Iphone 4 san diego

has anyone been placed on a priority list in san diego for the iphone 4? you should post where and when you were placed on the priority list

my boss and i both signed up for the priority list in fashion valley.
i signed up 6/30/10 and the phone arrived 7/13/10
he signed on or around 7/10/10 and his arrived 7/18/10
it looks like they're getting faster. when did you sign up?

Similar Messages

  • IPhone 4 San Diego (edited)

    has anyone been placed on a priority list in san diego for the iphone 4? if you live in san diego, you should post where and when you were placed on the priority list

    my boss and i both signed up for the priority list in fashion valley.
    i signed up 6/30/10 and the phone arrived 7/13/10
    he signed on or around 7/10/10 and his arrived 7/18/10
    it looks like they're getting faster. when did you sign up?

  • San Diego Locations for Iphone 4 or Just Order ?

    I just was wondering if anyone here know if any of the Apple Stores in San Diego may have the Iphone 4 in stock? Or Should I just order online? I don't expect Bestbuy or AT&T to have them. Thanks for any Info.

    i called a best buy here in LA... i believe it was tuesday or wednesday. Unfortunately i had to work until about 7pm so it wasnt' till then that i called. They said they HAD gotten about 10 or so in, but were now sold out.. bummer.
    I just called 3 walmarts (they open at 8am, it's 830am) and none had gotten any in. I'll be calling all the best buys at 10am when they open. But i heard reports from some best buys last week that they receive theres on tuesdays. (and i also read reports of tuesday, wed, thur, sat)
    sorry for the rambling, that being said, call your local best buys everyday at 10am when they open and ask, and be ready to drive there quick!

  • How are Sprint iPhone speeds in San Diego?

    I heard about how many people experience very slow speeds on Sprint with the iPhone 4s. Is that a problem that affects most people in a given location, or is anything being done to fix it? How are your speeds with it, especially if you are in San Diego?
    I heard that in some places it's ok and others it's very slow, and I heard where it's slow on the iPhone, Android phones on Sprint are ok, and I know the iPhone is just as fast as Android phones on Verizon, so I'm confused about what the problem is. Still, I am interested in an iPhone and am trying to figure out the scope of the problem.

    Thanks slattum99. By any chance can you check speedtest.net's app to see what the speed is exactly? I'm guessing by "good" you mean around 1Mbps, but I ended up getting the iPhone with AT&T and that gets me around 4Mbps. Maybe by the time my contract is through Sprint's speeds will improve even more.

  • PRIORITY LIST - SAN DIEGO

    Please post when and where you were placed on the store priority list for the iPhone 4, and if you have received a pickup email yet. Trying to get an idea here
    Otay Ranch, San Diego, CA
    Priority list: 7/6/2010
    Moving up the list: ?
    Pickup e-mail: Waiting....

    Please delete one of your posts.

  • RESERVATION LIST - SAN DIEGO

    Please post when and where you were placed on the store priority list for the iPhone 4, and if you have received a pickup email yet. Trying to get an idea here
    Otay Ranch, San Diego, CA
    Priority list: 7/6/2010
    Moving up the list: ?
    Pickup e-mail: Waiting....

    nah, i'm good. thanks for the recommendation though

  • 4G LTE slow in San Diego

    Is there something going on in San Diego...Coronado area? Download speeds are HORRENDOUS! I did a download test and it came up at 130kbps. I've been a VZW customer for a long time and for some reason download speeds have always been really bad here. Come on VZW...you're better than 130kbps!

    It may be that there working on the system in your area or are they having any special events in your when they do that can tax the system some what and it cause what your seeing..  You might want to give Customer Service a call and ask for a Tech Rep.. see if there having any issues in your area and while your on the phone with them,  have them check your PRL code.. it may need updating and the rep may have to push it to your phone.. b33

  • Senior Test Automation Engineer LabView Perm Position in San Diego

    Senior  Hardware Test Automation Engineer- LabView
    Company is, headquartered in San Diego, California, is focused on developing technology for the continuous monitoring of glucose in people with diabetes. Company is committed to developing technologies and products that improve the lives of people with diabetes and is currently looking for a Senior Test Automation Engineer.
    Summary
    This position is ideal for a highly self-motivated individual with software and hardware skills to strategize and design custom tools and test automation to meet design, cost and delivery targets. 
    As a Senior Test Automation Engineer, you’ll be bridging R&D to volume production by creating functional tests using LabView for production of Company products.
    Duties & Responsibilities:
    Create automated processes and test systems. Transition new products from prototype to production. Participate in design reviews. Develop test plans. Develop test software and hardware platforms. Review designs for manufacturability, improving cost & quality and increasing yields. Programming in high-level languages or scripting languages to control T&M Instruments and electromechanical systems. Program motion control and data acquisition systems. Develop test strategies to drive test time reduction. Develop test requirements and procedures in concurrence with design requirements. Document test procedures and results in conformance with ISO and FDA standards.
    Required Qualifications:
    Bachelors or Masters Degree in Electrical Engineering or similar discipline. At least 7 years experience in test automation, expert level designing and developing with LabView.  Experience with relational databases.  Experience with C#.  Solid technical and theoretical background of electronics hardware and software.  Demonstrated ability to work effectively in a fast-paced, team oriented, multi-tasking environment and to be willing to do what it takes to meet project commitments and deadlines.  Good interpersonal skills, including good technical communication skills, must be self-directed, self-motivated and be able to work in a cross-functional team environment.  Ability to work in a highly dynamic environment.  Advanced knowledge in setting up ATE test suite running on LabVIEW. Experience leading projects and also interfacing with engineering, suppliers and contract manufacturer. Experience in RF is highly desirable. Advanced software-programming skills. Experience in statistical data analysis tools. PCB in-circuit and functional test knowledge is an asset. Experience in all facets of qualification, including environmental, HALT, and ESD testing would be an asset.
    Please send resume to: [email protected]:  951-303-1841.  Company offers an excellent benefits package and great work environment. 
    Retained Search Firm specializing in TElecom, Medical Devices, Biomed, BioTech, Ate, Semi, Legal, Medical, Real Estate, Commercial Real Estate, IT

    Hi
    I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 2 years of experience with LabVIEW and have the follwoing skills.
    Intermediate-to-advanced knowledge of LabVIEW.
    Familiarity with data acquisition concepts and hardware.
    Ability to troubleshoot electrical and electronic systems at the module and equipment level.
    Discipline and organization with respect to software maintenance and version management.
    Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
    you can reach me at [email protected]
    Please find attached resume.
    Thanks & Regards
    Anil Punnam
    Attachments:
    Resume_Anil.pdf ‏1 KB

  • Demo of Premiere Pro CS6 tonight at the San Diego Premiere Pro Users Group...

    Tonight is the April meeting of the San Diego Premiere Pro User Group. We'll be showing Premiere Pro CS6 and as many of it's new features as time allows. It's free, and kicks off at 6:30pm. All the info can be found here:
    http://groups.adobe.com/group/770
    Hope any of you SoCal residents can come out and join us!

    No, that's not a typo. The files are very small (only 270x480 pixels) at a very low bitrate (roughly 384 kbps or 0.4 Mbps). Thanks for asking.
    -Brian

  • Time Capsule - bought in San Diego USA. MacBook Pro bought in Jakarta, Indonesia. Why won't my Time Capsule set up? All I get is the flashing amber light.

    I bought a Time Capsule in San Diego, California. I bought my MacBook Pro in Jakarta, indonesia where I live. I have Wi Fi in the house which I use for mail etc with my Mac. However, my Time Capsule will not set up, all I get is the amber flashing light. Could it be anything related with a production bought in the USA that may not be compatible (wireless frequency?) with a product bought in SE Asia?

    Did you perform a "hard reset" on the Time Capsule before you tried to set it up?  That would be a requirement any time that you change locations or networks on the Time Capsule.
    Power up the Time Capsule for a few minutes, then hold in the reset button firmly for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.  It is now reset and can be set up to connect to your "new" network.
    Assuming that you have the right wall plug adapter, the Time Capsule will run on 100-240 Volts and 50-60 Hz, so it will operate just about anywhere in the world from a power standpoint.
    There are some differences in allowed wireless channels between the U.S. and S.E. Asia, so use channels......36, 40, 44, or 48 on the 5 GHz band in case the higher channels are not allowed where you are.
    More details here:
    http://en.wikipedia.org/wiki/List_of_WLAN_channels

  • I bought an iPhone in San Francisco and I live in Ecuador, I need a place to claim the world apple warranty in Ecuador, because I have a problem with the screen

    I bought an iPhone in San Francisco and I live in Ecuador, I need a place to claim the world apple warranty in Ecuador, because I have a problem with the screen

    There is no "world apple warranty" on iPhones. As paulcb points out, the warranty is only valid in the country of origin. You will have to bring it to the U.S. or send it to someone you know there to get it serviced.

  • San Diego Comic Con (July 17-21) Breaks 4G !!!

    I was in the Exhibit Hall for the five days of the San Diego Comic Con.  I got my new S4 so I could use Square to take credit cards... but guess what?  During the exact periods that the Exhibit Hall was open (10am to 7pm) there was NO PHONE/INTERNET CONNECTION!!! 
    PLEASE FIX THIS BEFORE NEXT YEAR!!!  There are around 100,000 people at Comic Con who would appreciate it!!!
    I had to borrow a friend's phone who had AT&T and 3G in order to use Square!  She had NO PROBLEMS.  What's up with that??? 
    I know it's unusual to have that much added traffic in one place, but phone/internet connection is CRUCIAL during Comic Con. 
    I was extremely annoyed!

    sagehornung wrote:
    I never had the reboot problem but my signal did seem to drop to 1x in areas with good coverage. My GPS also took 5-10 mins to lock on to my location. These problems were fixed with the recent update (Installed on July 9th). What bothers me is that now the battery life is worse than ever. I even have the 2750 ma battery. 21 mins of talk used 18% of my battery. Just sitting there idle the phone eats up battery now. While the new update fixed some of my problems it definitely made my battery life worse than ever. Do I now need to buy a 5000 ma battery?  This is ridiculous! I was fine with the battery life using the extended battery but now my phone can't even make it through a full day. I am amazed I thought battery life was supposed to improve not get worse. Anybody else notice this problem? 
    I live in San Diego on the fringe of a 4G area so I use Network Mangelow to turn off the 4G and use only CDMA auto(PRL) at home. Any suggestions? This suck! The problem started immediately after the update. I have had this phone over a month and never had battery issues with the extended battery and now I do.
    Hi sagehornung,
    I understand how frustrating it can be to not have enough battery on your phone for an entire day. My first recommendation would be to turn off any applications running in the background: Menu>Settings>Applications>ManageApplications>RunningTab then tap each running application you want to close and tap ForceStop.
    In addition I would recommend removing any third party application installed to switch from LTE/CDMA to CDMA only. You can accomplish the same result following with path: Menu>Settings>Wireless&Networks>MobileNetworks>NetworkMode.
    Switching to CDMA Only is recommended when your phone is constantly switching from 3G to 4G service due to signal coverage as the battery drains while constantly searching for 4G.

  • Bonjour j'ai perdu mes données de l'agenda sur mon iphone , malheureusement sans sauvegarde. Comment faire pour les récupérer?

    bonjour j'ai perdu mes données de l'agenda sur mon iphone , malheureusement sans sauvegarde. Comment faire pour les récupérer?

    Il y a deux façons de récupérer des photos supprimées d’iPhone
    1. scanner directement et récupérer la photo d'iPhone
    a) Connectez votre iPhone à l'ordinateur
    b) Entrez en mode DFU et analyser iPhone
    c) prévisualiser et récupérer les données que vous voulez récupérer
    2. Analyser et extraire iTunes sauvegarde pour récupérer iPhone photo
    a) scanner votre sauvegarde iTunes pour iPhone
    b) prévisualiser et récupérer les données que vous voulez récupérer
    c) Faire bien sauvegarde
    si ces étapes ne vous aider résoudre ce  problème, vous pouvez essayer ici :
    récupération données iPhone
    comment récupérer les données perdus iphone

  • YouTube is working again on Apple TV2 in San Diego.

    It was working properly again when I tried it this morning here in San Diego, CA.  Did not have to do anything like reboot, update firmware, log-in, etc.; it just started working.  Let's hope it stays working.

    As I posted on another thread that Houston, Texas was back up.
    I really want to know who's bright idea at Apple to have the users to jump through all these hoops of erasing the units and reinstalling software... REALLY? COME ON APPLE... YOU CAN DO BETTER THAN THAT.
    Apple you need to have better proceedures than that. How about having someone in a lab setting try testing the problem before you have users erase all the data on the unit. There goes all the favorites and wishlist settings. I can see a re-boot or power-cycle, I get that but to erase and reformate. JEZZZZZZZZZ that is down right S T U P I D!!!!
    This could have been corrected SOONER, if better troubleshooting proceedures were used; instead of sweeping things under the run (so to speak). The idea is if it gets bad enough, that there were be multiple users complaining and then Apple will get off their duffs and do something. MY GOD, Apple has enough money to take care of these sorts of things in a reasonable and cost effective manor.
    It's not that things weren't working or broke... that is life... but to just wait until it gets to a critical mass before trying to work on a real world problem is shoddy!
    -T

  • San Diego, CA: 4G outage?

    My Bionic hasn't had 4G for several hours now.  I'm located in north-eastern San Diego county and was fine until around 11PM Pacific Time.
    Am I alone in this?  Is there more info available?

    Overkill,
    I apologize for any lack of data connection on your device. Is the service restored? Are you still able to get 3G service? Please reply so I and the community can assure you are assisted.
    Thank you,
    AdamE_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • Java error in session initialization Error - When calling IC Web client

    Hi All, When i access the CRM IC web client through browser (BSP page), Page is loading but inside the page im getting the following error. " Java error in session initialization [Error message: abcj2systemid.domain.com: CALL_METHOD(SYS_METHODNAME) s

  • Adobe Air SDK 16.0

    Trying to use newly compiled MoPub ANE with Universal Binary Plugin x86 support for IOS Platform with Adobe Air SDK 16.0 for IOS App, i am encountering this compile time error. Adobe AIR [java] Picked up _JAVA_OPTIONS: -Xmx512m      [java] Picked up

  • Pacman cache share over LAN is a pain!

    Hi fellows. As Arch Wiki - Pacman Tips say, i setup a nfs server in my home server so all the laptops can upgrade packages more quickly and without increasing load in the servers. It all sounds great, but turns out there is one big problem. When a cl

  • Getting Error 08 when attempting to build exe using LabVIEW 2009 (32 bit) and Windows 7

    Testing development platform on Window 7 vs XP. I received following message while building an executable using 2009 32 bit on Windows 7 machine. Same build will work on an XP machine. Error 8 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_App

  • Can not see contact name while receive incoming call.

    Dear Support, I have problem with my iphone while receive incoming call. it doesn't show the contact name even i have save that contact number in my phone arleady. iPhone4, OS:5.1.1 My phone is A number : 090 22 11 57 Other phone is B number : 090 22