body class="oneColElsCtrHdr">
<div id="container">
<div id="header">
    <h1>Hunt Films</h1>
</div>
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="file:///Macintosh HD/Users/barryhunt/Desktop/huntfilms1/home.html">home</a>    </li>
    <li><a href="file:///Macintosh HD/Users/barryhunt/Desktop/huntfilms1/sample.html">Sample work</a></li>
    <li><a href="file:///Macintosh HD/Users/barryhunt/Desktop/huntfilms1/Contact.html">Contact Us</a>    </li>
</ul>
<div id="mainContent">
    <p><iframe src="http://player.vimeo.com/video/17962693?title=0&byline=0&portrait=0" width="400" height="320" frameborder="0" webkitAllowFullScreen allowFullScreen></iframe> </p>
    <p> </p>
    <p>Welcome! </p>
    <p>Hunt Films was set up in January 2011 by documentary maker Barry Hunt.</p>
    <p>Barry received training in TV and Video Production with FÁS in Tralee, Co Kerry. During this training Barry produced a series of short films about local artists. In 2006 he worked as assistant editor on the successful RTÉ drama series, ‘Love is the Dfile:///Users/barryhunt/Desktop/Picture%201.pngrug’.</p>
    <p>Since 2010 Barry has embarked on solo projects producing two entertaining half hour documentaries. 'Liberation', explores the world of pigeon racing in Dublin. This film was very well received at the Galway Film Festival 2011. More recently Barry produced 'The Gregory Seat', a documentary which follows Maureen O'Sullivan’s campaign to be elected in the 2011 General Election.</p>
    <p>Barry looks forward to producing more documentaries. He is interested in human stories and hopes that this will form the basis of his future work. At present, Barry is developing projects for film festivals and general broadcast    </p>
    <p> </p>
</div>
<div id="footer">
    <p>Footer</p>
</div>
</div>
<script type="text/javascript">

</script>
</body>
</html>
server view of files uploaded file:///Users/barryhunt/Desktop/Picture%201.png

here is the code still not working can anyone tell me why
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body class="oneColElsCtrHdr">
<div id="container">
<div id="header">
    <h1>Header</h1>
</div>
<div id="mainContent">
    <ul id="MenuBar1" class="MenuBarHorizontal">
      <li><a class="MenuBarItemSubmenu" href="#">Item 1</a>
        <ul>
          <li><a href="#">Item 1.1</a></li>
          <li><a href="#">Item 1.2</a></li>
          <li><a href="#">Item 1.3</a></li>
        </ul>
      </li>
      <li><a href="#">Item 2</a></li>
      <li><a class="MenuBarItemSubmenu" href="#">Item 3</a>
        <ul>
          <li><a class="MenuBarItemSubmenu" href="#">Item 3.1</a>
            <ul>
              <li><a href="#">Item 3.1.1</a></li>
              <li><a href="#">Item 3.1.2</a></li>
            </ul>
          </li>
          <li><a href="#">Item 3.2</a></li>
          <li><a href="#">Item 3.3</a></li>
        </ul>
      </li>
      <li><a href="#">Item 4</a></li>
    </ul>
    <h1> </h1>
    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio. Donec et ipsum et sapien vehicula nonummy. Suspendisse potenti. Fusce varius urna id quam. Sed neque mi, varius eget, tincidunt nec, suscipit id, libero. In eget purus. Vestibulum ut nisl. Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. Fusce metus mi, eleifend sollicitudin, molestie id, varius et, nibh. Donec nec libero.</p>
    <h2>H2 level heading </h2>
    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio.</p>
</div>
<div id="footer">
    <p>Footer</p>
</div>
</div>
<script type="text/javascript">

</script>
</body>
</html>

Wi-Fi problem with my Macbook Help

I have a newer Macbook with 10.5.8 operating system, tons of extra ram and an upgraded hard drive.
At work my wireless connection is plenty strong and works perfectly fine, but at home my web pages and any videos load extremely slow. At work and at home I use the same linksys router. Normally I would figure it's a problem with my router at home but I have another macbook with lesser computing power and an older operating system but it works perfectly fine at home along with my ipod touch.
Does any one have any idea what the problem could be?
thanks for an advice in advance.

Linksys routers are known for having terrible WiFi especially with older firmwares. The problem might still occur with the newest one too, though. Try using a cable and turning off WiFi on your MacBook and see if the problems go away. If that's the case you could get a new router or a new WiFi access point like the Airport Express to solve the issue.

6 weeks of problems with Ical- Please help

For 6 weeks now I have been having problem after problem with Mobileme, Ical, and contacts synchronizing with my imac, laptop, and iphone after at least two years of no problems. I have been to the Apple store over 6 times and have had 3-4 hour long chats with Apple technicians and have had 3-4 emails with an advanced technicians. Everyone is quite nice and really seems to be trying to help fix the problems, sadly, this situation is still not resolved. My confidence that Apple knows what is going wrong or knows how to fix it have really taken a hit and I'd ask anyone who has the savvy to help me with this to PLEASE help me out here.
The current situation is:
Cannot log into Mobile me to get my calenders - Apple can't either. We both can log in to idisc, contacts, etc. though all are duplicated 2-3 times.
If you try to sync with the phone, including after re-setting what appears to be a correct calender on to mobileme first, the phone calender will appear completely blank.
Manual sync with the USB works. However, even if you totally wipe the whole iphone and then install just what is on the computer, some appointments are missing on the iphone! I have verified that there are just the correct calenders listed on the imac so the appointments missing on the iphone are part of the calender listed on the imac. (When I wiped the iphone and choose automatic sync, numerous calenders were seen. Part of the reason there were so many calenders at all was part of the problem I initially had and the result of apple technicians trying to fix it!)
I now have. mac and .me mail accounts listed on my iphone despite the fact that the .mac account had been replaced with the .me account of the same name by at least two technicians at the Apple Store and Ichat.
I need help immediately and cannot either wait for Apple or have much confidence they know what is going on.

Yes this has been a nightmare for me and started with duplicate dates, followed by duplicate calenders, and 2 years of lost data, followed by duplicate contacts. I am clear that some of this is the direct result of how I was advised to fix my problems.
I have seen 2-3 people report problems around this same time frame. The techs at apple have denied a system problem from that time but like you it is odd that a system that seemed to work perfectly went wrong at that for at least the two of us and three other people that I know of. I have only reviewed a portion of the posts.
My conclusion is that Apple does not provide adequate warnings or instructions regarding how to interface with ical, syncing with mobile me, or what needs to be backed up even though one is putting one's data on the cloud and 1-3 other devices. Further, the protocols Apple techs use to deal with these kinds of issues seem to be leading to more problems.
I have saved a comprehensive log of my chats with Apple and my interactions with the "genius bar" at Apple that I'd be willing to post here or share via email that shows how this process evolved and what choices were made to remedy the situation.
To briefly illustrate my point consider these things I've learned in the process:
1). Apple does not design all of it's key software with auto back-up like they do with Final Cut, or Intuit does with "Quicken". Apple told me that they expect someone would use the "export" or " back-up iCal" from the file menu. They also said that I had the option of using the utility "back-up" or "Time Machine" if I wanted "auto" back up.
I must admit to feeling pretty stupid about all of this until I remembered that Apple emphasized the automatics of "the cloud" as next step after the "Palm". Even the "Missing Manual" bills it that way. So... I just plugged and played as they say and did not actively make sure that I needed to back Ical up! I also thought that since my iphone backs everything up when you synchronize that everything would be saved. Anyone have any ideas how to get your calender off the iphone back up if the cloud and your computer files are wrong? I've been told that you cannot. I am also a bit unclear about what files need to be backed up if I want to use Time machine or back up to protect my Calenders? Again can't they just say so?
2). It has come to my attention after talking to 4 different Apple reps that the Itunes interface is a bit unclear. I was told that IF YOU USE MOBILE ME, YOU CANNOT HAVE THE SYNC BOXEXS CHECKED FOR ICAL, MAIL,CONTACTS, OR YOU WILL HAVE DUPLICATE ENTRIES. I am not sure if this is true or what started the whole problem. It does kind of make sense given there are Mobile me options in the system prefs for what to do with them as well.
Apple should have told me the above after they tried to resolve this duplicate problem last December by resetting my mobile me with my laptop, deleting and reinstalling my account on my phone and syncing with Mobile me. If they had, I would not have had the duplicate entries and as well as accounts a few weeks later. I also would not have tried using the same method to re-fix the problem leading to all my calenders prior to mid December being destroyed!
Why wasn't that warning in the itunes sync dialogue box to begin with?

Problem with tables -- need help!

I am having problems with table formatting, when using
Preformatted text. The tables look fine in the WYSIWYG editor, but
have lots of extra space above and below the text when looking at
the output files.
I will attach the code from one of the HTML files from my
project, so you can see what I'm talking about.
Thanks.

Well, if you're talking about the single-celled table with
the line:
<p class=Preformatted>[assembly:
Ace.AceAssembly]</p>
</pre>
... you can eliminate the <P> tags. that will give you
one line less. Otherwise, your remaining space is the result of the
<PRE> tag. It, like the <XMP> tag, gives it one line of
space beneath as well.
Your alternative beyond that would be to, when needed, wrap
up the script in Javascript. That line, for instance, wouldn't need
it.

Problems with F4 Value Help in NW2004s Portal

Hello,
we are having some troubles with the F4 ValueHelp Extension from the Advanced BSP Programming book (and the blogs of course).
We've implemented the solution on a 4.7 backend and portal 6.0. No problems there, everything was working fine.
We now moved to erp2005 (WebAS 700) and NW2004s Portal (7.0).
The popup shows and I can select entries from the list. But when clicking the ok icon a javascript error is thrown stating that 'parent.document.getElementById(...)' is null or no object.
I think the problem is, that by making a call to 'parent' we are searching in the portal frame and not the BSP. There (in the portal frame) the element is not known so the error is thrown.
I allready changed from the dialog_ie6.js provided on the BookCD to the one delivered by SAP. Did nothing regarding the error.
I also tried changing ZCL_BSP_M_INPUT_HELP->BUILD_ACCEPT_SELECTION_SCRIPT. I changed all the "parent.document.get..." "to document.get...". The error message was still the same, 'parent.document.getElementById(...)' is null or no object.
So now I'm kind of stuck. If I try the example outside the portal everything works as expected. So this clearly seems to be a problem with the portal integration. All involved BSP-Apps are marked as "supports portal integration".
Any ideas on this topic?
Thanks and kind regards,
Alexander Sperling

I have a working solution to the problem. It isn't the nicest solution because it will probably require some modifications to the application that hosts the value help, but we will get to that in a second.
I tried many different ways to come up with a solution that would still work via JavaScript. The portal is now loading the popup javascript in the master frame. It registers event handlers so that if any application triggers a popup internally it "hi-jacks" the event. So regardless of what I change in the BSP javascript library, it gets overriden by the portal one. The portal also now even enforeces its theme on the inner page in the popup. Truly the portal takes complete control over the inner html of the popup.
To make things worse the popop has not path to reach the source that triggered it. The source objects are tracked in the javascript, but because the master frame takes over; the popup window only has access and visibility to the master frame and the navigation frame. In essence in the DOM it is now higher in the stack than the object that actually triggered it.
Web Dynpro gets around this because it doesn't use any client side mechanisms to communicate it results back to the source frame. Web Dynpro has the luxury of always being stateful and therefore can make certain assumptions that would never work in BSP. The hi-jacking is an excellent solution for Web Dynpro. The portal can then override the functionality of Web Dynpro - providing the new functionality of floating the dialog box over the entire portal - without having to make any changes to the Web Dynpro Framework. However they never had our little BSP solution in bind obviously.
It might be possible to completely rewrite the popup_ie.js and popup_ns.js to use all different event, method and variable names. This separate version could then provide complete separation from the portal script. However this is just a theory. I'm afraid that I wouldn't have the bandwidth to rewrite the entire script right now so I focused on a quicker solution.
The only approach that I could come up was to follow the Web Dynpro approach and return to the server with the value. To do that I used Portal Eventing. Portal Eventing allows us to pass a value to the source frame regaurdless of our relative positions in the DOM.
In my inner BSP application for the value help (ZES_VALUEHELP), I made the following change in the model method BUILD_ACCEPT_SEL_SCRIPT_V2. At line 141 I changed the logic. Instead of using JavaScript to write the selected value back into the source element, we will just trigger a Portal Event:
****With an InputField we write the contents directly back into the element
      ELSE.
        CONCATENATE me->js_close1
        `portalFireEvent('com.sap','`
        me->element_id
        `',"`
        key
        `");`
         INTO me->js_close1.
        EXIT.
The other change is within the Element handler class for inputHelpV2 - ZCL_ES_BSP_ELMNT_INPUT_HELP_V2. We need to register the listener for the Portal Event. Therefore in DO_AT_BEGINNING we will add the follwing at line 23 (right after we place the Element Id into the URL Parameters Table.
data: portal_event type ref to cl_portal_event.
portal_event = cl_portal_event=>factory(
    name = <wa_params>-value
    namespace = 'com.sap' ).
while m_page_context->element_process( element = portal_event ) = co_element_continue.
endwhile. "End portalEvent Render
Overally using the portal eventing actually is an intersting approach. There is only one drawback, now we have a server side event. That being the case, our application now needs some event logic to process this event and populate the value. Depending upon if you are using MVC, Data Binding, or Flow Logic this could vary - and would have to handled by each application. The nice thing about the old approach was that it all happened via JavaScript on the Frontend and didn't require the application programmer to do anything - that was obviously its weakness as well.

Pdf causes problem with opening files: help, please!

The operating system on my computer is Windows xp and I use Adobe version 11.0.6.
I am having a problem that arises when I get a warning message (particularly when opening pdf or xls files): "AcroRd32.exe - Application Error: The exception unknown software exception (Oxc0000409) occurred in the application at location 0x00411e0b". I am then unable to open most files - pdf, xls, Word etc. - until I switch the machine off and then on. I have discussed this problem with Microsoft, who eventually said that it seems to be caused by something related to Acrobat software.
I should be grateful for advice or help from any participant in this forum.
Many thanks in advance.
John Porter

To test the automount hypothesis, you could create
a new user with a home directory someplace completely different and NFS-free, like /opt
useradd -m -d /opt/testuser -s /bin/bash testuser
passwd testuser
Then login to CDE as the user.
It does sound like there's something broken with $HOME/.dt
cheers

My phone although fully charged has just switched itself off and won't turn back on again! I'm just coming to the end of a 2 year contract and never had any problems with it. Help please!

My iPhone 4 although fully charges has just switched itself off and won't turn back on again. I've tried taking the sim card out but nothing happens. I'm just coming to the end of a 2 year contract and never had any problems with it before. Help please.

Start here
http://support.apple.com/kb/HT1430

Indesign CS4 Problem with weird characters HELP!!!

I am rather new to Indesign, but have been using it for several months with no problems. I design our church bulletins and my youth group bulletins using it every week. I don't know what happened but I opened previous documents tonight and when I tried to change the text with the text boxes, it shows the text being changed, but when I hit space or click off the text it turns into boxes instead of the text characters I typed. I have tried opening other docs and even other text boxes within the docs and everytime it does the same thing. When changing numbers it brings up a little box with numbers and chinese looking symbols next to them. This is really confusing me and google searching has come up with nothing to help. Can someone please help me before I lose my mind???

More inforamtion about restoring preferences can be found here: Adobe InDesign CS4 * Setting preferences
Read everything.
If that doesn't solve the problem, it sounds like a font problem. Are you having any other problems in other applications? It's possible you've selected a differnt fron than you are used to using.

PROBLEM WITH MY MESSAGES HELP PLEASE!

I am having a problem with my phone. If i save the number in my address book as normal...i.e 079 etc, when that number sends me a message it does NOT come up with a name just the number, BUT if i save the number in my address book as +44 when a text comes through the name WILL show but when the number rings the name wont, it just a number...does that make sense?! can anyone help me please...!

Welcme to the Frums!
I am not sure about the +44 stuff - someone with that experience will help ya on that one, but with my address book, I have to add the number then add a name then when they call, their name shows up.
Nurse-Berry
Follow NurseBerry08 on Twitter

Audio/Firewire Problems with Mini, Please Help!

I just bought a brand new Mini from Amazon.com and am having some problems. First, when I plug computer speakers into the mini, the sound continues to come from the internal speaker and the mini ignores the speakers. In System Preferences, it doesn't even recognize that something is plugged into the machine.
Second, the Mini does not recognize my external, Firewire iSight camera. In System Profiler, it does not show anything connected to the port when the camera is connected.
The Mini is the latest rev running 10.4.11. Leopard upgrade disks should be in the mail soon.
Any ideas as to what is wrong? Should I just return to Amazon for a replacement? Thanks for your help!

Having just posted in a similar situation, pardon the cut and paste, but these are the first two (and easiest) things to try:
First reset parameter RAM - it's an area of non-volatile memory used for system settings and hardware configuration. It it gets corrupted, it can cause odd problems.
Reset PRAM
-Shut down the computer.
-Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in the next step but one.
-Turn on the computer.
-Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
-Hold the keys down until the computer restarts and you hear the startup sound for the second time.
-Release the keys.
Next, perform an SMC reset. The SMC is the device which controls system hardware and devices, so if there is a problem with hardware components not functioning, it could be that.
To reset the SMC on an Intel mini:
-From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
-Unplug all cables from the computer, including the power cord and any display cables.
-Wait at least 15 seconds.
-Plug the power cord back in, making sure the power button is not being pressed at the time.
-Then reconnect your keyboard and mouse to the computer.
-Press the power button on the back to start up your computer.

Utf8 problem with wmode=opaque, help

Hello all,
can someone please explain to me why i cant write Russian or France or Hebrew or any other utf char
when i am embadding my swf with opaque wmode??
is there a way to work around it?
i have an HTML script with flash inside it and the text filed in the flash wont except any language other then English
everything else is gibberish
I am new to AS3 (LAMP dev) i looked everywhere but no decent answer
please help me to understand this issue
thanks.

you having problem with special characters? does your keyboard only type english characters? try switching wmode off..

Problem with osX, please help

Hey my name is casey and I am having problems with os X. I start up my iBook G4 and it loads up the background image and the dock only. Nothing on the dock works. I think it is the window server that is not loading. I dont know what I did or why this happened. Does anyone know how to fix this? I tried to connect up with my friends macbook and check the hard drive for errors but couldnt find anything that would lead to this. Thanks for the help.

casebob76:
Boot from your install disk holding down the "C" key. Once booted go to the Installer menu and open Disk Utility. Select your HDD (manufacturer ID) in left panel, and First Aid in main panel. Click on Repair Disk. If DU reports no erros or repairs not needed click on Repair Disk Permissions. If DU reports errors click Repair again and again until no errors are reported. If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior.
Good luck.
cornelius

IPhone 4 problems? I'm having a ton of problems with my IPhone. Help?

Similar Messages

Maybe you are looking for