Iphone 4 S Camera no longer works after upgrade IOS 7

Recently upgraded to IOS 7 and my camera does not work properly anymore.
Any hint?

Let's see. close out of the built in camera app, double tap the home button and completely close out of it.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
One of my co-workers said she can't use the purchase camera app also, she just update to 7.0.2 iphone 4S.
So the issue might be with the app.

Similar Messages

IPhone 4 apps no longer work after upgrade to OS 5.0.1

After upgrading to 5.0.1 through iTunes, downloaded apps will no longer boot. I get a flash, then nothing.
Of course, Apple wants $70 to tell me how to fix this.
Has anyone else had this problem? Any suggestions? Hard reboots don't work.

Some Users have Reported that a Restore as New has helped Resolve issues...
Set Up as New Device
http://support.apple.com/kb/HT4137

My iPhone 4S speakers no longer work after upgrading to 5.1.1

Everything was working fine for a week or so after upgrading to 5.1.1 and then sounds started to getty buzzy from the speakers and now have gone totally. Every now and then the sound will work for a brief second, but then stop. I can't use the speaker phone anymore either. I have tried turning the phone off and then on again. I have tried hard resets. I have tried restoring it through iTunes and none of this works. Anyone have a know good solution for this?

RalphBittner wrote:
I may have aborted before it was finished, I got a warning message but was in a hurry. Now I wish I could complete.
Stop hijacking unrelated threads.

Camera no longer works after 6.0.1

My camera no longer works after an update to 6.0.1 on iPhone 5. It now will make the noise and animation, but the camera app freezes and won't take the picture. Any luck for anyone else?
EDIT: Scratch that, turning my phone off and then back on seems to have fixed the issue.
Message was edited by: Pichu0102DM

The same powers-that-be fixed the problem for me. It's even more mysterious, since I know I did not restart the computer. I was just surfing along, laboriously using the browser's navigation buttons, when out of habit I pressed the button on the mouse and it worked. It's been working ever since.
Since I notice that 23 other people have this problem (so far), there's clearly something that needs looking at even if the problem somehow corrects itself.

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

Hi russellpaton,
Thanks for visiting Apple Support Communities.
If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
If you can’t use a Bluetooth accessory or car kit
Cheers,
Jeremy

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

IPhoto no longer work after upgrading to Mavericks.

My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

kmg55 wrote:
Just upgraded and Iphoto will not work,
Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device. phone no good without a home button

The button's broken. S**t happens. Apple will replace your phone. If in waranty it will be free of charge. If not, you will pay $149.
You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

Script no longer works after Upgrade to 10.4.6

The following script worked fine using 10.4 thru 10.4.5 but no longer works after upgrading to 10.4.6.
When I highlight a folder and then run the script the highlighted folder is moved to a specific "Achive" folder, depending on whether the highlighted folder has a ".0" or ".1" or etc in its name.
When I run the script using 10.4.6 I get an error indicating that the highlighted folder already exists in the destination.
Anyone else having Applescript problems with 10.4.6?
--Bob
tell application "Finder"
activate
set fname to selection as string
if fname contains "0." then
move selection to folder "ARCHIVE" of folder "0JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "1." then
move selection to folder "ARCHIVE" of folder "1JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "2." then
move selection to folder "ARCHIVE" of folder "2JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "3." then
move selection to folder "ARCHIVE" of folder "3JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "4." then
move selection to folder "ARCHIVE" of folder "4JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "5." then
move selection to folder "ARCHIVE" of folder "5JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "6." then
move selection to folder "ARCHIVE" of folder "6JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "7." then
move selection to folder "ARCHIVE" of folder "7JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "8." then
move selection to folder "ARCHIVE" of folder "8JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "9." then
move selection to folder "ARCHIVE" of folder "9JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end tell

I, too, immediately started having problems with my scripts immediately after updating to OS 10.4.6. I put my scripts in "Library/Applications/..." so that the scripts associated with particular applications are available in the menu bar. I don't know if that has any bearing on the problem, but for me, it was not any particular script, but just about every one that started going funny.
First, I noticed that my scripts would typically work right once, but fail in some odd manner the second time I tried to use one. The second thing I noticed was that the modification dates of my scripts were changing to the time that I last executed the scripts, even though I had not altered and recompiled any of them in weeks. Finally, I noticed that the scripts that were failing were ones in which I had used property statements to initialize some of my variables.
What I think is happening is this: for some strange reason 10.4.6 is recompiling scripts every time they are run, and variables are being initialized, not to the values specified in property statements, but to whatever the variable was the last time the script ended.
I discovered that I could prevent this from happening by (1) recompiling all my scripts to make sure all the property statements were back in effect, and then (2) setting the permissions of all my scripts to read only. This seems to prevent whatever in 10.4.6 is recompiling the scripts from doing this each time the script is run. At least, the modification dates are no longer changing inexplicably, and all my scripts are running reliably again.
It's a bit of a pain to have to remember to reset script permissions to read/write whenever I want to make a change, and then change them back to read only before executing, but it seems to be a reliable workaround. I'd appreciate hearing if anyone else can replicate this phenomenon, or tell me if I'm on the right track.
Jeff Johnson
Dual 1.2 GHz Mac OS X (10.4.6)
Dual 1.2 GHz

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

Back to my mac no longer works after upgrading to Lion

Back to my Mac no longer works after upgrading to Lion
After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

OK, so further investigation has addressed the BTMM issue on a remote machine.
With all machines running lion, I was having issues trying to log in to a standard user headless machine already running. In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login. Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions. This means you can admin the remote computer without bothering the remote user.
The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login. I applied a similar solution to a problem that was related to screen sharing I found on this board. What I believe to be the fix is to add the standard user to the screen sharing user list. Then screen share to the remote account using the standard user credentials.
So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access. Previously I only had admins. This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

Microphone no longer works after upgrade to windows 8.1

After upgrade to windows 8.1 my internal microphone no longer works.
I tried installing updates suggested in other posts with similar driver problems but they did not work.
HPSupportSolutionsFramework-en-11.51.0048 did not work.
My internal microphone is IDT High Definition Audio Codec
When I go through the control panel and look at it - it shows a status of "not plugged in"
Please help
thanks

OK I am a little confused.
There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
However I just received the following email from you:
Hello gordml,
The questions you posted on the HP Support Forum recently received one or more answers.
Question: Microphone no longer works after upgrade to windows 8.1
Date: Sun Dec 21 01:01:56 PST 2014
View the answer(s).
Did this reply resolve your post or question?
If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
You can also show your appreciation by giving kudos.
We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
Thanks for being a member!
The HP Support Forum Team"
Why would this be sent to me if there has been no recent replies on this issue?

My built in camera is not working after upgrading to a new Skype version

my built in camera is not working after upgrading to a new Skype version

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

Iphone 4 S Camera no longer works after upgrade IOS 7

Similar Messages

Maybe you are looking for