IPhone 4 Problems (Slow, Not Loading, Double Install)

Hello, my Verizon iPhone 4 has been acting progressivly worse lately. The phone is sluggish and especially laggy in games and other apps (even a clock app where the second hand 'lurches'). Today I installed a new app and it had the icon on two separate screens (I had to power off/on the phone to get it fixed). Also, the app store takes forever to load or just stops loading (even on fast wifi). Anyone else have these problems or have a suggestion? I did a full restore not long ago with no real improvement. The phone is ~1.5 years old.

what i would do is a 'hard reset', meaning hold the on/off button and the home button until the slider appears and ignore it until the apple logo appears. you could also try restoring as new, but you will have to reload all your stuff. make sure you back up first.

Similar Messages

  • PE 9 will not load after installing Elements 10

    Installed Elements 10 on Vista 64-bit.  Did not uninstall Elements 9.  Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk.  There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2.  Tried disk 2 of 3 from package, nothing happens.

    Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
      From: Steve Grisetti
      Sent: Monday, January 02, 2012 7:09 PM
      To: cptiger
      Subject: PE 9 will not load after installing Elements 10
            Re: PE 9 will not load after installing Elements 10
            created by Steve Grisetti in Premiere Elements - View the full discussion

  • Hp software interface does not load after installing printer 6500A plus

    I own a 6500A plus printer that is connected via wifi to my windows 8.1 laptop. At certain point in time the desktop icon stopped functioning, i.e double cliking it does not do anything. The same happens if i do that through start->programs->hp...
    more info:
    1. running HP Officejet 6500 E710n-z.exe from the install folder does nothing (also when running as admin)
    2. installation of the software (the full package) completes with no errors
    3. printer prints fine and scans throught the printer interface wihtout a problem
    4. tried uninstall and reinstall 2-3 times, both as a wireless printer and USB printer, no errors during install
    5. The hp print and scan doctor, finds no problem and at the end im able to run Test Scan and the interface opens and works fine.
    6. i ran sfc /scannow it says it founds some problems it cant repair - dont know if it means anything
    7. in the Devices and Printers screen i see the printer listed and i'm able to print a test page
    dontknow what to do next

    Hello Salmonela,
    Welcome to the HP Support Forums!
    That is a very well done post, very informative. Regarding the software interface not loading, I would like to suggest a means of uninstall and install that you may not have tried.
    I would like you to use the Microsoft Fixit to uninstall. Then use the HP Printer Install Wizard to install the software again.
    Let me know if this clears things up.
    Happy Turkey Day!
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Adobe Flash Player Problem: "Movie Not Loaded"

    new user to mac.
    i'm getting more and more frustrated with this computer.
    what's bugging me the most right now is
    i am unable to view videos on certain websites.
    rather than showing the content,
    a white box appears.
    when i right click on the white box,
    it says "movie not loaded" (in gray) and adobe flash player 9 (in black).
    i can't click on the gray line.
    when i click on the black line, it brings me to the adobe website and tells me adobe flash player 9 has been successfully installed.
    i am fairly sure this has nothing to do with heavy traffic.
    any insights on how to resolve this issue?
    cheers.

    Adobe Flash Player Problem
    http://www.adobeforums.com

  • ECP Page not loading after installing SP3 on Exchange 2010 CAS&HUB Server

    I have installed SP3 on my Exchange CAS Server after that OWA was not working, hence I have reset owa, ecp,ews,oab, autodiscover & active sync virtual directory from EMC. After that OWA is started working.
    But While accessing ECP , content is not loading properly. I have reset virtual directory of ecp 2 times but problem is still same. 
    Kashi

    Did you tested different browser?
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Chromium does not (load image & install extension)

    Chromium does not (load image on Google plus & install extension)
    Also it does not load images on some sites such as chrome web store.
    I had this problem after I upgrade to chromium 14.0.835.186-1 64-bit
    I am sure of that, I select this "Preferences -> Under the Hood -> Content Settings -> Show all images (recommended)"
    When I want to install any extension. it will not install.
    This message appears:
    ==
    This webpage is not available
    Chromium could not load the webpage because clients2.googleusercontent.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection.
    ==
    I removed the package and deleted all configurations and caches.then install it but that did not fix it.
    I tried it on Firefox. it is working well.
    I don't know if this is a bug with chromium or there is something wrong in my configuration.

    it is working now.
    maybe there was a lag from the server.
    Thank you.
    Last edited by G_P (2011-09-29 14:29:53)

  • Safari 5.1.10 slow/not loading on iMac os x 10.6.8

    Hello,
    Recently my Safari is VERY slow, it is not loading some web pages properly, and not uploading or displaying some pictures.
    I havent done anything diferent or uploadae any updates.
    I have tried everything to resolve the issue-
    -empty cache,
    -check for up-dates,
    -reinstall safari (twice!)
    -Check broadband (I have a new macbook pro, and Safari works fine on this as it is a more recent version)
    -remove all extensions
    - even checked my HD!
    Please help if you have any suggestions,...this is driving me mad, as I can't even access email on gmail!
    Thanks in advance!

    How do you turn IPv6 off in Safari 5.1.10?
    I don't see anyway to do this.
    Lately, Safari is not only loading slowly upon initial opening, but it's also slow to load new pages, and it's regularly loosing contact with webpages in previous tabs I opened. I'll go back to a tab, after moving to a new one, only to find it blank, and then I have to reload it, which takes f o r e v e r !
    Then I find my entire system get stuck and I can't do anything. Sometimes I can force quit an application and other times not. Many times lately, I find my computer is just frozen and all I can do is reboot it manually to get it working again.

  • ICloud 4.0.1 will not load and install on Windows 7 desktop

    When I try to use the Apple Software Update to load and install iCloud 4.0.1 I get an error message: "Errors occurred while installing the updates. If the problem persists choose Tools > Download Only and try installing manually."
    When I do as it suggests I get another error message: "iCloud for Windows has an invalid signature. The Download has been removed."

    It says 'This solved my question by squiggy01 on Dec 5, 2014 1:47 PM
    Then it says: 'I have the same problem and have been trying for weeks to correct it.'
    Then it says 'See the answer in context', I click on this and nothing comes up, what am I doing wrong to get the solution?

  • I-mac will not load double diamond poker

    Last yr. my son bought my wife and himself i-mac computers for christmas. I am 70 and play games to keep occupied mine would not play double diamond poker but his would, my hard drive was replaced last wk [under warranty] it still will play every game on the internet except diouble diamnod poker. This may seem a very small problem to some but it is a large part of my easy time, i have tried everything told to me on the internet to no avail so if any body has any sugestions please let me know. We have 2 dells in the house and they both play it. Thank you.

    Have you contacted the developers of the game for details of the system requirements?

  • PSF's not loading after installing Lion

    Email's and other documents PDF's are not downloading since installing LION

    OK in Mail (I am assuming you are using the Mail App) once you see the pdf file on the screen you can right click it and choose the appropriate option. Here is a sample of the bottom of an email I recieved yesterday show what it looks like after I highlighted the file and right clicked it:
    From there simply choose the option you want.
    NOTE!!!!!: If you are not using the OS X Mail App please advise which email tool you are using.

  • Safari 4.1 very slow & not loading

    Hi,
    I'm running Safari 4.1 and it's very slow and pages don't load properly. I reset Safari with all of the options checked off and it's still the same. I've read several posts and I saw many different ideas and fixes but not sure which one would pertain to my situation. Any advice would be appreciated!

    Welcome to the forums!
    (First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit. Control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode)
    Do you have enough RAM? Less than 1GB can cause slowness. Is your hard drive too full? Less than 15%, or 15GB, of free space can also cause slowness.
    If you use a router, does it have the latest firmware installed?
    Adding DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
    If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
    http://support.apple.com/kb/TS2296
    If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
    (An explanation of why using Open DNS is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
    Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
    Wikipedia also has an interesting article about Open DNS:
    http://en.wikipedia.org/wiki/OpenDNS
    Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
    This is Apple's guidance on iPv6:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
    Click on Apply Now and close the window.
    Restart Safari, and repair permissions.
    Also, third-party add-ons created for a previous version of Safari may cause problems:
    http://support.apple.com/kb/TS3230?viewlocale=en_US
    If that didn't do it, then try this as well:
    Empty Safari's cache (from the Safari menu), then close Safari.
    Go to Home/Library/Safari and delete the following files:
    form values
    download.plist
    Then go to Home/Library/Preferences and delete
    com.apple.Safari.plist
    Repair permissions (in Disk Utility).
    Start up Safari again, and things should have improved.
    More useful information here:
    http://guides.macrumors.com/SpeedupSafari

  • [Solved] ATI Mobility Radeon HD 2300 Problem - fglrx not loading

    I changed the currently unreliable GS 8600 nvidia card in my laptop to a compatible old ATI HD 2300 card from a similar model laptop but I can't get the Catalyst drivers to work with it. The open source driver xf86-video-ati works well with it for basic use, but is not so good for 3D. This card should work with an Amilo xi-2428 & has done for other people who have developed faulty nvidia cards.
    I have the legacy driver installed from AUR (Catalyst-total-hd234k) and have enabled Vi0L0's [xorg112] server properly in pacman.conf & downgraded to Xorg-server 1.12. I also tried downgrading to Xorg-server 1.11 & reinstalling the drivers from AUR. Plus I have enabled and tried Vi0L0's [catalyst-hd234k] repo in place of the AUR package each time too. Made no difference. I've blacklisted radeon too.
    When the laptop boots systemd-modules-load.service shows as failed.
    $ sudo systemctl --failed
    UNIT LOAD ACTIVE SUB DESCRIPTION
    systemd-modules-load.service loaded failed failed Load Kernel Modules
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    1 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    [fyn@Finnix ~]$ systemctl status systemd-modules-load
    systemd-modules-load.service - Load Kernel Modules
    Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
    Active: failed (Result: exit-code) since Wed, 2012-12-19 15:29:57 GMT; 7min ago
    Docs: man:systemd-modules-load.service(8)
    man:modules-load.d(5)
    Process: 121 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
    It is only the fglrx module which fails to load:-
    $ sudo journalctl -b _PID=121
    -- Logs begin at Fri, 2012-10-26 09:21:22 GMT, end at Wed, 2012-12-19 15:38:07 G
    Dec 19 15:29:56 Finnix systemd-modules-load[121]: Failed to insert 'fglrx': No such device
    Dec 19 15:29:56 Finnix systemd-modules-load[121]: Inserted module 'nfs'
    Dec 19 15:29:57 Finnix systemd-modules-load[121]: Inserted module 'vboxnetflt'
    I have no idea how to get fglrx to load & since it fails to load so early during boot I doubt the problem lies with my Xorg.conf. Likewise neither aticonfig or the ATI control center work.
    aticonfig: No supported adapters detected
    amdcccle just give this message
    "There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following.
    No AMD graphics driver is installed, or the AMD driver is not functioning properly.
    Please install the AMD driver appropriate for you AMD hardware, or configure using aticonfig."
    Graphic card info
    $ hwinfo --gfxcard
    27: PCI 100.0: 0300 VGA compatible controller (VGA)
    [Created at pci.319]
    Unique ID: VCu0.SZRyUClQNUF
    Parent ID: vSkL.rRA4AOLb3d5
    SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
    SysFS BusID: 0000:01:00.0
    Hardware Class: graphics card
    Model: "ATI M71 [Mobility Radeon X2100]"
    Vendor: pci 0x1002 "ATI Technologies Inc"
    Device: pci 0x7210 "M71 [Mobility Radeon X2100]"
    SubVendor: pci 0x1734 "Fujitsu Technology Solutions"
    SubDevice: pci 0x1107
    Revision: 0xce
    Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
    I/O Ports: 0x2000-0x2fff (rw)
    Memory Range: 0xcfef0000-0xcfefffff (rw,non-prefetchable)
    Memory Range: 0xcfe00000-0xcfe1ffff (ro,non-prefetchable,disabled)
    IRQ: 5 (no events)
    I/O Ports: 0x3c0-0x3df (rw)
    Module Alias: "pci:v00001002d00007210sv00001734sd00001107bc03sc00i00"
    Driver Info #0:
    Driver Status: radeon is not active
    Driver Activation Cmd: "modprobe radeon"
    Config Status: cfg=new, avail=yes, need=no, active=unknown
    Attached to: #8 (PCI bridge)
    Primary display adapter: #27
    my Xorg.conf derived mainly from a newly generated config using Xorg :0 -configure
    Section "ServerLayout"
    Identifier "Arch"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "AccelDFS" # [<bool>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "ColorTiling" # [<bool>]
    #Option "ColorTiling2D" # [<bool>]
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "AccelMethod" # <str>
    #Option "DRI" # [<bool>]
    #Option "TVStandard" # <str>
    #Option "EXAVSync" # [<bool>]
    #Option "EXAPixmaps" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "EnablePageFlip" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    Identifier "Card0"
    Driver "fglrx" # Essential.
    # Driver "vesa"
    BusID "PCI:1:0:0" # Recommended if autodetect fails.
    Option "OpenGLOverlay" "0" ##
    Option "XAANoOffscreenPixmaps" "false" ##
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card1"
    Driver "fglrx"
    # Driver "vesa"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24 # Should not change from '24'
    Modes "1280x800" "1280x800" ## 1st value=default resolution, 2nd=maximum.
    Virtual 1664 1200 ## (x+64, y) to workaround potential OGL rect. artifacts/
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666 # May help enable direct rendering.
    EndSection
    Xorg log
    [ 22.305]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 22.306] X Protocol Version 11, Revision 0
    [ 22.306] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 22.307] Current Operating System: Linux Finnix 3.6.10-1-ARCH #1 SMP PREEMPT Tue Dec 11 09:40:17 CET 2012 x86_64
    [ 22.307] Kernel command line: root=/dev/sda3 ro video=vesa:off vga=0x360 init=/usr/lib/systemd/systemd nomodeset
    [ 22.308] Build Date: 27 August 2012 08:04:39AM
    [ 22.308]
    [ 22.309] Current version of pixman: 0.28.2
    [ 22.309] Before reporting problems, check
    to make sure that you have the latest version.
    [ 22.310] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.312] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 19 13:14:33 2012
    [ 22.312] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.313] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.313] (==) ServerLayout "Arch"
    [ 22.313] (**) |-->Screen "Screen0" (0)
    [ 22.313] (**) | |-->Monitor "Monitor0"
    [ 22.313] (**) | |-->Device "Card0"
    [ 22.313] (**) |-->Screen "Screen1" (1)
    [ 22.313] (**) | |-->Monitor "Monitor1"
    [ 22.313] (**) | |-->Device "Card1"
    [ 22.313] (**) |-->Input Device "Mouse0"
    [ 22.313] (**) |-->Input Device "Keyboard0"
    [ 22.313] (==) Automatically adding devices
    [ 22.313] (==) Automatically enabling devices
    [ 22.313] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.313] Entry deleted from font path.
    [ 22.313] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.313] Entry deleted from font path.
    [ 22.313] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 22.313] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.313] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 22.313] (WW) Disabling Mouse0
    [ 22.314] (WW) Disabling Keyboard0
    [ 22.314] (II) Loader magic: 0x7c8b00
    [ 22.314] (II) Module ABI versions:
    [ 22.314] X.Org ANSI C Emulation: 0.4
    [ 22.314] X.Org Video Driver: 12.1
    [ 22.314] X.Org XInput driver : 16.0
    [ 22.314] X.Org Server Extension : 6.0
    [ 22.315] (--) PCI:*(0:1:0:0) 1002:7210:1734:1107 rev 206, Mem @ 0xd0000000/268435456, 0xcfef0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    [ 22.315] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.315] (II) "extmod" will be loaded by default.
    [ 22.315] (II) "dbe" will be loaded by default.
    [ 22.315] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.315] (II) "record" will be loaded by default.
    [ 22.315] (II) "dri" will be loaded by default.
    [ 22.315] (II) "dri2" will be loaded by default.
    [ 22.315] (II) LoadModule: "glx"
    [ 22.315] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.315] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 22.315] compiled for 6.9.0, module version = 1.0.0
    [ 22.315] (II) Loading extension GLX
    [ 22.315] (II) LoadModule: "extmod"
    [ 22.315] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.315] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.315] compiled for 1.12.4, module version = 1.0.0
    [ 22.315] Module class: X.Org Server Extension
    [ 22.315] ABI class: X.Org Server Extension, version 6.0
    [ 22.315] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.316] (II) Loading extension XFree86-VidModeExtension
    [ 22.316] (II) Loading extension XFree86-DGA
    [ 22.316] (II) Loading extension DPMS
    [ 22.316] (II) Loading extension XVideo
    [ 22.316] (II) Loading extension XVideo-MotionCompensation
    [ 22.316] (II) Loading extension X-Resource
    [ 22.316] (II) LoadModule: "dbe"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.316] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.0.0
    [ 22.316] Module class: X.Org Server Extension
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension DOUBLE-BUFFER
    [ 22.316] (II) LoadModule: "record"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.316] (II) Module record: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.13.0
    [ 22.316] Module class: X.Org Server Extension
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension RECORD
    [ 22.316] (II) LoadModule: "dri"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 22.316] (II) Module dri: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.0.0
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension XFree86-DRI
    [ 22.316] (II) LoadModule: "dri2"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.317] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.317] compiled for 1.12.4, module version = 1.2.0
    [ 22.317] ABI class: X.Org Server Extension, version 6.0
    [ 22.317] (II) Loading extension DRI2
    [ 22.317] (II) LoadModule: "fglrx"
    [ 22.317] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 22.333] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [ 22.333] compiled for 1.4.99.906, module version = 8.97.2
    [ 22.333] Module class: X.Org Video Driver
    [ 22.333] (II) Loading sub module "fglrxdrm"
    [ 22.333] (II) LoadModule: "fglrxdrm"
    [ 22.333] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 22.333] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 22.333] compiled for 1.4.99.906, module version = 8.97.2
    [ 22.333] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
    [ 22.333] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
    [ 22.333] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
    [ 22.333] (++) using VT number 1
    [ 22.334] (WW) Falling back to old probe method for fglrx
    [ 22.337] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 22.337] (EE) No supported AMD display adapters were found
    [ 22.337] (EE) No devices detected.
    [ 22.337]
    Fatal server error:
    [ 22.337] no screens found
    [ 22.337]
    Please consult the The X.Org Foundation support
    at
    for help.
    [ 22.337] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 22.337]
    Solved. The  ATI Mobility Radeon HD 2300 was based on an earlier design & was not really one of the HD 2*** cards, even tho it was released as one (HD 2*** cards are R600 series while the HD 2300 is based on the R500 generation). So the offical drivers for it were relegated to legacy in 2009 with AMD's Catalyst 9.3 release & are no longer supported. Pretty crappy considering the HD 2300 was only on the market from 2007.
    To use the official catalyst drivers would require xorg 1.5.3 and kernel 2.6.29..... with no support for newer distros.
    Using open source drivers, cannot remember all the packages but have listed some below in case it helps anyone:-
    xf86-video-ati
    ati-dri
    lib32-ati-dri
    libtxc_dxtn
    lib32-libtxc_dxtn
    mesa
    lib32-mesa
    No xorg.conf needed for it using kms, but can make a config file to tweak if you like in the xorg.conf.d directory called 20-radeon.conf
    Last edited by Nixie (2012-12-24 17:21:29)

    Thanks for the response. It is not an obvious hardware issue. I would contact HP phone support to get the hardware addressed. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know if you have any other questions or concerns. Thanks!
    Mario
    I worked on behalf of HP.

  • Hyperlink Problem, slow PDF load

    I had previously built a Web site with an earlier version of iWeb, and posted it on my site (not .mac) with no problems. I needed to redesign the site; I used iWeb version 2.02. I did everything the way I did before as far as creating hyperlinks, but this time there were problems. The hyperlinks assigned to text mostly work, but the pdf's associated with them load incredibly slowly. Much slower than previously. Additionally, I tried to use images to create hyperlinks, also to pdf files, and some of them worked and others didn't. They were just dead. I tried several times but to no avail.
    Does anybody have any suggestions? Also, when installing a hyperlink, and choosing the related file, is there anyway to edit the file's actual pathway? The dialog box just allows me to choose files, which it then loads automatically.
    Thanks,
    Rex

    Hi,
    Well, then why don't we get right to figuring out what the reasons are.
    -Can I assume we are talking about PDF documents created using a MAC?
    -Being exported using either Pages or the Print dialog?
    -Using what quality setting if in Pages?
    -Compressing or not compressing using Quartz Filter in the Print Dialog?
    -Exported files to be opened using which application, browser or program?
    If you are making these decisions as necessary than the only other thing you could look at would be the content imported into the documents at time of creation. That is unless your documents have security issues that created problems for those using other platforms during the last year.
    Working your way through the above checklist should help you answer your original question.

  • IE11 slow to load after installing EMET 5.1

    After installing EMET 5.1 IE11 is taking 5-20 seconds to load. Basically the page stays blank for several seconds and the behavior varies depending on the hardware in use. Older machines take longer to load. If we remove the msthml.dll from EAF+ performance
    almost back to normal?

    Thanks Razmee
    I did reset network settings but problem is still there.
    iPhone does not remember the password.
    I did a network reset and also a hard reboot holding upper and lower buttons.
    So I have to reset the modem/router every time i want to connect the iPhone to WIFI
    Never had a problem until installing iOS 5.1

  • Mac running slow - Not loading web pages

    Something is wrong with my Mac. Out of the blue, over the last few days, it is running extremely slow.  Web pages won't load or if they finally do it takes forever.  The little spin wheel just keeps going. Sometimes a page will load after a very long time but as I scroll down, only part of the page is there and the rest never loads.  I'm on a wireless connection.  My husbands PC and my iPad are working just fine so it's not the connection.  Any thoughts on what is wrong and how to fix it?  Have not made any changes to my computer.  No new software, updates, etc.

    You are using Safari to surf the web?
    If so, try emptying the cache more often ..
    Command + Option + E
    Then quit and relaunch Safari to test.
    If that doesn't help, try troubleshooting extensions and third party plug-ins.
    From your Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that off if there are any installed. Quit and relaunch Safari to test. If that helped, turn extensions back on then uninstall one a time to test.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow all other plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.

Maybe you are looking for