IPhone 4 screen jumps around when displaying images.

Hi guys,
My iPhone 4 has randomly started behaving unusually when trying to display images. The problem is at it's worse when using the camera or trying to display photographs. The lighter the image, the worse the problem.
The display seems to shrink and stretch rapidly from the bottom of the display. I also begin to see what should be the top of the screen appearing at the bottom.
Any ideas what could cause it? The phone recently had a new screen fitted.
Thanks in advance!
Sean

Here is a still of the screen... http://www.flickr.com/photos/43074185@N05/12239963166/

Similar Messages

Apps open and screens jump around when tablet is ever so softly flexed/bent

Hi,
I'm experiencing the above explained problem when the tablet is active and is softly bent or put to very soft torsion. It then starts to live its own life, activating the return button or opening the front page clock or Google now, etc... It's seems unormal for the touch screen to be so over-sensitive to outside force on the construction.
Is anybody else experiencing the same problem?
Sony: Will the display over-senstivity to soft outside flexing of the construction (without touching the screen) be dealt with in any coming firmware update? My model is SGP311, version 4.1.2 and build no. 10.1.C.0.370 (Norway)

I see you have a bad case Faldo.. Sweden?
I bought mine in Norway.
Jus for the fun of it I got a new one to test if I will have the same experience. And yes I have.
Sony: It's identifying info is:
Country: Norway
Operator:NA
IMEI/serial nr:430100350002588
Build number:10.1.C.0.370
This tablet is the nicest out there in addition to its water and dust resistance, It's a shame that these minor issues destroy XTZ's chase for perfect.
I hope all of you in Sony are well informed of all issues, and that most of these will be sorted out through swift firmware updates.

How can I get rid of the dark area on top one third of my iphone screen which spoils my background image?

How can I get rid of the dark area on top one third of my iphone screen which spoils my background image?
It seems this problem is caused by the software to increase the readibility of upper letters (clock battery etc.) It be nice to leave us the control of choosing background letter color too if we are using brighter images or darker images.
I'm using iphone 4s and it appeared after I updated to new patch. 7.1.1.
Thanks,
Cem
I do not know how to move topics from sections of forum so I apologise for duplicate post.
https://discussions.apple.com/message/25594879#25594879

Photo added.

How do i keep my cursor from jumping around when i am typing

how do i keep my cursor from jumping around when i am typing [email protected]
== This happened ==
Every time Firefox opened
== none

Check your settings in System Preferences > Trackpad
Try a different Tracking speed.
Sometimes just cleaning the trackpad can avoid erratic cursor behavior.
How to clean Apple products

Screen keeps jumping around when I try to do my farming?

I love fire fox but my screen just keeps jumping around. For instance when I am trying to give gifts to my farmville neighbors. When I press send the whole screen will jump. I will have just a brown on the side of the screen then it slowly comes back. Can you please help. I would hate to go back to the internet.

I love fire fox but my screen just keeps jumping around. For instance when I am trying to give gifts to my farmville neighbors. When I press send the whole screen will jump. I will have just a brown on the side of the screen then it slowly comes back. Can you please help. I would hate to go back to the internet.

In I tunes, when I try to move an IPAD AIR app to a different screen, as I drag it, the screens "jump" around making it impossible to move the app. Any clues?

In I tunes, when I try to move an IPAD AIR app from one screen to another, when I go to drag the APP the screens become moving targets and I cannot movve the app. Anybody know why? Is ther a setting somewhere? already tried making screens appear bigger and smaller,no help. Was able to do it on older versions of system and ipads.

Re-arrange apps on iTunes
You need to double-click a page in order to re-arrange the apps on it.

IPhone screen shakes violently when scrolling/dragging pages

Hi,
I have a 1.5 month old black 32g iphone 3GS (3.1.3) that has recently started experiencing a sporadic problem with the screen. When I'm dragging/scrolling on the screen (either scrolling through emails, or scrolling on a webpage, or even dragging a photo around), it begins to shake up and down very quickly and violently, and sometimes jumps around to different parts of the page without me doing anything other than just dragging like I always do.
The problem seems to go away after a while, but will come back randomly, sometimes within a few hours, or sometimes not until a few days later.
This has been happening for about 2 weeks now. The screen is in perfect condition, no scratches, no dust underneath it, so Im baffled about why this is happening.
Is anyone else experiencing this?

I'm having the same problem with my iPhone 3gs. I'm currently at a genius bar, and they need me to replicate the issue inorder to service the iPhone. Anyone have an idea as to the cause of this, or how to replicate it on demand or the apple genius to see? I've had mine for nearly a year and am afraid tha my warranty will run out before I can have apple fix the issue. Any help will be greatly appreciated!

How do I stop sections of screen losing or not displaying image

I am intermittently experiencing sections of screen disappearing and not displaying the image this is not all the time as screen seems to flash eg when selecting messages to delete in my email a column section does not display this happened after I had to reset my firefox settings to remove a nuisance ads program.......I need advice how to fix please

You can check if there is an update for your graphics display driver and check for hardware acceleration related issues.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
You can try to disable OMTC and leave hardware acceleration in Firefox enabled.
*<b>about:config</b> page: <b>layers.offmainthreadcomposition.enabled</b> = false
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Mouse & Screen Jump around at various times

If I left my mouse stand still the mouse cursor will jump around. Also, the screen will automatically switch screens moving to the left or to the right to a new screen or sit there half way. It's happening while typing this message. Also the mouse pad on the laptop is diabled at times.
Very frustrating as it is difficult to get work done with the mouse jumping around and screen moving in different directions.
Seems like the Lion Software is possessed

donnafr wrote:
I have the same problem. Brand new imac and I'm new to Lion and hate it so far. I'm trying to do painstaking graphics work and the window and/or cursor start leaping around. And I can't figure out any cause. It often happens when I've leaned back to look at the graphic so I'm not touching anything. Possession? Maybe. Faulty battery? No.
Sorry to hear that your cursor too has started "acting up." Commiserations. However, I'm glad to read that you've positively identified the fact that a faulty battery is not the culprit. Good on you! I can only reiterate that, when this exact same problem happened on my MacBook all those months ago, my battery replacement (free from Apple, because it was under warranty) stopped the problem.
Russel

Touchpad pointer jumps around when connecting to HDMIt

Greetings,
I have been using the HDMI port of my Macbook pro retina for 1 year with my samsung LCD,
and yesterday while im connected through the hdmi my touchpad
is completely erratic, jumping around and self clicking.
Before i had no problem!
when i disconnect the Hdmi cable everything is fine again.
Pleast help, any ideas why suddenly my touchpad is behaving like this?
Many thanks,
Nico

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad or mouse, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. A defective peripheral device or a damaged cable can cause the built-in trackpad of a MacBook to behave erratically. If you're using any wired peripherals, disconnect them one at a time and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

Iphone screen is black when I remove the phone from my ear; can't end call

This is annoying! It doesn't happen all the time -- only some of the time but at least two times a day. The phone works but it just doesn't show the "end call" option -- or anything for that matter. I can turn it off when I have my headset on but if I don't have the headset on, I have to press the lock key on the top of the phone to get it to do anything. Then it locks, and then when I touch the on button at the bottom of the phone, it shows the display again. Anyone have any ideas or should I take it in?

Hey jps42247,
Do you have a protective case on the iPhone? If its covering the Proximity sensor on the iPhone, the iPhone could think the phone is still being held up to your head. In that case the iPhone screen would remain locked so the call could not be ended accidentally.
If you don't have a case on the iPhone, try resetting or restoring the iPhone.
http://docs.info.apple.com/article.html?artnum=305743
http://docs.info.apple.com/article.html?artnum=305744
Jason

Transform Effect jumps around when Collapse Transformation is enabled

I created a reflection on one of my vector based animated layers. Then decided to apply reflection with Transform effect.
It all held true before I assigned "Collapse Transformation" and my Transform effect is going awry. Basically because there is zoom out with the camera and scale as well.
Transformation's Anchor points and Distance are note keeping up with the movements and reflection is jumpint all over the place.
Where should this Transformation effect be applied. On the first level when I created my PreComp1 with all the layers (and then PreComp1 is getting nested within other PreComps) or at the very end at the Final PreComp for render I should apply this effect.
It seems to jump around in any case...

I read the help, it states that Collapse Transormation buttons treats the PreComp as seprated layers, which preserved 3D treatiment for casting shadows and does not cut off shapes by PreComp size.
It seems to work for me that I check continuosly rasterize on each individual illustrator imported layer (inside the PreComp1), so when I enlarge the shapes they stay crisp. Then I keep on checking Collapse transformations on all consequtive PreComps and everything stays sharp.
My question is at what stage I would better apply Transform effect, which doesn't seem to work. Should it be on the PreComp1 layer with all the Continuoiusly rasterize enabled or on final Render Out PreComp where "Collapse Transformations" is checked off?
In eather way because of movement of these illustrator layers, Transform position seems to be fixe on screen, but is not relevant to shape movement whithin the PreComp1.
What previously worked for me was that I applied Transformation on each individual illustrator layer, however I did not enable "Collapse Transformations" in and consequtive PreComps. As soon as this feature is enabled everything goes awry....

Source code jumps around when re-opening page?

Is the following a common problem with Dreamwver CS4 Source Code view?
In an effort to make the code read nice and neat, like everyone else I try to indent and nest my code. For example:
<div>
          <ul>
                    <li>one</li>
                    <li>one</li>
                    <li>one</li>
          </ul>
</div>
But, upon saving a file and then later reopening it, I notice that in places the file does not keep my intended spaced nested layout i.e. the code jumps around on a line and I lose my neat indent spacing. For example:
<div>
          <ul>
      <li>one</li>
                    <li>one</li>
                    <li>one</li>
             </ul>
</div>
I have tried to set my preferences > code format > tab size to 10 to produce a larger indent which has improved the problem a little but not fixed it.
Others must have experienced this frustrating problem.
Is there anything I can do to fix it, like set further preferences to give me complete control over the page?
Thanks in advance.

Oh can it? I will look into this thanks Ken.
With regards the CSS, I found out about it on Lynda.com training videos.
- Dreamweaver CS4 with CSS Essential Training > Chapter 13: Testing and Deploying CSS > Formatting code for deployment
The process is as follows:
On Dreamweaver CS4 click Edit > Preferences > Code Format > CSS (button)
On the CSS Source Format Options screen, de-select the "Each property on a seperate line" check box and click "OK" and then "OK".
Then on your CSS page, in the left side panel, click "Format Source Code" and the "Apply Source Formatting" selection.
The code will then condense for deployment.
You can reverse the process just as easily going backwards.
If anyone else has any ideas on code jumping around on a line please do let me know. Thanks.

My iphone screen goes crazy when it charges

Hey there,
Whenever I charge my iPhone my screen goes crazy when I touch it. If i'm typing whilst its charging it clicks random things and deleted what i've typed. The phone works completely fine when its not charging and I haven't had any other problems with it. I have the iPhone 5c iOS 7.1.1 (about to update after this post).
If anyone could help me that would be great!
Ps. Someone posted a video and my phone does the same
https://www.youtube.com/watch?v=QbsNCjbs-xg

I have the same exact problem and I use an Apple charger and lightning wire cord. Resetting the phone doesn't work and neither does shutting it off and turning it back on. It is infuriating to say the least, especially because this stupid phone spends more time on the charger than off. The battery is crap.

Possible to bypass monitor profile when displaying image?

After importing a large photo library into Aperture I noticed that when viewing images, they would change color and in a little under a second the colors looked significantly less "colorful and rich" than before. Sounds "subjective" but it really is not. There is definitely a transformation going on and the colors consistently become duller on every image viewed. It is especially noticeable in a album of images taken in the fall using a circular polarizer where the colors looked really great to begin with and then extremely dull after the transformation. I deleted all of the preview images and set aperture to not regenerate them. Still, same issue occurred. The issue occurs with both RAW and jpg images.
In Canon Image Browser on the Mac colors look great. It's easy to do an A to B comparison of the same file and see that it looks better in every case.
But what I've discovered is that I can get the same "dulling" result to occur using Canon's Image Browser 6.x software just by setting one option.
There is an option checkbox in Preferences that is disabled by default to "Adjust Image Colors Using A Monitor Profile." Prior to setting that option, the colors looked great, just like they looked on the camera LCD, and they same as they look on my PC also using Canon Image Browser software and Irfan view. The rich colors seen when not using monitor profile also match what I see in Safari, Chrome, and Internet Explorer browsers.
In Canon Image Browser when I set the checkbox to "Adjust Image Colors Using A Monitor Profile" the colors become very muted. They look identical to what I see in Aperture. Also, I can get the same effect to occur on the PC version of Canon Image Browser. Microsoft's "Windows Photo Viewer" seems to be monitor profile aware as it shows the same dull colors. "Windows Photo Viewer" offers no option that I can find to improve the look of the color. Maybe this is what you want if you're trying to print your images and have them match exactly what is seen on screen.
I have found that with Photoshop CS5 I can export a jpg to tiff which strips out the color space information and then voila the image "pops" when I bring it into aperture and looks the way it does in Canon Image Browser without using monitor profile. In fact you can really then compare within Aperture how big the difference is between the two, and the only thing I did was resave the image to a new file format without doing anything else in photoshop. It's not feasible to resave evertthing as tiff though.
So my main question is, is there a way within Aperture to bypass the monitor profile so I can see the images with the same colors as they are rendered in the majority of the other tools I use.

I've done some additional testing on a jpeg image.
Test 1:
Canon Image Browser: "Preferences/Adjust Image Colors Using a Monitor Profile" is unhecked
Photoshop CS5: "View/Proof Setup" is set to "Monitor RGB"
Aperture: "Onscreen Proofing" enabled and set to "Generic RGB" Additionally I've tried every other color profile available
Result: The colors look identically rich on Photoshop and Canon Image Browser. Aperture is the only tool I can't get to align with the rich colors.
Test 2
Canon Image Browser: "Preferences/Adjust Image Colors Using a Monitor Profile" is checked. Restart the software to apply change.
Photoshop CS5: "View/Proof Setup" is set to "Internet standard sRGB"
Aperture: "Onscreen Proofing" enabled and set to "sRGB"
Result: The colors match on all 3 tools. The color are very noticeably less rich than in Test 1.
I went ahead and previewed the image in the browsers on the Mac. Chrome and Firefox showed the color the same as Photoshop and Canon Image Browser did in Test 1 which looks better in my opinion.
For Safari color looks the same as Test 2.
Also Apple Preview looks the same as Test 2 no matter which soft proofing setting is applied.
I believe Adobe and Canon have the correct behavior and show either richer or duller colors depending on which "proofing" mode they are in. Only aperture so far cannot be made to do the richer colors.

IPhone 4 screen jumps around when displaying images.

Similar Messages

Maybe you are looking for