Iphone 4 replaced dock flex connector/still not recognized by Itunes and charges very slowly
I have an Iphone 4 Cdma Verizon. Had to replace dock flex connector after replacing screen. The phone is not recognized by Itunes or the computer for that matter also when making or receiving calls , mic does not work unless i switch to speaker mode. Operating system IOS 6 . Any Ideas would be greatly apreciated. I have replaced the dock flex connector twice thinking I had a defective part. The charging display is not showing up either on the screen.
I have followed all the steps in the suggested corrections given to other users ( https://discussions.apple.com/message/18364680#18364680#18364680 , https://discussions.apple.com/thread/3956285?start=0&tstart=0) and I still con not get my XP to recognize my iPhone 4. When I follow the steps I get the same the specified location does not contain information about your hardware" error. Any Suggestions?
Similar Messages
-
IPhone 4 (iOS 7.1.1) not recognized by iTunes 11.1.5 on Mac OSX Mavericks. Frustration Station.
iPhone 4 (iOS 7.1.1) not recognized by iTunes 11.1.5 on Mac OSX Mavericks. Have tried all of the recommendations on the apple support site, I am running all current up to date versions of iTunes(11.1.5), Mac OSX(Mavericks), AND iOS 7.1.1 on my iPhone 4 and nothing has worked. Also tried doing some recommendation of deleting some ".plist" files in the preferences as I had seen on this support forum and my iPhone is still not recognized in iTunes at all. I plug my iPhone into my MacBook Pro and it makes the sound like it's connected and charging, but when I go "devices" in iTunes, it is all greyed out. I have had this iPhone since May 2011 and have synced it to this computer numerous times since then, with the last time being before I updated to Mavericks which was sometime in April. Not sure where to go from here, I've tried to delete iTunes and re-install, but when I try to drag the iTunes icon from "applcations", the system tells me I cannot do so as it is required by OSX. So, what gives?
durrrrr. nevermind. re-installed itunes and it looks good for now.
-
iphone 4 is not recognized by itunes and is only on emergency mode, keeps telling me to connect to itunes but when I connect iphone to computer it does not recognize it
Did you try recovery mode? Hold down the home button as you connect it to iTunes. iTunes should pop up a window that says "iTunes has detected a device in recovery mode" and give you the option to restore.
-
ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either. Any suggestions?
Does it light up at all? If not, you could have a battery issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?
Time to replace it: $49 2nd Gen shuffle at online Apple Store...
-
Why is my iPod Nano not recognized in iTunes but charges?
I have a Mac Book Pro and an original iPod Nano. I have old music on my Nano that I want to put on my comp, I have a program for that. But the thing is that even though when I plug in my Nano, it lights up and charges but it isn't recognized in iTunes. How can I fix this? Oh and my screen is broken so I can't reset anything from my iPod itself without like step by step direction because the click sound still works and I guess I can figure out what to do if you say like one click down or 2 clicks down... THANKS!!
iPod not recognized in iTunes and Mac desktop
Otherwise, take the computer & iPod Nano to an Apple store or an AASP. Whichever is more convenient for you. -
My ipod touch is not recognized on itunes and will not turn on or even give me the battery sign that it is dead. I turned it off and it won't turn back on now. The screen is completely black and won't do anything. I have tried charging it over night and nothing happened. It was never near water. I have tried troubleshooting it by holding down the home button and the sleep/wake button, but nothing happened and it didn't work. What can I do to fix it?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591 -
My Ipod touch 4G is not recognized by Itunes and by any computer... what can I do?
My Ipod touch 4G is not recognized by Itunes and by any computer... what can I do?
Take a look at this link, http://support.apple.com/kb/TS1591
-
IPod classic not recognized in iTunes and in Finder, doesn't charge
iPod classic not recognized in iTunes and in Finder, doesn't charge and even doesn't charge outside of Macbook. I've tried rebooting Mac, rebooting iPod, I installed once again iTunes but nothing works Everything was fine until the latest iOS and iTunes update. Please help me :-)
OS X Mavericks 10.9.5; iTunes 11.4Hello,
The cord might be the case, but first, try these suggestions:
Try putting your iPod into disk mode, then try connecting it to your computer again...
<a href="How to put your iPod into disk mode</a>
Do you have a wall charger? If so, then try connecting your iPod to that, and does it charge, or not?
Have you checked this link out?:
<a href="http://docs.info.apple.com/article.html?artnum=60941">iPod doesn't charge correctly
Does your iPod appear in "My Computer"? If so...
iPod shows up in Windows but not in iTunes
If not...
iPod missing in "My Computer" or in iTunes
Post back on what happens when you try these things out. I hope this helps!
~~Kylene -
I have a 3GS iphone. It was jailbroken and working alright.But I was not able to upgrade its IOS frrom 4.0.1 to higher versions and many applicatopns were not compatible with this version of the IOS. So I decided to do a factory unlocking. From an website, based in Mumbai, I unlocked it. When I check now in different websites from my IMEI number, my iphone is unlocked. So I became happy that I can now upgrade my iphone. But the events turned to be different.When I connected to iTunes, iTunes stopped working and my iphone did not appear in the iTunes. I uninstalled and reinstalled iTunes after cleaning previous registry of all relatedd components like Quicktime, Bejour,Apple software updates and mobile softwares. I also used msconfig to troubleshoot conflicts in software of Windows 7 ultimate but still my iTunes is not working, when I connect the iphone. If I do not connect the iphone, iTunes is working alright. Can any friend give me some advice how to proceed. I do not like comments like Jailbreaking is illegal and should not have been done. Please advice me what should I do right now. Thanking you all and expecting some valuable suggestions from this expert community.
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
Iphone not recognized by itunes and my safari also will not open??? Help??
I bought an iphone and synced it. When unplugging it, I realized all my apps I downloaded were gone off the iphone (I did find them in the itunes folder however) but the issue is, my Safari and my itunes program will NOT open. They bounce once and that is it, never opens. No errors, nothing. I have been going insane trying to figure out what the problem is. Anyone else have this issue?
See:
iOS: Device not recognized in iTunes for Windows -
After updating to the latest software, my iPhone 4s and iPad 2 are not recognized by iTunes. I have attempted all of the suggusted material on Apple support. I am not satisfied as these items are needed daily.
Connect the device to the computer.
Quit iTunes if it launches.
Click the Start menu, right-click on Computer, and choose Properties.
In the upper-left corner, click Device Manager. The Device Manager window should open.
Click the plus icon (or disclosure triangle () for Windows 7) next to Universal Serial Bus controllers to expand this selection.
Right click on apple mobile device USB Driver and update it to latest version.
This worked for me.. -
HT201628 My ios device(iphone 5s) is not recognized in Itunes and I am using windows 8.1
My Iphone 5S is not recognized in Itunes. I am using windows 8.1. What is the problem as I am not able to sync anything on the computer to my Iphone 5s?
Use the article about this issue from the support site
http://support.apple.com/kb/TS1538 -
Three 5th gen nanos. One NOT recognized by itunes and computer; other 2 fine.
I have 3 daughters and three 5th gen nanos. I use the same cord, plug and computer, and one is not being recognized by itunes or computer and will not charge; other 2 fine. Something wrong with just the one. Resetting (pressing menu and center until apple appears?) doesn't work. One daughter very SAD. Please help if you can.
Oh, and I've also put it in disk mode. Still not recognized.I think I found the problem, and it may be useful to others. I cosely looked at the dock connector next to the earphone jack and found that it has a chip in it. Not good news for Gen 5 ipod nano's. Apparently, the connector is bonded to the logic board. I did find that if I gently put pressure on it in one directio or the other, it will make a connection.
Must break the bad news to daughter. Sad face. -
The guy at the Apple store said "Now thats a Brick" "I've never seen or heard of one this bad!"
I bought the phone with little to no info on it. I was told that it froze after several failed attempts at loading IOS 6.
Now... It will only turn on if plugged into wall, it will show black, then apple, then "connect to itunes" screen and thats it. As soon as I unplug, it dies. If I try power off, it turns back on and freezes in same place. Reset, same. And unabale to Factory restore cuz I cant unplug from wall. Im asuming its in dfu, nothing works.
When connected to USB,no power, no response from pc (win xp) or Itunes. Although... I swear I heard pc beap once as though it "found new hardware" but on inspection, Nothing.
My theories: 1) Battery is hooped. ( but I was told it worked fine a month ago) The longest I have had it charging is 4hrs and i died as soon as removed.
2) VCC conductor. Would explain USB issue.
3) The phone was "jailbroke" and IOS6 did not like that. Isnt there programs to reverse this?
4) IOS6 interupted, then phone got factory restored. Is it possible there is No "OS" on it?
I never touched an Iphone untill 2 days ago, and I have read and tried every troubshooting solution I could find. If I can fix this I'll be an expert!
Any help appreciated.Hello, chipperp.
Thank you for visiting Apple Support Communities.
Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue persists, try the troubleshooting steps in the first article below. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.
Maybe you are looking for
-
Mid-2010 battery dead after 629 cycles?!?
Hi, My mid-2010 Macbook Pro 15" battery is seemingly dead after only 629 cycles. It says that the condition is "replace now" and the green indicator lights flash when I press the button on the side. It was working fine, and then I didn't use the comp
-
Why does my iPhone 5 keep saying "cannot download" "There is not enough storage to download 'Facebook'. (Btw, I already have fb on my iphone 5, just trying to update it). You can manage your storage in Settings... Well, in settings, I have plenty of
-
Just tried to "Share" a DVD in FCPX...hanging...processing...nothing
I opened the share monitor and it said audio and video successful and just hangs there right at the end doing nothing. FCPX just hangs there saying "Processing" Anyone else seeing this?
-
Logical Grouping of ProfitCenter/CostCenter Records
Hi, I have this scenario where in I got a set of records in the cube which consists ProfitCenter/Cost Center combinations. ProfitCenter is a Hierarchy. Now I need to create a set of logical groups (called Divisions) from these set of combinations. Cl
-
My brother and I both have many problems with our playbooks.
First of all my playbook used to connect to my computer and I soon put all my music and videos onto my tablet, then for some reason it wouldn't connect, it shows up in desktop manager as connecting, my playbook says it is connected, but then it says