IPhone 4 Repeated Synching with Exchange 2010

My 4S is set yo with active sync to my office exchange 2010 server. Every few minutes all the entries vanish and it  re-loads in my inbox. It is set up exactly the same as my previous 4 with the same servers which never had this issue. I have also connected my 4S to another exchange eviroment and ge the same effect ie refreshing inbox. Any ideas?

Hitokiri Eric wrote:
How are you syncing to the calendars? Is it through Exchange Active Sync? And exactly which dots are you referring to? The ones on the calendar itself (in month view), or the ones in the list beneath the calendar.
Sorry for not being clear.
I am syncing through iTunes and I am referring to the dots assigned to the actual events, below the month view and in the list view. I do NOT mean the dots in the month view that indicate that there is an event for that day.

Similar Messages

  • IPhone won't synch with exchange server after ios5 upgrade

    I upgraded to ios5 last night.  I did not get the 3002 error however after reboot it asked me about use of location services, etc and then later about the "find my iphone" feature - at this point the phone got stuck - no matter which selection I made when I picked the Done button nothing happened.  I had to do a reset and it came back up OK (not sure what the status is of Find My Iphone feature - but more pressing is the fact that I can't connect to our exchange server.  After putting in my credentials it seems to connect and the name of the mail server gets filled in, but then in the next step it says "Unable to verify account information" and its game over.
    Any thoughts if this is a phone setting or a server setting?  I think we are using Exchange 2003.
    Thanks - Jack Jolly
    CAD Admin, URS Corp

    Not sure what happened - but its working now.  Our IT guys may have done something on the server side.  If I can get any details I will post them.  Look forward to picking up additional tips from this forum!

  • TS4532 Any idea on the timing of the software update to fix the IOS6.1 problems with Exchange 2010?

    Any idea on the timing of the SW update to fix the IOS 6.1 problem with Exchange 2010?
    victor

    In reply to Macca7275
    We moved from Blackberry to iPhone for 120 services in 2010.  We have just renewed the iPhone fleet.  Security was the issue for the business that employs me (lawyers).  When comparing the two, Blackberry performed without issue most of the time but we experienced a number of issues with the trackballs on individual phones. This was, however, the first of the Blackberry Bold models.  The expense behind the scenes was one of the major factors for the move. It was cheaper to run Exchange and iPhones than Blackberry services. Our lawyers on the whole adopted the iPhones and a number have become quite proficient at using them. We ensured that we had a means to securely wipe and lock business phones. We chose Mobile Iron for this purpose but you will find other products to do the same job. Cost is probably going to be the deciding factor here.  Our only negative factor was butterfingers resulting in smashed glass with the iPhones although I have had one user drown several phones.

  • Problem with Exchange 2010, Q10 and attachment

    Q10 & Exchange 2010; unable to download and forward attachment
    Hi all,
    i have a problem with Q10 phone, sync with Exchange 2010 with activesync (not BES) all seem ok but unable to download attach.
    When press "download" didnt start. Unable also to forward same message but i think is a chainde problem.
    Same message from desktop (outlook) or OWA is ok and attach downloadable.
    This is the only Q10 present in company for test so i cannot compare to others BB.
    All other users connected to the exchaneg server have iphone & ipad no issue result. Email service seem ok also for desktop.
    Firmware was updateted about 10 day ago.
    Any idea for me?
    Thanks

    Hi marcottt,
    Could you provide more detail please so I can better assist?
    Do you have this issue with all attachment types? If not, what type of attachment are you having this issue with and what size is the attachment?
    What happens when you try to forward the message? Is any error received?
    Does removing and re-adding the email account make any difference?
    I look forward to your response.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Unity 5.0 compatibility with Exchange 2010 SP2?

    Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

    Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

  • Limitations of SharePoint 2013 integration with Exchange 2010?

    Customer using SharePoint 2013 and looking at whether its possible to integrate this with Exchange 2010 and which features would be available / limitations. Looking for a matrix similar to those found in the Good, Better, Best documents available for previous
    versions. Nothing available on Recently Published content for SharePoint 2013 yet http://technet.microsoft.com/en-us/library/cc262043.aspx

    I haven't seen a specific list, but the three features I've run into that only work with Exchange 2013 are eDiscovery in Exchange, Automatic Task Synchronization with Outlook and the Site Mailbox feature.  There is a Legacy Task Synchronization mode
    available that will work with Exchange 2010 if you turn off the Farm level feature controlling Exchange 2013 task synchronization.  It lets users manually sync specific task lists with Outlook.  But there is no task aggregation.  I found this
    whitepaper helpful for exploring the new features and how to turn them off when using Exchange 2010.
    http://www.microsoft.com/en-us/download/details.aspx?id=38799
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Exchange 2013 DLP with Exchange 2010 mailboxes

    Ive got an Exchange 2007/2010 environment. I've been looking at Exchange 2013 and am interested in the DLP funtionality.
    There are no plans to move mailboxes to Exchange 2013 but would it be possible to install an Exchange 2013 CAS/Mailbox server in my environment and route email through it to make use of the DLP ?
    Current environment consists of Exchange 2010 DAG, Casarray and hub transport servers, and Exchange 2007 mailbox servers, CAS and hub transports. Mail to the internet is sent to a smarthost.
    Thank you.

    Hi Maria,
    DLP Policies are actually a specific transport rule. Since the transport rules with Exchange 2010 didn’t provide such feature to monitor and check the e-mail
    content, I am afraid, in theory, it’s not possible.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Hey i have my iphone is not synching with itune, how can i solve this problem..

    Hey my iphone is not synching with itune, how can i solve this problem?

    It can sync with a 32-bit, so long as you have the correct version of iTunes installed. I'm assuming that you are referring to a Windows based computer, so check out this support document regarding the device not being recognized by Windows. http://support.apple.com/kb/TS1538

  • Cisco Unity Connection Single inbox with Exchange 2010

    I have a new installation of Unity Connection 8.6.2 using single inbox with an Exchange 2010 cluster frontended by a Netscaler load balancer.Functionality that does not work is when a new message comes into outlook and the message is read or deleted it does not update the status on the phone- IE turn off the MWI or if the message is deleted it is still a new message in Unity. If you click reset in the user unified message account, the status gets updated.
    TAC says its a blocked port on Exchange TCP 7080 but that is open.

      I followed this document :
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html
    but when i try to integrate CUC with exchange 2010 , i didn't find is clear enough
    do you have Step by Step more clear than that link becouse my lab very close to your case.
    Regards

  • Iphone 6 sometimes syncs with outlook 2010 calendar and sometimes it won't.  I manually sync to a laptop.

    How do I get my iphone 6 to sync with outlook 2010 calendars and contacts everytime?  I have the correct boxes checked in ITunes and sync to a laptop.

    I am using Outlook 2010.  I bought the Iphone 6 yesterday.  My contacts are syncing perfectly - I created a test contact in outlook and it synced to the phone.  However, my calendar is not syncing.
    I have tried
    Resetting the sync history
    Replacing all information on the phone

  • Songs I purchase on my iphone aren't synching with itunes on my iMac. How do I fix this?

    Songs I purchase on my iphone aren't synching with itunes on my iMac. How do I fix this?

    Transfer Purchases
    Open iTunes and sign in, authorize computer, plug in iDevice.
    Click 'FIle' then 'Transfer Purchases'
    http://support.apple.com/kb/HT1848

  • Does SL Mail/iCal/Address Book work with Exchange 2010?

    Is anyone using Exchange 2010 with Mail/iCal/Address Book (via the Snow Leopard web services interface and not the IMAP interface)?
    My company is about to upgrade Exchange from 2003 to either 2007 or 2010 and since the boss and I both use Macs we want to make sure that SL's apps will work no matter what choice of Exchange server is made.

    SL has not been tested with Exchange 2010 as far as I am aware. 10.6.2 was only tested against the 2007 variant.

  • Does Edge transport server for Exchange 2013 work with Exchange 2010?

    Hello everyone,
    I want to install Edge transport server for my Exchange servers,
    Could you tell me if Edge transport server 2013 works with Exchange 2010?
    Thank you in advance

    Hello
    tip:
    https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
    2   If you want to create an EdgeSync
    Subscription between an Exchange 2010 Hub Transport server and an
    Exchange 2013 SP1 Edge Transport server, you need to install Exchange
    2010 SP3 Update Rollup 5 or later on the Exchange 2010 Hub Transport
    server.
    sorry my english

  • Edge 2013 sp1 with exchange 2010 organisation.

    Dear reader,
    I have an exchange 2010 sp3 organisation with 1 client access server with hub transport and a 2 node DAG. Can I install a stand alone exchange 2013sp1 Edge role on a seperate machine in DMZ and subscribe the exchange 2010 hub transport to it. This
    in preparation to move to exchange 2013sp1 later this year. The current exchange 2010 edge role is installed on a TMG 2010 machine. Since TMG 2010 is dropped and we also have issues with the current edge's mailflow, i'd like to have a dedicated Exchange edge.
    Best regards,
    Ruud Boersma
    MCITP Enterprise administrator

    Sure, You can install Edge of Exchange 2013 on a dedicated server in DMZ and subscribe with Exchange 2010 Transport server.
    Or you can allow the Existing Exchange 2010 Edge server to serve your internet mail flow till the time you implement Exchange 2013 in the environment. I would suggest Exchange 2013 CU5 as a lot of issues were fixed in that which were identified with Exchange
    2013 SP1.

  • Uploading photo from Lync client with Exchange 2010

    We are using Lync 2013 standard edition with Exchange 2010 in our environment.
    In the client, if we go to Tools -> Options -> My Picture, the option to "Edit or Remove Picture" is greyed out.
    I understand this is only available if we're on Exchange 2013, but someone somewhere must have figured out a workaround for this? Anyone know a reg-hack or 3rd party tool that would enable this feature?
    I realize there is a method to turn back on the "Show a picture from a website" via powershell. I have already done this in our environment. However it is quite unrealistic to expect general populace to know how to resize a picture to less than
    30kb (?!) and upload it "somewhere" on the web. Understandably this would be a nightmare for Help Desk having to help people resize their photos and find somewhere to upload it to.
    Any help/ideas would be appreciated!

    You could centrally upload profile photos for your users into the AD's thumbnailPhoto attribute using...
    powershell:
    http://blogs.technet.com/upload-picture
    3rd party software: 
    http://www.codetwo.com/freeware/active-directory-photos/
    http://www.cjwdev.co.uk/Software/ADPhotoEdit/Info.html
    Lync client side upload into Exchange 2010 will not be possible as Exchange 2013 introduced HD photo and storing photos in the mailbox. Take a look at: http://technet.microsoft.com/en-us/library/jj688150.aspx
    Please mark posts as answers/helpful if it answers your question.
    Blog
    Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Maybe you are looking for

  • My install disc doesn't work

    I just got the Quad G5 and the install discs to install bundled software doesn't work. I put it in and it says that the packaged is broken and can't install. I bought the computer from Macmall should they give me a new install disc or should i contac

  • One report, One Source System with multiple Company Codes -- Authorization

    Hello Guys We have 2 DEV source systems for our BI implementation right now. one for US (CCode - 406) an one UK(CCode - 301). We have already completed the implementation for UK with 38 reports. we are right now moving the US implementation. when we

  • Overlapping DID numbers in CUCM 9.1.2

    CUCM connected to the PSTN via SIP. On the trunk in the call manager we strip all incoming down to 5 digits (significant digits = 5) as we use a 5 digit dial plan for all phones. We are now porting 3 DID ranges that will be routed off to a sip trunk

  • Screen Calibration with Huey Pro

    Hey all, I've used Huey Pro software (from work) in the past to calibrate my laptop screen. It had been several months since I had updated it, so I borrowed the calibrater again and I've been trying to get it to work. I cannot for the life of me cali

  • TS1373 plugged in new ipod, doesn't show in itunes

    purchased new ipod nano touch, plugged into computer, doesn't show in itunes, when plugged in just shows as white screen and says do not disconnect, but never does anything.