Iphone 4 says no sim
I'm using the Iphone 4 on Tmobile network. All of the sudden my phone has started saying 'NO Sim" tried a system restore, did an update, constantly pop the sim out, put it in airplane mode and then back, power off power back on, all of these are temporary fixes. Ordered a new sim card from Tmobile same problem. Please Help me!!!
I should add, I have reset the network and updated to the latest OS.
Similar Messages
-
Pay monthly iphone say invalid sim when put in pay as u go sim
Hi my brother gave me his i phone 4 as he has now had an up grade as his contract had ended. I have put in a pay as you go sim on the same network and it says invalid sim?
Which carrier is this, and where? Some carriers will not permit iPhones on their pre-pay plans - they only allow iPhones on their network with a full voice+data monthly plan.
-
My iphone says your sim is not valid. How can I solve it?
I bought a second hand iphone and put a 2degree sim bit it says your sim I not valid. How can I activate it?
The phone is locked to a carrier different from that for which the sim you are trying to use. You need to find out which carrier the phone is locked to and contact that carrier to see whether they will unlock it for you
-
Why does the iphone say no sim in activation screen when i have inserted the the iphone original sim
i have bought a atnt locked phone, i try to activate it but it says no sim.when i insert the atnt original sim, nothing happens and it still says no sim. What is the problem with it? can a activation sim be used twice?
What is the problem with your sim tray? If you tried to get your sim out using something and accidentally scratched the sim chip, your sim chip is broken and it is not free to fix. On the other hand if other sims work, you can call AT&T and ask for assistance from them.
-
Iphone says incorrect sim after 1.1.1 update
I just updated my iPhone to the 1.1.1 firmware and as soon as it was finished i got a message on my phone telling me to isert an unlocked and valid SIM to activate iPhone, when i have my original in. On Screen it shows that i needed to get a replacement SIM; so i did. And still NO LUCK. I have not unlocked my phone at all.
ThanksI am too a AT&T customer with a valid AT&T SIM card, and my phone too is now hosed
Unbelievable....I wish Apple would at least confirm whether a real AT&T SIM is in the phone before trying to trash all the unlockers who are using the iPhone with non-AT&T SIM's... -
Cannot restore iphone says no sim
my vodafone sim card seems to work but i try and restore the phone to normal settings and will not let me due to 'no sim card'
Try here > iPhone: Troubleshooting No SIM
-
I took my SIM card out and put it back in but now it's saying sim error "invalid sim" what shall I do?
Bethwilletts123 wrote:
I took my SIM card out and put it back in
Make sure it is seated correctly. -
Guys, I just upgraded my iphone 3gs to ios6, it took 2 hours get it installed. However asfter installing there are issues with activating it.
Its getting failed every time..."says the activation server is temporarily unavailable".
Tried activating via itunes but no respite " says No sim inserted".
pls help.No, I did not find a way to fix it. Went to Apple store to be told that the phone is dead and I would need to purchase a new phone. A little frustrated with the fact that it is Apple who caused the phone to not work!
-
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile -
ATT Iphone 6 intermittently says no sim card installed, but works the rest of the time. thoughts?
Had a simalar problem. But we weren't getting any service. AT&T said it was a defective SIM card and pretty much everyone that bought an AT&T iPhone 6 from the online store had a defective sim. had to buy a new sim from best buy because att were sold out because the problem was so wide spread.
-
my iphone 5 won't let me call anyone and it says invalid sim in the top left corner where it should say sprint. i do have wi-fi and i can send texts to people. does anybody knnow how to fix it?
Did you purchase the music through the iTunes Store?
The apps you have purchased can be downloaded for free from the App Store.
http://support.apple.com/kb/HT2519 -
I have restored the settings on my iphone and now after entering the pin on my sim card it wants me to connect it to iTunes but when i try it just says my sim card is not supported... what can i do now? It worked fine before...
natalieduffy wrote:
it says 'your iphone could not be activated because the activation server cannot be reached'
Typically this indicates a device that has been hacked to be unlocked or jailbroken.
If that is the case, no support can be provided here. -
My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about? Any ideas on how to resolve this.
Looks like the Sim card had a catastrophic failure. Burnout, short somethng like that.
You can try to take out the tray and reseat the sim card inside and see if that gets it back.
Also try resetting the phone at least once by holding down the home and power buttons until the Apple Logo shows up.
If none of this works you'll have to contact your cell carrier to get a new sim card, as it probably fried and is no longer functional. -
i updated my iphone 3gs to ios 5.0.1 from ios 4 , now its saying that sim is not activated but the sim is still inside
PLSS HELP ME OUT !!!!Sounds like your phone was hacked to work with any network. Doing the update re-locked it to the original carrier. All you can do now is contact the carrier it is locked to to see if they have an unlocking policy. Note that if it's AT&T they do not offer unlocking. otherwise find an un-activated sim for the original carrier and you can use it as an iPod.
-
If i turn my phone off for a while and turn it back on, I will have service for a couple of minutes. And then it says failure SIM or invalid SIM or no SIM. Then I have no service and can only use my phone with wifi making it no better than a ipod
Could be a bad SIM card or an iPhone hardware problem.
Try a new SIM card first. You can get a new SIM card at an ATT retail store. After explaining the problem, there should be no charge for the new SIM card.
If no change after that, call AppleCare or make an appointment at an Apple Store if there is one nearby. -
After my friend locked me out of my iPhone with too many wrong password attempts I restored my iPhone via recovery mode and now it is showing that picture of a cable leading towards itunes, and itunes says the sim is not supported but it is the original sim. How do I fix this?
Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed.
Maybe you are looking for
-
Employee information missing in CAT2 time entry data view
Hi, We upgrade our system and when we go to time entry data view, we lost the employee information like Personnel number and cost center which displayed before upgrade. I checked with Tcode CAC2, nothing found. But My guess is Personnel number a
-
Shouldn't variables reset each time the frame plays?
In my flash program I have everything on one frame. In the actionscript on that frame, I made a variable called currentButton and set it to the first button, to keep track of which button is currently pressed. In the click function this variable is c
-
Filling in a DWC-10 (Florida Work Comp billing form)
I am trying to replicate Florida's Work Comp billing form. Does anyone know how I can either have 2 subreports or 2 detail sections that do not alternate with eachother however let me allow 3 records in one section and 2 records in another, then movi
-
CS2 created loader, need to update to CS5
Hello I'm just learning about loaders and i have a loader created in CS2 and im using it in CS5 it seems to work correctly but has a few compiler errors. I tried to clean it up but only made it worse, anybody want to take a shot at it: var my_loader:
-
Hi, I would like to know how to write a batch file in windows for dataguard environment. For Example. I woud like to write a batch file to show me the help command. c:\dgmgrl help alter; How do you put these two statements in the batch file in window